The Government of India issued Public Notice No. 46 (RE-02)/2002-2007 on November 6, 2002, to amend the Standard Input Output Norms (SION) as outlined in the Handbook of Procedures for the 2002-2007 period. These amendments are made under Paragraph 2.4 of the Export and Import Policy 2002-2007. Key updates include the addition of new entries for food products, plastic products, and sports goods. For food products, entries E-108 to E-109 have been introduced. In plastic products, entries H-508 to H-512 are added, while in sports goods, entries I-39 to I-41 are included. Detailed specifications for the input-output requirements of various materials such as adhesives, fabrics, and components for these goods are listed. The changes aim to streamline export and import processes, aligning them with updated standards and promoting consistency in trade practices. This public notice serves to ensure that the amendments are incorporated into the existing norms, impacting industries involved in the production and trade of these goods.
GOVERNMENT OF INDIA
MINISTRY OF COMMERCE & INDUSTRY
DEPARTMENT OF COMMERCE
PUBLIC NOTICE NO. 46 (RE- 02)/ 2002-2007
NEW DELHI : DATED : 06/11/2002.
Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.
2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of Foreign Trade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.
3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure “A” to this Public Notice shall be made.
4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-
CHEMICALS AND ALLIED PRODUCTS
After the existing entry at Sr.No.A-3064, new entries at Sr. No. A-3065 to A-3109 shall be added as per Annexure ”B” to this Public Notice.
ENGINEERING PRODUCTS
After the existing entry at Sr.No.C-1823, new entries at Sr.No.C-1824 to C-1825 shall be added as per Annexure ”C” to this Public Notice.
-:2:-
FOOD PRODUCTS
After the existing entry at Sr.No.E-107, new entries at Sr. No. E-108 to E-109 shall be added as per Annexure ”D” to this Public Notice.
PLASTIC PRODUCTS
After the existing entry at Sr.No.H-507, new entries at Sr. No. H-508 to H-512 shall be added as per Annexure ”E” to this Public Notice.
SPORTS GOODS
After the existing entry at Sr.No.I-38, new entries at Sr. No. I-39 to I-41 shall be added as per Annexure ”F” to this Public Notice.
5. This issues in public interest.
( L. MANSINGH )
DIRECTOR GENERAL OF FOREIGN TRADE
(R. C. SAINI)
DIRECTOR GENERAL OF FOREIGN TRADE
FOR DIRECTOR GENERAL OF FOREIGN TRADE
-:3:-
Annexure “A” to the
Public Notice No. 46
Dated: 06/11/2002
AMENDMENTS/CORRECTIONS
| Sr.
No. |
Page
No. |
Reference | Amendments/Corrections |
| 1 | 2 | 3 | 4 |
| 1. | 17 -18 | Chemicals & Allied Products
Sr.No.A60 |
The description of the export item shall be amended to read as under:-
“Ampicillin Anhydrous BP/USP” |
| 2. | 52 | Chemicals & Allied Products
Sr.No.A272 |
After the import item at Sr. No. 3 the following import item (with quantity) shall be added:-
“4. Methanol – 1.00 kg” |
| 3. | Chemicals & Allied Products
Sr.No.A963 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A963 | Tartrazine (C.I. No. 19140) (Dye content: 87%) | 1 kg | 1. 1- (4 Sulphophenyl) 3- Carboxy 5-Pyrazolone
OR 1-Phenyl 3 Carbethoxy Pyrazolone-5 2. Aniline 3. Sodium Nitrite 4. Caustic Soda 5. Soda Ash 6. Methanol |
0.567 kg
0.567 kg 0.261 kg 0.150 kg 0.170 kg 0.336 kg 1.894 kg |
-:4:-
| 4. | 168 | Chemicals & Allied Products
Sr.No.A1369 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1369 | Isobornyl Acetate | 1 kg | 1. Gum Terpentine Oil containing Alpha Pinene 82.5%
OR Alpha Pinene 2. Acetic Acid (Glacial) |
1.065 kg
0.878 kg 0.302 kg |
| 5. | 227 | Chemicals & Allied Products
Sr.No.A1775, A1776 & A1777 |
The norms covered by these entries shall be deleted. |
| 6. | 337 | Chemicals & Allied Products
Sr.No.A2657 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2657 | Alpha Pinene Epoxide | 1 kg | 1. Alpha Pinene
OR Gum Turpentine Oil containing Alpha Pinene 82.5% |
1.103 kg
1.336 kg |
| 7. | 334 | Chemicals & Allied Products
Sr.No.A2624 |
The norm covered by this entry shall be deleted. |
-:5:-
| 8. | 368 | Chemicals & Allied Products
Sr.No.A2915 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2915 | Potassium Metabisulphite | 1 kg | 1. Potassium Carbonate | 0.960 kg |
| 9. | 18 | Chemicals & Allied Products
Sr.No.A2997 (as amended vide Public Notice No. 20 Dated:01.07.2002) |
The description of import item at Sr. No. 4 (without any change in quantity) shall be amended to read as under:-
“Diamino Stilbene Disulphonic Acid (4, 4 Diamino Stilbene 2, 2 Disulfonic Acid)” |
| 10. | 18 | Chemicals & Allied Products
Sr.No.A2998 (as amended vide Public Notice No. 20 Dated:01.07.2002) |
The quantities of import items at Sr. No. 2 & 3 shall be amended to read as under:-
“2. 0.165 kg 3. 0.160 kg” |
| 11. | 35 | Chemicals & Allied Products
Sr.No.A3051 (Notified vide Public Notice No. 44 Dated:18.10.2002 |
The norm covered by this entry shall be deleted. |
| 12. | 425 | Electronic Product
Sr.No.B-99 |
The description of export Item shall be amended to read as under:-
“Medical Audiometers, Constant Temperature Baths/Plates, Transducers and Pathological Instruments such as Blood Gas Analyser, Electrolytic Analyser etc.” |
-:6:-
| 13. | 430 | Electronic Product
Sr.No.B-108 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| B-108 | Multiform Bead Glass | 1 kg | 1. Spray Dried Glass Powder
OR Glass Frit OR Milled Glass Powder 2. Polyethylene Glycol 3. Colouring Pigment 4. Lanco Wax 5. Butyl Hydroxy Anisole |
1.05 kg
1.1 kg 1.05 kg 0.06 kg 0.0125 kg 0.003 kg 0.003 kg |
| Note : Import of item at Sr. No. 2 to 5 will not be allowed if Spray Dried Glass Powder is opted under item No. 1 | ||||
| 14. | 509-510 | Engineering Product
Sr.No.C189 |
1. After the import item at Sr. No. 1(h) the following (without any quantity) shall be added:-
“1(I). Capacitor (Condenser) – Net to Net” 2. The import items at Sr. Nos. 6 & 7 (with quantity) shall be deleted. |
| 15. | 515 | Engineering Product
Sr.No.C206 |
The description of export product shall be amended to read as under:-
“Enamelled Copper wire (not elsewhere specified)” |
| 16. | 525 | Engineering Product
Sr.No.C248 |
After the existing foot notes below this norms, the following additional note shall be added:-
“Wherever PVC stabilizer is asked for it may be allowed upto 3% of the quantity of PVC compound, subject to reduction of the same %age in the quantity of PVC resin” |
-:7:-
| 17. | 530 | Engineering Product
Sr.No.C270 |
After the existing foot notes below this norms, the following additional note shall be added:-
“Wherever PVC stabilizer is asked for it may be allowed upto 3% of the quantity of PVC compound, subject to reduction of the same %age in the quantity of PVC resin” |
| 18. | 5 | Engineering Product
Sr.No.C274 (amended vide Public Notice No.20 Dated:01/07/2002) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C274 | Radiators for Transformers (made out of CRCA Non Alloy Steel Sheet) | 1 kg | 1. CRCA Sheets / Coils | 1.05 kg/kg |
| Note : In case of Coated/Painted radiators, relevant coating / painting materials may be allowed on actual requirement basis upto 10% of the FOB value of export | ||||
| 19. | 541 | Engineering Product
Sr.No.C301 |
1. The description of export item shall be amended to read as under:-
“Steel Welding Electrodes made of Mild Steel / Stainless Steel” 2. The description of import item at Sr. No. 1 (without any change in quantity) shall be amended to read as under:- “Relevant Mild Steel Wire Rod/ Stainless Steel Wire Rod” |
-:8:-
| 20. | 586 | Engineering Product
Sr.No.C474 |
The description of export item shall be amended to read as under:-
“Mild Steel Cold Rolled wide Coil (Black Plate in Coil)” |
| 21. | 693-694 | Engineering Product
Sr.No.C985 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C985 | Automotive Radiator made of Copper and Brass with/without tank | 1 kg (without tank) | 1. Copper Foils
2. Brass Foils/Tubes OR (a) Copper Cathode/ Wire Bar Ingot/ Rod (b) Zinc Ingot |
0.22 kg
0.22 kg 0.162 kg 0.07 kg |
| 3. Brass Sheet
OR (a) Copper Cathode/ Wire Bar / Ingot / Rod (b) Zinc Ingot 4. a) Tin Ingot b) Lead Ingot 5. Terne Plate or CRCA Sheet/Coil/Strips 6. Nylon 66 OR Tank of relevant Size & specification |
0.31 kg
0.228 kg 0.098 kg 0.07 kg 0.03 kg 0.10 kg 1.024 kg/kg content in the Tank Net to net |
-:9:-
| 22. | 706-707 | Engineering Product
Sr.No.C1058 |
After the import item at Sr. No. 10 the following additional inputs (with quantity) shall be added:-
“11. ABS Resin – 1.035 kg/kg content in the export product 12. Epoxy Resin – 1.05 kg/kg content in the export product 13. Hardner – 1.05 kg/kg content in the export product |
| 14. Pigment Red/Black – 1.05 kg/kg
content in the export product 15. Ink for Silk Screen – 1.01 kg/kg content in the export product 16. Additives – 1.05 kg/kg content in the export product 17. Terminals – Net to Net 18. Safety vent valves – Net to Net |
| 23. | 780 | Engineering Product
Sr.No.C1382 |
After the existing foot note below this norms, the following additional note shall be added:-
“Wherever PVC stabilizer is asked for it may be allowed upto 3% of the quantity of PVC compound, subject to reduction of the same %age in the quantity of PVC resin” |
-:10:-
| 24. | 782 | Engineering Product
Sr.No.C1392 |
After the existing foot note below this norms, the following additional note shall be added:-
“Wherever PVC stabilizer is asked for it may be allowed upto 3% of the quantity of PVC compound, subject to reduction of the same %age in the quantity of PVC resin” |
| 25. | 20 | Engineering Product
Sr.No.C1794 (amended vide Public Notice No. 27 Dated:01/08/2002) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C1794 | Enamelled copper wire with self bonding enamel of less than 0.1 mm diameter (not elsewhere specified) | 1 kg | 1. Copper Rod/Copper wire dia 0.1 mm and above
2. Self bonding enamel having solid content of 10% |
1.12 kg/kg content in the export product
CIF value restricted upto 8% of the FOB value |
| 26. | 478 | GENERAL NOTES FOR ENGINEERING PRODUCTS | After the general note for Engineering products at Sr. No. 3 the following general note shall be added:-
“Note : 4. For Import of components, in respect of Export product (a) where norms have not been standardized and published and the applicant seeks to import only Components (without any raw material, consumables etc.) or (b) where SION do not provide import of Components |
-:11:-
| or (c) where additional Components in addition to those allowed in norms are sought, the Components as an input may be allowed for import on net-to-net basis, without any wastage, by the Licensing Authority. Import
of components sought as Spares shall be governed by the Policy for Spares. In such cases, the import of Components allowed shall be permitted with accountability clause and the type, technical specifications (including part No. if any), etc. of the Components sought for import should conform to those utilized in the manufacturing of the resultant product, which should be reflected in export documents (Shipping Bills) also. A condition to this effect shall be imposed on the licence.” |
| 27. | 910 | Food Product
Sr.No.E32 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| E32 | Nutmeg Oil | 1 kg | 1. Nutmeg whole with shell (BWP) (broken Wormy Panky) | 15 kg |
| Nutmeg Oleoresin | 1 kg | 1. Nutmeg whole with shell | 7 kg |
-:12:-
| 28. | 910 | Food Product
Sr.No.E42 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| E42 | Soyabean Extraction | 1 MT | 1. Hexane
2. Coal 3. Diesel (for power generation) |
9.20 Ltrs
110 kg 11 Ltrs. |
| Note 1. Item No. 3, i.e. Diesel shall be allowed only under A.U. condition.
Note 2. The norms for Diesel are applicable only to those units which have facility for captive power generation using diesel as fuel. Note 3. Item No. 2, i.e. Coal is allowed as a process material essentially for heating purpose in the manufacture of Soyabean extraction and not for power generation for running the plant. |
||||
| 29. | 1007 | Plastic Product
Sr.No.H-264 |
The description of import item at Sr. No. 5 (without any change in quantity) shall be amended to read as under:-
“Processing Aid/Stabilizers” |
| 30. | 1007 – 1008 | Plastic Product
Sr.No.H-268 |
The description of import item at Sr. No. 5 (without any change in quantity) shall be amended to read as under:-
“Processing Aid/Stabilizers” |
| 31. | 1021 – 1022 | Plastic Product
Sr.No.H-331 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| H-331 | Tooth Brushes | 1 kg | 1. a) Relevant Polymer namely SAN/ Cellulose Acetate/ ABS/PS/TPE/ TPR | 1.05 kg/kg content in export product |
-:13:-
| b) Relevant Dyes
OR 1. Relevant Tooth Brush Handles 2. Relevant Nylon 6/66/612 Monofilament Relevant Aluminium / Nickel / Nickel Silver Wire |
1% of Plastic content at (a) above.
Net + 2% wastage 1.05 kg/kg content in export product 1.01 kg/kg content in export product |
| 32. | 1086 | Textile Product
Sr.No.J-96 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| J-96 | Cotton Dyed Denim Cloth with/without Elaston/Lycra/ Spandex Yarn | 1 kg | 1. Raw Cotton
OR Cotton Yarn |
1.24 kg/kg content in the export product
1.04 kg/kg content in the export product |
| 2. Vat Indigo Blue Dye
OR Vat (other than Indigo)/ Reactive / Sulphur/ Pigment Dyes 3. Polyvinyl Alcohol 4. Sodium Hydrosulphite 5. Caustic Soda Flakes 6. Elaston/Lycra/ Spandex Yarn |
0.05 kg
0.015 kgs 0.03 kg 0.02 kg 0.02 kg 1.05 kg/kg of material content in the export product |
-:14:-
| OR
Stretch Yarn (mixed Yarn containing 95% Cotton and 5% of Elaston / Lycra/Spandex Yarn) 7. Poly Acrylic Synthetic Sizing agent / Poly Acryl Amide Solution 8. Sulfoesterifiedamide Starch / modified starch 9. (a) Fuel for power generation for mills having spinning, weaving and processing activities (raw cotton as raw material) Naphtha OR SKO OR Furnace Oil OR HSD 9. (b) Fuel for power generation for mills having weaving and processing activities (cotton yarn as raw material) Naphtha OR SKO |
1.05 kg/kg of materials content in the export product
0.016 kg 0.044 kg 1.22 kg 1.22 kg 0.92 litre 1.10 litre 0.73 kgs. 0.73 kgs. |
-:15:-
| OR
Furnace Oil OR HSD |
0.65 litre
0.77 litre |
|||
| Note : (i) Naphtha, SKO, Furnace Oil and HSD shall be allowed only under AU condition. (ii) the above norms for fuel are applicable to units having spinning, weaving and processing activities or weaving and processing activities. Also the said units should have facilities for captive power generation using Naphtha / SKO/Furnace Oil/HSD (iii) Vat Indigo Blue Dye shall be allowed for import only when the export item is indigo blue dyed denim cloth. | ||||
-:16:-
Annexure “B” to the
Public Notice No. 46
Dated: 06/11/2002
CHEMICALS AND ALLIED PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3065 | Alpha Campholenic Aldehyde | 1 kg | 1. Alpha Pinene
OR Gum Turpentine Oil containing Alpha Pinene 82.5% |
1.654 kg
2.00 kg |
| A3066 | Di-hydro Myrcene | 1 kg | 1. Alpha Pinene
OR Gum Turpentine Oil containing Alpha Pinene 82.5% |
1.691 kg
2.073 kg |
| A3067 | MDEA-P (Blended mixture of methyl Diethanolamine and Piperazine containing Piperazine 20 + 1% | 1 kg | 1. Piperazine | 0.210 kg |
| A3068 | Catalyst 59-5/59-5M containing ZnO 36%, and Na2O – 17%, Al2O3 – 30% | 1 kg | 1. Zinc Carbonate
2. Sodium by carbonate 3. Alumina Trihyderate 4. Atta Gel |
0.616 kg
0.511 kg 0.480 kg 0.154 kg |
| A3069 | Ferric Chloride | 1 MT | 1. Furnace Oil | 0.035 MT |
-:17:-
| A3070 | Fluorescent Pigment Green HTPB (Polyamide Matrix content 95%) | 1 kg | 1. Isophorone Diamine
2. Isophthalic Acid 3. Optical Brightner 4. Solvent Dyes |
0.363 kg
0.430 kg 0.001 kg 0.030 kg |
|
| A3071 | Fluorescent Pigment Magenta HTPB (Polyamide Matrix content 95%) | 1 kg | 1. Isophorone Diamine
2. Isophthalic Acid 3. Optical Brightner 4. Basic Dyes |
0.363 kg
0.430 kg 0.001 kg 0.035 kg |
|
| A3072 | Fluorescent Pigment Chrome HTPB (Polyamide Matrix content 95%) | 1 kg | 1. Isophorone Diamine
2. Isophthalic Acid 3. Optical Brightner 4. Basic Dyes 5. Solvent Dyes |
0.363 kg
0.430 kg 0.001 kg 0.006 kg 0.028 kg |
|
| A3073 | Fluorescent Pigment Orange HTPB (Polyamide Matrix content 95%) | 1 kg | 1. Isophorone Diamine
2. Isophthalic Acid 3. Optical Brightner 4. Basic Dyes 5. Solvent Dyes |
0.363 kg
0.430 kg 0.001 kg 0.014 kg 0.037 kg |
|
| A3074 | Fluorescent Pigment Pink HTPB (Polyamide Matrix content 95%) | 1 kg | 1. Isophorone Diamine
2. Isophthalic Acid 3. Optical Brightner 4. Basic Dyes |
0.363 kg
0.430 kg 0.001 kg 0.026 kg |
|
| A3075 | Fluorescent Pigment Red HTPB (Polyamide Matrix content 95%) | 1 kg | 1. Isophorone Diamine
2. Isophthalic Acid 3. Optical Brightner 4. Basic Dyes 5. Solvent Dyes |
0.363 kg
0.430 kg 0.001 kg 0.026 kg 0.009 kg |
|
| A3076 | Fluorescent Pigment Red Orange HTPB (Polyamide Matrix content 95%) | 1 kg | 1. Isophorone Diamine
2. Isophthalic Acid 3. Optical Brightner 4. Basic Dyes 5. Solvent Dyes |
0.363 kg
0.430 kg 0.001 kg 0.017 kg 0.025 kg |
|
-:18:-
| A3077 | Fluorescent Pigment Blue HTPB (Polyamide Matrix content 95%) | 1 kg | 1. Isophorone Diamine
2. Isophthalic Acid 3. Optical Brightner 4. Basic Dyes |
0.363 kg
0.430 kg 0.001 kg 0.032 kg |
| A3078 | Fluorescent Pigment Violet HTPB (Polyamide Matrix content 95%) | 1 kg | 1. Isophorone Diamine
2. Isophthalic Acid 3. Optical Brightner 4. Basic Dyes |
0.363 kg
0.430 kg 0.001 kg 0.011 kg |
| A3079 | Fluorescent Pigment Yellow HTPB (Polyamide Matrix content 95%) | 1 kg | 1. Isophorone Diamine
2. Isophthalic Acid 3. Optical Brightner 4. Solvent Dyes |
0.363 kg
0.430 kg 0.001 kg 0.039 kg |
| A3080 | Fluorescent Pigment Chrome HTPA (Polyester Matrix content 95%) | 1 kg | 1. Melamine
2. Optical Brightner 3. Basic Dyes 4. Solvent Dyes |
0.102 kg
0.001 kg 0.010 kg 0.028 kg |
| A3081 | Fluorescent Pigment Green HTPA (Polyester Matrix content 95%) | 1 kg | 1. Melamine
2. Optical Brightner 3. Solvent Dyes |
0.102 kg
0.001 kg 0.027 kg |
| A3082 | Fluorescent Pigment Orange HTPA (Polyester Matrix content 95%) | 1 kg | 1. Melamine
2. Optical Brightner 3. Basic Dyes 4. Solvent Dyes |
0.102 kg
0.001 kg 0.019 kg 0.030 kg |
| A3083 | Fluorescent Pigment Pink HTPA (Polyester Matrix content 95%) | 1 kg | 1. Melamine
2. Optical Brightner 3. Basic Dyes |
0.102 kg
0.001 kg 0.052 kg |
-:19:-
| A3084 | Fluorescent Flushed Ink concentrate – Lemon Yellow (Amino Sulphonamide content 47%) | 1 kg | 1. Ortho-Para Toluene Sulphonamide/ Para Toluene Sulphonamide (OTPT/ PTS Amide)
2. Melamine 3. Para Formaldehyde 4. Optical Brightner 5. Solvent Dyes |
0.322 kg
0.090 kg 0.140 kg 0.001 kg 0.028 kg |
| A3085 | Fluorescent Flushed Ink concentrate – Magenta (Amino Sulphonamide content 47%) | 1 kg | 1. Ortho-Para Toluene Sulphonamide/ Para Toluene Sulphonamide (OTPT/ PTS Amide)
2. Melamine 3. Para Formaldehyde 4. Optical Brightner 5. Basic Dyes 6. Solvent Dyes |
0.322 kg
0.079 kg 0.127 kg 0.001 kg 0.031 kg 0.001 kg |
| A3086 | Fluorescent Flushed Ink concentrate – Fire Orange (Amino Sulphonamide content 47%) | 1 kg | 1. Ortho-Para Toluene Sulphonamide/ Para Toluene Sulphonamide (OTPT/ PTS Amide)
2. Melamine 3. Para Formaldehyde 4. Optical Brightner 5. Basic Dyes 6. Solvent Dyes |
0.322 kg
0.079 kg 0.122 kg 0.001 kg 0.012 kg 0.043 kg |
-:20:-
| A3087 | Fluorescent Flushed Ink concentrate – Pink (Amino Sulphonamide content 47%) | 1 kg | 1. Ortho-Para Toluene Sulphonamide/ Para Toluene Sulphonamide (OTPT/ PTS Amide)
2. Melamine 3. Para Formaldehyde 4. Optical Brightner 5. Basic Dyes 6. Solvent Dyes |
0.322 kg
0.079 kg 0.122 kg 0.001 kg 0.023 kg 0.001 kg |
| A3088 | Reactive Blue 221 (Reactive Blue BRX) | 1 kg | 1. Cyanuric Chloride
2. N-Ethyl Meta Base Ester |
0.187 kg
0.310 kg |
| A3089 | Disperse Yellow SBL RG2 (Disperse Yellow 86) | 1 kg | 1. Para Phenetidine
2. Ortho Nitro Chloro Benzene (ONCB) |
0.480 kg
0.650 kg |
| A3090 | Raney Nickel Catalyst (Activated suspended in water) Nickel content : 92-96% Aluminium content 4-6% | 1 kg (on dry basis) | 1. Nickel Metal
2. Aluminium Metal 3. Caustic Soda |
1.00 kg
1.0 kg 2.50 kg |
| A3091 | Aminosol P 40 (Blended mixture of Methyl Diethanolamine and Piperazine containing Piperazine 40 + 1% | 1 kg | 1. Piperazine | 0.420 kgs |
-:21:-
| A3092 | Lisinopril | 1 kg | 1. L-Proline
2. Trifluoro Acetic Acid 3. Methylene Chloride 4. Acetone 5. Methanol 6. Toluene 7. Tetra Hydofuran 8. Isopropyl Alcohol 9. Activated Carbon 10.Benzyl Chloroformate 11.5% Palladium on Charcoal 12.Pivaloyl Chloride 13.Potassium Carbonate 14.Raney Nickel Catalyst 15.Triethylamine 16.Di Iso Propyl Ether 17.L-Lysine Hcl 18.Magnesium Metal 19.Cyclohexane |
0.927 kg
1.26 kg 10.77 kg 0.482 kg 5.60 kg 6.17 kg 0.616 kg 4.27 kg 0.100 kg 1.30 kg 0.011 kg 0.584 kg 0.789 kg 0.100 kg 0.536 kg 1.92 kg 1.545 kg 0.214 kg 0.177 kg |
| A3093 | Phenocyanol | 1 kg | 1. Meta Phenoxy Benzaldehyde
2. Sodium Cyanide 3. Iso Propyl Ether |
0.861 kg
0.288 kg 0.137 kg |
| A3094 | Diacetyl Acyclovir | 1 kg | 1. Guanine
OR a) Ethyl Cyano Acetate b) Guanidine Nitrate c) Sodium Metal OR Sodium Methoxide d) Formic Acid e) Sodium Nitrite f) Formamide 2. 1,3 Dioxalane 3. Benzyl Toluene 4. Dimethyl Acetamide |
0.60 kg
0.80 kg 0.90 kg 0.35 kg 0.82 kg 1.62 kg 0.40 kg 0.25 kg 0.50 kg 0.50 kg 1.10 kg |
-:22:-
| A3095 | Sterile Ceftazidime | 1 kg | 1. T.A. E. M.
2. Acetone 3. Hexamethyl Disilane 4. Iodine 5. Isopropyl Alcohol 6. Methylene Chloride 7. Methanol 8. Pyridine 9. Activated Carbon 10.Sterile Sodium Carbonate 11.Triethyl Amine 12.Formic Acid (98%) 13.Formic Acid (85%) 14.Caustic Soda 15.7 ACA |
1.573 kg
4.32 kg 1.707 kg 2.50 kg 3.52 kg 2.23 kg 2.216 kg 1.89 kg 0.071 kg 0.093 kg 0.069 kg 3.70 kg 0.211 kg 4.302 kg 1.08 kg |
| A3096 | Phenazone BP/EP | 1 kg | 1. 1-Phenyl-3-Methyl-5-Pyrazolone
2. Isopropyl Alcohol |
1.32 kg
0.50 kg |
| A3097 | Flutamide | 1 kg | 1. 3-Amino Benzo Tri Fluride
2. Iso Butyryl Chloride 3. N-Heptane/ Heptane 4. Toluene |
1.457 kg
1.08 kg 1.00 kg 0.48 kg |
| A3098 | Meta Nitro Para Toluidine | 1 kg | 1. Para Toluidine
2. Acetic Acid 3. Acetic Anhydride |
1.032 kg
0.624 kg 0.147 kg |
| A3099 | Phenyl Proanolamine Hcl | 1 kg | 1. Propiophenone
2. Methanol 3. Acetone 4. Isopropyl Alcohol 5. Toluene |
1.91 kg
0.50 kg 0.56 kg 1.25 kg 1.08 kg |
-:23:-
| A3100 | N-Cyano Ethyl Aniline | 1 kg | 1. Aniline Oil
2. Acrylonitrile |
0.680 kg
0.440 kg |
| A3101 | Lake Erythrosine (Dye content as Erythrosine = 52%) (C.I. No. 45430:1) | 1 kg | 1. Resorcinol
2. Phthalic Anhydride 3. Iodine 4. Acetic Acid Glacial 5. Caustic Soda 6. Aluminium Hydroxide 7. Aluminium Chloride |
0.345 kg
0.232 kg 0.721 kg 0.733 kg 0.257 kg 0.603 kg 0.131 kg |
| A3102 | Anticorrosion VCI Wrapping Paper of GSM 200-225 having a Coating Weight of VCI 0.035 kg/Sq.Metre. | 1 Sq. Meter | 1. HDPE Laminated Paper of relevant GSM
2. VCI Concentrate |
1.02 Sq. Metre
Net content + 2% wastage |
| A3103 | Nickel Catalyst (Ni content 22.5 + 1%) Hydrogenated Vegetable Oil content (60 + 2%) | 1 kg | 1. Nickel Metal/ Nickel sulfate/spent Nickel catalyst (100%) Nickel basis)
2. RBD Vegetable Oil OR Hydrogenated Vegetable Oil 3. Soda Ash |
0.236 kg
0.638 kg 0.638 kg 0.800 kg |
| A3104 | Permanent Marker Ink/ White Board Marker Ink In consumer pack up to 60 ml | 1 kg | 1. Permanent Marker Ink/ White Board Marker Ink In Bulk of relevant technical specification | 1.01 kg |
-:24:-
| A3105 | Chlorinated Paraffin Wax (40-45% Chlorine content) | 1 kg | 1. Paraffin (C10-C30)
2. Chlorine 3. Relevant Stabilizer |
0.660 kgs
0.880 kg 0.010 kgs |
| A3106 | Chlorinated Paraffin Wax (46-50% Chlorine content) | 1 kg | 1. Paraffin (C10-C30)
2. Chlorine 3. Relevant Stabilizer |
0.605 kgs
0.990 kgs 0.010 kgs |
| A3107 | Chlorinated Paraffin Wax (51-55% Chlorine content) | 1 kg | 1. Paraffin (C10-C30)
2. Chlorine 3. Relevant Stabilizer |
0.550 kgs
1.10 kgs 0.010 kgs |
| A3108 | Chlorinated Paraffin Wax (56-60% Chlorine content) | 1 kg | 1. Paraffin (C10-C30)
2. Chlorine 3. Relevant Stabilizer |
0.495 kgs
1.22 kgs 0.010 kgs |
| A3109 | Chlorinated Paraffin Wax (61-65% Chlorine content) | 1 kg | 1. Paraffin (C10-C30)
2. Chlorine 3. Relevant Stabilizer |
0.440 kgs
1.34 kgs 0.010 kgs |
-:25:-
Annexure “C” to the
Public Notice No. 46
Dated: 06/11/2002
ENGINEERING PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C1824 | Lead Cored Wire | 1 kg | 1. Lead Ingots
2. CRCA Steel Strips |
1.02 kg/kg content in export product
1.01 kg/kg content in export product |
| C1825 | Frame Assembly, (Exhaust frame for Steam Turbine Generator) | 1 No. (34.4 MT) | 1. Non Alloy Steel Plates
2. Relevant Steel Forgings/ Components Flanges, Rings, Segmental Rings, Bars 3. Stainless Steel Sheets/ Plates 4. Relevant Castings 5. Relevant Studs/Nuts/ Bolts/Screws/Pins/ Dowels Adapters/ Connectors/Washer Springs 6. Gaskets 7. Wire Inserts |
1.20 kg/kg content in export product
Net to Net 1.05 kg/kg content in export product Net to Net Net to Net Net to Net Net to Net |
-:26:-
| 8. Insulation Material
9. Insulation Paper 10. Welding Electrodes/ Wires (In Straight Lengths/Coils/Spools) 11. Welding Flux |
1.02 Sq.Mtr./ Sq.Mtr. content in the export product
1.02 Sq.Mtr. / Sq.Mtr. content in the export product 2% of net weight of Steel to be welded 0.5% of net weight of Steel to be welded |
-:27:-
Annexure “D” to the
Public Notice No. 46
Dated: 06/11/2002
FOOD PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| E108 | Table Eggs | 1000 Nos. | 1. Di-Calcium Phosphate
2. Pigment/Color viz. Beta – Carotene 10%, 20%, 30% Carophyll Red/ Yellow 3. Antibiotics and Coccidiostats viz. Neomycin, Tylosin, Auromycin, Amprolium, their salts and compounds 4. Premix Vitamin supplements (including Calcium Di-Pantothenate 45%) 5. Packing material (Card Board & Chromo paper) |
1.85 kg
0.74 kg 0.37 kg 0.25 kg Net+5% wastage |
| Note 1.a) Pure medicines should not exceed 20% of the total weight of medicine in case of import item No. 3.
b) In case of import item No. 4, pure vitamins should not exceed 50% of the total premix weight and the vitamin premix should contain a mixture of two or more vitamins. |
||||
-:28:-
| E109 | Fresh Fruits and Vegetables | 1 kg | 1. Corrugated Boxes
2. EPS Moulded Boxes 3. BOPP Self Adhesive Tapes 4. Relevant Wrapping Papers of relevant GSM ( + 10%) 5. HDPE/LDPE/PP Bags 6. Relevant Plastic Box Strapping Rolls |
Net + 1% wastage
Net + 1% wastage 1.05 kg/kg of the weight of BOPP Self Adhesive Tapes 1.05 kg/kg of the weight of relevant wrapping paper of relevant GSM ( + 10%) 1.01 kg/kg of the weight of relevant packing material 1.05 kg/kg of the weight of relevant packing material |
-:29:-
Annexure “E” to the
Public Notice No. 46
Dated: 06/11/2002
PLASTIC PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed | |
| H508 | Self Adhesive Tear tape/ Tear Off Ribbon width 1.00 mm – 9.00 mm minimum length 1000 meters | 1 kg | 1. MOPP/ BOPP Film
2. Acrylic Synthetic Emulsion/ Water Based Adhesive (Solid content 55% + 10%) 3. Release Coat OR 1. Pancakes of Self Adhesive tear Tape/ Tear Off Ribbon (width range 25.1 mm – 1050 mm) 2. Relevant Bobbin |
0.830 kg
0.640 kg 0.016 kg 1.07 kg Net to net |
|
| H509 | Printed / Design Self Adhesive Tear Tape/ Tear Off Ribbon width 1.00 mm – 9.00 mm minimum Length 1000 meters | 1 kg | 1. MOPP/ BOPP film
2. Acrylic Synthetic Emulsion / Water Based Adhesive (Solid content 55% + 10%) 3. Release Coat 4. Printing Ink (Solid content 40% + 10%) 5. Additive 6. Thinner OR |
0.835 kg
0.645 kg 0.017 kg 0.077 kg 0.007 kg 0.039 kg |
|
| 1. Pancakes of Printed / Design Self Adhesive Tear Tape/ Tear Off Ribbon (width Range 25.1 mm – 1050 mm)
2. Relevant Bobbin |
1.09 kg
Net to net |
||||
-:30:-
| H510 | Plain Self Adhesive Tear Tape / Tear Off Ribbon width 9.1 mm – 25.00 mm minimum Length 1000 meters | 1 kg | 1. MOPP/ BOPP Film
2. Acrylic Synthetic Emulsion / Water Based Adhesive (Solid content 55% + 10%) 3. Release Coat |
0.816 kg
0.627 kg 0.016 kg |
| H511 | Pancakes of Self Adhesive Tear Tape/ Tear Off Ribbon width 25.1 mm – 1050 mm | 1 kg | 1. MOPP/ BOPP Film
2. Acrylic Synthetic Emulsion/ Water Based Adhesive (Solid content 55% + 10%) 3. Release Coat |
0.775 kg
0.595 kg 0.015 kg |
| H-512 | PVC Sole for Hawai Chappal (without Filler) | 1 kg | 1. PVC Resin (Suspension Grade)
2. Di-octyl Phthalate Plasticizer (DOP) 3. Di-iso-Decyl Phthalate Plasticizer (DIDP) 4. Lead Stabilizer |
0.752 kg
0.280 kg 0.032 kg 0.011 kg |
-:31:-
Annexure “F” to the
Public Notice No. 46
Dated: 06/11/2002
SPORTS GOODS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| I39 | Football/Soccer Ball Size X S (Extra Small) | 1 No. | 1. Relevant PVC/PU Leather Cloth
2. Relevant Polyester Viscose Fabric/ Polyester Fabric of Relevant GSM 3. Cotton Fabric of Relevant GSM 4. Adhesive PU/Rubber based solvent content 75 + 10% / Natural Latex (DRC 60% + 1%) 5. Relevant Butyl Bladder / Latex Bladder / PU Bladder 6. Thread 7. Ink 8. Thinner 9. Hardener |
0.08 Sq.mtr.
0.08 Sq.mtr. per relevant layer 0.08 Sq.mtr. per relevant layer 10 Gms per relevant layer 1.02 Nos. 8 mtrs. 1 gm 0.25 gm 0.25 gm |
| I40 | Football/Soccer Ball Size 1 | 1 No. | 1. Relevant PVC/PU Leather Cloth
2. Relevant Polyester Viscose Fabric/ Polyester Fabric of Relevant GSM 3. Cotton Fabric of Relevant GSM |
0.13 Sq. mtr.
0.13 Sq.mtr. per relevant layer 0.13 Sq. mtr. per relevant layer |
-:32:-
| 4. Adhesive PU/Rubber based solvent content 75+ 10% / Natural Latex (DRC 60% + 1%)
5. Relevant Butyl Bladder / Latex Bladder / PU Bladder 6. Thread 7. Ink 8. Thinner 9. Hardener |
13 gm per relevant layer
1.02 Nos. 9 mtrs. 2 gm 0.5 gm 0.5 gm |
|||
| I41 | Football/Soccer Ball Size 2 | 1 No. | 1. Relevant PVC/PU Leather Cloth
2. Relevant Polyester Viscose Fabric/ Polyester Fabric of Relevant GSM 3. Cotton Fabric of Relevant GSM 4. Adhesive PU/Rubber based solvent content 75 + 10% / Natural Latex (DRC 60% + 1%) 5. Relevant Butyl Bladder / Latex Bladder / PU Bladder 6. Thread 7. Ink 8. Thinner 9. Hardener |
0.15 Sq. mtr.
0.15 Sq.mtr. per relevant layer 0.15 Sq. mtr. per relevant layer 15 gm per relevant layer 1.02 Nos. 10 mtrs. 2.5 gm 0.5 gm 0.5 gm |
