(TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY

PART-1-SECTION-1)

GOVERNMENT OF INDIA

MINISTRY OF COMMERCE & INDUSTRY

DEPARTMENT OF COMMERCE

PUBLIC NOTICE NO.38 (RE- 03)/ 2002-2007

NEW DELHI : DATED : 09/01/2004.

Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.

2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of ForeignTrade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.

3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure “A” to this Public Notice shall be made.

4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-

CHEMICALS AND ALLIED PRODUCTS

After the existing entry at Sr. No.A-3272, new entries at Sr. No. A-3273 to A-3289 shall be added as per Annexure ”B” to this Public Notice.

-:2:-

ENGINEERING PRODUCTS

After the existing entry at Sr.No.C-1934, new entry at Sr.No.C-1935 shall be added as per Annexure “C” to this Public Notice.

PLASTIC PRODUCTS

After the existing entry at Sr.No.H-536 , new entries at Sr.No.H-537 to H-543 shall be added as per Annexure “D” to this Public Notice.

TEXTILE PRODUCTS

After the existing entry at Sr.No.J-355 , new entries at Sr.No.J-356 to J-357 shall be added as per Annexure “E” to this Public Notice.

5. This issues in public interest.

( L. MANSINGH )

DIRECTOR GENERAL OF FOREIGN TRADE

-:3:-

Annexure “A” to the

Public Notice No. 38

Dated: 09/01/2004

AMENDMENTS/CORRECTIONS

Sr.

No.

Page

No.

Reference Amendments/Corrections
1 2 3 4
1. 50 Chemicals & Allied Products

Sr.No.A254

After the import item at Sr. No. 2, the following import items (with quantity) shall be added:-

“3. Furnace Oil – 0.735 Lit/kg

4. L.D.O. – 0.210 Lit/kg”

2. 153 Engineering Product

Sr.No.A1168

The norm covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
A1168 Silicon Carbide Grains 1 MT 1. Silicon Carbide Crude/ Lumps (containing not less than 95% on dry basis) 1.15 MT
Note : The Purity of export product shall not be lesser than the purity of import item.
3. 230 Chemicals & Allied Products

Sr.No.A1790

After the import item at Sr. No. 9, the following import items (with quantity) shall be added:-

“10.LDO/SKO – 0.435 kg”

-:4:-

4. 236 Chemicals & Allied Products

Sr.No.A1837

After the import item at Sr. No. 8, the following import items (with quantity) shall be added:-

“9.LDO/SKO – 0.216 kg”

5. 284 Chemicals & Allied Products

Sr.No.A2217

The quantity of import item at Sr. No. 1, shall be amended to read as under:-

0.717 kg

6. 5 Engineering Product

Sr.No.A2312 (amended vide Public Notice No.31 Dated:05.11.2003)

The norm covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
A2312 Zirconium Octoate 18% (Zirconium content 18%) 1 kg 1. 2-Ethyl Hexanoic Acid/ Dimethyl Hexanoic Acid Octoic Acid 0.396 kg.
7. 357 Chemicals & Allied Products

Sr.No.A2821

After the import item at Sr. No. 3, the following import items (with quantity) shall be added:-

“4.LDO/SKO – 0.369 kg”

8. 365 Chemicals & Allied Products

Sr.No.A2890

After the import item at Sr. No. 7, the following import item (with quantity) shall be added:-

“8. Furnace Oil – 1.04 Lit/kg”

9. 366 – 367 Chemicals & Allied Products

Sr.No.A2901

The description of export item shall be amended to read as under:-

“Allura Red (Food Red 17) (C.I. No. 16035”

-:5:-

10. 368 Chemicals & Allied Products

Sr.No.A2913

After the import item at Sr. No. 1, the following import item (with quantity) shall added:-

“2. Furnace Oil – 1.29 Lit/kg”

11. 12 Chemicals & Allied Products

Sr.No.A3028 (Amended vide Public Notice No. 37 Dated:03/10/2002)

Quantity of import item at Sr. No.7, shall be amended to read as under:-

1.16 kg

12. 14 Chemicals & Allied Products

Sr.No.A3122 ((Amended vide Public Notice No. 54 Dated:03/01/2003)

The description of import item at Sr. No. 1 &2, (with quantity) shall be amended to read as under:-

“1. Para Chloro Benzotrichloride – 2.25 kg

2. Phenol – 1.00 kg”

13. 35 Chemicals & Allied Products

Sr.No.A3164 (amended Vide Public Notice No.03 Dated:31/03/2003)

The description of export item shall be corrected to read as under:-

“2,6 Dichloro Diphenylamine”

14. 14 Chemicals & Allied Products

Sr.No.A3175 (Notified vide Public Notice No. 10 dated: 30/05/2003)

1. The quantity of import item at Sr. No. 6, shall be amended to read as under:-

“0.031 kg /kg of the export product instead of 0.30 kg”

2. The quantity of import item at Sr. No. 16 shall be amended to read as under:-

“0.033 kg/kg of export product instead of 0.020 kg”

-:6:-

      3. After import items at Sr. No. 16 the following additional inputs (with quantity) shall be added:-

“17. Refined Linseed Oil – 0.088 kg/kg

of export

product

18. Oxy Aluminium – 0.005 kg/kg

Octoate of export

product

15. 23 Chemicals & Allied Products

Sr.No.A3188 (amended Vide Public Notice No.15 Dated:07/07/2003)

1. The description of export item shall be amended to read as under:-

“Bisphenol Amino Ester (Propane 2,2-Diphenyl-4, 4’Bis (2-Amino Phenyl-1-Sulfonyloxy)”

2. The description of import item at Sr. No. 1, (without any change in quantity) shall be amended to read as under:-

“Bisphenol A”

16. 656 Engineering Product

Sr.No.C820

The norm covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
C820 S.S. Fabricated/ Welded Pipes/ Tubes 1 MT 1. Stainless Steel Plates/ Sheet/ Strips/ Wide Coils of relevant grade & specification 1.10 MT.
17. 657-658 Engineering Product

Sr.No.C832

The description of export item shall be amended to read as under:-

“Table, Kitchen & other household article of round shape made of Stainless Steel with or without handle irrespective of what material the handle may have been made of”

-:7:-

18. 658 Engineering Product

Sr.No.C833

The description of export item shall be amended to read as under:-

“Table, Kitchen & other household article made of Stainless Steel with or without handle irrespective of what material the handle may have been made of (other than those covered under C-832)”

19. 8 Engineering Product

Sr.No.C873 (Notified vide Public Notice No. 23 Dated:10/09/2003)

The quantity of export item shall be corrected to read in “Nos.
20. 707 – 710 Engineering Product

Sr.No.C1059

The description of export item shall be amended to read as under:-

“Light Commercial Vehicle (LCV) of GVW upto 7.5 MT”

21. 710-713 Engineering Product

Sr.No.C1062

The description of export item shall be amended to read as under:-

“Medium Commercial Vehicles GVW above 7.5 MT and upto 12 MT in CBU/SKD/CKD condition”

22. 777 Engineering Product

Sr.No.C1375

The norm covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
C1375 Machined cast Bushings of Automotive and Non-Automotive applications, Pumps and valve 1 kg 1. Gun Metal / Red Brass / Leaded Bronze Ingot / Copper Cathode with alloying elements Tin, Lead and Zinc 1.20 kg/kg content in the export product

-:8:-

  Components like casing, impellers, Discs, Plugs Yoke Sleeves, Seals, Spacers and Bearing, Hexagonal Nuts, Earthing Clamps manufactured out of gun metal or Lead Bronze or Red Brass

OR with copper and allowing elements Tin, Lead and Zinc varying from 1 to 10% each, Conforming to BS 1400-LB2, LG2, LG4/DIN 1705-RG5, RG7/ ASTMB 584 or ASTMB 763-C84400, C03200/C93700/SAE660

     
23. 872-873 Engineering Product

Sr.No.C1745

The norm covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
C1745 Hermetically sealed compressors for air conditioner using R 22 refrigerant gas of different capacities 1 No. 1. Components

2. (a) CRNGO Steel Sheet upto 3500 Kcal/hr

(b) More than 3500 Kcal/hr

Net to net basis except upper and lower housing

0.0032 Kg/ Kcal

0.0024 kg/ Kcal

-:9:-

      3. (a) Copper Wire upto 3500 Kcal/hr

(b) Mote than 3500 Kcal/hr

4. (a) Music Wire Upto 3500 Kcal/hr

(b) More than 3500 Kcal/hr

5. (a) Refrigeration Oil Upto 3500 Kcal/ hr

(b) More than 3500 Kcal/hr

6. HR non alloy steel sheet/ coils

7.EC grade

aluminium ingot

0.0005 kg/k/cal

0.0004 kg/Kcal

0.000016 kg/ Kcal

0.000011 kg/ Kcal

0.0003 Ltrs/ Kcal

0.0002 Ltrs/ Kcal

1.28 KG/KG content

1.08 Kg/Kg content

24. 873 Engineering Product

Sr.No.C1746

The norm covered by this entry shall be deleted.
25. 873 – 874 Engineering Product

Sr.No.C1747

The norm covered by this entry shall be deleted.
26. 874 Engineering Product

Sr.No.C1748

The norm covered by this entry shall be deleted.

-:10:-

27. 33 Engineering Product

Sr.No.C1899 (Notified vide Public Notice No. 15 Dated:07/07/2003)

After import item at Sr. No.5, the following import item (with quantity) shall be added:-

“6. Relevant Stainless – 1.08 kg/kg

Steel Sheets content in

the export

product”

28. 21-23 Engineering Product

Sr.No.C1909 (Notified vide Public Notice No. 23 Dated:10/09/2003)

The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:-

“Ammonium Polyacrylate”

29. 24-26 Engineering Product

Sr.No.C1910 (Notified vide Public Notice No. 23 Dated:10/09/2003)

The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:-

“Ammonium Polyacrylate”

30. 26-28 Engineering Product

Sr.No.C1911 (Notified vide Public Notice No. 23 Dated:10/09/2003)

The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:-

“Ammonium Polyacrylate”

31. 29-31 Engineering Product

Sr.No.C1912 (Notified vide Public Notice No. 23 Dated:10/09/2003)

The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:-

“Ammonium Polyacrylate”

-:11:-

32. 31-33 Engineering Product

Sr.No.C1913 (Notified vide Public Notice No. 23 Dated:10/09/2003)

The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:-

“Ammonium Polyacrylate”

33. 34-35 Engineering Product

Sr.No.C1914 (Notified vide Public Notice No. 23 Dated:10/09/2003)

The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:-

“Ammonium Polyacrylate”

34. 36-37 Engineering Product

Sr.No.C1915 (Notified vide Public Notice No. 23 Dated:10/09/2003)

The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:-

“Ammonium Polyacrylate”

35. 38-39 Engineering Product

Sr.No.C1916 (Notified vide Public Notice No. 23 Dated:10/09/2003)

The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:-

“Ammonium Polyacrylate”

36. 40-41 Engineering Product

Sr.No.C1917 (Notified vide Public Notice No. 23 Dated:10/09/2003)

The description of import item at S. No. 1 (J) (without any change in quantity) shall be amended to read as under:-

“Ammonium Polyacrylate”

37. 42-43 Engineering Product

Sr.No.C1918 (Notified vide Public Notice No. 23 Dated:10/09/2003)

The description of import item at S. No. 1 (J) (without any change in quantity) shall be corrected to read as under:-

“Ammonium Polyacrylate”

-:12:-

38. 19 Engineering Product

Sr.No.C1929 (Notified vide Public Notice No. 31 Dated:05/11/2003)

The quantity of export item shall be amended to read in “Nos. instead ofKgs.
39. 963 Plastic Products

Sr.No.H-15

The Foot Note below this entry shall be deleted.
40. 964 Plastic Products

Sr. No. H-24

The norms covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
H-24 Articles made of HDPE/ PP twine / Rope OR Articles made of blend of HDPE&PP Twine / Ropes 1 kg 1. Relevant HDPE/PP Granules/ Chips 1.08 kg/kg content in the export product
Note : 1. The relevant HDPE & PP Granules may be allowed as 1.08 kg./kg content in the export product both for exclusive Articles made of HDPE/PP Twine /Ropes and for Articles made of blended HDPE & PP Twine / Rope on the actual net content of that relevant polymer i.e. HDPE or PP in the blended export product.

Note : 2. In case of coloured export items, the relevant Colour master Batch shall also be allowed as an additional input @ 0.02 kg/kg weight of relevant polymer and accordingly the quantity of relevant polymer i.e. HDPE/PP shall be reduced to 1.06 kg/kg content in the export product.

-:13:-

41. 9 Plastic Products

Sr. No. H-333 (corrected vide Public Notice No. 61 Dated:03/02/2003)

The norms covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
  Twine/ Rope made of HDPE/ PP

OR

Twine/ Rope made of a blend of HDPE & PP in varying proportions

1 kg 1. Relevant HDPE/PP Granules/ Chips 1.07 kg/ Kg content in the export product
Note: 1. The relevant HDPE &PP Granules may be allowed as 1.07 kg/kg content in the export product both for exclusive HDPE/PP Twine/ Ropes and for Twine/ Rope made of blend of HDPE & PP on the actual net content of the relevant polymer i.e. HDPE of PP in the blended Twine/ Ropes to be exported.

2.In case of export of coloured Twine/Ropes, the relevant colour Master Batch shall also be allowed as an additional input @ 0.02 kg/kg weight of relevant polymer and accordingly the quantity of relevant polymer i.e. HDPE/PP shall be reduced to 1.05 kg/ kg content in the export product.

42. 1025 Plastic Products

Sr. No. H-349

The norms covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
H349 Tape / Yarn (plain Twisted) made of HDPE/PP OR Tape / 1 kg 1. Relevant HDPE/PP Granules/ Chips 1.05 kg/kg content in the export product

-:14:-

  Yarn (Plain / Twisted) made of blend of HDPE & PP in varying proportions      
Note : 1. The relevant HDPE & PP Granules/Chips may be allowed as 1.05 kg./kg content in the export product both for the exclusive HDPE/PP and Tape /Yarn made of blended HDPE & PP on the actual net content of that relevant polymer i.e. HDPE or PP in the blended Tape /Yarn to be exported.

Note : 2. In case of export of coloured Tape / Yarn, the relevant Colour master Batch shall also be allowed as an additional input @ 0.02 kg/kg weight of relevant polymer and accordingly the relevant polymer i.e. HDPE/PP shall be reduced to 1.03 kg/kg content in the export product.

43. 1041 – 1042 Plastic Products

Sr. No. H-444

The norms covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
H444 Aseptic Packaging of Aluminium Foil of thickness less than 0.2 mm backed by Paper & LDPE with/ without Polypropylene / MPM Strips 1 MT 1. Relevant Duplex paper Board / Bleached paper/ Kraft Paper

2. Aluminium Foil

3. LDPE Granules

4. LLDPE/HDPE/MLLDPE Granules

1.10 MT/MT content in the export product

1.10 MT/MT content in the export product

1.10 MT/MT content in the export product

1.12 MT/MT content in the export product

-:15:-

      5. Etheylene Acrylic Acid Copolymer/ Adhesive Copolymer Granules

6. Relevant Polypropylene Strips Modified Poly Metallosene Strips

7. Printing Ink

8. Photo Polymer Plates

1.12 MT/MT content in the export product

Net to net

12 kgs./MT of export product

0.5 No./MT of export product

44. 10 Plastic Products

Sr. No. H-461

(amended vide Public Notice No. 61 Dated:03/02/2003)

The norms covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
H-461 Prepared adhesives based on Plastic (Two component Laminating Adhesives) Adhesive (Polyurethane solution containing 60% Resin content and 40% Solvent) 1 kg 1. Adipic Acid

2. Isophthalic Acid

3. Mono Ethylene Glycol

4. Diethylene Glycol

5. 1,6-Hexane Diol

6. Toluene Di-iso-cyanate

7. Ethyl acetate/ methyl Ethyl Ketone (Relevant)

0.090 kg

0.258 kg

0.050 kg

0.195 kg

0.015 kg

0.035 kg

0.400 kg

-:16:-

45. 5-6 (vol-2 Part-I)

&

(v)–(vi) (Vol-2 Part-II)

GENERAL NOTE FOR FUEL (Amended vide Public Notice No.27 Dated:06.10.2003) After Sr. No. 18 of the General Note for Fuel, the following shall be added:-

“19. Bras Art Wares – 2%

-:17:-

Annexure “B” to the

Public Notice No. 38

Dated: 09/01/2004

CHEMICALS AND ALLIED PRODUCTS

Sr.No. Export Item Qty. Import Item Qty. Allowed
A3273 Ramipril 1 kg 1. L-Serine

OR

L-Serine Methyl

Ester Hcl

2. Cyclopentanone

3. Pyrolidine

4. ECPP-Alanine

5. 5% Palledium on Carbon

6. Di Cyclo Carbodiamide

OR

Propyl Phosphoric

Anhydride N-Butyl

Acetate 50% Sol

7. 1-Hydroxy

Benzotriazole

8. Cyclohexane/Dimethyl

Formamide

9. Methanol/Di Isopropyl

Ether

10.Chloroform

5.74 Kg

8.00 Kg

5.54 Kg

5.00 Kg

1.23 kg

0.200 Kg

1.05 Kg

2.10 Kg

0.72 Kg

8.50 Kg

11.50 kg

15.00 Kg

  A3274 Anisyl Cyanide[(4-Mithoxyphenyl) Acetonitrile]/4-Methoxy Benzyl Cyanide 1 kg 1. p-Anisaldehyde

2. Toluene

3. Sodium Cyanide

1.13 Kg

0.15 Kg

0.41 Kg

 
             

-:18:-

A3275 Indoxacarb 14.5% SC 1 kg 1. Indoxacarb (on the basis of a.i. 71.25%)

2. Soprophor BSU

3. Soprophor 3D33

4. Methyl Soyate

0.210 Kg

0.060 kg

0.090 Kg

0.598 Kg

A3276 Lannate (Methomyl 40% SP) 1 kg 1. Methomyl Tech. (a.i-98%)

2. HI SIL (SiO2)

3. Sucrose Octaacetate

4. Sun Spray Oil

5. Brilliant blue dye

0.4120 Kg

0.0600 Kg

0.0040 Kg

0.0065 Kg

0.0020 Kg

A3277 Hepta Sodium Salt of Diethylene Triamine Pentamethylene Phosphonic Acid (Active Salt Content = 32%) 1 kg 1. Yellow Phosphorous

2. Diethylene Triamine

0.083 Kg

0.053 Kg

A3278 Mono Chloro Benzene 1 kg 1. Benzene 0.715 Kg
A3279 Het Diol (1,4,5,6,7, 7 Hexa Chloro-2-3 Bis (Hydroxy Methyl) Bicyclo-2(2,1,1)-heptane-5) 1 kg 1. Hexa Chloro Cyclo Pentadiene

2. Butene Diol

3. Epichlorohydrin

4. Toluene

0.850 kg

0.270 kg

0.018 kg

0.088 kg

A3280 Oryazalin technical 98% Min. 1 kg 1. Potassium-4-Chloro 3.5 Dinitro benzene Sulphonate

2. Di-N-Propyl Amine

3. Thionyl Chloride

4. Toluene

5. Ethylene Dichloride

6. Dimethyl Formamide

1.340 kg

0.490 kg

0.720 kg

0.680 kg

2.290 kg

0.116 kg

                 

-:19:-

A3281 Magnesium Aluminate Spinel (MAS-78) (containing alumina 77 + 1% and magnesium Oxide 22-23%) 1 kg 1. Magnesium calcined

2. Alumina Calcined

3. Dextrin

4. Cemgrind (mixture of high boiling alkanolamine)

0.259 kg

0.886 kg

0.019 kg

0.105 gm

A3282 Biocide Navdecide AL5014 (containing Gluteraldehyde 50%=9.41%) 1 kg 1. Gluteraldehyde 50% 0.095 kg
A3283 Hydroxylamine Hydrochloride 1 kg 1. Methyl Ethyl Ketoxime

2. Furnace Oil

1.46 kgm

1.10 Lit

A3284 Reactive Blue 221 (Reactive Blue BRX) 1 kg 1. Cyanuric Chloride

2. N-Ethyl Meta Base Ester

0.187 kg

0.310 kg

A3285 U.V. Curable Printing Ink – Black, Flush Route

(Minimum Pigment 16.7 % + /- 1%)

1 kg 1. U.V. Flush Colour – Black (Min.30% +/- 1% pigment and Min. 60% +/- 2% polyester Acrylate /Urethane Acrylate/ Acrylic Acrylate/ Epoxy Acrylate

2. Polyester Acrylate/ Urethane Acrylate/ Acrylic Acrylate/ Expoy Acrylate

3. Reactive Monomer namely, Tri-Propylene, Glycol Diacrylate/ Tri Methylol propane Tri

0.576 kg

0.196 kg

0.073 kg

-:20:-

      Acrylate/ Ethoxylated, Tri Methylol propane Tri Acrylate/ Di-Pentaerythritrol Hexa Acrylate

4. Photo Initiator Combo

5. P.E.Wax

6. Fumed Silica /Additive

0.124 kg

0.011 kg

0.051 kg

A3286 U.V. Curable Printing Ink – various colours, Flush Route

(Minimum Pigment 15 % + /- 1%) other than Black ,

Cyan, Magenta and Yellow

1 kg 1. U.V. Flush Colour – Magenta (Min.30% +/- 1% pigment and Min. 60% +/- 2% polyester Acrylate /Urethane Acryl ate/ Acrylic Acrylate/ Epoxy Acrylate

2. Polyester Acrylate/ Urethane Acrylate/ Acrylic Acrylate/ Expoy Acrylate

3. Reactive Monomer namely, Tri-Propylene Glycol Diacrylate/ Tri Methylol propane Tri Acrylate/ Ethoxylated Tri Methylol propane, Tri Acrylate/Di-Pentaerythritrol Hexa Acrylate

4. Photo Initiator Combo

5. P.E.Wax

6. Fumed Silica/ Additive

0.515 kg

0.247 kg

0.103 kg

0.103 kg

0.011 kg

0.051 kg

-:21:-

A3287 U.V. Curable Printing Ink – Magenta, Flush Route

(Minimum Pigment 17.4% + /- 1%)

1 kg 1. U.V. Flush Colour – Magenta (Min.30% +/- 1% pigment and Min. 60% +/- 2% polyester Acrylate /Urethane Acrylate/ Acrylic Acrylate/ Epoxy Acrylate

2. Polyester Acrylate/ Urethane Acrylate/ Acrylic Acrylate Expoy Acrylate

3. Reactive Monomer namely, Tri-Propylene Glycol Diacrylate/ Tri Methylol propane Tri Acrylate/ Ethoxylated Tri Methylol propane Tri Acrylate/ Di-Pentaerythritrol Hexa Acrylate

4. Photo Initiator Combo

5. P.E.Wax

6. Fumed Silica/ Additive

0.597 kg

0.175 kg

0.114 kg

0.082 kg

0.0106 kg

0.051 kg

-:22:-

A3288 U.V. Curable Printing Ink – Cyan , Flush Route

(Minimum Pigment 14.7% + /- 1%)

1 kg 1. U.V. Flush Colour – Cyan (Min.30% +/- 1% pigment and Min. 60% +/- 2% polyester Acrylate /Urethane Acryl ate/ Acrylic Acrylate/ Epoxy Acrylate)

2. Polyester Acrylate/ Urethane Acrylate/ Acrylic Acrylate/ Expoy Acrylate

3. Reactive Monomer namely, Tri-Propylene, Glycol Diacrylate/ Tri Methylol propane ,Tri Acrylate/ Ethoxylated Tri Methylol propane, Tri Acrylate/ Di-Pentaerythritrol Hexa Acrylate

4. Photo Initiator Combo

5. P.E.Wax

6. Fumed Silica/ Additive

0.505 kg

0.258 kg

0.103 kg

0.103 kg

0.011 kg

0.051 kg

-:23:-

A3289 U.V. Curable Printing Ink – Yellow, Flush Route

(Minimum Pigment 10.2% + /- 1%)

1 kg 1. U.V. Flush Colour – Cyan (Min.30% +/- 1% pigment and Min. 60% +/- 2% polyester Acrylate /Urethane Acrylate/Acrylic Acrylate/ Epoxy Acrylate)

2. Polyester Acrylate/ Urethane Acrylate/ Acrylic Acrylate/ Expoy Acrylate

3. Reactive Monomer namely, Tri-Propylene Glycol Diacrylate/Tri Methylol propane Tri Acrylate/ Ethoxylated Tri Methylol propane Tri Acrylate/ Di-Pentaerythritrol Hexa Acrylate

4. Photo Initiator Combo

5. P.E.Wax

6. Fumed Silica/ Additive

0.351 kg

0.412 kg

0.103 kg

0.103 kg

0.011 kg

0.051 kg

-:24:-

Annexure “C” to the

Public Notice No. 38

Dated: 09/01/2004

ENGINEERING PRODUCTS

Sr.No. Export Item Qty. Import Item Qty. Allowed
C1935 Cast Basalt Liner Pipe 1 kg 1. Basalt Rock 1.1 Kg.

-:25:-

Annexure “D” to the

Public Notice No. 38

Dated: 09/01/2004

PLASTIC PRODUCTS

Sr.No. Export Item Qty. Import Item Qty. Allowed
H-537 Low Density Polyethylene (LDPE) 1 MT 1. Propane

2. Oleamide

3. Force Feed Lubricating Oil

4. LPG

5. Propylene

1421 kg

0.5 kg

1.6 kg

3.5 kg

10.0 kg

H-538 White Opaque BOPP Film 1 kg 1. Polypropylene Resin (Homopolymer)

2. Polypropylene Resin (Copolymer)

3. Polypropylene Based Antiblock Compound

4. Polypropylene Based Antistatic Compound

5. Polypropylene based Slip Agent compound

6. Polypropylene based Titanium compound

0.854 kg

0.133 kg

0.002 kg

0.004 kg

0.011 kg

0.196 kg

H-539 BOPP Film “Matte for Third Generation (MTG)”/ “Matte”/ “For Thermo Lamination” 1 kg 1. Polypropylene Resin Homo Polymer

2. Polypropylene Based Anti Block compound

3. Polypropylene Based Resin Slip Agent Compound

4. Polypropylene Based Antistatic Compound

1.051 kg

0.012 kg

0.0118 kg

0.0235 kg

-:26:-

      5. PP Based Matte Compound (Blend of Polypropylene Copolymer and High Density Polyethylene)

6. LLDPE Resin

0.1017 kg

0.1017 kg

Note : For export of “BOPP Film Matte for Third Generation (MTG)”: item no. 1,2,3,4 & 5 shall be allowed. For export of “BOPP Film Matte”: Item No. 1,2,3 & item No. 5 will be allowed as 0.1252 kg. For export of BOPP Film for Thermo-Lamination”: Item No. 1,2,3,4 & 6 shall be allowed.
H-540 Plastic (CR 39) Ophthalmic Hard Coated/Multicoated (Antireflection)/Coloured / Edged Lenses 1 No. 1. Relevant Plastic (CR-39) Ophthalmic Lenses 1.05 No.
H-541 Plain Linoleum Floor Covering 3.2 mm thickness in Sheet or Tiles Form with coating weight of 366 + 3% kg/100 Sq.mtr. 100 Sq.Mtr. 1. Wood Powder

2. Linseed Oil

3. Gum Rosin

4. Copal Gum

5. Titanium Dioxide

6. Cork Powder

7. Necires

60.94 kgs

124.32 kgs

23.86 kgs

2.38 kgs

2.4 kgs

47.8 kgs

1.18 kgs

H-542 Additive (Poly Isocyanate Solution containing 50% Solid and 50% Solvent) 1 kg 1. Adipic Acid

2. Isophthalic Acid

3. Mono Ethylene Glycol

4. Diethylene Glycol

5. 1,6-Hexane Diol

6. Toluene Di-iso-cyanate

7. Ethyl acetate/ methyl Ethyl Ketone (Relevant)

0.012 kg

0.037 kg

0.032 kg

0.060 kg.

0.002 kg

0.372 kg

0.500 kg.

           

-:27:-

H-543 Additive (Polyester Solution containing 50% Resin content and 50% Ethyl Acetate) 1 kg 1. Adipic Acid

2. Diethylene Glycol

3. Ethyl Acetate

0.385 kg

0.165 kg

0.500 kg.

-:28:-

Annexure “E” to the

Public Notice No. 38

Dated: 09/01/2004

TEXTILE PRODUCTS

Sr.No. Export Item Qty. Import Item Qty. Allowed
J356 Cotton Duster (Fabric) 1 kg 1. Cotton Waste (Motes) excluding the waste extracted at / produced by Carding, Draw frame, Comber, Speed frame and Ring frame stages of conversion of raw cotton from fibre to yarn. 1.90 kg
J357 Cotton Duster (Made-ups) 1 kg 1. Cotton Waste (Motes) excluding the waste extracted at / produced by Carding, Draw frame, Comber, Speed frame and Ring frame stages of conversion of raw cotton from fibre to yarn. 1.94 kg

More Under DGFT

Posted Under

Category : DGFT (3786)
Tags : DGFT Notifications (3707)

Leave a Reply

Your email address will not be published. Required fields are marked *

Featured Posts