Public Notice No. 72 (RE-2001)/1997-2002, issued on 1st March 2002, announces amendments to the Export and Import Policy 1997-2002 under Paragraph 4.11. The notice introduces new entries for engineering and food products, with specific modifications to the Handbook of Procedures, Vol. 2, 1997-2002. Notably, the textile sector is impacted by changes such as the export of children’s snow suits for ages up to three years, with an allowance for 1.40 square meters of fabric as lining per unit. Additionally, viscose filament yarn twisted or cabled, used in exports, is granted an import allowance of 1.005 kg per kilogram of content in the export product. These amendments aim to provide clearer guidelines and promote trade in these product categories.
GOVERNMENT OF INDIA
MINISTRY OF COMMERCE & INDUSTRY
DEPARTMENT OF COMMERCE
PUBLIC NOTICE NO. 72 (RE-2001)/1997-2002
NEW DELHI : DATED : 01/03/2002.
Attention is invited to Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time.
2. In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended.
3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure “A” to this Public Notice shall be made.
4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-
CHEMICALS AND ALLIED PRODUCTS
After the existing entry at Sr.No.A-2822, the new entries at Sr.No.A-2823 to A-2834 shall be added as per Annexure ”B” to this Public Notice.
ENGINEERING PRODUCTS
After the existing entry at Sr.No.C-1743, the new entries at Sr.No.C-1744 to C-1764 shall be added as per Annexure ”C” to this Public Notice.
-:2:-
FOOD PRODUCTS
After the existing entry at Sr.No.E-105, the new entry at Sr.No.E-106 shall be added as per Annexure ”D” to this Public Notice.
TEXTILE PRODUCTS
After the existing entry at Sr.No.J-350, the new entries at Sr.NoSr.J-351 to J-352 shall be added as per Annexure ”E” to this Public Notice.
This issues in public interest.
(N.L. LAKHANPAL)
DIRECTOR GENERAL OF FOREIGN TRADE
(B.GANGAR)
DIRECTOR GENERAL OF FOREIGN TRADE
FOR DIRECTOR GENERAL OF FOREIGN TRADE
-:3:-
Annexure “A” to the
Public Notice No. 72
Dated: 01/03/2002
AMENDMENTS/CORRECTIONS
| Sr.
No. |
Page
No. |
Reference | Amendments/Corrections |
| 1 | 2 | 3 | 4 |
| 1. | 4 | Chemicals & Allied Products
Sr.No.A1037 (amended vide public Notice No. 40 Dated:01.10.2001) |
The description of export item shall be amended to read as under:-
“Glass Fibre Reinforced Plastic product containing 70% Polyester Resin and 30% Glass Fibre by weight (Tank, Vessels, Gratings, Scrubbers, Pipes and Ducting & their fittings etc.” |
| 2. | 145 | Chemicals & Allied Products
Sr.No.A1043 |
After import item at Sr. No. 4, the following import items (with quantity) shall be added:-
“5. Furnace Oil/Fuel Oil – 1.22 Litre 6. High Speed Diesel – 0.112 Litre 7. Light Diesel Oil – 1.28 Litre” |
| 3. | 146 | Chemicals & Allied Products
Sr.No.A1047 |
After import item at Sr. No. 11, the following import items (with quantity) shall be added:-
“12. Furnace Oil/Fuel Oil – 1.01 Litre 13. High Speed Diesel – 0.09 Litre 14. Light Diesel Oil – 1.32 Litre” |
| 4. | 165 | Chemicals & Allied Products
Sr.No.A1297 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1297 | Dihexyl Phthalate | 1 kg | Phthalic Anhydride
n-Hexanol |
0.448 kg
0.640 kg |
-:4:-
| 5. | 237 | Chemicals & Allied Products
Sr.No.A1767 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1767 | Alkyl Phenolic Resin | 1 kg | Para Tertiary Butyl Phenol
Para Formaldehyde (Purity 91 + 1%) |
0.833 kg
0.240 kg |
| 6. | 243 | Chemicals & Allied Products
Sr.No.A1808 |
In the description of export product, the trade name “NAPERAK 6015” shall be deleted. |
| 7. | 243 | Chemicals & Allied Products
Sr.No.A1810 |
In the description of export product, the trade name “NAPERAK 6019” shall be deleted. |
| 8. | 243 | Chemicals & Allied Products
Sr.No.A1812 |
In the description of export product, the trade name “NAPERAK 6053” shall be deleted. |
| 9. | 244 | Chemicals & Allied Products
Sr.No.A1813 |
In the description of export product, the trade name “NAPERAK 6003” shall be deleted. |
| 10. | 251 | Chemicals & Allied Products
Sr.No.A1862 |
In the description of export product, the trade name “NAPERAK 5706” shall be deleted. |
| 11. | 251 | Chemicals & Allied Products
Sr.No.A1864 |
In the description of export product, the trade name “NAPERAK 3116” shall be deleted. |
-:5:-
| 12. | 251 | Chemicals & Allied Products
Sr.No.A1866 |
In the description of export product, the trade name “NAPERAK 3303” shall be deleted. |
| 13. | 251 | Chemicals & Allied Products
Sr.No.A1867 |
In the description of export product, the trade name “NAPERAK 3951” shall be deleted. |
| 14. | 251 | Chemicals & Allied Products
Sr.No.A1868 |
In the description of export product, the trade name “NAPERAK 2403” shall be deleted. |
| 15. | 267 | Chemicals & Allied Products
Sr.No.A2001 |
The existing quantity of 1.300 kg of import item at Sr. No. 1 shall be amended to read as under:-
“0.965 kg” |
| 16. | 321 | Chemicals & Allied Products
Sr.No.A2387 |
After the description of import item at Sr. No.4 the following import item (with quantity) shall be added:-
“5. n-Heptane – 1.59 kg” |
| 17. | 16 | Chemicals & Allied Products
Sr.No.A2482 (amended vide Public Notice No. 38 Dated:01/11/2000 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2482 | Zinc Dust containing minimum 99.50% Zinc | 1 kg | Zinc Ingot | 1.01 kg |
-:6:-
| 18. | 6 | Chemicals & Allied Products
Sr.No.A2640 (amended vide Public Notice No. 30 Dated:01/08/2001 |
In the description of export product, the word and figures “containing 0.0135 SBR” shall be deleted. |
| 19. | 47 | Chemicals & Allied Products
Sr.No.A2647 (Amended vide Public Notice No.04 Dated: 31/03/2001 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2647 | Grease Gun Hoses | 1 Meter | Relevant Thermoplastic High Pressure Hose of relevant Inner/ Outers Diameter | 1.015 Meter |
| 20. | 22 | Chemicals & Allied Products
Sr.No.A2718 (Amended vide Public Notice No. 24 Dated: 02/07/2001) |
The description of import item at Sr. No. 2 shall be corrected (without any change in quantity) to read as under:-
“Di-Isocyanate” |
-:7:-
| 21. | 398 | Electronics Products
Sr.No.B-153 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| B-153 | SOFT FERRITE PART NAMELY THE FOLLOWING.:-
Manganese Zinc Soft Ferrite Parts Magnesium Zinc Soft Ferrite parts |
1 kg
1 kg |
Ferrit Oxide
Manganese Oxide (Manganous/ Manganic) Zinc Oxide Poly Vinyl Alcohol (PVA) Polyethylene Glycol Additives Ferrit Oxide Zinc Oxide Poly Vinyl Alcohol (PVA) Magnesium Oxide Polyethylene Glycol Additives |
0.8800 kg.
0.3040 kg 0.1158 kg 0.0150 kg 0.0050 kg 0.0132 kg 0.752 kg 0.150 kg 0.015 kg 0.111 kg 0.005 kg 0.103 kg |
| Nickel Zinc Soft Ferrite PartSr. | 1 kg | Ferrit Oxide
Zinc Oxide Poly Vinyl Alcohol (PVA) Cobalt Oxide Nickel Oxide Additives |
0.7808 kg
0.1240 kg 0.0150 kg 0.0650 kg 0.2987 kg 0.1210 kg |
-:8:-
| 22. | 417 | Engineering Products
Sr.No.C22 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C22 | Table, Kitchen & other house hold articles made of aluminium including anodized with or without handle irrespective of what material handle are made of (other than those covered under SION at Sr. No. C-1749) | 1 kg | Aluminium Scrap
Aluminium Ingot Aluminium Sheet/ Coils Aluminium Circle |
1.15 kg/kg content of Aluminium in export product
1.12 kg/kg content of Aluminium in export product 1.10 kg/kg content of Aluminium in export product 1.03 kg/kg content of Aluminium in export product |
| Note: In case of anodised Export product the purity of inputs allowed i.e. Ingot Sheet/Coils/ Circles shall be 99.7% and above. | ||||
| 23. | Engineering Products
Sr.No.C149 |
The description of export item shall be amended to read as under:-
“9 KV 5 KA Conventional/ Gapless Surge Arrester Distribution type with Mounting Brackets and Isolator (Disconnector Device)” |
-:9:-
| In the description of import item at Sr. No.2, the following alternative import items (with quantities) shall be added:-
“OR a) Cobalt oxide with Assay – 1.05 kg/kg content of more content in than 72% the export product b) Bismuth Oxide with – 1.05 kg/kg Assay content content in 99.5% or more the export product c) Chromium Oxide with – 1.05 kg/kg Assay content more than content in 99% the export product d) Manganese Oxide with – 1.05 kg/kg Assay content more than content in 99.5% or more the export product” |
| 24. | 438 | Engineering Products
Sr.No.C169 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C169 | Complete Ceiling fan with Metal Blades 48” | 1 No. | Super Enamelled Copper Wire/Copper Rod
CRNGO Sheet/Coils OR Electric Stamping made out of CRNGO Sheet |
360 gmSr.
3400 gms 1400 gms |
-:10:-
| Aluminium Alloy
Kraft Paper Polypropylene M.SR. Sheet Ball Bearing/Bush Aluminium Sheet/ CRCA Sheet/ Aluminium Alloy (for Blade of Fan) (only the relevant item used in the export to be allowed) |
1100 gmSr.
1000 gmSr. 150 gmSr. 250 gms 2 NoSr. 1.05 kg/kg content in the export product |
| 25. | 438 – 439 | Engineering Products
Sr.No.C171 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C171 | Complete Ceiling fan with Metal Blades 56” | 1 No. | Super Enamelled Copper Wire/Copper Rod
CRNGO Sheet/Coils OR Electric Stamping made out of CRNGO Sheet Aluminium Alloy Kraft Paper Polypropylene M.SR. Sheet Ball Bearing/Bush Capaciotor |
380 gmSr.
3600 gms 1500 gmSr. 1200 gmSr. 1000 gms 150 gmSr. 250 gms 2 NoSr. Net to net |
-:11:-
| Aluminium Sheet/CRCA Sheet/Aluminium Alloy (for Blad of Fan) (only the relevant item used in the export to be allowed) | 1.05 kg/kg content in the export product | |||
| Note: Norms covered by Sr. No. 168 to 171 above will also be applicable to shipment of product in SKD condition provided the exporter submit necessary proof of export of complete ceiling fans covered by various shipping bills at the time of closures of DEEC Book/Redemption of Bond/LUT. | ||||
| 26. | 451 | Engineering Product
Sr.No.C206 |
The description of import item at Sr. No. 1 shall be amended (without any change in quantity) to read as under:-
“Copper Rod/ Copper Wire Rod (EC Grade)” |
| 27. | 463 | Engineering Product
Sr.No.C252 |
The description of import item at Sr. No. 1 shall be amended (without any change in quantity) to read as under:-
“Continuous cast copper Rods/Copper Wire Rods/ Bars/Cathodes (EC Grade)” |
| 28. | 500 | Engineering Products
Sr.No.C375 |
The following note No. 2 shall be added below this entry:-
“Note: 2. If the Export product is painted, in addition relevant paint may be allowed to the extent of 4% of the FOB value” |
-:12:-
| 29. | 568 | Engineering Products
Sr.No.C549 |
The following note No. 1 shall be added below this entry:-
“Note: 1. If the Export product is painted, in addition relevant paint may be allowed to the extent of 4% of the FOB value” |
| 30. | 571 | Engineering Products
Sr.No.C570 |
The following note No. 1 shall be added below this entry:-
“Note: 1. If the Export product is painted, in addition relevant paint may be allowed to the extent of 4% of the FOB value” |
| 31. | 4 | Engineering Products
Sr.No.C630 (As amended vide Public Notice No. 25 Dated: 01/08/2000 |
The quantity of import item at Sr. No. 1 shall be amended to read as under:-
“1.07 kg/kg content in the export product” |
| 32. | 590 | Engineering Products
Sr.No.C707 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C707 | M.SR. Washer Galvanised/Painted | 1 kg | CRCA/ HR Sheets/ Coils/ Strips/ Defective/ Secondary
Zinc OR Paint |
1.50 kg
0.04 kg 4% of the FOB value |
-:13:-
| 33. | 34 | Engineering Products
Sr.No.C1574 (Amended vide Public Notice No. 38 Dated: 01/11/2000 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C1574 | Bicycle Tube valve mainly made of Brass | 1 kg | Brass Scrap | 1.20 kg per kg content of brass in the export product |
| 34. | 14 | Engineering Products
Sr.No.C1580 (corrected vide Public Notice No. 49 Dated:01/01/2001) |
The description of the import item at Sr. No.2, shall be amended (without any change in quantity) by adding the following words:- “and/or Lumps” |
| 35. | 29, 53, 68 & 69 | Engineering Products
Sr.No.C-1590, C-1603, C-1604, C1646, C-1647 (corrected vide Public Notice No. 53 Dated: 01/02/2001 and Public Notice No. 04 Dated: 31/03/2001) |
The SION entries at Sr. NoSr. C-1590, C-1603, C-1604, C-1646 and C-1647 of Engineering Group shall be deleted and restored at Sr. NoSr. B-248 to B-252 of Electronics Group (Category B). |
| 36. | 14 | Food Products
Sr.No.E- 79 (amended vide Public Notice No. 36 Dated:03/10/2000) |
The description of import item at Sr. No. 8 shall be amended (without any change in quantity) to read as under:-
“Biocides, Fungicides and Insecticides (relevant to Sugar Industry only)” |
-:14:-
| 37. | 880 | Plastic Products
Sr.No.H- 116 |
The description of export item shall be amended to read as under:-
“Hessian Bags with LDPE/ HDPE/ PP Liner/ Lamination and with/ without Zipper/ Handle” |
| 38. | 883 | Plastic Products
Sr.No.H- 132 |
The description of export item shall be amended to read as under:-
“Jute Bags with HDPE Liner/ Lamination and with/ without Zipper/ Handle” |
| 39. | 883 | Plastic Products
Sr.No.H- 133 |
The description of export item shall be amended to read as under:-
“Jute Bags with LDPE Liner/ Lamination and with/ without Zipper/ Handle” |
| 40. | 924 | Plastic Products
Sr.No.H-310 |
The description of export item shall be amended to read as under:-
“Sterilized Disposable/ Auto-Disable Syringes with or without Needles (1ml, 2ml/3ml, 5ml, 10ml, 20ml)” |
| 41. | 12 & 11 | Plastic Products
Sr.No.H-440 (Amended vide Public Notice No.45 Dated 1.11.2001 & Public Notice No. 58 Dated: 01/01/2002 |
The quantity of import item at Sr. No. 3 shall be corrected to read as under:-
“0.007 No.” |
-:15:-
| 42. | 14 | Textile Products
Sr.No.J-96 (amended vide Public Notice No. 45 Dated:01/11/2001 |
The description of import item at Sr. No. 2 (with quantity) shall be amended to read as under:-
“2. Vat Indigo Blue Dye – 0.05 kg OR Vat (other than Indigo)/ – 0.015 kgs Reactive/sulphur/ Pigment dyes” The following Note below this entry shall be added:- “Note:1.Vat Indigo blue Dye shall be allowed for import only when the export item is Indigo blue dyed denim cloth.” |
| 43. | 983 | Textile Products
Sr.No.J-99 |
After the import item at Sr. No. 1, the following import item (with quantity) shall be added:-
“2. Fuel for power generation HSD – 1.15 litres OR Furnace Oil – 1 litre The following Notes below this entry shall be added:- “Note:1.HSD and Furnace Oil shall be allowed only under AU condition. |
| Note:2.The above norms for fuel are applicable only to those units having facilities for captive power generation using HSD/Furnace Oil”. |
-:16:-
| 44. | 13 | Textile Products
Sr.No.J-100 (amended vide Public Notice No. 24 Dated:02/07/2001) |
The description of import item at Sr. No. 2, shall be amended (with quantity) to read as under:-
“2. Fuel for power generation HSD – 1.50 litres OR Furnace Oil – 1.20 litre. The following Notes below this entry shall be added:- “Note:1.HSD and Furnace Oil shall be allowed only under AU condition. Note:2.The above norms for fuel are applicable only to those units having facilities for captive power generation using HSD/Furnace Oil”. |
| 45. | 983 | Textile Products
Sr.No.J-101 |
After the import item at Sr. No. 1, the following import item (with quantity) shall be added:-
“2. Fuel for power generation HSD – 1.74 litres OR Furnace Oil – 1.45 litreSr. The following Notes below this entry shall be added:- “Note:1.HSD and Furnace Oil shall be allowed only under AU condition. Note:2.The above norms for fuel are applicable only to those units having facilities for captive power generation using HSD/Furnace Oil”. |
-:17:-
Annexure “B” to the
Public Notice No.72
Dated: 01/03/2002
CHEMICALS AND ALLIED PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed | ||
| A2823 | Diphtheria and Tetanus Vaccine Adsorbed (Pediatric) 10 Doses vials | 1 Lakh Vials (10 Lakh Doses) | L-Cysteine Mono-Hydrochloride
Maltose L-Cystine Aluminium Chloride Tri Sodium Orthophosphate Thiomersal N-Z Case TT L-Tyrosine Sodium Acetate Trihydrate Glass Vials Rubber Stoppers Aluminium Caps/ Seals Cold Chain Monitor Cards Shipping Indicators |
0.05250 kg
5.25000 kg 0.04368 kg 5.25000 kg 8.19000 kg 0.05250 kg 3.49960 kg 0.08700 kg 0.71400 kg 115.000 Nos 110.000 Nos 110.000 Nos 350 Nos 350 Nos |
||
| A2824 | Hessian Cloth with LDPE/ HDPE/ PP Liner | 1 kg weight of LDPE/ HDPE/ PP Liner excluding weight of Hessian | Relevant LDPE/ HDPE/ PP Granules for Liner | 1.02 kg/kg content of relevant item in the export product | ||
-:18:-
| A2825 | Sulpho C Acid (2-Naphthylamine 4,6,8 Trisulfonic Acid) | 1 kg | Crude Naphthalene
Soda Ash |
1.330 kg
2.070 kgs |
|||
| A2826 | 9-Anthracene Methanol | 1 kg | 9-Anthraldehyde | 1.16 kg | |||
| A2827 | Para Sulfo Benzoic Acid Potassium Salt | 1 kg | Caustic Potash
Dimethyl Formamide Potassium Permanganate |
0.259 kg
0.930 kg 1.96 kg |
|||
| A2828 | Di (2-Ethyl Hexyl) Peroxydicarbonate, 40% | 1 kg | 2 Ethyl Hexyl Chloroformate
Hydrogen Peroxide 50% |
0.470 kg
0.083 kg |
|||
| A2829 | Di-Ethylene Glycol Mono Butyl Ether | 1 kg | n-Butanol
Ethylene Oxide |
0.466 kg
0.554 kg |
|||
| A2830 | Ethylene Glycol Mono Butyl Ether | 1 kg | n-Butanol
Ethylene Oxide |
0.640 kg
0.380 kg |
|||
| A2831 | Cationic Polyester Partially Oriented Yarn (DMT Route) | 1 kg | DMT
MEG Cationic Salt Titanium Dioxide Antimony Trioxide Manganese Acetate Tri Ethylene Glycol Santotherm Spin Finish Oil Corrugated Boxes Paper Cones Fuel |
1.000 kg
0.370 kg 0.020 kg 0.0037 kg 0.00055 kg 0.00038 kg 0.009 kg 0.0020 kg 0.0101 kg Net to net Net to net 0.87 KL |
|||
-:19:-
| A2832 | Esbiothrin (2 methyl Furan Route) | 1 kg | 2-Methyl Furan
Dimethyl Formamide Phosphorus Oxy Chloride Magnesium Turnings Allyl Chloride Toluene Tetra Hydro Furan Ethylene Dichloride L-Allethrilone Glycine Ethyl Ester Hydrochloride 2,5 Dimethyl 2, 4 Hexadiene L-Base (D-threo-(1-P Nitro Phenyl 2 Amino Propane 1, 3 Diol) Thionyl chloride Pyridine Methanol Di Isopropyl Ether Sodium Nitrite Caustic Soda (100% basis) |
0.337 kg
0.278 kg 0.664 kg 0.087 kg 0.277 kg 0.480 kg 0.293 kg 1.868 kg 0.297 kg 1.950 kg 2.150 kgs 0.431 kg 0.474 kg 0.295 kg 0.444 kg 1.084 kg 0.958 kg 2.840 kg |
| A2833 | Glass Vials (4ml, 5ml, 10ml size) | 1 kg | Glass tube of Assorted Size | 1.12 kg |
| A2834 | Alkyl Phenol Resin | 1 kg | Para Tertiary Butyl Phenol
Para Formaldehyde (Purity 91+1%) |
0.833 kg
0.240 kg |
-:20:-
Annexure “C” to the
Public Notice No. 72
Dated: 01/03/2002
ENGINEERING PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty Allowed |
| C1744 | Hydraulic Jacking Beam Model SJ 15 | 1 NoSr. (110 kgs) | Non-Alloy Steel Plate/Flat
G.P. non Alloy Steel Sheet Non Alloy Steel Bars/Rods Non Alloy Steel Tube Bearing FAG 6200.2 ZR Screw/Nut/ Bolt/ Washer Springs Mechanical Seals Hose Assembly with end fittings PVC/ Rubber Grips & Pads |
51 kg
5 kg 14.8 kg 40.6 kg 8 NoSr. 1.9 kg 11 NoSr. 12 NoSr. 1 No. 9 NoSr. |
| C1745 | Hermetically Sealed Compressor for air-conditioners using R 22 refrigerant gas having following cooling capacity:- 4790 K Cal/hr. | 1 No. | 1. COMPONENT
Cluster Moulding Cluster Terminals Heat Shrink Caps Upper housing Lower Housing Hermetic Terminals Pump Kit consisting of the following:- Crank case Crank Shaft Piston |
1 No.
3 NoSr. 5. NoSr. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 2 No. |
-:21:-
| Connecting Rod
Valve Plate Assembly Cylinder Head Outboard Bearing Hermetic Motor Protector Non-Shrink Tube 2. RAW MATERIAL CRNGO Steel Sheet Electrolytic Copper Rod/Wire Music Wire 4. Refrigeration Oil |
2 NoSr.
1 No. 1 No. 1 No. 1 No. 8 No. 11.58 kg 1.92 kg 0.0545 kg 0.958 ltrSr. |
|||
| C1746 | Hermetically Sealed Compressor for air –
Conditioners using R 22 refrigerant gas having following cooling capacity:- 5214 K Cal/hr. |
1 No. | 1. COMPONENT
Cluster Moulding Cluster Terminals Heat Shrink Caps Upper housing Lower Housing Hermetic Terminals Pump Kit consisting of the following:- Crank case Crank Shaft Piston Connecting Rod Valve Plate Assembly Cylinder Head Outboard Bearing Hermetic Motor Protector Non-Shrink Tube |
1 No.
3 NoSr. 5 NoSr. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 2 NoSr. 2 NoSr. 1 No. 1 No. 1 No. 1 No. 8 No. |
-:22:-
| 2. RAW MATERIAL
1. CRNGO Steel Sheet 2. Electrolytic Copper Rod/Wire 3. Music Wire 4. Refrigeration Oil |
12.62 kg
2.05 kg 0.0593 kg 1.042 ltrSr. |
|||
| C1747 | Hermetically Sealed Compressor for air-
Conditioners using R 22 refrigerant gas having following cooling capacity:- 6350 K Cal/hr. |
1 No. | 1. COMPONENT
Cluster Moulding Cluster Terminals Heat Shrink Caps Upper Housing Lower Housing Hermetic Terminals Pump Kit consisting of the following:- a) Crank case Crank Shaft Piston Connecting Rod Valve Plate Assembly Cylinder Head Outboard Bearing Hermetic Motor Protector Non-Shrink Tube 2. RAW MATERIAL CRNGO Steel Sheet Electrolytic Copper Rod/Wire Music Wire Refrigeration Oil |
1 No.
3 NoSr. 5. NoSr. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 2 NoSr. 2 NoSr. 1 No. 1 No. 1 No. 1 No. 8 No. 15.36 kg 2.05 kg 0.0722 kg 1.27 ltrs |
-:23:-
| C1748 | Hermetically Sealed Compressor for air –
Conditioners using R 22 refrigerant gas having cooling capacity:- 3400 K Cal/hr. |
1 No. | 1. COMPONENT
Cluster Moulding Cluster Terminals Heat Shrink Caps Upper Housing Lower Housing Hermetic Terminals Pump Kit consisting of the following:- a) Crank case Crank Shaft Piston Connecting Rod Valve Plate Assembly Cylinder Head Outboard Bearing Hermetic Motor Protector Non-Shrink Tube 2. RAW MATERIAL CRNGO Steel Sheet Electrolytic Copper Rod/Wire Music Wire Refrigeration Oil |
1 No.
3 NoSr. 5. NoSr. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 2 NoSr. 2 NoSr. 1 No. 1 No. 1 No. 1 No. 8 No. 11.02 kg 1.7 kg 0.0562 kg 1.02 ltrSr. |
| C1749 | Table, Kitchen & other house hold articles made of aluminium including anodized with or without handle irrespective of what material handle are made of rectangular/ Square with straight edgeSr. | 1 kg | Aluminium Scrap
Aluminium Ingot |
1.10 kg/kg content of Aluminium in export product
1.07 kg/kg content of Aluminium in export product |
-:24:-
| Aluminium Sheet/ Coils | 1.05 kg/kg content of Aluminium in export product | ||||||
| Note: 1. In case of anodised Export product the purity of inputs allowed i.e. Ingot Sheet/Coils/ Circles shall be 99.7% and above.
Note: 2. For other shapes refer C-22 |
|||||||
| C1750 | Vaporizer made of Aluminum | 1 kg | Aluminium ingot | 1.05 kg | |||
| C1751 | Tyre curing press of all sizes | 1 No. | Non-Alloy HR Plates
Components required for the export product |
1.10 kg/kg content in export product
Net to net basis with accounta-bility clause |
|||
| Note: 1. Specification/capacity & weight of capital goods along with number is to be indicated in the application.
Note: 2. Net weight of component & sub-assemblies to be imported to be procured indigeneously to be given in application. Note: 3. Net weight of components & items to be manufactured from each raw material to be imported is to be given in the application. Note: 4. Weight of component & items to be manufactured from each indigenous material in export product is to be given in the application. Note: 5. Weight of component and the item given as per notes 2 to 4 should tally with net weight of Capital Goods to be exported. Note: 6. Total weight of each raw material is to be calculated on the basis of net weight given as per note 3 above plus wastage as permitted in the norms for the particular raw material. |
|||||||
-:25:-
| C1752 | Dry Cell-R6 PVC/ Paper jacket 16.45 gm/pc | 1 No. | Manganese Dioxide (Electrolytic)
Acetylene Black Zinc (Battery Grade) Graphite Powder LDPE Tin Plate Electrolytic |
3.92 gms
0.66 gms 5.665 gms 0.002 gms 0.395 gms 0.50 gms |
| C1753 | Dry Cell-R6 Metal Jacket 18.45 gm/pc. | 1 No. | manganese Dioxide (Electrolytic)
Acetylene Black Zinc (Battery Grade) Graphite Powder LDPE Tin Plate Electrolytic Mercury Free Separator |
4.55 gms
0.672 gms 5.005 gms 0.002 gms 0.233 gms For Bottom 0.5 gm PMS 5.0 gms 18 Sq.CmSr. |
| C1754 | Dry Cell – R14 Metal Jacket 43 gm/pc. | 1 No. | Manganese Dioxide (Electrolytic)
Acetylene Black Zinc (Battery Grade) Graphite Powder LDPE Tin Plate Electrolytic Natural Manganese Ore (Powder) |
2.60 gms
1.674 gms 8.652 gms 0.002 gms 0.8110 gms For Top 0.875 gms For Bottom 0.875 gms PMS 7.053 gms 4.146 gms |
-:26:-
| C1755 | Dry Cell – R20 Metal Jacket 85 gm/pc. | 1 No. | Manganese Dioxide (Electrolytic)
Acetylene Black Zinc (Battery Grade) Graphite Powder LDPE Tin Plate Electrolytic Natural Manganese Ore (Powder) |
7.31 gms
2.92 gms 13.853 gms 0.004 gms 1.26 gms For Top 1.46 gms For Bottom 1.57 gms PMS 11.62 gms 16.44 gms |
| C1756 | Dry Cell – R20 Metal Jacket (National) 85.59 gm/pc. | 1 No. | Manganese Dioxide (Electrolytic)
Acetylene Black Zinc (Battery Grade) Graphite Powder LDPE Tin Plate Electrolytic Natural Manganese Ore (Powder) |
7.31 gms
2.92 gms 13.853 gms 0.004 gms 1.26 gms For Top 1.46 gms For Bottom 1.57 gms PMS 11.62 gms 16.44 gms |
| C1757 | Dry Cell – R20 Paper Jacket 76.675 gm/pc. | 1 No. | Manganese Dioxide (Electrolytic)
Acetylene Black Zinc (Battery Grade) Graphite Powder LDPE Natural Manganese Ore (Powder) |
1.173 gms
2.679 gms 13.853 gms 0.004 gms 1.26 gms 11.726 gms |
-:27:-
| C1758 | CNC/ AMS Vertical Machining Centre with APC | 1 No. | Ball Screw
Super precision Bearing SIMO Drive with Motor OR CNC System SI Top Power Supply Smart Flux Coupling Encoder Switches LM Guides Disc. Spring |
3 NoSr.
4 NoSr. 1 Set 1 No. 4 NoSr. 1 No. 4 NoSr. 1 No. 1 No. |
| Note: Import of components shall be allowed on net to net basis with accountability clause. | ||||
| C1759 | Brown Fused Aluminium Oxide Grain | 1 MT | Brown Fused Aluminium Oxide Crude/ Lump Purity 95% Minimum | 1.1 MT |
| Note: Purity of export product should be more than the purity of imported input allowed. | ||||
| C1760 | Power Take-offs/ Clutches | 1 No. | Bearing Taper Roller TPR 32212
Bearing Ball SR DP Groove 6206ZZ Non-Asbestos Friction Plate 5878 Floating Plate Housing Sliding Sleeve HB Plate Bearing Retainer Hand Lever Operating Yoke Adj. Yoke |
2 NoSr.
1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. |
-:28:-
| Driving Ring
Toggle Lever Operating Shaft Clutch Shaft Hub Retainer Fitting – 60410026 Fitting – 60410027 Lock BRG Retainer Lever Link |
1 No.
4 NoSr. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 8 NoSr. |
|||
| C1761 | CRCA Circles of Steel | 1 MT | Hot Rolled Non-alloy Steel Strips/Wide Coils
Cold rolling Mill Rolls Rolling Oil Pickling Oil Steel Strapping VCI/Rusto Paper |
1.30 MT
1.45 kg 0.40 kg 0.526 kg As per packing policy As per packing policy |
| C1762 | Agricultural Sprinkler made of Brass | 1 No. | Brass Scrap | 1.07 kg/kg content of the brass in the export product |
| C1763 | Coils for Quartz Analogue Wrist Watch of Caliber 2030/2035 | 1000 noSr. (weight – 235 gms) | Horological Steel Strip Cold rolled
Enamelled magnet Copper Wire Printed Circuit Board (un populated) |
210 gmSr.
158 gmSr. 1000 NoSr. |
-:29:-
| C1764 | Polyamide-Imide Enamel Overcoated Enamelled Copper Wire | 1 kg | Copper Wire Rod/ Cathodes
Polyamide-Imide enamel |
1.01 kg per kg content in the export product
1.01 kg per kg content in the export product |
-:30:-
Annexure “D” to the
Public Notice No. 72
Dated: 01/03/2002
FOOD PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty Allowed |
| E-106 | Raw Sugar | 1 MT | Bleaching Agent: (Silica / Lime / Sulphur Dioxide)
Chemicals for Clarification: (soda Ash/ magnesium dioxide/ Polyphosphate/ E.D.T.A./ Bleaching Agent) Chemicals for Purification: (Phosphoric Acid/ Soda Ash/ polyphosphate/ bleaching Agent) Floculeants: (Chemfloc/ Mafloc) Sequestering Chemicals: (Inorganic Salts/ Polyphosphates) Antifoaming Agents: (Antifoaming Chemicals) |
9 kg
2 kg 10 kg 2 kg 3 kg 4 kg |
-:31:-
| Mills Sanitation Agents: (Bleaching Earth/ Antimold Agent)
Biocides, Fungicides and Insecticides (Biocides and Addombin) {relevant to Sugar industry only} Viscossity reducing Agents: (Viscosity reducing Chemicals) Boiler Treatment Chemicals/Resins: (Maxtreat Sodium Nitrate/ Citric Acid/ tartaric Acid) Cleaning Agents: (Sodium Loryal Sulphate/ Cleaning chemicals) Packing Material : (HDPE/LDP/PP) |
4 kg
10 kg 7 kg 9 kg 6 kg 4 kg |
–:32:-
Annexure “E” to the
Public Notice No. 72
Dated: 01/03/2002
TEXTILE PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty Allowed |
| J351 | Children Snow suit (for age group upto 3 years) | 1 No. | Fabric to be used
Fabric as lining |
sq.mtr.
1.40 sq.mtr. |
| J352 | Viscose Filament Yarn Twisted/ Cabled | 1 kg | Viscose Filament Yarn | 1.005 kg/kg content in the export product |
