Public Notice No. 37 (RE-02)/2002-2007, Dated: 03.10.2002

(TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY PART-1-SECTION-1)

GOVERNMENT OF INDIA

MINISTRY OF COMMERCE & INDUSTRY

DEPARTMENT OF COMMERCE

PUBLIC NOTICE NO. 37 (RE- 02)/ 2002-2007

NEW DELHI : DATED : 03/10/2002.

Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.

2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.

3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure “A” to this Public Notice shall be made.

4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-

CHEMICALS AND ALLIED PRODUCTS

After the existing entry at Sr.No.A-3016, the new entries at Sr.No.A-3017 to A-3034 shall be added as per Annexure ”B” to this Public Notice.

-:2:-

ENGINEERING PRODUCTS

After the existing entry at Sr.No.C-1798, the new entries at Sr.No.C-1799 to C-1809 shall be added as per Annexure ”C” to this Public Notice.

MISCELLANEOUS PRODUCTS

After the existing entry at Sr.No.K-152, the new entries at Sr.No.K-153 to K-154 shall be added as per Annexure ”D” to this Public Notice.

5. This issues in public interest.

( L. MANSINGH)

DIRECTOR GENERAL OF FOREIGN TRADE

(R. C. SAINI)

DIRECTOR GENERAL OF FOREIGN TRADE

FOR DIRECTOR GENERAL OF FOREIGN TRADE

-:3:-

Annexure “A” to the

Public Notice No. 37

Dated: 03/10/2002

AMENDMENTS/CORRECTIONS

Sr.No.	Page No.	Reference	Amendments/Corrections
1	2	3	4
1.	197	Chemicals & Allied ProductsSr.No.A1640	The norm covered by this entry shall be substituted by the following:-

Sr.No.	Export Item	Qty.	Import Item	Qty. Allowed
A1640	Monoceotophos 40% WSC (Monocotophos 40% SL)	1 kg	1. Mono methyl Aceto Acetamide 70% min. (MMAA)2. Trimethyl PhosphiteOR2(a)Yellow/WhitePhophorus2(b)Methanol3. Methanol (as solvent)OREthylene Dichloride4. Cyclohexanone	0.432 kg0.356 kg0.128 kg0.355 kg0.179 kg0.120 kg0.412 kg

-:4:-

2.

241

Chemicals & Allied ProductsSr.No.A1875

The norm covered by this entry shall be substituted by the following:-

Sr.No.	Export Item	Qty.	Import Item	Qty. Allowed
A1875	Upgraded Beneficiated (Synthetic Rutile) containing Titanium Dioxide 95%	1 kg	1. Ilmenite Ore containing Titanium Dioxide 54%2. Coke	2.0 kg0.182 kg

3.

267

Chemicals & Allied ProductsSr.No.A2101

The norm covered by this entry shall be substituted by the following:-

Sr.No.	Export Item	Qty.	Import Item	Qty. Allowed
A2101	Metoprolol Tartrate	1 kg	1. 4-Methoxy Ethyl Phenol2. Epichlorohydrin3. Mono isopropyl Amine4. Tartaric Acid	0.77 kg0.70 kg1.50 kg0.24 kg

4.

4-5

Chemicals & Allied ProductsSr.No.A2030 (as amended vide Public Notice No. 27 Dated:01.08.2002)

The norm covered by this entry shall be substituted by the following:-

Sr.No.	Export Item	Qty.	Import Item	Qty. Allowed
A2030	Phenidone A (1-phenyl, 3-Pyrazolidone)	1 kg	1. Phenyl HydrazineORa) Anilineb) Sodium Nitrite2. Acrylamide3. Caustic Soda4. Isopropyl Alcohol	1.124 kg1.137 kg0.830 kg1.0 kg1.15 kg1.00 kg

-:5:-

5.

482

Engineering Product Sr.No.C27

The quantity of import item at. Sr. No. 1 shall be amended to read as under:-“1. Aluminium Scrap – 1.10 MT/MTof Aluminiumcontent in theOR export productAluminium Ingot – 1.06 MT/MTof Aluminiumcontent in theexport product

6.

705

Engineering Product Sr.No.C1052

The norm covered by this entry shall be substituted by the following:-

Sr.No.	Export Item	Qty.	Import Item	Qty. Allowed
C1052	Inlet/ Exhaust Valves	1 kg	1. Valve Steel (Alloy Steel/ Non-Alloy Steel) BarsORInconel Alloy 75 1Bars2. Hard Facing Metal Alloy Powder of Grade Ni60, Stellite 1, 6 and 12	1.40 kg/kg content in the export product1.20 kg/kg content in the export product10 gms/valve

7.

705

Engineering Product Sr.No.C1053

The norm covered by this entry shall be deleted.

-:6:-

8.

746

Engineering Product Sr.No.C1214

The description of export item shall be amended to read as under:-“Valve Stems made of Brass”

9.

766

Engineering Product Sr.No.C1341

The norm covered by this entry shall be deleted.

10.

780

Engineering Product Sr.No.C1382

The description of export item shall be amended to read as under:-“Armoured / Un-armoured PVC Insulated Submersible/Flexible / Control Purpose Copper Cable rating upto 1100 volts, not elsewhere specified”

11.

781

Engineering Product Sr.No.C1390

The norm covered by this entry shall be substituted by the following:-

Sr.No.	Export Item	Qty.	Import Item	Qty. Allowed
C1390	Aluminium Gravity Die Cast Articles	1 MT	1. Aluminium ScrapORAluminium Ingots	1.10 MT/MT content of Aluminium in export product1.06 MT/MT content of Aluminium in export product

-:7:-

12.

851

Engineering Product Sr.No.C1661

After the description of import item at Sr. No. 4, (with quantity) the following new import item shall be added:-“5. Relevant Screw – 1 No. on netto net basis”

13.

24

Engineering Product Sr.No.C1784 (amended vide Public Notice No. 20 Dated:01/07/2002)

The norm covered by this entry shall be substituted by the following:-

Sr.No.	Export Item	Qty.	Import Item	Qty. Allowed
C1784	Pest Repellent Model POBD-1-01	1 No.	1. Relevant Capacitor2. Relevant Varistor3. Relevant Triac4. Relevant Resistors5. Zinner6. Light Connector7. EL Display8. Polycarbonate Compound9. Copper Wire (Super Enamelled)10. Copper Clad Laminates	Net to netNet to netNet to netNet to net1 No.(Net to net)1 No.(Net to net)1 No.(Net to net)1.05 kg/kg content in the export product0.17 kg/kg content in the export product1.01 kg/kg content in the export product

-:8:-

11. Imaging/ Photo printing Dry Film Photo resists12. Solder Mask Ink-cum- Catalyst/ Hardner13. Relevant Microchip

1.05 kg/kg content in the export product1.05 kg/kg content in the export product1 No.

14.

907

Food Product Sr.No.E-11

The description of export item shall be amended to read as under:-“Fruit Slices and other edible products/ Chutneys/Condiment Paste/Vegetables/ Pickles packed in OTS Cans / Glass containers/ packed in relevant packing material”

15.

1015

Plastic Products Sr.No.H-304

The description of import items at Sr. NoSr. 1 & 2, (without any change in quantity) shall be amended to read as under:-“1. Spectacle Front of relevant Brand / makewith or without metal fittings2. Spectacle Sides of relevant Brand / makewith or without noted fittings”

16.

33

Plastic Products Sr.No.H-507 (as notified vide Public Notice No. 20 Dated:01/07/2002)

1. The description of export item shall be amended to read as under:-“Fragrant & Designed Polypropylene Mat”2. The quantity of import item at Sr. No. 4 shall be amended to read as under:-“94 kgs and cif value upto 20% of FOB value of export”3. The quantity of import item at Sr. No. 6 shall be amended to read as under:-“2 NoSr.”

-:9:-

17.

34

Textile Products Sr. No. J-353 (As corrected vide Public Notice No. 20 Dated:01.07.2002)

The quantity of import item at Sr. No. 2, shall be corrected to read as under:-“1.05 kg/kg content in the export product”

18.

1123

Miscellaneous Products Sr.No.K-32

The norm covered by this entry shall be deleted.

19.

1136

Miscellaneous Products Sr.No.K-103

The description of export item shall be amended to read as under:-“Absorbent Cotton Wool B.P.C./B.P./I.P.”

20.

1137

Miscellaneous Products Sr.No.K-107

The description of import item at Sr. No. 1, (without any change in quantity) shall be amended to read as under:-“Polymethyl Metha Acrylate Sheet (Thickness upto 3.00 mm)”

-:10:-

Annexure “B” to the

Public Notice No. 37

Dated: 03/10/2002

CHEMICALS AND ALLIED PRODUCTS

Sr.No.	Export Item	Qty.	Import Item	Qty. Allowed
A3017	Penta Adipate Stearate	1 kg	1. Penta Erythritol2. Adipic Acid3. Stearic Acid	0.198 kg0.217 kg0.800 kg
A3018	Farmazan Base	1 kg	1. Ortho Amino Phenol2. Ortho Nitro Toluene3. Copper Sulphate (Penta Hydrate)4. Benzaldehyde	0.614 kg1.361 kg0.614 kg0.334 kg
A3019	Para Chloro Benzaldehyde (4-Chloro Benzaldehyde)	1 kg	1. Para Chloro Toluene	1.550 kg
A3020	1, 3-Dibromo-5, 5-Dimethyl Hydantoin	1 kg	2. 5,5 Dimethyl Hydantion3. Liquid Bromine	0.526 kg0.621 kg
A3021	Alpha Terpeniol perfumery grade minimum purity 99%	1 kg	1. Gum Terpentine containing Alpha Pinene 82.5%ORAlpha Pinene	0.17 kg1.608 kg
A3022	Alpha Terpenyl Acetate perfumery grade minimum purity 99%	1 kg	1. Alpha PineneORGum Terpentine Oilcontent 82.5% ofAlpha Pinene	0.17 kg1.825 kg

-:11:-

A3023	Amber Fleur (2,3,8,8 – Tetramethyl – 1 to 8 – Octahydro – 2 – Naphthalenyl Mehtyl Ketone)	1 kg	1. Beta Pinene2. Methyl Ethyl Ketone	0.17 kg0.650 kg
A3024	Acrylic Polymers in primary form (RAN-1000) (solid content 36+/-3%)	1 kg	1. Acrylamide2. Dimethyl Aminoethyl Methaacrylate3. Emulsifier4. Solvent Oil (Paraffinic)	0.339 kg0.029 kg0.062 kg0.236 kg
A3025	Diphenyl Methane	1 kg	1. Benzene2. Benzyl Chloride3. Aluminium Chloride	0.516 kg0.837 kg0.120 kg
A3026	3 Chloro Methyl Pyridine HCL	1 kg	1. 3 Pyridine Methanol	0.740 kg
A3027	Pigmented Chips	1 kg	1. Relevant Resin such as Nitro Cellulose Resin/ Polyamide Resin/ Vinyl Resin/ Acrylic Resin2. Relevant Organic/ Inorganic Pigments3. Relevant Platisiazer such as Dibutyl Phthalate / Acetyl Tributyl Citrate/ D.O.P/ Centisizer/ Epoxidised Soya Oil4. Solvent i.e. Ethyl Acetate/ Toluene/ IPA/MEK	0.17 kg/kg content in the export product0.17 kg/kg content in the export product0.17 kg/kg content in the export product0.20 kg

-:12:-

A3028	Tinted Float Glass	1 MT	1. Soda Ash2. Sodium Sulphate3. Silica Sand4. Dolomite5. Feldspar6. Iron Oxide7. Sodium Nitrate8. Nickel Oxide9. Cobalt Oxide10.Sodium SeleniteORSelenium11.Slag12.PMMA13.LSHS/Furnace Oil	275 kg11 kg909 kg224.9 kg60 kg2 kg0.17 kg0.621 kg0.17 kg0.14 kg0.00756 kg4 kg0.0469 kg266.73 kg
A3029	Art Paper Coated One Side	1 MT	1. Wood Pulp2. Calcium Carbonate3. Latex (50% concentration)4. Wet end chemicals (Retention Aid, AKD dimer of Fatty Acid, AKD Emulsifier Resin 216, AKD Stabiliser 472 optical Brightening Agent, Dispersent, Cationic Starch, Oxidized Starch)5. Coating Chemicals (Carboxyl Methyl Cellulose, Poly Vinyl Alcohol, Hardner Lubricant, Antifoamer, Optical Brightening Agent, Dispersant	0.8587 MT0.2325 MT0.0520 MT0.0558 MT0.01356 MT

-:13:-

			6. Stretch Film7. Poly Kraft Paper	As per packing PolicyAs per packing Policy
A3030	Art Paper (Coated (2 Side Coated Art Paper)	1 MT	1. Wood Pulp2. Calcium Carbonate3. Latex (50% concentration)4. Wet end chemicals (Retention Aid, AKD dimer of Fatty Acid, AKD Emulsifier Resin 216, AKD Stabiliser 472 optical Brightening Agent, Dispersent, Cationic Starch, Oxidized Starch)5. Coating Chemicals (Carboxyl Methyl Cellulose, Poly Vinyl Alcohol, Hardner Lubricant, Antifoamer, Optical Brightening Agent, Dispersant)6. Stretch Film7. Poly Kraft paper	0.8100 MT0.3351 MT0.0774 MT0.0740 MT0.0194 MTAs per packing PolicyAs per packing Policy

-:14:-

A3031	Uncoated Paper	1 MT	1. Wood Pulp2. Calcium Carbonate3. Wet end chemicals (Retention Aid, AKD dimer of Fatty Acid, AKD Emulsifier Resin 216, AKD Stabiliser 472 optical Brightening Agent, Dispersent, Cationic Starch, Oxidized Starch)4. Stretch Film5. Poly Kraft paper	0.9164 MT0.0973 MT0.0752 MTAs per packing PolicyAs per packing Policy
A3032	1/S Coated Art Board	1 MT	1. Wood Pulp2. Calcium Carbonate3. Clay4. Latex (50% concentration)5. Wet end chemicals (Retention Aid, AKD dimer of Fatty Acid, AKD Emulsifier Resin 216, AKD Stabiliser 472 optical Brightening Agent, Dispersent, Cationic Starch, Oxidized Starch)	0.925 MT0.117 MT0.033 MT0.021 MT0.047 MT

-:15:-

			6. Coating Chemicals (Carboxyl Methyl Cellulose, Poly Vinyl Alcohol, Hardner Lubricant, Antifoamer, Optical Brightening Agent, Dispersant)7. Stretch Film8. Poly Kraft Paper	0.017 MTas perpackingpolicyas perpackingpolicy
A3033	Viral Vaccines	1000000 Doses	1. Minimum essential medium (MEM) and Foetal Calf Serum (Foetal Bovine Serum)2. Miscellaneous Chemicals for Viral Vaccine production such as D-Sorbitol Gelatine Food Grade, Lactalabumin Hydrolysate, L-Alanine, L-Arginine, L-Histadine, Tricine Soyabean Casein Digest Media Trypsin, L-Glutamine	531.57 Ltr.upto 1.5% of FOB value of exports

-:16:-

			3. Consumables, such as Disposable Plastics Wares, Glasswares, Filters and Filter Aids, Testing Kits, SPF Eggs (Specific Pathogen Free Enggs) Media Bags and Accessories, Sterilisation Indicators4. Packing Materials:(i) Aluminium Caps/ Seals(ii) Cold Chain Monitor Cards(iii) Glass Ampoules/ Sterile Water for Injection(iv) Glass Vials(v) Monitor Mark Dual Temp, Indicating Tag	891 NoSr.Net +10% wastage1215 NoSr.Net+15% WastageNet+15% Wastage1215 NoSr.
			5. Rubber Stoppers6. Corrugated Boxes7. Thermo Cole Boxes(EPS Boxes)	Net+10% Wastage1167 NoSr.1167 NoSr.

-:17:-

A3034

Bacterial Vaccines

1000000 Doses

1. Consumables such as Disposable Plasticwares, Glass wares, Filters and Filter Aids2. Miscellaneous Chemicals for Bacterial Vaccine Production such as Aluminum Phosphate Gel, Thiomersal, Aluminium Chloride-6 Hydrate, Casamino Acid, Dextrose, Sodium Chloride, Sodium Hydroxide, Soyabean Casein Digest Media, Tri Sodium Ortho-Phosphate, Tryptone T, Ammonium Sulphate, Fluid Thioglycollate Medium3. Packing Materials:1. Aluminium Caps/ Seals2. Cold Chain Monitor Cards/Monitor Marks, Dual Temp. Indicating Tags/ Shipping Indicators

212 NoSr.upto 4% of FOB value of exportsNet +10% wastage350 NoSr.

-:18:-

3. Glass Ampoules/ Sterile Water for Injection4. Glass Vials5. Rubber Stoppers6. Corrugated Boxes7. Thermo Cole Boxes (EPS Boxes)

Net+15% Wastage}Net+15% }WastageNet+10% Wastage525 NoSr.525 NoSr.

-:19:-

Annexure “C” to the

Public Notice No. 37

Dated: 03/10/2002

ENGINEERING PRODUCTS

Sr. No.	Export Item	Qty.	Import Item		Qty. Allowed
C1799	Cylindrical Air Intake Filter/ Pulse Jet Air Filter	1 No.	1. Relevant Filter Paper		1.02 kg/kg content in the export product
C1800	Non – Aerosol Spray Pump / dispensers	1 No.	1. Relevant Module Sub. Assembly2. Relevant Actuator Assembly		Net to netNet to net
Note : The import of components shall be permitted on net to net basis with accountability clause and the type, technical specifications (including part No. if any) etc. of the components sought for import should confirm to those utilise in the manufacturer of the resultant product.
C1801	Dumet wire (Copper tube filled with Alloy Steel and Nickel)	1 kg		1. Nickel Cathodes and / or Nickel Pellets – containing approx. 99.9%(min.) Nickel contents2. High Conductivity Copper Tube containing approx. 99.9% (min.) Copper contents	1.02 kg/kg content in export product1.01 kg/kg content in export product

-:20:-

C1802	Stainless Steel Ballpen Tips	1 Million NoSr.	1. Stainless Steel Wire dia 2.3 mm of relevant grade2. Tungsten Carbide Balls3. Cutting Oil, Cleaning Oil – Trichloroethylene, Cutting Tools	2.30 kg/kg content in the export product1.02 Millions4% of FOB value
C1803	Sulphur Cored Wire	1 kg	1. Sulphur Granules S:99% Min. Size: 0 to 2 mm2. CRCA Steel Strips Grade: EDD Width 58 mm	1.015 kg/kg of Sulphur Granule content in export product1.010 kg/kg of CRCA content in export product
C1804	Cryocontainer/ Cryoseal Container/ Liquid Nitrogen Container/ A.I. Equipment/ Cryogenic Containier / Cryoseal Liquid Nitrogen Container made of Aluminium	1 No.	1. Cold Rold Aluminium Sheet in Coil & Non Coil Form2. Pallodium Oxide Anhydrous3. Molecular Sleve4. Non Woven Cryogenic Insulation Fabric	1.10 kg/kg content in export productNet to netNet to net1.05 kg/kg content in export product

-:21:-

			5. Aluminium Foil6. Adhesive – Crest7. Adhesive – Ciba8. Consumables (Welding Wire, Welding Flux & Welding Rods)9. FRP Neck Tubes	1.02 kg/kg content in export product{{{ 5% of FOB{{{Net to net
C1805	High Speed Steel (Cobalt Grade) End Mills Dia 1 mm to 20 mm	1 kg	1. High Speed Steel (Cobalt Grade) in the form of Coils/ Bars/Rods of Diameter 7 mm to 23 mm	1.50 kg
C1806	Electrolytic Tinplate Waste/ waste printed / lacquered unprinted sheets cut to size for making components of round tin cans other than OTS cans	1 kg	1. Unprinted /Unlaquered Electrolytic Tinplate Waste / Waste Coil/Sheet	1 kg
C1807	Long Life Lamps (0-150 watts) life 16,000 hours to 20,000 hours)	1000 NoSr.	1. 90% Krypton Gas Bal Nitrogen2. Glass Shells/ Glass Envelopes3. Brass Caps4. B701 Halogen Tungsten Wire (upto 30 mg)	116 Litres at 1 Bar or 0.58 Litre at 200 Bar1150 NoSr.1010 NoSr.910 MtrSr.

-:22:-

			5. Lead in wire (Ballotiny filled)6. Getter (P3L5)7. K18 Lamp Copping Cement8. Getter (ALZR)9. Marking Ink	1010 NoSr.0.045 Litres1.55 kg0.030 Litres8.750 Grams
C1808	Dish Ends (Ellipsoidal or Circular Shape) made of Non- Alloy Steel Plates	1 kgSr.	1. Non-Alloy Steel Plates SA 516/515	1.1 kg/kg content of Steel Plate in the export product
C1809	Pressure Die Cast Zinc Aluminium Alloy Builders Hardware Lacquered/ Powder Coated	1 MT	1. Zinc Ingot (High Grade Special 99.995% purity)2. Cylinders with or without key(s)3. Plastic Chips for Plastic component such as washers key holders etc. Polyamite 66/ Nylon66/ Polyamite6 / Nylon6/ Polyacetal/ Delrin/ Polyoxymethylene4. Machine Screws5. Berlaclear CT Laquer/ Albrilac HB (for Electrophoretic Lacquer)OR(a) Polyester Powder forcoating	1.12 kg/kg content of Zinc in export productNet to net1.05 kg/kg content in export productNet to net||||||||

-:23:-

			(b)Solvent forElectrophoreticLacquera. Rinse additive for Electrophoretic Lacquer6. Abrasive Belt 50 mm x 3500 mm for grinding7. Abrasive Belt 150 mm x 2000 mm for grinding8. Liquid polishing compound for polishing Rough Finish9. Trichloro Ethylene for degreasing	|||||| Import item| No. 5 to 11| upto 6% of| FOB value|||||||||
			10.Bar Polishing compound Final Finish (Pre-polishing compound, polishing compound Finishing compound)11.Polishing Buffs (Pre-polishing Buffs, Polishing Buffs, Finishing Buffs	||||||||||

-:24:-

Annexure “D” to the

Public Notice No. 37

Dated: 03/10/2002

MISCELLANEOUS PRODUCTS

Sr. No.	Export Item	Qty.	Import Item	Qty. Allowed
K153	Sheet Metal Toys	1 kg	(b) Metal Sheet (iron Sheet coated with Tin) having a thickness equal to or less than 0.5 mm	1.10 kg/kg content of relevant metal sheet in export product
K154	Wooden Toys	1 kg	1. Wood (Rubber Wood / Pine Wood) in log form	1.30 kg/kg content of relevant wood in export product