Public Notice No. 23 (RE-03)/2002-2007, issued on 10.09.2003, outlines amendments to the Export and Import Policy 2002-2007 and the Handbook of Procedures, Vol. 1 and Vol. 2. The notice introduces new entries in various sectors including chemicals, engineering, plastics, and textiles. For chemicals and allied products, new entries (A-3231 to A-3239) are added after Sr. No. A-3230. Similarly, in the engineering products category, entries C-1907 to C-1923 follow the existing entry at Sr. No. C-1906. The plastics products section sees new entries from Sr. No. H-532 to H-535 after H-531. Additionally, for textile products, a specific export item, “Cotton Rope made of Cotton yarn Coloured / Dyed” (Sr. No. J355), is added, with details regarding the export quantity and corresponding import item content. These amendments are part of an ongoing update to ensure smoother export-import procedures and compliance with the revised policy.
GOVERNMENT OF INDIA
MINISTRY OF COMMERCE & INDUSTRY
DEPARTMENT OF COMMERCE
PUBLIC NOTICE NO. 23 (RE- 03)/ 2002-2007
NEW DELHI : DATED : 10/09/2003.
Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.
2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of Foreign Trade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.
3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure “A” to this Public Notice shall be made.
4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-
CHEMICALS AND ALLIED PRODUCTS
After the existing entry at Sr.No.A-3230, new entries at Sr. No. A-3231 to A-3239 shall be added as per Annexure ”B” to this Public Notice.
-:2:-
ENGINEERING PRODUCTS
After the existing entry at Sr.No.C-1906, new entries at Sr.No.C-1907 to C-1923 shall be added as per Annexure ”C” to this Public Notice.
PLASTICS PRODUCTS
After the existing entry at Sr. No. H-531, new entries at Sr. Nos. H-532 to H-535 shall be added as per Annexure ”D” to this Public Notice.
TEXTILE PRODUCTS
After the existing entry at Sr.No.J-354, new entry at Sr.No.J-355 shall be added as per Annexure ”E” to this Public Notice.
5. This issues in public interest.
(L. MANSINGH)
DIRECTOR GENERAL OF FOREIGN TRADE
-:3:-
Annexure “A” to the
Public Notice No. 23
Dated: 10/09/2003
AMENDMENTS/CORRECTIONS
| Sr.
No. |
Page
No. |
Reference | Amendments/Corrections |
| 1 | 2 | 3 | 4 |
| 1. | 99 | Chemicals & Allied Products
Sr.No.A661 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed | |
| A661 | Fast Red B Base | 1 kg | 1. Ortho Anisidine
2. Acetic Anhydride |
1.0 kg
0.88 kg |
|
| 2. | 5 | Chemicals & Allied Products
Sr.No.A1659 (Amended vide Public Notice No.03 Dated:31/03/2003) |
The norm covered by this entry shall be substituted by the following:- |
| Sr. No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1659 | Trizophos Technical (70%) | 1 kg | 1. Phenyl Hydrazine Free Base
OR Phenyl Hydrazine Sulphate 2. O.O. Diethyl Thiophosphoric Chloride 3. Formic Acid 4. Orthoxylene OR Solvent Naphtha |
0.370 kg
0.540 kg 0.510 kg 0.200 kg 0.500 kg 0.450 kg |
-:4:-
| 3. | 301 | Chemicals & Allied Products
Sr.No.A2337 |
After the description of import item at Sr. No. 1, the following import item (with quantity) shall be added:-
“OR 1. Gypsum (Calcium – 1.24 kg” Sulfate Dihydrate) |
| 4. | 342 | Chemicals & Allied Products
Sr.No.A2704 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2704 | Printing Ink Vehicle Gel (Solid content 59+/-2%) | 1 kg | 1. Soya Long Oil Alkyd Resin of 70% Long Oil Length having Solid content 100%
2. Soyabean Oil 3. Texanol Isobutyrate 4. Petroleum Distillate (Distillation Range 240-330 Degree Celsius 5. Phenol Modified Rosin Ester 6. Antioxidant namely BHT and MEHQ |
0.105 kg
0.020 kgs 0.052 kgs 0.360 kgs 0.460 kgs 0.010 kgs |
-:5:-
| 5. | 366 | Chemicals & Allied Products
Sr.No.A2897 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2897 | Calcium Dodecyl Phenate Detergent (Lubricating Oil Additive) Containing Calcium Dodecyl Phenate 40% Min. | 1 kg | 1. Dodecyl Phenol
2. Isodecyl Alcohol 3. C20-C24 Linear Alkyl Benzene Sulfonic Acid 4. Slaked Aid 5. Filter Aid 6. Monoethelene Glycol (MEG) 7. Base Oil |
0.367 kg
0.010 kg 0.023 kg 0.141 kg 0.015 kg/kg 0.0724 kg/kg 0.387 kg/kg |
| 6. | 11 | Chemicals & Allied Products
Sr.No.A2980 (amended vide Public Notice No. 10 Dated:01.05.2002) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2980 | Manganese Oxide (MnO) | 1 MT | 1. Manganese Ore
2. Metallurgical Coke |
1.25 MT
0.25 MT |
| 7. | 17 | Chemicals & Allied Products
Sr.No.A2995 (Amended Vide Public Notice No. 20 Dated: 01/07/2002) |
1. The description of export item shall be amended to read as under:-
“Anticorrosion VCI Wrapping Paper having coating of 15+/-1% grams of VCI content per Sq.mtr.” 2. The description of import item at Sr. No. 2, (with quantity) shall be amended to read as under:- “VCI Solutions of different – 0.03 kg grades (having Solid content of 50 +/-1%)” |
-:6:-
| 8. | 24 – 25 | Chemicals & Allied Products
Sr.No.A-3198, A-3199, A-3200 and 3201 (amended vide Public Notice No. 15 Dated:07/07/2003) |
These norms at Sr. Nos. A-3198, A-3199, A-3200 and 3201 shall be deleted from Chemical & Allied products Group and Shifted to Plastics Products Group. |
| 9. | 494-495 | Engineering Product
Sr.No.C134 |
The norm covered by this entry shall be deleted. |
| 10. | 495-496 | Engineering Product
Sr.No.C136 |
The norm covered by this entry shall be deleted. |
| 11. | 499 | Engineering Product
Sr.No.C149 |
The norm covered by this entry shall be deleted. |
| 12. | 530 | Engineering Product
Sr.No.C267 |
The description of import item at Sr. No. 2, (with quantity) shall be amended to read as under:-
“PVC Compound – 74.80 kgs OR (a) PVC Resin – 44.880 kgs (b) DOP – 22.440 kgs (c) Fillers – 7.480 kgs” |
| 13. | 557 | Engineering Product
Sr.No.C374 |
The Foot Note below this entry shall be added:-
“Note: Incase the above nuts are surface coated with Bonded Solid Film Lubricant EVERLUBE 6102-G or equivalent, the same may also be allowed to the extent of 0.006 Lit/kg of the export product”. |
-:7:-
| 14. | 569 | Engineering Product
Sr.No.C419 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C419 | Jigsaw Blades/ Sabresaw Blades/ Body Saw Blades | 1 kg | 1. Relevant High Speed Steel Strips/ Bimetal Strips | 1.57 kg |
| 15. | 631 | Engineering Product
Sr.No.C639 |
The description of export item shall be amended to read as under:-
“Round / Elliptical / Oval Tin Plate Container and/or Components thereof” |
| 16. | 636 | Engineering Product
Sr.No.C682 |
The norm covered by this entry shall be deleted. |
| 17. | 653 | Engineering Product
Sr.No.C804 |
The norm covered by this entry shall be deleted. |
| 18. | 654 | Engineering Product
Sr.No.C813 |
The description of import item at Sr.No. 1, (without any change in quantity) shall be amended to read as under:-
“Non Alloy HR/CR Steel Sheets/ Strips/ Wide Coils OR Stainless Steel Sheets/ Strips/ Wide Coils” |
-:8:-
| 19. | 664 | Engineering Product
Sr.No.C873 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C873 | Single/ Twin Type Shaving System, Disposable Razor Blades (single/ double / triple blades) with / without Lubra exported either with fixed handle or handle and magazine separately in different types of packings | 1 kg | 1. Cold Rolled Stainless Steel Strips
2. ABS (for handle, seat, top cap and spacer 1 & 2) 3. High impact / GP Polystyrene (for Protective Cap/ Magazine) 4. Polyox Coagulant 5. Polyox VSRS 750 6. GP Polystrene 7. Polyterafluoro-ethylene 8. Grinding Wheel 9. Slitting Sheel 10. Krytox 11. Aluminium Strips/ Coil/ Sheet (for spacer / clamps) |
1.75 kgs/kg content in export product
1.10 kgs/kg content in export product 1.10 kgs/kg content in export product |All the three |items |together 1.30 |kg/kg weight |of the Lubra |strips in the |export |product |Consumables|CIF value |taken |together may |be restricted |to 1% of the |FOB value 1.06 kg/kg content of the export product |
-:9:-
| 12. T P Elastomer for Sleeve
13. High impact Polystyrene (for Top Cap seat & handle) 14. Brass Strips / Zinc Mazak (for razor head and razor handle rib) 15. Packing material |
1.10 kg/kg content in the export product
1.10 kg/kg content in the export product 1.02 kg/kg content in the export product As per packing policy |
|||
| Note : Wherever handles are sought for import separately, the same be allowed as components on net to net basis with accountability clause and in such cases the rest of the raw materials will have to be accounted for as per the norms above. | ||||
| 20. | 664 | Engineering Product
Sr.No.C874 |
The norm covered by this entry shall be deleted. |
| 21. | 664 – 665 | Engineering Product
Sr.No.C875 |
The norm covered by this entry shall be deleted. |
| 22. | 665 | Engineering Product
Sr.No.C876 |
The norm covered by this entry shall be deleted. |
| 23. | 665 | Engineering Product
Sr.No.C877 |
The norm covered by this entry shall be deleted. |
-:10:-
| 24. | 665 – 666 | Engineering Product
Sr.No.C878 |
The norm covered by this entry shall be deleted. |
| 25. | 666 | Engineering Product
Sr.No.C879 |
The norm covered by this entry shall be deleted. |
| 26. | 670 | Engineering Product
Sr.No.C915 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C915 | Cold Rolled Non Alloy/ Alloy Steel Hardened and Tempered Saw Blades/ Handsaw Blades | 1 MT | 1. Hot Rolled Alloy/ Non Alloy Steel Strips / Wide Coils of relevant grade | 1.20 MT |
| 27. | 826 | Engineering Product
Sr.No.C1553 |
The description of import item at Sr. No. 3, (without any change in quantity) shall be amended to read as under:-
“Non Woven Separators” |
| 28. | 831 | Engineering Product
Sr.No.C1588 |
The description of import item at Sr. No. 1, (with quantity) shall be substituted with the following:-
“Nickle Hydroxide Powder – 8.63 gms/AH (45-65% Nickel + Cobalt) OR Nickle Anode – 6.79 gms/AH OR Hydrated Nickle Sulphate – 27.18 gms/AH (containing 20-23% Nickel)” |
| 29. | 840 | Engineering Product
Sr.No.C1638 |
After the import item at Sr. No. 1, the following additional import item (with quantity) shall be added:-
“2. Aluminium Scrap – 1.20 kg” |
-:11:-
| 30. | 858 | Engineering Product
Sr.No.C1688 |
The norm covered by this entry shall be deleted. |
| 31. | 28 | Engineering Product
Sr.No.C1887 (Notified vide Public Notice No.10 Dated:30.05.2003) |
The description of export item shall be amended to read as under:-
“Single / Double Wall Copper coated Steel Tubes” |
| 32. | 28 | Engineering Product
Sr.No.C1891 (Notified vide Public Notice No.15 Dated:07/07/2003) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C1891 | Radiator made of Aluminium with Plastic Tank | 1 No. | 1. Aluminium Tube
2. Aluminium Foil 3. Aluminium Sheets/ Strips 4. Brazing Flux 5. Relevant Plastic Tanks OR Relevant Plastic Granule |
1.02 kg/kg content in the export product
1.02 kg/kg content in the export product 1.03 kg/kg content in the export product Up to 5% of FOB value Net to net 1.05 kg./kg content in tank |
-:12:-
| 33. | 12 | Food Products
Sr.No.E-42 (Amended vide Public Notice No. 46 Dated:06.11.2002) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| E-42 | Soyabean Extraction (Soyabean De-oiled cake or meal) | 1 MT | 1. Hexane
2. Coal 3. Diesel (for power generation) OR Kerosene (for Power Generation) |
9.20 Ltrs.
110 kg 11 Ltrs 11 Ltrs |
| Note:1. Item No. 3 i.e. Diesel or Kerosene shall be allowed only under A.U. Condition.
Note:2 The norms for Diesel/ Kerosene are applicable only to those units which have facility for captive power generation using Diesel / Kerosene as fuel. Note:3 Item No.2, i.e. Coal is allowed as a process material essentially for heating purpose in the manufacture of Soyabean extraction and not for power generation for running the plant |
||||
| 34. | 915 | Food Product
Sr.No.E-93 |
The description of export item shall be amended to read as under:-
“Natural Sesame Seeds/ Sun Hemp Seeds/ Safflower Seeds/ Sesbenia Seeds” |
| 35. | 938 | Leather Product
Sr.No.G-18 |
The description of export item shall be amended to read as under:-
“Leather – Cum-Synthetic Golf Gloves / Synthetic Golf Gloves with Leather” |
-:13:-
| 36. | 981 | Plastics Products
Sr.No. H-119 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| H-119 | High Impact Polystyrene Resin | 1 kg | 1. Styrene Monomer 99%
2. Polybutadiene Rubber 3. Plasticizer 4. Mineral Oil (Liquid Paraffin) OR 1. Styrene Monomer 2. Polybutadiene Rubber 3. Mineral Oil (Liquid Paraffin) |
0.9715 kg
0.0632 kg 0.0116 kg 0.0103 kg 0.9470 kg 0.0875 kg 0.0221 kg |
| 37. | 1059 | Sports Goods
Sr.No.I-26 |
The description of export item shall be amended to read as under:-
“Football / Soccer Ball / Net Ball/ Rugby Ball made out of PVC / PU Leather cloth with Butyl Bladder / Latex Bladder and supported with relevant Layers of Polyester Viscose Fabric / Polyester Fabric and or Cotton Fabric Size-5” |
| 38. | 1059 | Sports Goods
Sr.No.I-27 |
The description of export item shall be amended to read as under:-
“Football / Soccer Ball / Net Ball/ Rugby Ball made out of PVC / PU Leather cloth with Butyl Bladder / Latex Bladder and supported with relevant Layers of Polyester Viscose Fabric / Polyester Fabric and or Cotton Fabric Size-4” |
-:14:-
| 39. | 1059 | Sports Goods
Sr.No.I-28 |
The description of export item shall be amended to read as under:-
“Football / Soccer Ball / Net Ball/ Rugby Ball made out of PVC / PU Leather cloth with Butyl Bladder / Latex Bladder and supported with relevant Layers of Polyester Viscose Fabric / Polyester Fabric and or Cotton Fabric Size-3” |
| 40. | 31 | Sports Goods
Sr.No.I-39 (Amended vide Public Notice No.46 Dated:06.11.2002) |
The description of export item shall be amended to read as under:-
“Football / Soccer Ball / Net Ball/ Rugby Ball made out of PVC / PU Leather cloth with Butyl Bladder / Latex Bladder and supported with relevant Layers of Polyester Viscose Fabric / Polyester Fabric and or Cotton Fabric Size-XS (Extra Small)” |
| 41. | 31- 32 | Sports Goods
Sr.No.I-40 (Amended vide Public Notice No.46 Dated:06.11.2002) |
The description of export item shall be amended to read as under:-
“Football / Soccer Ball / Net Ball/ Rugby Ball made out of PVC / PU Leather cloth with Butyl Bladder / Latex Bladder and supported with relevant Layers of Polyester Viscose Fabric / Polyester Fabric and or Cotton Fabric Size-1” |
| 42. | 32 | Sports Goods
Sr.No.I-41 (Amended vide Public Notice No.46 Dated:06.11.2002) |
The description of export item shall be amended to read as under:-
“Football / Soccer Ball / Net Ball/ Rugby Ball made out of PVC / PU Leather cloth with Butyl Bladder / Latex Bladder and supported with relevant Layers of Polyester Viscose Fabric / Polyester Fabric and or Cotton Fabric Size-2” |
-:15:-
| 43. | 11 | Textile Products
Sr.No.J-96 (Notified vide Public Notice No. 10 Dated:30/05/2003) |
The description of import item at Sr. No. 1, (with quantity) shall be substituted by the following:-
“1. Raw Cotton – 1.24 kg/kg content in the export product OR Cotton Yarn – 1.04 kg/kg content in the export product |
| AND/OR
Cotton Blended – 1.05 kg/kg Yarn with Manmade content in the Yarn (excluding export product Spandex/ Lycra Yarn) Like Polyester / Viscose/ Acrylic / Nylon / Silk/ Tencel (Lyocell Fiber) AND/OR Manmade Yarn (Excluding – 1.10 kg/kg Spandex/ Lycra Yarn) Like content in Acrylic / Polyester / Nylon/ in the Tencel (Lyocell Fibre) export Product” |
| 44. | 1126 | Miscellaneous Products
Sr.No.K-46 |
The description of import item at Sr. No. 1, (with quantity) shall be amended to read as under:-
“1. Glass Rods – 0.50 kg OR Unfinished Glass – 0.20 kg Chatons” |
-:16:-
| 45. | 1129 | Miscellaneous Products
Sr.No.K-58 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| K-58 | Playing Cards Plastic Coated | 1 kg | 1. Card Board / Art Card Coated Other than Ivory Board (GSM 135 – 300) only relevant item to | 1.20 kg/kg content in the export product |
| be used in the export shall be allowed for import
2. (a) Ketonic Resin 2. (b) Silicon Fluid OR 2. Water Based Coatings 3. Printing Ink 4. Graphic Art Film/ P.S. Offset Plates / Offset Rubber Blankets / Stamping Foil |
Up to 6% by weight of card board
Up to 2% by weight of card board Up to 8% by weight of card board Up to 2 % by weight of card board Up to 3% of the FOB value |
| 46. | 1133 | Miscellaneous Products
Sr.No.K-86 |
1. The description of export item shall be amended to read as under:-
“Mineral Water in PET/ PVC Bottles Packed in Polypropylene Bags and Master Corrugated Boxes” 2. The description of import item at Sr. No. 1(b) (with quantity) shall be deleted. |
-:17:-
Annexure “B” to the
Public Notice No. 23
Dated: 10/09/2003
CHEMICALS AND ALLIED PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3231 | Hydroxy Propyl Methyl Cellulose Phthalate Phthalyl content (27+/-7%) | 1 kg | 1. Hydroxy Propyl Methyl Cellulose
2. Phthalic Anhydride |
0.973 kg
0.270 kg |
| A3232 | Reactive Blue 221 (Reactive Blue BRX) | 1 kg | 1. Cyanuric Chloride
2. N-Ethyl Meta Base Ester |
0.187 kg
0.310 kg |
| A3233 | Multi-layer Plastic laminated Tubes with/ without Caps (5 layer printed) | 1 kg | 1. Relevant Plastic laminated Film (Core of Aluminium Foil covered on both sides with plastic film)
2. U.V. Ink 3. U.V. Varnish |
1.12 kg/kg content in the export product
0.5% of weight of Multilayer film in the export product 0.3 of weight of Multilayer film in the export product |
| A3234 | Cyclopentyl Bromine | 1 kg | 1. Cyclo Pentane
2. Hydrobromic Acid 48% OR Hydrobromic Acid 47% |
0.634 kg
1.617 kg 1.652 kg |
-:18:-
| A3235 | Polyolefin Amide Alkeneamine – A Dispersant Additive for Lubricating Oil containing base oil 40% and Polybutene Succinic Anhydride Ethylene Amine condensed component – 60% | 1 kg | 1. Polybutene
2. Maleic Amine 3. Ethylene Amine 4. 150 Solvent Neutral (Mineral Oil) 5. Diatomaccous Earth (Filter add) |
0.520 kg
0.0569 kg 0.0310 kg 0.400 kg 0.0007 kg |
| A3236 | SBR Latex (50% Solid content) | 1 kg | 1. 1, 3-Butadiene
2. Styrene Monomer 3. Acrylic Acid 4. Anionic Surfactant (i.e. Dowfax 2 A1 & Calfax DB-45) 5. Tertiary Dodecyl Mercaptan 6. HDPE (Packing material) |
0.186 kg
0.280 kg 0.019 kg 0.014 kg 0.00075 kg As per packing policy |
| A3237 | Flush Cyan for Printing Ink containing Pigment minimum 42% and Solid Resin 37% | 1 kg | 1. Pigment Cyan namely Pigment Phthalocyanine Blue 1450/Pigment Copper Phthalocyaine Blue /Copper Phthalocyaine Crude (PCB Free) (CI No. 74160) (Pigment Blue 15)
2. Printing Ink Vehicle – Plain (Solid content 64-68%) 3. Soya Long Oil Length Alkyd Resin of 70% Oil Length having Solid content 100% |
0.42 kg
0.415 kg 0.095 kg |
-:19:-
| 4. Petroleum Distillate (Distillation Range 240 Degree – 330 Degree Celsius)
5. Olyl Alcohol 6. Antioxidant |
0.035 kg
0.021 kg 0.0057 kg |
|||
| A3238 | Lubricating Oil Additive (200 TBN) containing Calcium Dodecyl Phenate 40% Min. and Polybutene Succinic Anhydride 4.5% | 1 kg | 1. Dodecyl Phenol
2. 150 Solvent Neutral 3. Polybutene 4. Hydrated Lime 5. Filter Aid (Diatomaceous Earth) |
0.367 kg
0.387 kg 0.042 kg 0.141 kg 0.015 kg |
| A3239 | Propanthlene Bromide | 1 kg | 1. Xanthenoic Acid
2. Di-Isopropyl N-ethyechloride amine Hcl. (DIPC Hcl) 3. Methyl Bromide 4. Sodium Carbonate 5. Sodium Sulphate 6. Chloroform Tech. 7. Methyl Ethyl Ketone 8. Activated Charcoal |
0.625 kg
0.55 kg 0.30 kg 0.35 kg 0.100 kg 4.50 kg 5.97 kg 0.02 kg |
-:20:-
Annexure “C” to the
Public Notice No. 23
Dated: 10/09/2003
ENGINEERING PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C1907 | Decanter Centrifuge | 1 No. | 1. H.R.S.S. 316 Plate 6 mm Thick for Flight
2. S.S. 316 Sheet 3 mm Thick for casing assembly 3. M.S. Box Section 4. Non Alloy Steel Round Bar 5. S.S. 316 Bar 6. Consumable including Hard Surfacing Powder 7. Component |
1.7 kg/kg content in export product
1.2 kg/kg content in export product 1.01 kg/kg content in export product 1.7 kg/kg content in export product 1.01 kg/kg content in export product 1% of FOB value As per General Note No.4 for Engg. Product inserted by Public Notice No. 46 dated 06.11.2002 |
-:21:-
| C1908 | Industrial Separator | 1 No. | 1. Stainless Steel Sheet of relevant grade
2. S.S. Round Bar of relevant grade 3. Component |
1.30 kg/kg content in the export product
1.70 kg/kg content in the export product As per General Note No.4 for Engg. Product inserted by Public Notice No. 46 dated 06.11.2002 |
| C1909 | Lightening Arrestor (Surge Arrestor) Distribution Class | 1 No. | 1. Tubular Porcelain Bushings
OR I. Inputs for Tubular Porcelain Bushings II. Aluminium Ingots III. Metal Oxide Varistor OR |
Net to net
Maximum Quantity = KV rating of Arrestor x 0.0002 x Inputs of A-1804 KV rating of Arrestor x 11 gms Nos = KV rating of Arrestor divided by KV rating of Varistor |
-:22:-
| III. Inputs for Metal Oxide Varistor
1. Spray Dried Metal Oxide Powder OR 1. Metal or Metal Oxide as described below a. Zinc Oxide OR a. Zinc Metal b. Bismuth Oxide OR b. Bismuth Metal c. Cobalt Oxide OR c. Cobalt Metal d. Nickel Oxide OR |
1.04 kg/kg content in export product
1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product |
-:23:-
| d. Nickel Metal
e. Antimony Trioxide f. Chromium Oxide g. Tin Oxide h. Manganese Oxide OR h. Manganese Metal OR h. Manganese carbonate i. Polyvinyl Alcohol j. Aluminium Poly Acrylate OR j. Decyl Amine Acetate k. Glass Frit – Silver Oxide |
1.10 kg/kg content in export product
1.08 kg/kg content in export product 1.08 kg/kg content in export product 1.08 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product 0.71 gm/KV 0.80 gm/KV 0.80 gm/KV 0.63 gm/KV |
-:24:-
| C1910 | Lightening Arrestor (Surge Arrestor) Discharge Class I | 1 No. | I. Tubular Porcelain Bushings
OR I. Inputs for Tubular Porcelain Bushings II. Aluminium Ingots III. Metal Oxide Varistor OR |
Net to net
Maximum Quantity = KV rating of Arrestor x 0.000744 x Inputs of A-1804 KV rating of Arrestor x 157 gms Nos = KV rating of Arrestor divided by KV rating of Varistor |
| III. Input for Metal
Oxide Varistor 1. Spray Dried Metal Oxide Powder OR 1. Metal or Metal Oxide as described below a. Zinc Oxide OR a. Zinc Metal |
1.04 kg/kg content in export product
1.08 kg/kg content in export product 1.10 kg/kg content in export product |
-:25:-
| b. Bismuth Oxide
OR b. Bismuth Metal c. Cobalt Oxide OR c. Cobalt Metal d. Nickel Oxide OR d. Nickel Metal e. Antimony Trioxide f. Chromium Oxide g. Tin Oxide |
1.08 kg/kg content in export product
1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.08 kg/kg content in export product 1.08 kg/kg content in export product |
-:26:-
| h. Manganese Oxide
OR h. Manganese Metal OR h. Manganese carbonate i. Polyvinyl Alcohol j. Aluminium Poly Acrylate OR J. Decyl Amine Acetate K. Glass Frit – Silver Oxide |
1.08 kg/kg content in export product
1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.13 gm/KV 1.23 gm/KV 1.23 gm/KV 0.9 gm/KV |
|||
| C1911 | Lightening Arrestor (Surge Arrestor) Discharge Class II | 1 No. | I. Tubular Porcelain Bushings
OR I. Inputs for Tubular Porcelain Bushings II. Aluminium Ingots III. Metal Oxide Varistor OR |
Net to net
Maximum Quantity = KV rating of Arrestor x 0.000767 x Inputs of A-1804 KV rating of Arrestor x 141 gms Nos = KV rating of Arrestor divided by KV rating of Varistor |
-:27:-
| Input for Metal
Oxide Varistor 1. Spray Dried Metal Oxide Powder OR 1. Metal or Metal Oxide as described below a. Zinc Oxide OR a. Zinc Metal |
1.04 kg/kg content in export product
1.08 kg/kg content in export product 1.10 kg/kg content in export product |
|||
| b. Bismuth Oxide
OR b. Bismuth Metal c. Cobalt Oxide OR c. Cobalt Metal d. Nickel Oxide OR |
1.08 kg/kg content in export product
1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product |
-:28:-
| d. Nickel Metal
e. Antimony Trioxide f. Chromium Oxide g. Tin Oxide h. Manganese Oxide OR h. Manganese Metal OR h. Manganese carbonate i. Polyvinyl Alcohol j. Aluminium Poly Acrylate OR J. Decyl Amine Acetate K. Glass Frit – Silver Oxide |
1.10 kg/kg content in export product
1.08 kg/kg content in export product 1.08 kg/kg content in export product 1.08 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.52 gm/KV 1.63 gm/KV 1.63 gm/KV 1.23 gm/KV |
-:29:-
| C1912 | Lightening Arrestor (Surge Arrestor) Discharge Class III | 1 No. | I. Tubular Porcelain Bushings
OR I. Inputs for Tubular Porcelain Bushings II. Aluminium Ingots III. Metal Oxide Varistor OR |
Net to net
(KV rating of Arrestor x 0.000812 x Inputs of A-1804) KV rating of Arrestor x 127 gms Nos = KV rating of Arrestor divided by KV rating of Varistor |
| Input for Metal
Oxide Varistor 1. Spray Dried Metal Oxide Powder OR 1. Metal or Metal Oxide as described below a. Zinc Oxide OR a. Zinc Metal |
1.04 kg/kg content in export product
1.08 kg/kg content in export product 1.10 kg/kg content in export product |
-:30:-
| b. Bismuth Oxide
OR b. Bismuth Metal c. Cobalt Oxide OR c. Cobalt Metal d. Nickel Oxide OR |
1.08 kg/kg content in export product
1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product |
|||
| d. Nickel Metal
e. Antimony Trioxide f. Chromium Oxide g. Tin Oxide |
1.10 kg/kg content in export product
1.08 kg/kg content in export product 1.08 kg/kg content in export product 1.08 kg/kg content in export product |
-:31:-
| h. Manganese Oxide
OR h. Manganese Metal OR h. Manganese carbonate i. Polyvinyl Alcohol j. Aluminium Poly Acrylate OR J. Decyl Amine Acetate K. Glass Frit – Silver Oxide |
1.08 kg/kg content in export product
1.10 kg/kg content in export product 1.08 kg/kg content in export product 2.34 gm/KV 2.53 gm/KV 2.53 gm/KV 1.93 gm/KV |
|||
| C1913 | Lightening Arrestor (Surge Arrestor) Discharge Class IV | 1 No. | I. Tubular Porcelain Bushings
OR I. Inputs for Tubular Porcelain Bushings II. Aluminium Ingots III. Metal Oxide Varistor OR |
Net to net
Maximum Quantity = (KV rating of Arrestor x 0.000784 x Inputs of A-1804) KV rating of Arrestor x 138 gms Nos = KV rating of Arrestor divided by KV rating of Varistor |
-:32:-
| Input for Metal
Oxide Varistor 1. Spray Dried Metal Oxide Powder OR 1. Metal or Metal Oxide as described below a. Zinc Oxide OR a. Zinc Metal |
1.04 kg/kg content in export product
1.08 kg/kg content in export product 1.10 kg/kg content in export product |
|||
| b. Bismuth Oxide
OR b. Bismuth Metal c. Cobalt Oxide OR c. Cobalt Metal d. Nickel Oxide OR |
1.08 kg/kg content in export product
1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product |
-:33:-
| d. Nickel Metal
e. Antimony Trioxide f. Chromium Oxide g. Tin Oxide |
1.10 kg/kg content in export product
1.08 kg/kg content in export product 1.08 kg/kg content in export product 1.08 kg/kg content in export product |
|||
| h. Manganese Oxide
OR h. Manganese Metal OR h. Manganese carbonate i. Polyvinyl Alcohol j. Aluminium Poly Acrylate OR J. Decyl Amine Acetate K. Glass Frit – Silver Oxide |
1.08 kg/kg content in export product
1.10 kg/kg content in export product 1.08 kg/kg content in export product 3.56 gm/KV 3.85 gm/KV 3.85 gm/KV 2.83 gm/KV |
-:34:-
| C1914 | Metal Oxide Varistor ## (MOV) Distribution Class | 1 No. | 1. Spray Dried Metal Oxide Powder
OR 1. Metal or Metal Oxide as described below a. Zinc Oxide OR a. Zinc Metal b. Bismuth Oxide OR b. Bismuth Metal c. Cobalt Oxide OR c. Cobalt Metal d. Nickel Oxide OR d. Nickel Metal |
1.04 kg/kg content in export product
1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product |
-:35:-
| e. Antimony Trioxide
f. Chromium Oxide g. Tin Oxide h. Manganese Oxide OR h. Manganese Metal OR h. Manganese carbonate i. Polyvinyl Alcohol j. Aluminium Poly Acrylate OR J. Decyl Amine Acetate K. Glass Frit – Silver Oxide |
1.08 kg/kg content in export product
1.08 kg/kg content in export product 1.08 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product 0.71 gm/KV 0.80 gm/KV 0.80 gm/KV 0.63 gm/KV |
-:36:-
| C1915 | Metal Oxide Varistor ## (MOV) Distribution Class I | 1 No. | 1. Spray Dried Metal Oxide Powder
OR 1. Metal or Metal Oxide as described below a. Zinc Oxide OR a. Zinc Metal b. Bismuth Oxide OR b. Bismuth Metal c. Cobalt Oxide OR c. Cobalt Metal d. Nickel Oxide OR d. Nickel Metal |
1.04 kg/kg content in export product
1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product |
-:37:-
| e. Antimony Trioxide
i. Chromium Oxide j. Tin Oxide k. Manganese Oxide OR h. Manganese Metal OR h. Manganese carbonate i. Polyvinyl Alcohol j. Aluminium Poly Acrylate OR J. Decyl Amine Acetate K. Glass Frit – Silver Oxide |
1.08 kg/kg content in export product
1.08 kg/kg content in export product 1.08 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.13 gm/KV 1.23 gm/KV 1.23 gm/KV 0.9 gm/KV |
-:38:-
| C1916 | Metal Oxide Varistor ## (MOV) Distribution Class II | 1 No. | 1. Spray Dried Metal Oxide Powder
OR 1. Metal or Metal Oxide as described below a. Zinc Oxide OR a. Zinc Metal b. Bismuth Oxide OR b. Bismuth Metal c. Cobalt Oxide OR c. Cobalt Metal d. Nickel Oxide OR d. Nickel Metal |
1.04 kg/kg content in export product
1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product |
-:39:-
| e. Antimony Trioxide
f. Chromium Oxide g. Tin Oxide h. Manganese Oxide OR h. Manganese Metal OR h. Manganese carbonate i. Polyvinyl Alcohol j. Aluminium Poly Acrylate OR J. Decyl Amine Acetate K. Glass Frit – Silver Oxide |
1.08 kg/kg content in export product
1.08 kg/kg content in export product 1.08 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.52 gm/KV 1.63 gm/KV 1.63 gm/KV 1.23 gm/KV |
-:40:-
| C1917 | Metal Oxide Varistor ## (MOV) Distribution Class III | 1 No. | 1. Spray Dried Metal Oxide Powder
OR 1. Metal or Metal Oxide as described below a. Zinc Oxide OR a. Zinc Metal b. Bismuth Oxide OR b. Bismuth Metal c. Cobalt Oxide OR c. Cobalt Metal d. Nickel Oxide OR d. Nickel Metal |
1.04 kg/kg content in export product
1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product |
-:41:-
| e. Antimony Trioxide
f. Chromium Oxide g. Tin Oxide h. Manganese Oxide OR h. Manganese Metal OR h. Manganese carbonate i. Polyvinyl Alcohol j. Aluminium Poly Acrylate OR J. Decyl Amine Acetate K. Glass Frit – Silver Oxide |
1.08 kg/kg content in export product
1.08 kg/kg content in export product 1.08 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product 2.34 gm/KV 2.53 gm/KV 2.53 gm/KV 1.93 gm/KV |
-:42:-
| C1918 | Metal Oxide Varistor ## (MOV) Distribution Class IV | 1 No. | 1. Spray Dried Metal Oxide Powder
OR 1. Metal or Metal Oxide as described below a. Zinc Oxide OR a. Zinc Metal b. Bismuth Oxide OR b. Bismuth Metal c. Cobalt Oxide OR c. Cobalt Metal d. Nickel Oxide OR d. Nickel Metal |
1.04 kg/kg content in export product
1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product |
-:43:-
| e. Antimony Trioxide
f. Chromium Oxide g. Tin Oxide h. Manganese Oxide OR h. Manganese Metal OR h. Manganese carbonate i. Polyvinyl Alcohol j. Aluminium Poly Acrylate OR J. Decyl Amine Acetate K. Glass Frit – Silver Oxide |
1.08 kg/kg content in export product
1.08 kg/kg content in export product 1.08 kg/kg content in export product 1.08 kg/kg content in export product 1.10 kg/kg content in export product 1.08 kg/kg content in export product 3.56 gm/KV 3.85 gm/KV 3.85 gm/KV 2.83 gm/KV |
-:44:-
| C1919 | Brake lining for Motor Vehicles with Aramid and NBR | 1 kg | 1. Nitrile Rubber
2. Brass Chips 3. Aramid Pulp 4. Resin (relevant) 5. Cellulose / Mineral / Glass Fibre 6. Fellite 7. Pottassium Titanate 8. Zinc Oxide 9. Rubber Accelerator |
1.05 kg/kg content in the export product
1.02 kg/kg content in the export product 1.05 kg/kg content in the export product 1.05 kg/kg content in the export product 1.05 kg/kg content in the export product 1.05 kg/kg content in the export product 1.05 kg/kg content in the export product 1.05 kg/kg content in the export product Restricted to 2% of the weight of the Nitrate Rubber |
-:45:-
| C1920 | Telephone Cables of different pair and Dia U/G BSW Cable, Not elsewhere specified | 1 kg | 1. Copper in the form of CC Rods / Wire / Bars EC Grade
2. HDPE Compound 3. Filling Jelly 4. Flooding Jelly 5. Poly Co Polymer 6. Aluminium Foil Stock 7. LDPE Compound |
1.01 kg/kg content in the export product
1.05 kg/kg content in the export product 1.01 kg/kg content in the export product 1.01 kg/kg content in the export product 1.02 kg/kg content in the export product 1.02 kg/kg content in the export product 1.05 kg/kg content in the export product |
-:46:-
| C1921 | Polyurethane Type Air Filters | 1. Filter Paper
2. Polyol 3. ISO CYANATE 4. Perforated and Expanded Cold Rolled Steel Sheet 5. Hot Melt Polyamide 6. PP mold Release Agent 7. Unit Box 8. Multi Carton (5Ply) |
1.02 kg/kg content in export product
1.02 kg/kg content in export product in the ratio of 70:30 1.02 kg/kg content in export product |The two |altogether be |restricted up |to 2% of the |FOB value |Will be |allowed as |per packing |policy |
|
| C1922 | Plastic Air Filters | 1 kg | 1. Filter Paper
2. Polypropylene 3. Rubber Gasket |
1.03 kg/kg content in export product
1.03 kg/kg content in export product On Net to net basis |
-:47:-
| 4. Mold Release Agent
5. Unit Box 6. Multi Carton |
To be restricted upto 2% of the FOB value
|to be allowed |as per |packing |policy |
|||
| C1923 | REVA electrically operated vehicle (four wheeler) | 1 No. | 1. Batteries
2. Electronic Speed Controler 3. Solenoid 4. Passenger Car Tyre 5. DC brushless Battery Fan 6. Electric DC Motor 7. Plastic Sheets ABS / PMMA (poly Methyl metha-acrylate 8. Plastic Sheets (Raw material) ABS 9. Soft touch (ABS) Acrylonitrile Butadiene styrene 10. Permanent Magnet DC Motors 11. Relays 12. Watering System for batteries 13. Primaire D’Adherence |
Net to net
Net to net Net to net Net to net Net to net Net to net 1.10 kg/kg content in the export product 1.10 kg/kg content in the export product 1.10 kg/kg content in the export product Net to net Net to net Net to net |
-:48:-
| 14. Hardener for 52872
15. Vernis Soft Feel Mat 16. Hardener 17. Back Assembly (climate control seat) 18. Cushion Assembly (climate control seat) 19. Controller (climate control seat) |
|To be |allowed up to |2% of FOB |value
Net to tnet Net to net Net to net |
|||
| 20. Controller Interface Cable
21. Controller Power Cable 22. CD Player with Speakers 23. Relays for AC 24. Relays for Heaters 25. Alloy Wheels 26. AC Condensor Fan 27. Heater pad for Batteries 28. Charging Plug Male 29. Charging Plug Female 30. Battery Inter connects 31. Main Plug 32. Battery Harness 33. Charger Parts (Anne-2) 34. DC-DC Converter Parts (Annex-3) 35. A/C Controller Parts (Annex-4) 36. Modular System with micro siren |
Net to net
Net to net Net to net Net to net Net to net Net to net Net to net Net to net Net to net Net to net Net to net Net to net Net to net Net to net Net to net Net to net Net to net |
-:49:-
|
|
37. Central unit (electronic part of central locking)
38. Modular system (electronic part of central locking) 39. Steel Tube round 40. Steel Tube Square 41. Steel Sheet 42. Fasteners 43. Flange 44. Brackets 45. Weldment |
Net to net
Net to net 1.02 kg/kg content in the export product 1.02 kg/kg content in the export product 1.04 kg/kg content in the export product Net to net Net to net Net to net Net to net |
-:50:-
Annexure “D” to the
Public Notice No. 23
Dated: 10/09/2003
PLASTICS PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| H-532 | Flame Retardant High Impact Polystyrene (With MFI<6) | 1 MT | 1. Styrene Monomer
2. Polybutadiene Rubber 3. Mineral Oil 4. Flame Retardant Additive 5. Antimony Trioxide 6. Titanium Dioxide/ Pigment/ Relevant Colour Master Batch |
0.770 MT
0.071 MT 0.018 MT 0.140 MT 0.046 MT 0.020 MT |
| H-533 | Flame Retardant High Impact Polystyrene (With MFI>6) | 1 MT | 1. Styrene Monomer
2. Polybutadiene Rubber 3. Mineral Oil 4. Styrene Butadiene Copolymer 5. Flame Retardant Additive 6. Antimony Trioxide 7. Titanium Dioxide/ Pigment/ Relevant Colour Master Batch |
0.714 MT
0.066 MT 0.017 MT 0.082 MT 0.123 MT 0.041 MT 0.020 MT |
| H-534 | Toughened Polystyrene (S.B. Copolymer) | 1 MT | 1. Styrene Monomer
2. Mineral Oil 3. Styrene Butadiene Copolymer |
0.371 MT
0.006 MT 0.663 MT |
| H-535 | Coloured High Impact Polystyrene | 1 MT | 1. Styrene Monomer
2. Mineral Oil 3. Styrene Butadiene Copolymer 4. Titanium Dioxide/ Pigment/ Relevant Colour Master Batch |
0.942 MT
0.087 MT 0.022 MT 0.025 MT |
-:51:-
Annexure “E” to the
Public Notice No. 23
Dated: 10/09/2003
TEXTILE PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| J355 | Cotton Rope made of Cotton yarn Coloured / Dyed | 1 kg | 1. Cotton Yarn Coloured Dyed | 1.02 kg/kg content in export product |
