The Public Notice No. 66 (RE-03)/2002-2007, dated March 4, 2003, from the Ministry of Commerce and Industry outlines amendments to the Export and Import Policy 2002-2007, as well as to the Handbook of Procedures (Vol.1 & 2). These updates pertain to new entries across several sectors. In the Chemicals and Allied Products category, entries A-3141 to A-3149 are added, while in Engineering Products, entries C-1863 to C-1872 are introduced. For Plastic Products, new entries are added from H-525 to H-527, and in Sports Goods, entries I-48 to I-50 are incorporated. Notably, these updates specify the export items and corresponding import quantities for products like inflatable synthetic molded basketballs of various sizes, detailing the materials allowed for importation, such as butyl rubber, synthetic rubber nitrile/SBR, nylon/polyester thread, printing ink, and relevant pigments. These changes are made in line with the provisions of Paragraph 2.4 of the Export and Import Policy, and are intended to streamline procedures and ensure compliance with the evolving trade framework.
GOVERNMENT OF INDIA
MINISTRY OF COMMERCE & INDUSTRY
DEPARTMENT OF COMMERCE
PUBLIC NOTICE NO. 66 (RE- 03)/ 2002-2007
NEW DELHI : DATED : 04/03/2003.
Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.
2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of Foreign Trade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.
3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure “A” to this Public Notice shall be made.
4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-
CHEMICALS AND ALLIED PRODUCTS
After the existing entry at Sr.No.A-3140, new entries at Sr. No. A-3141 to A-3149 shall be added as per Annexure ”B” to this Public Notice.
-:2:-
ENGINEERING PRODUCTS
After the existing entry at Sr.No.C-1862, new entries at Sr.No.C-1863 to C-1872 shall be added as per Annexure ”C” to this Public Notice.
PLASTIC PRODUCTS
After the existing entry at Sr.No.H-524, new entries at Sr. No. H-525 to H-527 shall be added as per Annexure ”D” to this Public Notice.
SPORTS GOODS
After the existing entry at Sr.No.I-47, new entries at Sr. No. I-48 to I-50 shall be added as per Annexure ”E” to this Public Notice.
6. This issues in public interest.
( L. MANSINGH )
DIRECTOR GENERAL OF FOREIGN TRADE
(S.N. DUBEY)
DIRECTOR GENERAL OF FOREIGN TRADE
FOR DIRECTOR GENERAL OF FOREIGN TRADE
-:3:-
Annexure “A” to the
Public Notice No. 66
Dated: 04/03/2003
AMENDMENTS/CORRECTIONS
| Sr.
No. |
Page
No. |
Reference | Amendments/Corrections |
| 1 | 2 | 3 | 4 |
| 1. | 28 | Chemicals & Allied Products
Sr.No.A116 |
The description of import item at Sr. No.2, (with quantity) shall be amended to read as under:-
“2. Peracetic Acid – 1.08 kg OR (i) Acetic Acid – 1.08 kg (ii) Hydrogen Peroxide – 0.456 kg” |
| 2. | 145 | Chemicals & Allied Products
Sr.No.A1051 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1051 | Unpolished / Polished Marble Slab | 1 MT | 1. Steel saw Blades/ Diamond Segment/ Circular saw Blades or blanks
2. Industrial Diamond Beads / Pearls 3. Diamond Abrasives/ Synthetic Abrasives (for polished marble slabs only) 4. Epoxy Resin(for resin coated /filled marble slabs only) |
Upto 4% of FOB value of exports
Upto 2% of FOB Value of exports Upto 3% of FOB Value of exports Upto 2% of FOB Value of exports |
-:4:-
| 3. | 145 | Chemicals & Allied Products
Sr.No.A1052 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1052 | Unpolished / Polished Marble Tiles | 1 MT | 1. Diamond Segment / Diamond Circular saw Blades/Circular saw Blades or blanks
2. Industrial Diamond Beads/Pearls 3. Diamond Abrasives/ Synthetic Abrasives (for polished Marble Tiles only) 4. Epoxy Resin (for Resin coated / filled Marble Tiles only) |
Upto 6% of FOB value of exports
Upto 2% of FOB Value of exports Upto 3% of FOB Value of exports Upto 2% of FOB Value of exports |
| 4. | 211 | Chemicals & Allied Products
Sr.No.A1704 |
1. The description of export item shall be amended to read as under:-
“Relevant Natural Rubber / Synthetic Rubber based Rubber Compounded Sheets/Rings/ Gaskets” 2. Further the description (without any change in quantity) of import item at Sr. No. 1 shall be amended to read as under:- “1. Natural Rubber/ Relevant Synthetic Rubber, namely, SBR (1502/1712), Neoprene, PBR, Nitrile, EPDM Rubber” |
-:5:-
| 5. | 226 | Chemicals & Allied Products
Sr.No.A1764 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1764 | Acrylic Staple Fibre/ Acrylic Tow | 1 kg | 1. Acrylonitrile
2. Methyl Acrylate 3. Sodium Methyl Sulphonate OR Sodium Styrene Sulphonate (SSS) 4. Dimethyl Formamide (DMF) 5. Finish Oil T1 & T2 6. Finish Oil T3 |
0.959 kg
0.086 kg 0.005 kg 0.0041 kg 0.044 kgs 0.002 kg 0.002 kg |
| 6. | 230 | Chemicals & Allied Products
Sr.No.A1795 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1795 | Unpolished/ Polished Granite Monuments | 1 MT | 1. Diamond Segment / Diamond Circular saw Blades / Circular saw Blades or blanks
2. Polishing Abrasives (for Polished Granite monuments only) |
Upto 7% of FOB value of exports
Upto 3% of FOB value of exports |
-:6:-
| 7. | 230 | Chemicals & Allied Products
Sr.No.A1796 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1796 | Unpolished/ Polished Granite Tiles | 1 MT | 1. Diamond Segment / Diamond Circular saw Blades / Circular saw Blades or blanks
2. Polishing Abrasives (only for Polished Granite Tiles) |
Upto 15% of FOB value of exports
Upto 3% of FOB value of exports |
| 8. | 235 | Chemicals & Allied Products
Sr.No.A1833 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1833 | Unpolished/ Polished Granite Slabs | 1 MT | 1. Steel grits or shots / Gangsaw Blades
2. Diamond Segment/ Diamond Circular Saw Blades/ Circular Saw Blades or blanks 3. Polishing Abrasives (for polished granite slabs only) |
Upto 5% of FOB value of exports
Upto 4% of FOB value of exports Upto 3% of FOB value of exports |
| Note: Consumables at Sr. No. 2 are allowed only for slabs cut to regular geometrical shape. | ||||
-:7:-
| 9. | 254 | Chemicals & Allied Products
Sr.No.A1985 |
After the description of import item at Sr. No.5, the following additional import items (with quantity) shall be added:-
6. Sodium Salt of Condensed – 0.002 kg Naphthalene Sulphonic Acid 7. Unsaturated Fatty Acids – 0.0040 kg having C14-18 and C16-18 8. 1,4,-Benzene Diol – 0.0004 kg |
| 10. | 254 | Chemicals & Allied Products
Sr.No.A1986 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1986 | Cut & Dressed Marble Blocks | 1 CBM | 1. Industrial Diamond Beads/ Pearls | Upto 5% of FOB value of exports |
| 11. | 264 | Chemicals & Allied Products
Sr.No.A2069 |
The quantities of import items at Sr. Nos. 1(i) to (vii) shall be amended to read as under:-
“i) Isophthalic Acid – 1.40 kg ii) Iodine – 2.16 kg iii) Methanol – 2.39 kg iv) ISO Propyl Alcohol – 11.00 kg (IPA) v) Nitromethane – 0.48 kg vi) S(-)2-Acetoroy – 0.85 kg Propionyl Chloride vii) Dimethyl Formamide – 0.78 kg (DMF) |
| 12. | 290 | Chemicals & Allied Products
Sr.No.A2263 |
The description of import item at Sr. No.6 (without any change in quantity) shall be amended to read as under:-
“2-Methoxy Propene” |
-:8:-
| 13. | 320 | Chemicals & Allied Products
Sr.No.A2499 |
The description of import item at Sr. No. 3, (without any change in quantity) shall be amended to read as under:-
“PU Resin based on solid contents 35%+/-2% or equivalent quantity proportionate to solid content” |
| 14. | 10 | Chemicals & Allied Products
Sr.No.A3021 (Notified vide Public Notice No. 37 Dated.03.10.2002) |
The description of import item at Sr. No.1 shall be amended to read as under:-
“1. Gum Terpentine containing Alpha Pinene maximum 82.5% instead of Gum Terpentine containing Alpha Pinene 82.5%” |
| 15. | 10 | Chemicals & Allied Products
Sr.No.A3022 (Notified vide Public Notice No. 37 Dated.03.10.2002) |
The description of import item at Sr. No.1 shall be amended to read as under:-
“1. Gum Terpentine containing Alpha Pinene maximum 82.5% instead of Gum Terpentine containing Alpha Pinene 82.5%” |
| 16. | 34 | Chemicals & Allied Products
Sr.No.A3042 (Notified vide Public Notice No. 44 Dated.18.10.2002) |
After the description of import item at Sr. No.1, the following alternative import item (with quantity) shall be added:-
“OR 1. Gum Terpentine Oil – 2.910 kg (containing Alpha Pinene Maximum 82.5%” |
| 17. | 652 | Electronics Products
Sr.No.B-133 |
The description of export item shall be amended to read as under:-
“Quartz analog clock/time pieces with or without Alarm/ Chime/ Pendulum function and Quartz timing mechanism/ movement for the above types of clocks/time pieces (in casing)/SKD condition” |
-:9:-
| 18. | 475 | Electronics Products
Sr.No.B-247 |
The description of import item at Sr. No. 7, (without any change in quantity) shall be corrected to read as under:-
“Alumina Substrate” |
| 19. | 500 | Engineering Product
Sr.No.C155 |
After the description of import item at Sr. No. 4, the following additional import items (with quantity) shall be added:-
“5. Pre Compressed – 0.05 kg per KVA Press Board 6. Press Board – 1 Set (Net to net) Moulding 7. Motorised Off – 1 No (Net to net) Load/on Load Tapchanger |
| 20. | 500 | Engineering Product
Sr.No.C156 |
After the description of import item at Sr. No. 4, the following additional import items (with quantity) shall be added:-
“5. Pre Compressed – 0.08 kg per KVA Press Board 6. Press Board – 1 Set per Job Moulding 7. Motorised Off – 1 No per Job Load/on Load Tapchanger” |
| 21. | 500 | Engineering Product
Sr.No.C157 |
After the description of import item at Sr. No. 4, the following additional import items (with quantity) shall be added:-
“5. Pre Compressed – 0.08 kg per KVA Press Board 6. Press Board – 1 Set per Job Moulding 7. Motorised Off – 1 No per Job Load/on Load Tapchanger |
-:10:-
| 22. | 500 | Engineering Product
Sr.No.C158 |
After the description of import item at Sr. No. 4, the following additional import items (with quantity) shall be added:-
“5. Pre Compressed – 0.05 kg per KVA Press Board 6. Press Board – 1 Set (Net to net) Moulding 7. Motorised Off – 1 No (Net to net) Load/on Load Tapchanger |
| 23. | 501 | Engineering Product
Sr.No.C159 |
After the description of import item at Sr. No. 4, the following additional import items (with quantity) shall be added:-
“5. Pre Compressed – 0.05 kg per KVA Press Board 6. Press Board – 1 Set (Net to net) Moulding 7. Motorised Off – 1 No (Net to net) Load/on Load Tapchanger |
| 24. | 536 | Engineering Product
Sr.No.C283 |
After the description of import item at Sr. No. 4, the following additional import items (with quantity) shall be added:-
“5. Pre Compressed – 0.05 kg per KVA Press Board 6. Press Board – 1 Set (Net to net) Moulding 7. Motorised Off – 1 No (Net to net) Load/on Load Tapchanger |
-:11:-
| 25. | 536 | Engineering Product
Sr.No.C284 |
After the description of import item at Sr. No. 4, the following additional import items (with quantity) shall be added:-
“5. Pre Compressed – 0.08 kg per KVA Press Board 6. Press Board – 1 Set per Job Moulding 7. Motorised Off – 1 No per Job Load/on Load Tapchanger |
| 26. | 537 | Engineering Product
Sr.No.C285 |
After the description of import item at Sr. No. 4, the following additional import items (with quantity) shall be added:-
“5. Pre Compressed – 0.05 kg per Press Board KVA 6. Press Board – 1 Set Moulding (Net to net) 7. Motorised Off – 1 No Load/on Load (Net to net) Tapchanger |
| 27. | 6 | Engineering Product
Sr.No.C313 (vide Public Notice No. 54 Dated:03/01/2003) |
The description of import item at Sr. No. 1, (with quantity) shall be substituted by the following:-
“1. Copper Scrap – 1.05 MT/MT of Copper content OR in the export product Copper Tube/ – 1.03 MT/MT Copper Cathode/ content in the Copper Wire Bar/ export product Billets” |
-:12:-
| 28. | 652 | Engineering Product
Sr.No.C787 |
The note below this entry shall be deleted. |
| 29. | 652 | Engineering Product
Sr.No.C794 |
The description of export item shall be amended to read as under:-
“Seamless Stainless Steel Tubes/Pipes (Hot Finished)” |
| 30. | 680 | Engineering Product
Sr.No.C961 |
The description of export item shall be amended to read as under:-
“Above 175 cc and upto 250 cc motorcycles in CBU/SKD/CKD condition” |
| 31. | 681 | Engineering Product
Sr.No.C963 |
The description of export item shall be amended to read as under:-
“Above 250 cc and upto 500 cc motorcycles in CBU/SKD/CKD condition” |
| 32. | 687 | Engineering Product
Sr.No.C967 |
The description of export item shall be amended to read as under:-
“45 cc to 75 cc motorcycles in CBU/SKD/CKD condition” |
| 33. | 699 | Engineering Product
Sr.No.C1033 |
The description of export item shall be amended to read as under:-
“Three wheeler Drive Away Chassis/Freight carrier powered by Petrol engine of 125 cc to 200 cc in CBU/SKD/CKD condition” |
| 34. | 828 | Engineering Product
Sr.No.C1577 |
The description of import item at Sr. No. 1, (without any change in quantity) shall be amended to read as under:-
“Hardened & Tempered Carbon Steel / Stainless Steel (Martensitic Grade) Strips (in Coils)” |
-:13:-
| 35. | 833 | Engineering Product
Sr.No.C1606 |
1. The description of export item shall be amended to read as under:-
“PFA or FEP or PTFE or PVDF resin lined ball valves with PTFE components like seals, seats, packings etc. in assorted size/weight” 2. the description of import item at Sr.No. 1, (without any change in quantity) shall be amended to read as under:- “PFA or FEP or PTFE or PVDF resin” |
| 36. | 22 | Engineering Product
Sr.No.C1809 (Notified vide Public Notice No.37 Dated:03.10.2002) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed | |
| C1809 | Zinc Builders Hardware Lacquered/ Powder Coated (T/C Pressure Die Cast & Zinc Alloy conforming toZ-3 Specification) | 1 MT | 1. Zinc Ingot (High Grade Special 99.995% purity)
2. Cylinders with or without key(s) 3. Plastic Chips for Plastic component such as washers key holders etc. Polyamide 66/ Nylon 66/ Polyamide6 / Nylon6/ Polyacetal/ Delrin/ Polyoxymethylene |
1.12 kg/kg content of Zinc in export product
Net to net 1.05 kg/kg content in export product |
|
-:14:-
| 4. Machine Screws
5. (a) Berlaclear CT Laquer or Albrilac HB (for Electrophoretic Lacquer) OR Polyester Powder for coating (b)Solvent for Electrophoretic Lacquer (c)Rinse additive for Electrophoretic Lacquer 6. Abrasive Belt 50 mm x 3500 mm for grinding 7. Abrasive Belt 150 mm x 2000 mm for grinding 8. Liquid polishing compound for polishing Rough Finish 9. Trichloro Ethylene for degreasing |
Net to net
cif value limited to 4% of FOB of export | | | | | | | | | | | cif value for |Import item | Nos. 6 to 12 |shall be |limited to |4% of |
-:15:-
| 10.Bar Polishing compound Final Finish (Pre-polishing compound, polishing compound Finishing compound)
11.Polishing Buffs (Pre-polishing Buffs, Polishing Buffs, Finishing Buffs 12.Plastic Vibratory Media |
| FOB value
| of export | | | | | | | | | | |
| 37. | 18 | Engineering Product
Sr.No.C1829 (Notified vide Public Notice No.52 Dated:05.12.2002) |
After the description of import item at Sr. 8, following items (with quantities) shall be added:-
“9. Polypropylene – 1.05 kg/kg content in the export product 10. Relevant Capacitor – 1 No. 11. Relevant Switches – 2 Nos. 12. Kraft Paper – as per packing policy” |
| 38. | 910 | Food Products
Sr.No.E-42 |
The description of export item shall be corrected to read as under:-
“Soyabean Extraction (Soyabean De-oiled cake or meal” |
-:16:-
| 39. | 1025 | Plastic Products
Sr.No.H-349 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| H-349 | Yarn/Tape (Plain/ Twisted) of HDPE/ PP | 1 kg | 1. Relevant HDPE/PP Granules/ Chips | 1.05 kg/kg content in the export product |
| Note : In case of export of coloured items relevant colour master batches shall also be allowed as an additional input @ 0.02 kg/kg weight of Polymers and accordingly, the quantity of relevant Polymer shall be reduced to 1.03 kg./kg content in the export product | ||||
| 40. | 1044- 1045 | Plastic Products
Sr.No.H-461 |
The description of export item shall be amended to read as under:-
“Prepared Adhesives based on Plastics (Two components Laminating Adhesives consisting of A. Adhesive (Polyurethane Solution Containing 60% resin content and 40% solvent) and B. Additive (Poly Isocyanate Solution containing 50% solid and 50% solvent)” |
-:17:-
| 41. | 30 | Plastic Products
Sr.No.H-512 (Notified vide Public Notice No. 46 Dated:06/11/2002) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed | |
| H-512 | PVC Sole for Hawai Chappal (without Filler) | 1 kg | 1. PVC Compound without filler (Hawai Chappal Grade)
OR 1. (a)PVC Resin (Suspension Grade) (b) Dioctyl Phthalate Plasticizer (DOP) (c)Di-iso-Decyl Phthalate Plasticizer (DIDP) (d)Lead Stabilizer |
1.03 kg
0.752 kg 0.280 kg 0.032 kg 0.011 kg |
|
| 42. | 1129- 1130 | Miscellaneous Products
Sr.No.K-61 |
The description of import item at Sr. No. 3, the following alternative import item (with quantity) shall be added:-
“3. Polyester Sewing – 0.441 kg Thread (300D+/-15%) OR Polyester Texturised – 0.441 kg Yarn (300D+/-15%) |
-:18:-
| 43. | 1141 | Miscellaneous Products
Sr.No.K-133 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| K-133 | Dimensional Dressed Granite Blocks | 1 CBM | 1. Diamond Wire
2. Drill Rod |
Upto 2.5% of FOB value of exports
Upto 2.5% of FOB value of exports |
-:19:-
Annexure “B” to the
Public Notice No. 66
Dated: 04/03/2003
CHEMICALS AND ALLIED PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3141 | Epoxy Resin Lapox C-50 (Epoxy Value 5.0-5.25) | 1 kg | 1. Epichlorohydrin
2. Bisphenol-A |
0.600 kgs
0.676 kgs |
| A3142 | Synthetic Tanning agent Blend of sodium salt of polymer of Naphthalene sulfonic acid with formaldehyde and aromatic dibasic salt (Active content 60%) | 1 kg | 1. Crude Naphthalene | 0.229 kg |
| A3143 | Ketorolac Acid | 1 kg | 1. Pyrrole
2. Iso Propenyl Acetate 3. 5% Palladium on Charcoal |
1.48 kg
1.20 kg 0.04 kg |
| A3144 | N-Acetyl-Thiazolidine-4-Carboboxylic Acid | 1 kg | 1. L-Cysteine Hcl Monohydrate | 1.38 kg |
| A3145 | L-Cysteine Free Base | 1 kg | 1. L-Cysteine Hcl Monohydrate | 1.54 kg |
-:20:-
| A3146 | Cefuroxine Acid | 1 kg | 1. 7 Amino Cephalos-poranic Acid (7 ACA)
2. 2 Ethyl Hexanoate 3. Chlorosulphonyl Isocynate 4. Syn-Methoxyimino Furanyl Acetic Acid Ammonium Salt (SMIA) 5. Dimethyl Acetamide 6. Ethyl Acetate/ Acetone 7. Methanol/Methylene 8. Tetrahydrofuran/ Acetonitrile 9. Activated Carbon 10. Phosphorous Pentachloride 11. Sodium Bicarbonate 12. Sodium Hydroxide |
1.10 kg
0.584 kg 0.60 kg 0.88 kg 1.65 kg 4.61 kg 3.23 kg 1.50 kg 0.100 kg 1.00 kg 0.31 kg 0.78 kg |
| A3147 | Secondary Butyl Quinoline | 1 kg | 1. Secondary Butyl Benzene
OR Secondary Butyl Aniline |
1.214 kg
1.150 kg |
-:21:-
| A3148 | Epsilon Acid (1-Hydroxynaphthalene – 3, 8 Disulphonic Acid Dissodium Salt) | 1 kg | 1. Refind Naphthalene
2. Soda Ash |
4.210 kg
2.153 kg |
|
A3149 |
Solvent Red GS (condensed mass of 1-Nitro Anthraquinone & Mono Methyl Amine) | 1 kg | 1. 1-Nitro Anthraquinone | 1.160 kg |
-:22:-
Annexure “C” to the
Public Notice No. 66
Dated: 04/03/2003
ENGINEERING PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C1863 | Graphite Cored Wire | 1 kg | 1. Graphite Powder/ Granules
2. CRCA Steel Strips |
1.015 kg/kg content of powder/ granules in the export product
1.01 kg/kg content of CRCA Steel Strip in the export product |
| C1864 | Automotive Head Lamps, Auxiliary Lamps, Work Lamps, Rubber Body lamps for Motor Vehicles (with or without bulbs) | 1 No. | 1. Relevant CRCA Steel Sheets/Wide Coils/ Strips
2. Halogen/ Automotive Lamps (Bulbs) 3. Head Lamp Glass Lenses 4. Bonding Adhesive / Lacquer Thinner/ Epoxy Powder 5. Relevant Synthetic Rubber 6. Relevant Plastic Powder/ Granules |
1.10 kg/kg content in the export product
Net to net Net to net 4% of FOB value of exports 1.10 kg/kg content in the export product 1.05 kg/kg content in the export product |
-:23:-
| C1865 | Kapton 0.025 mm x 20 mm width x 500 Mtrs length per Roll (Polyamide film in cut length) | 1 Roll | 1. Kaneka PI Film “APICAL” Film 25 AH 1030 mm width x 0.025 mm Thickness (Polyamide film in running length) | 1.03 kg/kg content in the export product |
| C1866 | Cablosam 315.64-05 containing
1. Rhodorsil Resin 4085 – 0.027 kg/ Sq.Mtr. 2. Phlogophite Mica – 0.17 kg/Sq.Mtr. 3. Hiblon Film HH 25-0.028 kg/ Sq.Mtr. 4. Siccatif 9602 – 0.000093 kg./ Sq.Mtr. |
1 Sq. Mtr | 1. Rhodorsil Resin 4085 55 + 5% Solid content
2. Phlogophite Mica 3. Hiblon Film HH 25 4. Siccatif 9602 |
0.05 kg/ Sq. Mtr. content in the export product
0.2125 kg/ Sq. Mtr. content in the export product 0.028 kg/Sq. Mtr. Content in the export product 0.000093 kg/ Sq. Mtr. Content in the export product |
| C1867 | Cablosam 315.64-04 containing
1. Rhodorsil Resin 4085 – 0.027 kg/ Sq.Mtr. 2. Phlogophite Mica – 0.126 kg/Sq.Mtr. 3. Hiblon Film HH 25-0.028 kg/ Sq.Mtr. 4. Siccatif 9602 – 0.000093 kg./ Sq.Mtr. |
1 Sq. Mtr. | 1. Rhodorsil Resin 4085 55 + 5% Solid content
2. Phlogophite Mica 3. Hiblon Film HH 25 4. Siccatif 9602 |
0.05 kg/ Sq. Mtr. Content in the export product
0.1575 kg/ Sq. Mtr. Content in the export product 0.028 kg/Sq. Mtr. Content in the export product 0.000093 kg/ Sq. Mtr. Content in the export product |
-:24:-
| C1868 | Electric Storage Water Heater | 1 No. | 1. Polypropylene for outer body
2. Heating Element 3. Polyol Resin 4. Isocyanate Hardner 5. Thermostate 6. Safety Valve 7. S.S. Sheet/Wide Coil/ Strips of relevant grade 8. Nut & Bolt |
1 kg/kg content in export product
1 No. 0.408 kg/kg of PU Foam contained in the export product 0.612 kg/kg of PU Foam contained in the export product 1 No. 1 No. 1.05 kg/kg content in export product Net to net |
|
| C1869 | Auto Control Cable for seat applications | 1 kg | 1. Galvanised Steel wire of relevant dia
2. Zinc Alloy Ingot (Z-5) 3. HDPE/PP Granules |
1.03 kg/kg content in the export product
1.05 kg/kg content in the export product 1 kg/kg content in the export product |
|
| C1870 | Auto Control Cable ASM Hood Cable | 1 kg | 1. Galvanished Steel wire of relevant dia | 1.03 kg/kg content in the export product | |
-:25:-
| C1871 | Solid State Relays | 1 No. | 1. SCR
2. IC (Opto Coupler) 3. TRIACS 4. Regulator 5. IC-OP AMP 6. MOSFET 7. Transistor 8. Diode/Silicon Rectifier 9. Adhesives 10. Epoxy |
Net to net
Cif value of the items 9 & 10 taken together shall be restricted to 4% of the FOB value of exports |
| C1872 | Empty Recessed fluorescent fitting complete with Aluminium Louver | 1 No. | 1. Relevant Aluminium Sheet | 1.02 kg/kg content in the export product |
-:26:-
Annexure “D” to the
Public Notice No. 66
Dated: 04/03/2003
PLASTIC PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed | |||
| H525 | Polyestyrene Foam Products | 1 kg | 1. Expandable Polystyrene Beads | 1.07 kg/kg content in the export product | |||
| H526 | PVC Compound without Filler (Hawai Chappal Grade) | 1 kg | 1. PVC Resin (Suspension Grade)
2. Dioctyl Phthalate Plasticizer (DOP) 3. Di-Iso-Decyl Phthalate Plasticizer (DIDP) 4. Lead Stabilizer |
0.734 kg
0.274 kg 0.031 kg 0.011 kg |
|||
| H-527 | Polycarbonate Printed Self Adhesive Labels (Square/ rectangular) | 1 kg | 1. Relevant Polycarbonate Film/ Sheet (125 micron to 500 micron)
2. Double Sided Adhesive Tape with Release Paper 3. Screen Printing Ink |
1.20 kg/kg content in the export product
1.20 kg/kg content in the export product 0.03 kg (CIF value restricted to 3% of FOB value of exports) |
|||
-:27:-
Annexure “E” to the
Public Notice No. 66
Dated: 04/03/2003
SPORTS GOODS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| I48 | Inflatable Synthetic (Moulded) Basket Ball of Size-7 | 1 No. | 1. Butyl Rubber
2. Synthetic Rubber Nitrile/ SBR 3. Nylon/ Polyester Thread 4. Printing Ink 5. Relevant Colours / Pigment |
40 gms
70 gms 38 gms 9 gms 4 gms |
| I49 | Inflatable Synthetic (Moulded) Basket Ball of Size-5 | 1 No. | 1. Butyl Rubber
2. Synthetic Rubber Nitrile/ SBR 3. Nylon / Polyester Thread 4. Printing Ink 5. Relevant Colours/ Pigment |
35 gms
60 gms 33 gms 7 gms 3.5 gms |
| I50 | Inflatable Synthetic (Moulded) basket Ball of Size-3 | 1 No. | 1. Butyl Rubber
2. Synthetic Rubber Nitrile/ SBR 3. Nylon/ Polyester Thread 4. Printing Ink 5. Relevant Colours / Pigment |
24 gms
44 gms 25 gms 5 gms 3 gms |
