(TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY PART-1-SECTION-1)
GOVERNMENT OF INDIA
MINISTRY OF COMMERCE & INDUSTRY
DEPARTMENT OF COMMERCE
PUBLIC NOTICE NO. 45(RE-2001)/1997-2002
NEW DELHI : DATED : 01/11/2001.
1. Attention is invited to Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended andParagraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time.
2. In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended.
3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/ corrections at appropriate places as mentioned in Annexure “A” to this Public Notice shall be made.
4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-
CHEMICALS AND ALLIED PRODUCTS
After the existing entry at Sr.No.A-2779, the new entries at Sr.No.A-2780 to A-2789 shall be added as per Annexure ”B” to this Public Notice.
ENGINEERING PRODUCTS
After the existing entry at Sr.No.C-1699, the new entries at Sr.No.C-1700 to C-1710 shall be added as per Annexure ”C” to this Public Notice.
FOOD PRODUCTS
After the existing entry at Sr.No. E-104, the new entry at Sr.No.E-105 shall be added as per Annexure ”D” to this Public Notice.
5. This issues in public interest.
(N.L. LAKHANPAL)
DIRECTOR GENERAL OF FOREIGN TRADE
(B. GANGAR)
DY.DIRECTOR GENERAL OF FOREIGN TRADE
Annexure “A” to the
Public Notice No. 45
Dated: 01/11/2001
AMENDMENTS/CORRECTIONS
| Sr.
No. |
Page
No. |
Reference | Amendments/Corrections |
| 1 | 2 | 3 | 4 |
| 1. | 84 | Chemicals & Allied Products
Sr.No.A591 |
The description of import item at Sr. No. 1, shall be corrected (without any change in quantity) to read as under:-
“Picramic Acid/ Sodium Picramate”. |
| 2. | 162 | Chemicals & Allied Products
Sr.No.A1260 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1260 | Beta Phenyl Ethyl Amine | 1 kg | 1. Benzyl Cyanide
OR i) Benzyl Chloride ii) Sodium Cyanide 2. Isopropyl Alcohol 3. Methanol 4. Neckel Catalyst |
1.200 kg
1.504 kg 0.582 kg 0.400 kg 0.033 kg 0.012 kg |
| 3. | 169 | Chemicals & Allied Products
Sr.No.A1360 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1360 | Hexamethyl Disilazane | 1 kg | 1. a) Hexa Methyl
Disiloxane b) Residual Polymer Mixture/Volatile Cyclic Mixture |
1.49 kg
0.878 kg |
| containing approx.
95% Silicone content OR b) Dimethyl Dichloro Silane OR 1.a)Trimethyl Chloro- silane (TMCS) b)Toluene c) Ammonia Gas |
1.309 kg
1.50 kg 0.10 kg 0.35 kg |
| 4. | 186 | Chemicals & Allied Products
Sr.No.A1539 |
The description of import item at Sr. No.3 shall be amended (without any change in quantity) to read as under:-
“3. Meta Cresol/Meta Para Cresol” |
| 5. | 187 | Chemicals & Allied Products
Sr.No.A1544 |
1. The description of export item shall be amended to read as under:-
“Soya Long Oil Alkyd of 62% Oil length with Solid content 70 + 2% and MTO 30 + 2%” 2. After the import item at Sr. No. 4, the following additional import item (with quantity) shall be added:- “5. Mineral Turpentine – 31.5 kgs” Oil (MTO) |
| 6. | 198 | Chemicals & Allied Products
Sr.No.A1614 |
After the import item at Sr. No. 1 against this entry, the following alternative item (with quantity) shall be added:-
“OR Liquid Bromine – 1.548 kg ” |
| 7. | 240 | Chemicals & Allied Products
Sr.No.A1790 |
After the description of import item at Sr. No.8, the following item (with quantity) shall be added:-
“9. Furnace Oil – 0.8127 Litre” |
| 8. | 248 | Chemicals & Allied Products
Sr.No.A1843 |
1. After the import item at Sr. No. 5 the following additional import item (with quantity) shall be added:-
“6. Furnace Oil – As per Note 2 below” 2. The existing Note below this norm shall be read as Note 1 and after that the following Note shall be added:- “Note: 2.The item No. 6 may be allowed @ 0.546 Ltr./kg of Polyester Texturised Yarn and @ 0.182 Ltr./kg of POY” |
| 9. | 6 | Chemicals & Allied Products
Sr.No.A2090 (as amended vide Public Notice No. 38 Dated: 01/11/2000) |
The quantity of import item at Sr. No. 4 ( i.e. Triethyl Amine) shall be amended to read as under:-
“0.012 kg” |
| 10. | 285 | Chemicals & Allied Products
Sr.No.A2124 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2124 | Zeolite (Sodium Alumina Silicate) | 1 kg | 1. Sodium Silicate
OR i) Silica Sand ii) Soda Ash 2. Aluminium Hydroxide 3. Caustic Soda Flakes |
0.481 kg
0.340 kg 0.220 kg 0.480 kg 0.090 kg |
| 11. | 293 | Chemicals & Allied Products
Sr.No.A2197 |
After the description of import item at Sr. No.3, the following item (with quantity) shall be added:-
“4. Furnace Oil – 0.682 kg” |
| 12. | 17 | Chemicals & Allied Products
Sr.No.A2469 (as amended vide Public Notice No. 32 Dated: 01/09/2000) |
The description of export item shall be corrected to read as under:-
“N-Ethyl 3-Carbomyl 4-Methyl – 6 Hydroxy – 2 Pyridone” |
| 13. | 20 | Chemicals & Allied Products
Sr.No.A2501 (as amended vide Public Notice No.42 Dated: 01/12/2000) |
The existing Note at the end of this entry shall be substituted by the following:-
“Note: In case of different percentage of solution, the quantity of all the inputs may be allowed on pro-rata basis based on the percentage of import content in the export product” |
| 14. | 20 | Chemicals & Allied Products
Sr.No.A2534 (as amended vide Public Notice No.53 Dated: 01/02/2001) |
The description of import items at Sr. Nos. 3, 4, & 6 shall be corrected (without any change in quantities) to read as under:-
“3. Epoxydised Soyabean Oil 4. PVC Stabilizer 6. Calcium Carbonate” |
| 15. | 15 | Chemicals & Allied Products
Sr.No.A2674 (as amended vide Public Notice No. 15 Dated: 01/06/2001) |
The quantity of import item at Sr. No. 4 shall be corrected to read as under:-
“2.434 kgs.” |
| 16. | 18 | Chemicals & Allied Products
Sr.No.A2713 (As amended vide Public Notice No. 24 Dated: 02/07/2001 |
1. The quantity of import item at Sr. No. 10 (i.e. Nylon Fabric for Tyres of relevant GSM) shall be amended to read as under:-
“11 kgs” 2. At the end of this norm the following Note shall be added:- “Note: The weight of each Tyre shall not be more than 580 gms + 2%” |
| 17. | 12 | Chemicals & Allied Products
Sr.No.A2742 (As amended vide Public Notice No. 35 Dated: 03/09/2001 |
The description of export item shall be corrected to read as under:-
“Sodium 2 Ethyl Hexyl Sulfate (Active Matter 40 + 2%)” |
| 18. | 393 | Electronics Products
Sr.No.B-134 |
The description of export item shall be amended to read as under:-
“Quartz Analogue Wrist Watch Movement (including CKD/SKD thereof)” |
| 19. | 463-464 | Engineering Products
Sr.No.C253 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C253 | Plated Wires (Single/Stranded)
a) of Copper or b) of Copper Clad/Coated Steel or c) of Copper Alloy |
1 kg | 1. Base Metal
a) Copper Cathode/ Wire Bar/ C C Rod/Wire Or b) Copper Clad/ Coated Steel Wire Or c) Copper Alloy Wire/ Cathode/ Wire Bar/C C road/Wire 2. Silver 99.9% purity (Ingot, Granuels, Plates or Powder) 3. Wire Drawings Dies, Drawing Lubricants Welding Dies, Tin, Nickel, S-Nickel, Electroplating Salts, Plating Additives |
1.0 kg
1.0 kg 1.0 kg 0.025 kg 2% of the FOB value of export |
| 4. Plastic Bobbins, Plastic Spools, Protective paper / film | As per Packing Policy | |||
| Note: 1. Export product may have Silver, Nickel or Tin Plating on it, but Silver will be allowed only if the export product has Silver plating on it.
Note: 2. Import of base Metal in 1 a), b) or c) will be allowed depending on the base metal used in export product a) or b) or c). |
||||
| 20. | 479 | Engineering Product
Sr.No.C297 |
The description of export item shall be amended to read as under:-
“Stamping (Stator & Rotor sets) for electric Motors” |
| 21. | 606 | Engineering Product
Sr.No.C826 |
The description of export item shall be amended to read as under:-
“Stainless Steel Kitchen Sinks” |
| 22. | 609 | Engineering Products
Sr.No.C844 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C844 | Steel Cops/ Pirn/Bobbin | 1 kg | 1. Hot finished Carbone Steel Seamless Tubes/ Pipes
2. ABS Granuals / resin 3. CRCA Steel Sheet/ Strips |
1.33 kg/kg content in export
1.05 kg/kg content in export 1.15 kg/kg content in export |
| 23. | 621-622 | Engineering Products
Sr.No.C923 to C926 |
At the end of each of these norms the following Note shall be added:-
“Note: This norm shall also be applicable to exports made in “Cloth Roll” form.” |
| 24. | 642 | Engineering Products
Sr.No.C-980 |
After the description of import item at Sr. No. 4 the following additional import item (with quantity) shall be added:-
“5. Atomised Iron Powder – 0.135 kg.” |
| 25. | 10 | Engineering Products
Sr.No.C-1343 (as amended vide Public Notice No. 9 Dated: 01/05/2000) |
The description of import item at Sr. No. 1 shall be amended (without any change in quantity) to read as under:-
“1. Cold Rolled Mild Steel Strips/ Coils/ Sheets” |
| 26. | 734 | Engineering Products
Sr.No.C-1392 |
1. The description of import item at Sr. No. 1 & 3 shall respectively be amended (without any change in quantity) to read as under:-
“1.Continuous cast copper Rod/ cathodes/wire bars (EC Grade) 3. XLPE compound/Cross Linkable LDPE Compound” 2. After the import item at Sr. No. 4(c) the following additional import item at Sr. No. (d) (with quantity) shall be added:- “d). Filler material (Calcium – 0.31 kg Carbonate / Alumina / Kolin)” |
| 27. | 58 | Engineering Products
Sr.No.C-1614 (as amended vide Public Notice No. 04 Dated: 31/03/2001) |
The description of import item at Sr. No. 1 shall be amended (without any change in quantity) to read as under:-
“1. Cold Rolled Mild Steel Strips/ Coils/ Sheets” |
| 28. | 23 | Engineering Products
Sr.No.C1669 (as amended vide Public Notice No. 24 Dated: 02/07/2001) |
The description of import item at Sr. No. 3 shall be corrected (without any change in quantity) to read as under:-
“3. Polypropylene Granules” |
| 29. | 24 | Engineering Products
Sr.No.C1671 (as amended vide Public Notice No. 24 Dated: 02/07/2001) |
The description of export item shall be corrected to read as under:-
“Heat recovery Wheel (1 No. : Heat recovery Wheel incorporating Rotor of 1 Cubic Metre Volume having 1.9 mm flute height)” |
| 30. | 21-22 | Engineering Products
Sr.No.C1685 (as amended vide Public Notice No. 30 Dated: 01/08/2001) |
1. The description of import items at Sr. Nos.4,5,6,10,11,14,16,18,20,21,22, & 23 shall respectively be corrected (without any change in quantity) to read as under:-
“4. Fly Wheel 5. Carbon Steel of relevant grade 6. AG Break Motor 10. Bearing Case 11. Spherical Roller Bearing 14. Surge Tank 16. Front GIB Plate Right Hand 18. GIB Plate Rod |
| 20. Gear End Plate
21. Cylinder 22. Worm Wheel 23. Dual Solenoid Valve” |
| 31. | 9-10 | Plastic Products
Sr.No.H-129 (As amended vide Public Notice No. 32 Dated: 01/09/2000) |
The description of import items at Sr. No. 7, 8 & 9 shall respectively be amended (without any change in quantity) to read as under:-
“7. i)Neocryl XK 70 (Modified Acrylic/ Styrene Co-polymer Emulsion) ii)Poligen MV 250/ Syntran MV 250 (Aqueous, Metal-cross- linked Styrene- acrylate Copolymer Dispersion) 8. i) Poligen WE 1 (Polyethylene based Wax Emulsion) |
| 9. i) Surfinol 104H (Surfactant) (2,4,7,9
Tetramethyl 5 Decyn-4, 7-Diol) (Tetramethyl Decyndiol) ii) Fluorade FC-129 (Surfactant) (Potassium Fluoroalkyl Carboxylate) iii) Rewopol SBDO 75 (Sodium Di-isooctyl Sulfosuccinate)” |
| 32. | 10-11 | Plastic Products
Sr.No.H-130 (As amended vide Public Notice No. 32 Dated: 01/09/2000) |
The description of import items at Sr. No. 7, 8 & 9 shall respectively be amended (without any change in quantity) to read as under:-
“7. i)Neocryl XK 70 (Modified Acrylic/ Styrene Co-polymer Emulsion) ii)Poligen MV 250/ Syntran MV 250 (Aqueous, Metal-cross- linked Styrene- acrylate Copolymer Dispersion) 8. i) Poligen WE 1 (Polyethylene based Wax Emulsion) 9. i) Surfinol 104H (Surfactant) (2,4,7,9 Tetramethyl 5 Decyn-4, 7-Diol) (Tetramethyl Decyndiol) ii) Fluorade FC-129 (Surfactant) (Potassium Fluoroalkyl Carboxylate) iii) Rewopol SBDO 75 (Sodium Di-isooctyl Sulfosuccinate)” |
| 33. | 934-35 | Plastic Products
Sr.No.H-367 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| H-367 | Nylon-6/ Nylon-66 Monofilament Yarn wound on Disposable Bobbins | 1 kg | 1. Relevant Nylon-6/ Nylon-66 Chips
2. Antioxidant 3. Finish Oil |
1.05 kg/kg content in the export product
0.002 kg 0.001 kg |
| 4. Surface Active Agent
5. Polypropylene Granules for Bobbins |
0.001 kg
1.05 kg/kg content in the export product |
|||
| Note: 1. Only the relevant grade of Nylon Chips as contained in the export product shall be allowed.
Note: 2. When export is not on Bobbins, Polypropylene Granules shall not be allowed for import. |
||||
| 34. | 24 | Plastic Products
Sr.No.H-439 (incorporated vide Public Notice No. 15 Dated: 01/06/2001) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| H439 | Aluminum Metalised BOPP Film | 1 kg | 1. BOPP Film
OR Polypropylene Resin/ Granules |
1.10 kg
1.32 kg |
| 2. Aluminium Wire
3. Induction/ Evaporation Boats |
0.0246 kg
0.007 kg |
| 35. | 956 | Textile Products
Sr.No.J-4 |
After the description of import item at Sr. No. 2 the following additional import items (with quantities) shall be added:-
“3. Lubricating agent – 0.05 kg/kg (50% Concentration) 4. Cone centres – net to net basis |
| 36. | 11 | Textile Products
Sr.No.J-92 (as amended vide Public Notice No. 30 Dated: 01/08/2001) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| J-92 | Cotton fabric – dyed with/without elaston/lycra/ spandex yarn | 1 kg | 1. Cotton Yarn
OR Raw cotton for carded counts of yarn of 40s & below OR Raw cotton for combed counts of yarn of 40s and below OR Raw cotton for combed counts of yarn of above 40s 2. Polyvinyl Alcohol (PVA) Sizing Material 3. Sodium Hydrosulphite 4. Vat/reactive sulphur/ pigment dyes (100% strength) 5. Elaston/ lycra/ spandex yarn |
1.10 kg
1.225 kg/kg content in the export product 1.289 kg/kg content in the export product 1.325 kg /kg content in the export product 0.01 kg 0.02 kg 0.015 kg 1.05 kg/kg of materials content in the export product |
| OR
Stretch yarn (mixed yarn containing 95% cotton and 5% of elaston/ lycra/ spandex yarn) 6. Fuel for power generation – Naphtha OR Furnace Oil |
1.05 kg/kg of materials content in the export product
5.50 kg 4.10 ltrs |
|||
| Note: 1. Naphtha and Furnace oil shall be allowed only under AU condition.
Note:2. The above norm for fuel are applicable only to composite units having spinning, weaving and processing activities. Also the said units should have facilities for captive power generation using naphtha/furnace oil. |
||||
| 37. | 12 | Textile Products
Sr.No.J-96 (as amended vide Public Notice No. 40 Dated: 01/10/2001) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| J96 | Cotton indigo blue dyed denim cloth with/ without elaston /lycra/ spandex yarn | kg | 1. Raw Cotton
OR Cotton Yarn 2. Vat Indigo Blue Dye 3. Polyvinyl Alcohol 4. Sodium Hydrosulphite 5. Caustic Soda Flakes |
1.24 kg/kg content in export
1.04 kg/kg content in export 0.05 kg 0.03 kg 0.02 kg 0.02 kg |
| 6. Elaston/ lycra/ spandex
yarn OR Stretch yarn (mixed yarn containing 95% cotton and 5% of elaston/ lycra/ spandex yarn) 7. Polyacrylic Synthetic sizing agent 8. Sulfoesterifiedamide starch/ modified starch 9. Fuel for power generation – Naphtha OR Furnace Oil |
1.05 kg/kg of materials content in the export product
1.05 kg/kg of materials content in the export product 0.016 kg 0.044 kg 1.22 kg 0.92 litres |
|||
| Note: 1. Naphtha and Furnace oil shall be allowed only under AU condition.
Note:2. The above norm for fuel are applicable only to composite units having spinning, weaving and processing activities. Also the said units should have facilities for captive power generation using naphtha/furnace oil. |
||||
| 38. | 1014 | Textile Products
Sr.No.J-308 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| J-308 | Cotton yarn dyed fabrics/made-ups with/without elaston/ lycra/ spandex yarn | 1 kg | 1. Cotton Yarn
2. Polyvinyl Alcohol (PVA) Sizing Materials 3. Sodium Hydro Sulphite 4. Vat/reactive/ sulphur/ pigment dyes (100% strength) |
1.10 kg
0.01 kg 0.02 kg 0.015 kg |
| 5. Elaston/ lycra/ spandex yarn
Or Stretch yarn (mixed yarn containing 95% cotton and 5% of elaston/ lycra/ spandex yarn) 6. Fuel for power generation – Naphtha OR Furnace Oil |
1.05 kg/kg of materials content in the export product
1.05 kg/kg of materials content in the export product 5.50 kg 4.10 litres |
|||
| Note: 1. Naphtha and Furnace Oil shall be allowed only under AU condition.
Note: 2. The above norms for fuel are applicable only to composite units having spinning, weaving and processing activities. Also the said units should have a captive power plant using “Naphtha/Furnace Oil” as fuel. |
||||
Annexure “B” to the
Public Notice No. 45
Dated: 01/11/2001
CHEMICALS AND ALLIED PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed | |||
| A2780 | Ametryn Technical 98% Minimum | 1 kg | 1. Cyanuric Chloride
2. Isopropyl Amine (70%) 3. Mono Ethyl Amine (70%) 4. Toluene 5. Thiourea 6. Dimethyl Sulphate 7. Sodium Hydroxide |
0.900 kg
0.412 kg 0.314 kg 0.245 kg 0.630 kg 0.548 kg 1.174 kg |
|||
| A2781 | Cetyl/ Hexadecyl Trimethyl Ammonium Chloride (25% by weight) | 1 kg | 1. Dimethyl Palmityl Amine | 0.222 kg | |||
| A2782 | Polyethylene Glycol 300 | 1 kg | 1. Diethylene Glycol
2. Potassium Hydroxide 3. Acetic Acid |
0.346 kg
0.001 kg 0.001 kg |
|||
| A2783 | Anisyl Acetone | 1 kg | 1. Phenol | 1.80 kg | |||
| A2784 | Sodium Phenoxy Acetate | 1 kg | 1. Phenol
2. Sodium Bicarbonate 3. Caustic Soda 4. Mono Chloro Acetic Acid 5. Soda Ash |
0.749 kg
0.508 kg 0.350 kg 0.818 kg 0.519 kg |
|||
| A2785 | Sultamicillin Tosylate | 1 kg | 1. 6-APA
2. Ampicillin Trihydrate BP93 3. Potassium Permanganate 4. 2-Ethyl Hexanoic Acid 5. Methyl Aceto Acetate 6. Isopropyl Alcohol 7. Methylene Chloride 8. Di-Methyl Formamide |
2.35 kg
0.96 kg 4.70 kg 1.02 kg 0.70 kg 3.94 kg 3.76 kg 1.18 kg |
|
| A2786 | Potassium Persulfate | 1 kg | 1. Potassium Sulfate | 0.710 kg | |
| A2787 | 2, 4-Dimethyl-3- Pentyloxy Phthalo dinitrile (Alkoxy-Dinitrile) | 1 kg | 1. 2,4 Dimethyl 3 Pentanol
2. Sodium hydride (60% dispersion in Paraffin wax) 3. Tetra Hydro Furan |
0.738 kg
0.254 kg 0.748 Litre |
|
| A2788 | 1,1 Dimethyl-3-Hydroxy-Butyl Peroxy Neo-Heptanoate | 1 kg | 1. Hexylene Glycol
2. Neo Heptanoyl Chloride 3. Hydrogen Peroxide 50% 4. Odourless mineral spirit |
0.336 kg
0.354 kg 0.197 kg 0.435 kg |
|
| A2789 | Lead Stearate Based PVC Stabilizer | 1 kg | 1. Lead Ingots
2. Stearic Acid 3. Relevant Wax |
0.287 kg
0.742 kg Net to net |
|
| Note: The above norms are on 100% Lead Stearate basis. For formulated product containing Lead Streate of different percentage, the requirement of inputs may be worked out on pro-rata basis. | |||||
Annexure “C” to the
Public Notice No. 45
Dated: 01/11/2001
ENGINEERING PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty Allowed |
| C1700 | SRM-9000, (Radio Frequency Assembly) | 1 No | 1. Integrated Circuits (IC)
2. Capacitor: (i) Ceramic (ii) Polyfilm (iii) Tantalum 3. Shieldtray 4. Shield Cover 5. PCBs 6. Connectors 7. Transistors 8. Diodes 9. Resistors (Film) 10. Inductors (Coil) 11. Transformers 12. Thermister 13. Solder Paste |
2600 Nos.
32294 Nos. 900 Nos. 4300 Nos. 100 Nos. 100 Nos. 100400 Nos. 100 Nos. 7100 Nos. 4400 Nos. 42000 Nos. 6895 Nos. 100 Nos. 100 Nos. 2.30 kg. |
| C1701 | Ferro Calcium Cored Wire (Calcium Ferro wire) – Powder Specification to be indicated by the applicant | 1 MT of powder content | 1. Calcium Metal Granules
2. Iron Powder |
1.02 kg/kg content calcium in the export product
1.015 kg/kg content of Iron in the export product |
| C1702 | Silver Alloyed Contacts (containing silver more than 50% and other alloying metals) | 1 kg | 1. Un-wrought silver having purity more than 99.95%
2. Any other relevant alloying metal |
1.03 kg/kg content of silver in the export product
1.03 kg/kg content of relevant alloying metal in the export product |
| C1703 | Lacquered Electrolytic Tin Plate Sheet | 1 kg | 1. Eletrolytic Prime Quality Tinplate of relevant thickness
2. Relevant Lacquer |
1 kg
0.01 kg |
| C1704 | Copper Clad/ Coated Steel Wire: Single or stranded having single wire less than 0.5 mm dia | 1 kg | 1. Copper Clad/ coated Steel wire more than 1 mm diameter
2. Wire Drawing Dies, Drawing Lubricants welding Dies 3. Plastic Bobbins, Plastic Spools, protecting paper/films |
1.02 kg
2% of the FOB value of export As per packing policy |
| C1705 | 1.Resistance Wire: single or stranded or wound on Fibre Glass Core having single wire less than 0.5 mm, using
a) Copper Nickel Alloy(s) Or |
1 kg | 1. (a) Copper Nickel
Alloy Wire 1.00 mm or more diameter or (b) Nickel Chromium Alloy Wire 1.00 mm or more diameter |
1.00 kg
1.00 kg |
| b)Nickel
Chromium Alloy(s) |
2. Alloy Master batches/ Wire Drawings Dies/ Welding Dies Glass Fibre Yarn
3. Plastic Bobbins, Plastic Spools, Protective Paper/ film, Drawing Lubricants |
2% of the FOB value of export
As per Packing Policy |
||
| Note: Import of Alloy in 1 (a) or (b) will be allowed depending on the alloy used in export product (a) or (b) | ||||
| C1706 | Pump set with AC SQ Induction Motor | 1 set | 1. AC SQ Induction motor of relevant wattage & speed | 1 No. |
| C1707 | AA Alkaline Battery (24 gms) | 1 No. | 1. Electrolytic Manganese Dioxide
2. Zinc Powder 3. Potassium Hydroxide Flakes 4. Zinc Oxide Powder 5. Crystalline Graphite Powder/ Synthetic/ Natural Graphite 6. Gallant Powder/ Galling Agent I & II 7. Indium Acetate Powder 8. Sealent/Asphati Piton C/A&P/T 9. Surfactant 10. Paper for Laminated Non-woven Separator / (Main & Bottom) |
10.34 gms
4.12 gms 1.6 gms 0.07 gm 0.628 gm 0.043 gm 0.0024 gm 0.04 gm 0.0002 gm 0.172 gm |
| 11. Nickel Plated Steel Cane
OR Non Alloy Steel Sheet 12. Tin Plated Brass Wire/ Conductor 13. Nylon/Plastic Top 14. Re-inforcing Support Ring OR Non Alloy Steel Sheet 15. Negative Steel Cap OR Non Alloy Steel Sheet 16. PVC Shrink Foil/ Shrink Sreeve 17. PVC Label OR Self-Adhesive PVC Sheet for Label 18. Duplex Board for Packing 19. Carbon Coating/ Carbon Paste 20. NS Clean} 21. Press Oil } |
1 No.
5.9 gms 0.43 gm 1 No. 1 No. 1.26 gms 1 No. 0.42 gms As per packing policy 1 No. 4.2 sq.inch. As per packing Policy 0.026 gms {1% of FOB {if non alloy {steel sheet {for cap, can {& ring are {imported. |
| C1708 | Cooling Tower complete including in completely knocked down condition, with or without accessories and other parts | 1 No. (weight alongwith contents of various inputs to be indicated) | 1. Isopthalic Polyester Resin
2. Glass Roving/ chopped strand mat/surface mat/ woven rovings 3. Polypropylene 4. PVC Fill Sheet OR The following inputs with their quantity for making 1 kg of PVC fill sheet:- a. PVC Resin (Suspension Grade) b. Titanium Dioxide c. Processing Aid |
630 gm/kg GRP Component content in the export product
420 gm/kg GRP component content in the export product 1.05 kg/kg polypropylene component content in the export product 1.05 kg/kg PVC fill sheet component content in the export product 0.945 kg 0.060 kg 0.011 kg |
| d. Impact Modifier
e. Paraffin Wax f. Calcium Citrate g. Lubricant/ Heat Stabiliser h. Filler (Calcium Carbonate) i. Carbon Black 5. Relevant Bearings |
0.014 kg
0.005 kg 0.003 kg 0.038 kg 0.021 kg 0.002 kg Net to net basis with accountability clause |
|||
| C1709 | Suspension Hanger made of stainless steel wire- Grade AISI 302 | 1 kg | 1. Stainless Steel wire Rods – Grade AISI 302 | 1.02 kg/kg content in the export product |
| C1710 | Polyesterimide Enamelled copper Wire/Strip | 1 kg | 1. Copper wire Rod / cathodes
2. Polyestermide enamel |
1.01 kg/kg content in the export product
1.01 kg/kg content in the export product |
Annexure “D” to the
Public Notice No. 45
Dated: 01/11/2001
FOOD PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty Allowed |
| E105 | Pan Masala | 1 kg | 1. Betal Nut
2. Catechu 3. Natural Essential Oil 4. Saffron 5. Cardamom |
740 gms.
90 gms. 15 gms 01 gm 15 gms |
