(TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY

PART-1-SECTION-1)

GOVERNMENT OF INDIA

MINISTRY OF COMMERCE & INDUSTRY

DEPARTMENT OF COMMERCE

PUBLIC NOTICE NO. 77 (RE- 03)/ 2002-2007

NEW DELHI : DATED : 26/08/2004.

Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.

2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of Foreign Trade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.

3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure “A” to this Public Notice shall be made.

4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-

CHEMICALS AND ALLIED PRODUCTS

After the existing entry at Sr. No.A-3332, new entries at Sr. No. A-3333 to A-3378 shall be added as per Annexure ”B” to this Public Notice.

-:2:-

ENGINEERING PRODUCTS

After the existing entry at Sr.No.C-1967, new entry at Sr.No.C-1968 to C-1975 shall be added as per Annexure “C” to this Public Notice.

TEXTILE PRODUCTS

After the existing entry at Sr.No.J-359, new entry at Sr.No.J-360 to J-361 shall be added as per Annexure “E” to this Public Notice.

5. This issues in public interest.

Sd/-

( GOPAL K. PILLAI )

DIRECTOR GENERAL OF FOREIGN TRADE

Sd/-

(SBS Reddy)

Jt.. DIRECTOR GENERAL OF FOREIGN TRADE

(F.No.01/87/171/00002/AM04/DES-VIII)

-:3:-

Annexure “A” to the

Public Notice No. 77

Dated: 26/08/2004

AMENDMENTS/CORRECTIONS

Sr.

No.

Page

No.

Reference Amendments/Corrections
1 2 3 4
1. 164 Chemical & Allied Product

Sr.No.1316

The norm covered by this entry shall be substituted by the following:-
         
Sr.No. Export Item Qty. Import Item Qty. Allowed
A1316 Diethylamine (minimum Purity 98%) 1 kg 1. Denatured Alcohol (Purity not more than 98%)

2. Nickel Catalyst

1.311 kg

0.0017 kg

2. 4 Chemical & Allied Product

Sr.No.A1377 (amended vide Public Notice No.15 Dated:07/07/2003)

The norm covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
A1377 Linear Alkyl Benzene 1 kg A. For HF Process

1. N-Paraffin

2. Benzene

3. Dehydrogenation Catalyst For Pacol process (DeH07) DeH-11, DEH-101 & DeH-201, DHC-2 & NDC-4 & the like

4. HF Acid

5. KOH

6. Fuel Oil/LSWR

7. Heat Transfer Oil

0.950 kg.

0.400 kg.

0.00035 kg.

0.002 kg.

0.002 kg.

0.55 kg.

0.0045 kg

-:4:-

      OR

 

B. For Detal Process

1. N-Paraffin

2. Benzene

3. Dehydrogenation Catalyst For Pacol process (DeH-7), DeH-11, DEH-101 & DeH-201, DHC-2 & NDC-4 & the like

4. Detal Catalyst

5. PEP Adsorbent

6. Define Catalyst

7. Normal Pentane

8. Fuel Oil/LSWR

9. Heat Transfer Oil

0.950 kg.

0.400 kg.

0.00035 kg.

0.00081 kg.

0.00017 kg

0.00004 kg.

0.0043 kg.

0.55 kg.

0.0045 kg.

3. 169 Chemical & Allied Product

Sr.No.A1379

The norm covered by this entry shall be deleted.
4. 177 Chemical & Allied Product

Sr.No.A1475

After the description of import item at Sr. No.7, the following additional import item (with quantity) shall be added:-

“8. Furnace Oil (F.O) – 0.1020 kg

/Heavy Fuel”

5. 276 Chemical & Allied Product

Sr.No.A2156

The norm covered by this entry shall be deleted.
6. 330 Chemical & Allied Product

Sr.No.A2585

The description of import item at Sr. No. 1, (with quantity) shall be amended to read as under:-

“1. Glyoxal 40% – 3.00 kg

OR

Methyl 5-Nitro – 1.74 kg

Imidazole”

-:5:-

7. 16 – 17 Chemical & Allied Product

Sr.No.A3130 (amended vide Public Notice No.54 Dated:03/01/2003)

The description of import item at Sr. No. 1(c), (without any change in quantity) shall be amended to read as under:-

“Cobalt oxide / Copper Oxide/ Relevant Pigment for Ceramics”

8. 17 – 18 Chemical & Allied Product

Sr.No.A3131 (amended vide Public Notice No.54 Dated:03/01/2003)

The description of import item at Sr. No. 2b(1), (with quantity) shall be amended to read as under:-

“2b(1). Fibre Glass Net – Net 5%

of relevant wastage

specification”

9. 18 – 19 Chemical & Allied Product

Sr.No.A3132 (amended vide Public Notice No.54 Dated:03/01/2003)

The description of import item at Sr. No. 2b, (with quantity) shall be amended to read as under:-

“2b. GLUE – 13.46 MT”

10. 23 Chemical & Allied Product

Sr.No.A3237 (Notified vide Public Notice No.70 Dated:29.06.2004)

The description of export item shall be amended to read as under:-

“Offset Printing Ink – Cyan for Printing Ink (40+/-1% Pigment and 34+/-1% Solid Resin)” instead of “Offset Printing Ink – Cyan for Springing Ink (40+/-1% Pigment and 34+/-1% Solid Resin)”

11. 1 GENERAL NOTES FOR ALL EXPORT PRODUCT GROUPS (amended vide Public Notice No. 13 Dated:20/05/2002) The General Notes for All Export Product Groups at Sr. No. 11 shall be deleted.

-:6:-

12. 631 Engineering Product

Sr.No.C641

The norm covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed

 

C641 Fabricated Steel Hardware/Structure/Articles not elsewhere specified made out of Non Alloy/Alloy/Stainless Steel Plates/Sheets/ Wide Coils/Strips 1 kg 1. Non Alloy/Alloy/ Stainless Steel Plates/Sheets/Wide Coils/Strips

2. Zinc Ingot (to be allowed only in case the product is Galvanised)

1.05 Kg./Kg. content in export product

1.04 Kg./Kg. content in export product

13. 644 Engineering Product

Sr.No.C722

The norm covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
C722 M.S. Bucket Handle Duly plated with nickel or Copper or Zinc/Powder Paint Coated 1 kg 1. M.S. Wire Rod

2. Nickel

OR

Zinc

OR

Copper

OR

Powder Paint

1.05 kg.

0.97% of weight of Steel to be Nickel Plated

OR

0.97% of weight of Steel to be Zinc plated

OR

0.97% of weight of Steel to be Copper plated

OR

0.97% of weight of Steel to be Powder Painted

-:7:-

14. 746 Engineering Product

Sr.No.C1214

The quantity of import item at Sr. No. 1, shall be amended to read as under:-

1.20 kg/kg content of brass in the export product

15. 8 Engineering Product

Sr.No.C1376 (amended vide Public Notice No. 31 dated:05/11/2003)

The description of export item shall be amended to read as under:-

“Machined cast bushings of Automotive & Non-Automotive application, Machined cast components for valves internals including casing, impellers, discs, plugs, yoke sleeves, Yoke bushes, seals, spacers and bearing, Hexagonal nuts, earthing clamps, spindle, stems, wedges, seat rings etc. manufactured out of Silicon brass/ Silicon bronze/high tensile brass or with copper and alloying elements, like Zinc varying from 10-35% and other elements like Aluminium, Manganese, Silicon, Iron Lead each not exceeding 5% conforming to ASTM B584-C87500, C87600, C87610/ASTM B371”

16. 9 Engineering Product

Sr.No.C1377 (amended vide Public Notice No. 31 dated:05/11/2003)

The description of export item shall be amended to read as under:-

“Machined cast bushings of Automotive & Non-Automotive application, Machined cast components for valves internals including casing, impellers, discs, plugs, yoke sleeves, Yoke bushes, seals, spacers and bearing, Hexagonal nuts, earthing clamps, spindle, stems, wedges, seat rings etc. manufactured out of Aluminium Bronze or with copper and alloying elements like Aluminium 8 to 11% and Iron 1.5 to 3.5 conforming to BS 1400-AB1/ASTM B 148-C95200, C95300/DIN 1714 GCUAL 10 FE”

-:8:-

17. 789 Engineering Product

Sr.No.C1420

The norm covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
C1420 Fine Cobalt Powder Grain size 0.5 – 2 Micron 1 kg 1. Cobalt Granules/ Cobalt Briquettes/ Cobalt Cathode.

Or,

Cobalt Chloride

Solution containing

Cobalt Metal

1.04 Kg.

1.04 Kg. of Cobalt contained in Cobalt Chloride Solution

18. 840 Engineering Product

Sr.No.C1640

The norm covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
C1640 Fiberglass /Synthetic Filter Bags of different sizes with Snap Ring made of Stainless Steel AISI 301 and other fittings 1 No. 1. Fiberglass / Synthetic Filter Cloth of relevant GSM

2. Fiberglass / Synthetic Sewing Thread

3. Stainless Steel Strip AISI 301

1.02 Sq. Yard/Sq. Yard of cloth in export product

1.01 kg./kg. Content in export product

1.02 kg./kg. Content in export product

19. 10 Engineering Product

Sr.No.C1647 (amended vide Public Notice No.27 Dated:01/08/2002)

The description of import item (in Raw material) at Sr. No. 15, (with quantity) shall be amended to read as under:-

15(a) Relevant Welding – 2% of the

Electrodes/ Welding weight of

Wires steel to be

Welded

(b) Relevant Flux – Equal to

the weight

of welding

wires”

-:9:-

20. 868 Engineering Product

Sr.No.C1734

1. The description of export product shall be amended to read as under:-

“Non Cast Hardware Fittings made of Non Alloy/Alloy/Stainless Steel Rod”

2. The description of import item at Sal. No. 1, (without any change in quantity) shall be amended to read as under:-

“Non Alloy/Alloy/Stainless Steel Rod of relevant grade”

21. 46 & 11 Engineering Product

Sr.No.C1884 (amended vide Public Notice No. 03

Dated: 31.03.2003 & Public Notice No. 20 Dated 01/08/2003)

The norm covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
C1884 Seamless Steel Casing and Tubing. 1 kg 1. Alloy/Non Alloy Steel Billets/Rounds of relevant grade.

2. Thread Protectors

3. Thread Inserts/Cut-Off Blades

1.25 Kg

Net to net

Upto 2% of FOB

22. 16 & 478 of HBP (Vol-II) PART-II GENERAL NOTES FOR ENGINEERING PRODUCTS (amended vide Public Notice No.06 Dated:08.05.2003) After the General not for Engineering products at SR. No. 5, the following General note shall be added:-

“Note:6. Where the manufacturing process commences from raw material stage the export product may be allowed to be exported in CKD/SKD condition.”

-:10:-

23. 36 – 37 Leather Product

Sr.No.G-7 (amended vide Public Notice No.70 Dated:29.06.2004)

The description of import item at Sr. No. 12(c), (without any change in quantity) shall be corrected to read as under:-

“For Vegetable – Chrome Combination Tanned Leather (Semi-Chrome tanned Leather)”

24. 38 – 39 Leather Product

Sr.No.G-46 (amended vide Public Notice No.70 Dated:29.06.2004)

The description of import item at Sr. No. 12(c), (without any change in quantity) shall be corrected to read as under:-

“For Vegetable – Chrome Combination Tanned Leather (Semi-Chrome tanned Leather)”

25. 9 & 11 Plastics Product

Sr.No.H-45 (Notified vide Public Notice No.61 Dated:03/02/2003) & amended vide Public Notice No. 10 Dated:30.05.2003)

After import item at Sr. No. 1, (with quantity) shall be amended to read as under:-

“2. HSD/LDO/Furnace Oil – 0.512 litres

(For Power generation)”

26. 1084 – 1085 Textile Product

Sr.No.J-92

The foot note at Sr. No. 2 shall be amended to read as under:-

“Note:2. The above norms for fuels are applicable to units having spinning, weaving and processing activities or only weaving and processing activities as the case may be”

-:11:-

Annexure “B” to the

Public Notice No. 77

Dated: 26/08/2004

CHEMICALS AND ALLIED PRODUCTS

Sr.No. Export Item Qty. Import Item Qty. Allowed
A3379 2, Acetyl Naphthalene (Beta Methyl Naphthyl Ketone) 1 kg 1. Refined Naphthalene

2. Acetyl Chloride

3. Methanol

4. Aluminium Chloride Anhydrous

1.890 kg

1.520 kg

1.355 kg

2.622 kg

A3380 Hydrotreating-cum-Desulphurisation Catalyst Type: G-1 Catalyst Containing: Zinc oxide 85 +/-3% and Molybdenum trioxide 3.5+/-0.3% 1 kg 1. Zinc Metal

2. Molybdenum trioxide

0.694 kg.

0.035 kg.

A3381 ABS Resin / Granules (Injection Moulding / Sheeting Grade) 1 MT 1. Styrene

2. Aqcrylonitrile

3. Butadiene

4. Oleic Acid or Distilled Fatty Acid

5. Teritary Dodecyl Mercaptan/ Normal Dodecyl Mercaptan

6. Potassium Persulphate

7. Disprosin / Rosin

8. Ethylene Bis-stearamide

9. Antioxidant (OBP/Sumilizer/ DTDTDP/DBP/ TNPP/BHT/ Irgonox-1076

10. Pigment/ Titanium Dioxide/Relevant Colour Master Batch

11. Stearic Acid

12. Palmitic Acid

639 kg

271 kg

190 kg

21 kg

7 kg

5 kg

25 kg

25 kg

31 kg

20 kg

3 kg

2 kg

-:12:-

A3382 5 Aceto Acetyl Amino Benximidazolone

OR

(5-Aceto Acetyl Amino Benximidazolone-2)

1 kg 1. Acetic Acid

2. 5 Amino Benzimidozonlene

3. Triethyl Phosphate

4. Methanol

5. DABCO Crystalline (1,4, Diazo Bicyclo (2,2,2) – Octane

1.512 kg

0.800 kg

0.005 kg

0.700 kg

0.0015 kg

A3383 Transformer Oil (conforming to IEC 296 class I and class II / IEC60296) 1 Kg 1. TOBS (Viscosity 6 to 20 cst at 40ºc) 1.02 Kg
A3384 Transformer Oil high flash (Flashpoint 250º c min.) 1 Kg 1. Bright Stock Base Oil (Viscosity 30 ± 3cst at 100ºc)

2. Base Oil (Viscosity 110 ± 20cst at 40ºc)

0.11 Kg

0.91 Kg

A3385 Light Liquid Paraffin/ Light white oil / Light Mineral Oil B.P./U.S.P 1 Kg 1. Base Oil (Viscosity at 40ºc 40 cst max.)

2. Isopropyl Alcohol

1.06 Kg

0.05 Kg

A3386 Liquid paraffin / Heavy white oil / Heavy mineral oil BP/USP (Other than covered in SION A-3385) 1 Kg 1. Base Oil (Viscosity at 40ºc 120 cst max.)

2. Isopropyl Alcohol

1.08 Kg

0.05 Kg

A3387 Light Liquid paraffin/Light white oil / Light mineral oil 1 Kg 1. Base Oil (Viscosity at 40ºc 40 cst max.) 1.02 Kg
             

-:13:-

A3388 Liquid paraffin/Heavy white oil /Heavy mineral oil (Other than covered under SION A-3387) 1 kg 1. Base Oil (Viscosity at 40ºc 120 cst max.) 1.03 kg

-:14:-

Annexure “C” to the

Public Notice No. 77

Dated: 26/08/2004

ENGINEERING PRODUCTS

Sr.No. Export Item Qty. Import Item Qty. Allowed
C1976 LT/HT Aerial Bunched Cables 1×25 + 25 SQMM 1 KM 1. Aluminium Ingot

2. XLPE Compound

3. Aluminium,

Magnesium

68 Kg.

26 Kg.

68 Kg.

C1977 LT/HT Aerial Bunched Cables 3×25 + 1×25 SQMM 1 KM 1. Aluminium Ingot

2. XLPE Compound

3. Aluminium, Magnesium, Silicon Alloy Ingot.

208 Kg.

80 Kg.

68 Kg.

C1978 LT/HT Aerial Bunched Cables 3×50 + 1×35 SQMM 1 KM 1. 1. Aluminium Ingot

2. XLPE Compound

3. Aluminium, Magnesium, Silicon Alloy Ingot.

383 Kg.

133 Kg.

93 Kg.

C1979 Power Entry Components without wire harness 1 No. 1. Brass Strip

2. Nylon 6 Moulding Powder/Granules

1.30 Kg./Kg. content in export product

1.05 Kg./Kg. content in export product

C1980 Electrical Aluminium Cutout 1 No. 1. Aluminium Alloy Ingots

2. Brass

3. Copper Wire Bar

1.02 Kg./Kg. content in export product

1.05 Kg./Kg. content in export product

1.01 Kg./Kg. content in export product

-:15:-

C1981 Silica Refractory Boards for Tundish / Ladle Lining 1 MT 1. Quartzite / Quartz Powder

2. Bonding Adhesive (Resin/Goulac)

3. Filler (Boric Acid or Borax, Paper / Glass Fiber, Glass and Mineral Wool)

4. Wooden Moulds

1250 kg.

75 kg.

62.5 kg.

0.07 Nos.

C1982 Hydraulic Cylinder for earth moving equipments 1 No. 1. Seal Dust.

2. Packing Rod

3. Bushing

4. O-Ring

5. Ring, Back Up

6. Ring Piston

7. Ring Wear

8. Seal Dust

9. Nylon Nut

10. Nut

11. Bolt

12. Washer

13. Non alloy cold drawn seamless steel tube of relevant grade

14. ERW Steel Tube

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

1.1 Mtr./Mtr. Content in export product

1.01 Mtr. / Mtr. Content in export product

C1983 ERW Steel Pipes / Tubes (Galvanised) ASTM Standard 1 kg 1. Hot rolled Carbon steel sheets / strips / plates / coils other than high carbon steel

2. Zinc (In kgs)

0.9765 kgs.

As per Engg. Table no. 11.

Note : While the quantity of item No. 1 will remain the same for all thickness of the products, the quantity of item 2 will be as per the Engg. Table No. 11.

-:16:-

C1984 ERW Steel Pipes/ Tubes (Galvanised) other than ASTM Standards 1 kg 1. Hot rolled Carbon steel sheets / strips / plates / coils other than high carbon steel

2. Zinc (in kgs)

0.9765 kgs.

As per Engg. Table No. 11

Note : While the quantity of item No. 1 will remain the same for all thickness of the products, the quantity of item 2 will be as per the Engg. Table No. 11.
C1985 Machined components for automotive application namely Sleeve / Bush 1 kg 1. Relevant Continuous Cast Tube of relevant sizes & specification 1.01 kg/kg content in the export product

-:17:-

ENGINEERING TABLE NO. 11

Export Item – ERW Steel Pipes / Tubes (Galvanised)

Sr.

No.

Export Item Standard) Pipe thickness
    1 mm and below Above 1 mm to 2 mm Above 2 mm to 3 mm Above 3 mm to 4 mm Above 4 mm to 5 mm 5 mm and above
1. ASTM 0.14 kg 0.075 kg 0.055 kg 0.04 kg 0.035 kg 0.03 kg
2. Other than ASTM Standard 0.10 kg 0.055 kg 0.04 kg 0.03 kg 0.025 kg 0.02 kg

-:18:-

Annexure “E” to the

Public Notice No. 77

Dated: 26/08/2004

TEXTILE PRODUCTS

Sr.No. Export Item Qty. Import Item Qty. Allowed
J362 Acrylic Grey Yarn (Under Worsted System)   1. Acrylic Fibre/Tow 1.10 Kg./Kg. content in the export product
*****

More Under DGFT

Posted Under

Category : DGFT (3524)
Tags : DGFT Notifications (3466)

Leave a Reply

Your email address will not be published. Required fields are marked *