Sponsored
    Follow Us:
Sponsored

(TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY

PART-1-SECTION-1)

GOVERNMENT OF INDIA

MINISTRY OF COMMERCE & INDUSTRY

DEPARTMENT OF COMMERCE

PUBLIC NOTICE NO. 30 (RE-2001)/1997-2002

NEW DELHI : DATED : 01/08/2001.

Attention is invited to Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time.

2. In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended.

3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/ corrections at appropriate places as mentioned in Annexure “A” to this Public Notice shall be made.

4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-

CHEMICALS AND ALLIED PRODUCTS

After the existing entry at Sr.No.A-2719, the new entries at Sr.No.A-2720 to A-2739 shall be added as per Annexure ”B” to this Public Notice.

ENGINEERING PRODUCTS

After the existing entry at Sr.No.C-1678, the new entries at Sr.No.C-1679 to C-1685 shall be added as per Annexure ”C” to this Public Notice.

-:2:-

TEXTILE PRODUCTS

After the existing entry at Sr.No.J-345 , the new entries at Sr.No. J-346 to J-347 shall be added as per Annexure ”D” to this Public Notice.

This issues in public interest.

(N.L. LAKHANPAL)

DIRECTOR GENERAL OF FOREIGN TRADE

(B. GANGAR)

DY. DIRECTOR GENERAL OF FOREIGN TRADE

FOR DIRECTOR GENERAL OF FOREIGN TRADE

-:3:-

Annexure “A” to the

Public Notice No. 30

Dated: 01/08/2001

AMENDMENTS/CORRECTIONS

Sr.

No.

Page

No.

Reference Amendments/Corrections
1 2 3 4
1. 3 Chemicals & Allied Products

Sr.No.A272 (Amended vide Public Notice No. 04 Dated: 31.03.2001)

In the description of import item at Sr. No. 1 the words “OR Cyano Pyridine” shall be amended (without any change in quantity) to read as under:-

“OR

4-Cyano Pyridine”.

2. 151 Chemicals & Allied Products

Sr.No.A1111

The norm covered by this entry shall be deleted.
3. 165 Chemicals & Allied Products

Sr.No.A1299

The description of import item at Sr. No. 1 shall be amended (without any change in quantity) to read as under:-

“Isopropanol/Isopropyl Alcohol”

4. 167-168 Chemicals & Allied Products

Sr.No.A1333

The Note under this norm shall be deleted.
5. 173 Chemicals & Allied Products

Sr.No.A1404

The description of import item at Sr. No. 1 shall be amended (without any change in quantity) to read as under:-

“Isopropanol/Isopropyl Alcohol”

-:4:-

6. 176 Chemicals & Allied Products

Sr.No.A1435

1. The description of export item shall be amended to read as under:-

“NONYL PHENOL (Specifications: Colour : 50 APHA Max. Phenol content : 0.05% Maximum Dinonyl content : 0.5% Maximum)”

2. The description of import item at Sr. No. 2 shall be amended (without any change in quantity) to read as under:-

“Propylene Trimer/Nonene”

7. 191 Chemicals & Allied Products

Sr.No.A1566

The description of export item shall be amended to read as under:-

“Kraft paper/Deluxe Kraft paper/Unbleached paper”.

8. 241-242 Chemicals & Allied Products

Sr.No.A1802

After the import item at Sr. No. 12 the following import items (with quantity) shall be added:-

“13. SKO – 0.60 KL

14. HSD/LDO – 0.60 KL”.

9. 242-243 Chemicals & Allied Products

Sr.No.A1803

After the import item at Sr. No. 12 the following import items (with quantity) shall be added:-

“13. SKO – 0.60 KL

14. HSD/LDO – 0.60 KL”.

10. 297 Chemicals & Allied Products

Sr.No.A2217

Quantity of import item at Sr. No. 1 shall be amended (without any other change) to read as under:-

“0.717 kg”.

-:5:-

11. 299 Chemicals & Allied Products

Sr.No.A2237

The description of import item at Sr. No. 7 shall be amended (without any change in quantity) to read as under:-

“Sulphamic Acid”.

12. 303 Chemicals & Allied Products

Sr.No.2267

The following import item (with quantity) shall be added after the existing import items:-

“3. Cyclohexanone – 0.787 kg”.

13. 303 Chemicals & Allied Products

Sr.No.A2274

The description of import item at Sr. No. 2 (with quantity) shall be deleted.
14. 304 Chemicals & Allied Products

Sr.No.A2280

The norm covered by this entry shall be deleted.
15. 306 Chemicals & Allied Products

Sr.No.A2299

After the existing import items the following import items (with quantities) shall be added:-

“12. Histadine Free Base – 0.126 kgs

Cell culture tested

13. L-Alanine cell culture – 0.060 kgs

tested

14. Tricine Cell culture – 0.180 kgs

tested

15. TC Lactatalbumine – 0.210 kgs

Hydrolysate

16. L. Arginine Mono- – 0.960 kgs

hydrochloride

17. L. Glutamine – 0.067 kgs

18. Trypsin (From porcine – 0.012 kgs”

pancreas gamma

irradiated)

-:6:-

16. 22 Chemicals & Allied Products

Sr.No.A2535 (Amended vide Public Notice No. 53 Dated: 01/02/2001)

The description of export item shall be corrected to read as under:-

“Galaxy MW 253 Lauryl Alcohol 3 Mole Ethoxylate”.

17. 22 Chemicals & Allied Products

Sr.No.A2536 (Amended vide Public Notice No. 53 Dated: 01/02/2001)

The description of export item shall be corrected to read as under:-

“Galaxy MW 257 Lauryl Alcohol 7 Mole Ethoxylate”.

18. 46 Chemicals & Allied Products

Sr.No.A2640 (Amended vide Public Notice No. 04 Dated: 31/03/2001)

1. The description of export item shall be corrected to read as under:-

“Coated Duplex Board Grey Back/Coated Board Grey Back containing 0.0135 SBR”.

2. After the existing import items the following additional import item (with quantity) shall be added:-

“9. Polymin SK – 0.0009 kg/kg”.

19. 15 Chemicals & Allied Products

Sr.No.A2674 (Amended vide Public Notice No. 15 Dated: 01/06/2001)

1. The description of import item at Sr. No.1 (without any change in quantity) shall be corrected to read as under:-

“Ethyl N-(4-Chloro 5- Cyclopentyloxy-2- Fluoro Phenyl) Carbamate (KPI)”.

2. The quantity of import item at Sr. No. 4 shall be corrected to read as under:-

“2.434 kgs ”.

-:7:-

20. 16 Chemicals & Allied Products

Sr.No.A2678 (Amended vide Public Notice No. 15 Dated: 01/06/2001)

1. The description of export item shall be corrected to read as under:-

“Aceto Acet Meta Xylidide”.

2. The description of import item at Sr. No. 5 shall be corrected (without any change in quantity) to read as under:-

“2,4 Xylidine”.

21. 3 Chemicals & Allied Products

Sr.No.A2690 (Amended vide Public Notice No. 20 Dated: 11/06/2001)

The description of export item shall be corrected to read as under:-

“Heavy Ends (HE) viz. FO(2-3 grades), LSHS (2-3 grades), HPS, Pitch, Asphalt (3-4 grades) Petroleum Bitumen (3-4 grades) Raw Coke and Calcined Coke, Slack Wax (2-3 grades), Paraffin Wax, Microcrystalline Wax, CBFS, RPO, Sulphur”.

22. 4 Chemicals & Allied Products

Sr.No.A2691 (Amended vide Public Notice No. 20 Dated: 11/06/2001)

The description of import item at Sr. No. 2, shall be corrected (without any change in quantity) to read as under:-

“2. Relevant catalysts and chemicals used in the manufacture of Paraxylene.”

23. 4 Chemicals & Allied Products

Sr.No.A2692 (Amended vide Public Notice No. 20 Dated: 11/06/2001)

The description of import item at Sr. No. 2, shall be corrected (without any change in quantity) to read as under:-

“2. Relevant catalysts and Chemicals used in the manufacture of Orthoxylene.”

-:8:-

24. 4 Chemicals & Allied Products

Sr.No.A2693 (Amended vide Public Notice No. 20 Dated: 11/06/2001)

The description of import item at Sr. No. 2, (with value) shall be deleted.
25. 469 Engineering Products

Sr. No. C- 274

1. The description of export item shall be substituted as under:-

“Radiators for transformers (made out of CRCA non-alloy steel sheet) coated with Zinc rich epoxy primer and Polyurethane epoxy paint system”.

26. 11 Engineering Products

Sr. No. C- 274 (As amended vide Public Notice No. 42 Dated: 01/12/2000)

The description and value of import item at Sr. No. 2 shall be amended to read as under:-

“2. Zinc Rich Epoxy primer – Cif value

and Polyurethane epoxy restricted

paint system to 10% of

the fob

value”.

27. 5-6

Engineering Product

Sr.No.C508 (Amended vide Public Notice No. 36 Dated: 03/10/2000)
The quantity of import item at Sr. No. 1(ii) shall be amended to read as under:-

“260 kg”

-:9:-

28. 748

Engineering Product

Sr.No.C1462
The description of export item shall be amended to read as under:-

“Frame & Field Assembly for 1.5 KW Automobile Starter Motor”.

29. 751

Engineering Product

Sr.No.C1481
The description of import item at Sr. No. 5 shall be amended (without any change in quantity) to read as under:-

“5. Celgard (R) 3400 Flat sheet/Film”.

30. 17-18

Engineering Product

Sr.No.C1552 (Amended vide Public Notice No. 38 Dated: 01/11/2000)
The description of import item at Sr. No. 5 shall be amended (without any change in quantity) to read as under:-

“5. Grade-F 169-05 Paper Rolls/Filter reels”.

31. 18

Engineering Product

Sr.No.C1553 (Amended vide Public Notice No. 38 Dated: 01/11/2000)
1. The description of import item at Sr. No. 2 shall be amended (without any change in quantity) to read as under:-

“2. Nylon Moulding Granules”.

2. The description of import item at Sr. No. 5 shall be amended (without any change in quantity) to read as under:-

“5. Celgard (R) 3400 Flat sheet/Film”.

-:10:-

32. 28

Engineering Product

Sr.No.C1588 (As amended vide Public Notice No. 53 Dated: 01/02/2001)
1. The description of export item shall be amended to read as under:-

“Nickel Cadmium Pocket Plate Batteries in Polypropylene containers with spares and standard accessories”.

2. The description of import item at Sr. No. 1 shall be amended (without any change in quantity) to read as under:-

“1. Nickel Hydroxide Power (45-65%

Nickel+Cobalt)”.

3. The description of import item at Sr. No. 2(b) shall be amended (without any change in quantity) to read as under:-

“2(b). Graphite flakes (99.62% Carbon

minimum)”.

4. The description of import item at Sr. No. 6 shall be amended (without any change in quantity) to read as under:-

“6. Polypropylene granules”.

33. 805

Food Products

Sr.No.E-51
The description of export item shall be amended to read as under:-

“Walnut Kernels/ Bitter Apricot Kernels packed in relevant packing material”.

34. 830-831

Leather Products

Sr.No.G-18
1. The description of import item at Sr. No. 1 shall be amended (without any change in quantity) to read as under:-

“Relevant Synthetic Leather for Gloves”.

2. The existing Note (No.1) under this norm shall be revised to read as under:-

“Note: 1. In case of export product Synthetic Golf Gloves, same norms as above

-:11:-

shall be applied. However, import item No.1 shall be allowed as 1(a) Relevant Synthetic Leather for Gloves both lakcut to the extent of 0.077 Sq.meter and 1(b) Relevant liner/lining material to the extent of 0.035 Sq.Meter”.
35. 871

Plastic Products

Sr.No.H-73
The norm covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
H-73 Epoxy Resin (Basic Liquid resin having epoxy value between 5.2 to 5.49) 1 kg 1. Epichlorohydrine

2. Biphenol-A

3. Caustic Soda Lye-(100%)

0.600 kg

0.676 kg

0.250 kg

36. 981-982

Textile Products

Sr.No.J-92
1. After the import item at Sr. No. 4 the following additional import item (with quantity) shall be added:-

“5. Fuel for power generation

Naphtha – 5.50 kg

OR

Furnace oil – 4.10 litres”.

2. The following notes shall be added below this norm:-

“1. Naphtha and Furnace oil shall be allowed only under AU condition.

2. The above norms for fuel are applicable only to composite units having spinning, weaving and processing activities. Also the said units should have facilities for captive power generation using naphtha/furnace oil.”

-:12:-

37. 982

Textile Products

Sr.No.J-96
1. After the import item at Sr. No. 5 the following additional import item (with quantity) shall be added:-

“6. Fuel for power generation

Naphtha – 1.22 kg

OR

Furnace oil – 0.92 litres”.

2. The following notes shall be added below this norm:-

“1. Naphtha and Furnace oil shall be allowed only under AU condition.

2. The above norms for fuel are applicable only to composite units having spinning, weaving and processing activities. Also the said units should have facilities for captive power generation using naphtha/furnace oil.”

-:13:-

Annexure “B” to the

Public Notice No. 30

Dated: 01/08/2001

CHEMICALS AND ALLIED PRODUCTS

Sr.No. Export Item Qty. Import Item Qty. Allowed
A2720 Octyl Phenol Ethoxylate (10 Moles) 1 kg 1. Octyl-Phenol 0.334 kg
A2721 Gumboro 228 E (1.5 ML) 1.5 ML Vial 1. SPF-Chicken Eggs

2. Seed Virus

3. Tryptose

4. Gentamycin sulphate

5. Gumboro Stabilizer

6. Glass Vials

7. Rubber Stoppers

8. Aluminium Caps

0.38970 Nos.

0.00016 Nos.

0.00159GMS

0.00040GMS

0.0008 Litres

1.08000 Nos.

1.08000 Nos.

1.08000 Nos.

A2722 Ortho Chloro Benzyl Chloride (2-Chloro Benzyl Chloride) 1 kg 1. Ortho Chloro Toluene 0.920 kg
A2723 Di-n-Butyl Amine 1 kg 1. N-Butanol 1.208 kg
A2724 1-Chloro Methyl Naphthalene 1 kg 1. Naphthalene

2. Para Formaldehyde

3. Per Chloro Ethylene

4. Potassium Carbonate

2.256 kg

1.692 kg

0.967 kg

0.670 kg

A2725 3 Methyl Diphenyl Amine’ 1 kg 1. Ortho Chloro Benzoic Acid

2. Meta Toluidine

3. Potassium Carbonate

4. Dimethyl Formamide

1.357 kg

0.928 kg

1.54 kg

2.00 kg

-:14:-

A2726 Thiophene Ester 1 kg 1. Methacryclonitrile

2. Thioglycolic Acid Methyl Ester

3. N-Heptane

0.81 kg/kg

1.29 kg/kg

0.497 kg/kg

A2727 IB Ma5 + ND Clone 30 (2 ML) 2 ML Vial 1. SPF-Chicken Egg

2. Seed Virus

3. Skimmed Milk Powder

4. Tryptose

5. Gentamycin Sulphate

6. Redox Stabilizer

7. Glass Vials

8. Rubber Stoppers

9. Aluminium Caps

0.19840 Nos.

0.00016 Nos.

0.14451GMS

0.00362 GMS

0.00036 GMS

0.00036 Litres

1.0800 Nos.

1.0800 Nos.

1.0800 Nos.

A2728 Diethyl Dipropyl Malonate 1 kg 1. Diethyl Malonate

2. N-Propyl Bromide

3. Ethyl Alcohol Undenatured

4. Sodium Hydroxide

5. Benzene

6. Acetic Acid

1.14 kg

1.465 kg

0.113 kg

0.490 kg

2.25 kg

0.100 kg

A2729 Antimony Triacetate (99.5% Purity) 1 kg 1. Antimony Trioxide 0.667 kg
A2730 2-Amino 4, 2, 4 Trichloro Diphenyl Ether (TADE) (Purity 99.5%) 1 kg 1. 2, 4 Dichloro Phenol

2. Potassium Hydroxide

0.862 kg

0.367 kg

A2731 Diethyl Hydroxylamine 85% 1 kg 1. Triethylamine

2. Hydrogen peroxide (50%)

1.20 kg

0.810 kg

-:15:-

A2732
Tetanus Antitoxin BP 1500 IU/ML in Ampoules 1 Lac Ampoules 1. Tetanus Antitoxin BP 4000 IU/ML

2. Glass Ampoules

47.625 Litres

115,000 Nos.

A2733 Amino Resin containing:

1) Dicyanodiamide formaldehyde resin: 24% Min. and

2) Calcium lingosulphonate: 39% Min.

1 kg 1. Dicyanodiamide (DCDA)

2. Formaldehyde, 37%

3. Calcium Lingnosulphonate

0.165 kg

0.216 kg

0.406 kg

A2734 Thiopental Sodium Sterile BP’ 1 kg 1. Methyl Sec Amyl Ethyl Cyano Acetate[Ethyl(1-Methyl) Butyl Ethyl Cyano Acetate 1.32 kg
A2735 Nonyl Phenol Ethoxylate (6 Moles) 1 MT 1. Nonyl-Phenol 469 kgm
A2736 Nonyl Phenol Ethoxylate (20 Moles) 1 MT 1. Nonyl Phenol 206.78 kgs
A2737 Nonyl Phenol Ethoxylate (30 Moles) 1 MT 1. Nonyl Phenol 148.78 kgs
A2738 Pigment Yellow 13 (Non rosinated) 1 kg 1. Ortho Nitro Chloro Benzene

2. Methanol

3. Sodium Nitrite

4. Aceto Acet Meta Xylidide

5. Dichlone

0.543 kg

0.322 kg

0.230 kg

0.635 kg

0.015 kg

-:16:-

A2739 Base Paper in Roll Form (width 10 CM to 40 CM) 1 kg 1. Base Paper in Jumbo Roll of relevant GSM and Grade 1.02 kg/kg

-:17:-

Annexure “C” to the

Public Notice No. 30

Dated: 01/08/2001

ENGINEERING PRODUCTS

Sr.No. Export Item Qty. Import Item Qty Allowed
C1679 Ferro Aluminium Containing 35-40% Aluminium 1 kg 1. Aluminium Scrap (Taint & Tabor)

2. Mild Steel Scrap

0.440 kg

0.635 kg

C1680 Power driven centrifugal Pump with motor of frame Size 1071 (0.5 HP) 1 No. 1. Cold rolled Non-oriented (CRNO) electrical Steel Sheets OR Sheets in coil form

2. Copper wire bars/ Cathodes/ Rods/ winding / winding wires/ strips

3. (a) Electrolytic Grade

Aluminium ingot

for rotor.

(b) Commercial grade

Aluminium ingot

for housing

4. Stainless Steel rod for Shaft

5. Relevant Ball/Sleeve/ Roller bearings

6. Insulation material consisting of paper, Nylon, Polyester, Amide, Nomex Film, Varnish, Polyester Cord, tape.

8 kgs

0.975 kgs

0.705 kgs

0.705 kgs

0.686 kgs

2 Nos.

upto 1.5% of FOB value

-:18:-

7. Packing material – Craft paper Lable, Name Plate, Ribbon

8. Motor Protectors/ Thermal Protectors.

9. Power Capacitors

10. Plastic Insulated wire/ cable

11. Terminals, Connectors

12. Non ferrous impeller-Copper

Tin

13. Mechanical Seal

As per packing Policy

1 No.

1 No.

6 mtr.

8 Nos.

0.567 kgs

0.068 kgs

1 No.

C1681 Power driven centrifugal Pump with motor of frame Size 1063 (0.5 HP) 1 No. 1. Cold rolled Non-oriented (CRNO) electrical Steel Sheets OR Sheets in coil form

2. Copper wire bars/ Cathodes/ Rods/ winding / winding wires/ strips

3. (a) Electrolytic Grade

Aluminium ingot

for rotor.

(b) Commercial grade

Aluminium ingot

for housing

4. Stainless Steel rod for Shaft

5. Relevant Ball/Sleeve/ Roller bearings

6. Insulation material consisting of paper, Nylon, Polyester, Amide, Nomex Film, Varnish, Polyester Cord, tape.

4.5 kgs

0.822 kgs

0.493 kgs

0.492 kgs

0.320 kgs

2 Nos.

upto 1.5% of FOB

-:19:-

7. Packing material – Craft paper Lable, Name Plate, Ribbon

8. Motor Protectors/ Thermal Protectors.

9. Power Capacitors

10. Non ferrous impeller-Copper

Tin

11. Mechanical Seal

As per packing Policy

1 No.

1 No.

0.190 kgs

0.042 kgs

1 No.

C1682 Power driven centrifugal Pump with 0.75 HP motor 1 No. 1. Cold rolled Non-oriented (CRNO) Electrical Steel Sheets OR Sheets in coil form

2. Copper wire bars/ Cathodes/ Rods/ winding / winding wires/ strips

3. (a) Electrolytic Grade

Aluminium ingot

for rotor.

(b) Commercial grade

Aluminium ingot

for housing

4. Stainless Steel rod for Shaft

5. Relevant Ball/Sleeve/ Roller bearings

6. Insulation material consisting of paper, Nylon, Polyester, Amide, Nomex Film, Varnish, Polyester Cord, tape.

10.01 kgs

1.36 kgs

0.74 kgs

0.74 kgs

0.796 kgs

2 Nos.

upto 1.5% of FOB value

-:20:-

7. Packing material – Craft paper Lable, Name Plate, Ribbon

8. Motor Protectors/ Thermal Protectors.

9. Power Capacitors

10. Plastic Insulated wire/ cable

11. Terminals, Connectors

12. Non ferrous impeller-Copper

Tin

13. Mechanical Seal

As per packing Policy

1 No.

1 No.

6 mtr.

8 Nos.

0.595 kgs

0.087 kgs

1 No.

C1683 Power driven centrifugal Pump with 1 HP motor 1 No. 1. Cold rolled Non-oriented (CRNO) Electrical Steel Sheets OR Sheets in coil form

2. Copper wire bars/ Cathodes/ Rods/ winding / winding wires/ strips

3. (a) Electrolytic Grade

Aluminium ingot

for rotor.

(b) Commercial grade

Aluminium ingot

for housing

4. Stainless Steel rod for Shaft

5. Relevant Ball/Sleeve/ Roller bearings

6. Insulation material consisting of paper, Nylon, Polyester, Amide, Nomex Film, Varnish, Polyester Cord, tape.

12 kgs

1.975 kgs

1.127 kgs

1.126 kgs

1.40 kgs

2 Nos.

upto 1.5% of FOB value

-:21:-

7. Packing material – Craft paper Lable, Name Plate, Ribbon

8. Motor Protectors/ Thermal Protectors.

9. Power Capacitors

10. Plastic Insulated wire/ cable

11. Terminals, Connectors

12. Non ferrous impeller-Copper

Tin

13. Mechanical Seal

As per packing Policy

1 No.

1 No.

6 mtr.

8 Nos.

0.931 kgs

0.136 kgs

1 No.

C1684 Microwave Ferrite -Garnet 100 kg 1. Yttrium Oxide

2. Iron Oxide

3. Aluminium Oxide

4. Tin Oxide

5. Indium Oxide

6. Poly Vinyl Alcohol

7. Alumina Substrate

8. Diamond Pellet Grinding Wheel

88.5 kg

95 kg

7.5 kg

4.5 kg

4.5 kg

|cif value |restricted to |10% of the |fob value

C1685 Ultra Press 1 No. 1. Eddy Current Meter

2. Clutch Break

3. Overload Protector

4. Fly wheel for 100T Press

5. Carbon Steel SAE 1050

6. AG Break Motor HAG

7. Rotary Cam Switch

8. Slide Counter

9. Motor Lubrication unit

1 No.

1 No.

1 No.

1 No.

1.05 /kg content in the export product

1 No.

1 No.

1 No.

1 No.

-:22:-

10. Bearing case for 100T press

11. Spherical Roll Bearing

12. Ball Bearing

13. C Roller Bearing

14. Surge Tank for 100 T press

15. Alloy Steel of relevant grade

16. Front GIB Plate for 100T press right hand

17. Front GIB Plate for 100T press left hand

18. GIB Plate Rod for 100T Press

19. MS Plates

20. Gear End Plate for 100T Press

21. Cylinder for 100T Press

22. Worm wheel 20Z4M 150D RH

23. Dual Solenoid valve ¾” BSP – 3 way

1 No.

1 No.

2 No.

1 No.

1 No.

1.05 /kg content in the export product

1 No.

1 No.

2 No.

1.05 /kg content in the export product

1 No.

1 No.

1 No.

1 No.

-:23:-

Annexure “D” to the

Public Notice No. 30

Dated: 01/08/2001

TEXTILE PRODUCTS

Sr.No. Export Item Qty. Import Item Qty Allowed
J346 i) Dyed Pile Fabric

ii) Dyed and Printed Pile Fabric/ Printed Pile fabric

1 Sq. Metre

1 Sq. Metre

1. Relevant Pile Grey Fabric

1. Relevant Pile Dyed Fabric

OR

Relevant Pile Grey

Fabric

1.01 Sq. Metre/per Sq. Metre content in the export product.

1.01 Sq. Metre/per Sq. Metre content in the export product

1.02 Sq. Metre/ Sq. Metre content in the export product

J347 Made-ups made from Pile fabrics 1 Sq. Metre 1. Relevant Processed Pile Fabrics 1.01 Sq. Metre/ Sq. Metre content in the export product

Sponsored

Join Taxguru’s Network for Latest updates on Income Tax, GST, Company Law, Corporate Laws and other related subjects.

Leave a Comment

Your email address will not be published. Required fields are marked *

Sponsored
Sponsored
Search Post by Date
July 2024
M T W T F S S
1234567
891011121314
15161718192021
22232425262728
293031