(TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY
PART-1-SECTION-1)
GOVERNMENT OF INDIA
MINISTRY OF COMMERCE & INDUSTRY
DEPARTMENT OF COMMERCE
PUBLIC NOTICE NO. 15 (RE- 03)/ 2002-2007
NEW DELHI : DATED : 07/07/2003.
Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.
2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of Foreign Trade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.
3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure “A” to this Public Notice shall be made.
4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-
CHEMICALS AND ALLIED PRODUCTS
After the existing entry at Sr.No.A-3187, new entries at Sr. No. A-3188 to A-3211 shall be added as per Annexure ”B” to this Public Notice.
-:2:-
ENGINEERING PRODUCTS
After the existing entry at Sr.No.C-1887, new entries at Sr.No.C-1888 to C-1900 shall be added as per Annexure ”C” to this Public Notice.
5. This issues in public interest.
( L. MANSINGH )
DIRECTOR GENERAL OF FOREIGN TRADE
(S. N. DUBEY)
DIRECTOR GENERAL OF FOREIGN TRADE
FOR DIRECTOR GENERAL OF FOREIGN TRADE
-:3:-
Annexure “A” to the
Public Notice No. 15
Dated: 07/07/2003
AMENDMENTS/CORRECTIONS
| Sr.
No. |
Page
No. |
Reference | Amendments/Corrections |
| 1 | 2 | 3 | 4 |
| 1. | 165 | Chemicals & Allied Products
Sr.No.A1335 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed | |
| A1335 | Ethyl acetate with minimum 90% purity | 1 kg | 1. Acetic Acid Glacial
OR 1(a) Methanol (Purity 99.93% Minimum) 1(b) Rhodium Tri Iodide Catalyst OR 1. Denatured Ethyl Alcohol 2. Denatured Ethyl Alcohol (95%) |
0.716 kg
0.392 kg 0.00036 kg 0.716 kg 0.517 kg |
|
| 2. | 168 | Chemicals & Allied Products
Sr.No.A1376 |
The description of import item at SR. No. 3, (with quantity) shall be amended to read as under:-
“3. Dehydrogenation – 0.00035 kg” Catalyst for Pacol process (DeH-7, DeH-11, DeH-101 & DeH-201, DHC-2 & NDC-4 & the like)” |
-:4:-
| 3. | 168 | Chemicals & Allied Products
Sr.No.A1377 |
The description of import item at SR. No. 3, (with quantity) shall be amended to read as under:-
“3. Dehydrogenation – 0.00035 kg” Catalyst for Pacol process (DeH-7, DeH-11, DeH-101 & DeH-201, DHC-2 & NDC-4 & the like)” |
| 4. | 182 | Chemicals & Allied Products
Sr.No.A1524 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1524 | Triethylamine Min. Purity 98.5% | 1 kg | 1. Denatured Ethyl Alcohol (Purity not more than 98%)
2. Ammonia Anhydrous |
1.421 kg
0.175 kg |
| 5. | 6 | Chemicals & Allied Products
Sr.No.A1677 (Notified vide Public Notice No.03 Dated:31/03/2003) |
The description of import item at Sr. No. 2, (without any change in quantity) shall be amended to read as under:-
“Natural Rubber /PBR/ Relevant Grade of SBR except SBR 1900 Series i.e. HSR” |
| 6. | 240 | Chemicals & Allied Products
Sr.No.A1872 |
The following note below this entry shall be added:-
“Note: In case of export of Copper Insulated Wire EDC Detonators, Tin Ingots shall not be allowed” |
-:5:-
| 7. | 248 | Chemicals & Allied Products
Sr.No.A1939 |
The norm covered by this entry shall be revised by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1939 | Terpeneol | 1kg | 1. Gum Turpentine Oil containing Alpha Pinene 82.5%
OR 1. Alpha Pinene |
1.352 kg
1.04 kg |
| 8. | 343 | Chemicals & Allied Products
Sr.No.A2709 |
The norm covered by this entry shall be corrected as follows:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2709 | PTFE Wax Compound containing 61+/-1% PTFE Wax and 33+/-1% Refined Linseed Oil | 1 kg | 1. PTFE Wax
2. Petroleum Hydro Carbon Solvent (Distillation Range 240-330 Degree Centigrade) 3. Refined Linseed Oil |
0.625 kg
0.056 kg 0.339 kg |
| 9. | 38 | Chemicals & Allied Products
Sr.No.A3169 (Notified vide Public Notice No. 03 Dated:31/03/2003) |
The description of import item at Sr. No. 2, (without any change in quantity) shall be amended to read as under:-
“EPDM/ Chloroprene Rubber except SBR 1900 Series i.e. HSR” |
| 10. | 37-38 | Chemicals & Allied Products
Sr.No.A3170 (Amended vide Public Notice No.03 Dated:31/03/2003) |
The description of export item shall be amended to read as under:-
“Conveyor and Elevator Textile Belting (Heat/ Fire resistant) of Synthetic Rubber / Relevant Grade of SBR” |
-:6:-
| 11. | 376 | GENERAL NOTES FOR ELECTRONICS PRODUCTS | The General note No.1 for Electronics Products before the Electronic Group (SIONs) shall be added:-
“1. For Import of components, in respect of Export product (a) where norms have not been standardized and published and the applicant seeks to import only Components (without any raw material, |
| consumables etc.) or (b) where SION do not provide import of Components or (c) where additional Components in addition to those allowed in norms are sought, the Components as an input may be allowed for import on net-to-net basis, without any wastage, by the Licensing Authority. Import of components sought as Spares shall be governed by the Policy for Spares. In such cases, the import of Components allowed shall be permitted with accountability clause and the type, technical specifications (including part No. if any), etc. of the Components sought for import should conform to those utilized in the manufacturing of the resultant product, which should be reflected in export documents (Shipping Bills) also. A condition to this effect shall be imposed on the licence.” |
| 12. | 386 | Electronics Product
Sr.No.B19 |
After the import item at Sr. No. 9, the following import items (with quantity) shall be added:-
“10. Tin Solder – Upto 1% of FOB value of export 11. Spacer(Pastilha) – Net to net 12. Cut Pieces of – Net to net Polyester Foil (Tira Mylar) OR Polyester Foil – 0.110 kg ” |
-:7:-
| 13. | 401 | Electronics Product
Sr.No.B53 |
After the import item at Sr. No. 1, the following import item (without any change in quantity) shall be amended to read as under:-
“2. Super pure aluminium wire of purity 99.9% or above OR 2. Super pure aluminium wire of purity 99.9% or above AND 2. Zinc Rod of purity 99.9% or above” |
| 14. | 477 | Electronics Product
Sr.No.B256 |
After the import item at Sr. No. 10, the following import items (with quantity) shall be added:-
“11. EMI Shilding Gasket – Net to net OR Soft Shilding Gasket 12. Aluminium Die Cast – Net to net Block 13. Hinge/Latch – Net to net” |
| 15. | 479 | Engineering Product
Sr.No.C2 |
The description of import item at Sr. No. 1(a) (without any change in quantity) shall be amended to read as under:-
“1(a) Aluminium Scrap/ Ingots/ T-bars, Sows” |
| 16. | 509-510 | Engineering Product
Sr.No.C189 |
The description of export item shall be amended to read as under:-
“Electrical Fan with Table Stand/ Wall Bracket” |
-:8:-
| 17. | 558 | Engineering Product
Sr.No.C375 |
The note No. 2, below this entry shall be substituted by the following :-
“Note : If the export product is painted / coated in addition relevant Paint/ coating Powder may be allowed to the extent of 4% of the FOB value” |
| 18. | 559 | Engineering Product
Sr.No.C380 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C380 | Iron Casting (Rough), not elsewhere specified | 1 MT | 1. Major Input comprising of Pig Iron/ CI Scrap/Steel Melting Scrap
2. Low Ash Met. Cocke (Ash: Below 15%) 3. Ferro Alloy comprising of FeSi & FeMn: 4. Other inputs comprising of Fireclay and Fired silica Refractory (Bricks/ Mass), Grinding Wheel and Black Bituminous Paint 5. Packing material (MS Round bars/ Flats/Strips for crating and stuffing) 6. |
1100 kg
110 kg 5 kg CIF value of all these items taken together restricted to 1% of FOB value of exports As per packing Policy |
| Note : Out of the total quantity of the input permitted against item No. 1 above, the quantity of steel melting scrap shall be restricted to 5% of the said total quantity. | ||||
-:9:-
| 19. | 560 | Engineering Product
Sr.No.C383 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C383 | Manhole Cover | 1 MT | 1. Major Input comprising of Pig Iron/ CI Scrap/ Steel Melting Scrap
2. Low Ash Met. Cocke (Ash: Below 15%) 3. Ferro Alloy comprising of FeSi & FeMn: 4. Other inputs comprising of Fireclay and Fired silica Refractory (Bricks/ Mass), Grinding Wheel and Black Bituminous Paint 5. Packing material (MS Round bars/ Flats/ Strips for crating and stuffing) 7. |
1100 kg
110 kg 5 kg CIF value of all these items taken together restricted to 1% of FOB value of exports As per packing Policy |
| Note : Out of the total quantity of the input permitted against item No. 1 above, the quantity of steel melting scrap shall be restricted to 5% of the said total quantity. | ||||
-:10:-
| 20. | 562 | Engineering Product
Sr.No.C392 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C392 | Sanitary Castings | 1 MT | 1. Major Input comprising of Pig Iron/ CI Scrap/ Steel Melting Scrap
2. Low Ash Met. Cocke (Ash: Below 15%) 3. Ferro Alloy comprising of FeSi & FeMn: 4. Other inputs comprising of Fireclay and Fired silica Refractory (Bricks/ Mass), Grinding Wheel and Black Bituminous Paint 5. Packing material (MS Round bars/ Flats/ Strips for crating and stuffing) 8. |
1100 kg
110 kg 5 kg CIF value of all these items taken together restricted to 1% of FOB value of exports As per packing Policy |
| Note : Out of the total quantity of the input permitted against item No. 1 above, the quantity of steel melting scrap shall be restricted to 5% of the said total quantity. | ||||
| 21. | 592 | Engineering Product
Sr.No.C491 |
The description of export item shall be amended to read as under:-
“High Chrome Castings for Cement Grinding Mills (Composition: Cr.30-32%, Moly-2.5-3%, Si 1.5-2.5% and C-1.5-2.5%, Balance-Iron)” |
-:11:-
| 22. | 599 | Engineering Product
Sr.No.C508 |
The description of import item at Sr. No. 1(b) & 1(c), (without any change in quantity) shall be amended to read as under:-
“1(b).Energy Sources /Fuels (Natural gas/LNG, NGL (Condensate/ gaseous), Naptha, HSD Oil, Furnace Oil) (Only for plants having captive power plant with facilities installed for use of specific energy sources/Fuel)” “1(c).Energy Sources / Fuels (natural gas/LNG, NGL (condensate/ gaseous), Naptha, High Speed Diesel Oil, Light Diesel Oil, Furnace Oil) (for re-heating furnace in rolling mills, ladle heating and tundish pre-heating).” |
| 23. | 623 | Engineering Product
Sr.No.C570 |
The note below this entry shall be substituted by the following :-
“Note : If the export product is painted / coated in addition relevant Paint/ coating Powder may be allowed to the extent of 4% of the FOB value” |
-:12:-
| 24. | 626 | Engineering Product
Sr.No.C597 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C597 | CI Pipes and Fittings | 1 MT | 1. Major Input comprising of Pig Iron/ CI Scrap/ Steel Melting Scrap
2. Low Ash Met. Cocke (Ash: Below 15%) 3. Ferro Alloy comprising of FeSi & FeMn: 4. Other inputs comprising of Fireclay and Fired silica Refractory (Bricks/ Mass), Grinding Wheel and Black Bituminous Paint 5. Packing material (MS Round bars/ Flats/ Strips for crating and stuffing) 9. |
1100 kg
110 kg 5 kg CIF value of all these items taken together restricted to 1% of FOB value of exports As per packing Policy |
| Note : Out of the total quantity of the input permitted against item No. 1 above, the quantity of steel melting scrap shall be restricted to 5% of the said total quantity. | ||||
-:13:-
| 25. | 635 | Engineering Product
Sr.No.C671 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C671 | High Chromium Grinding Media Balls for Cement Grinding Mills (Composition: Cr.-16-17%, Mo-0.6-0.7%, Si-0.6-0.7%, C-1.5-2.5%, Fe-Balance) | 1 MT | 1. Mild Steel Scrap
2. HC Ferro Chrome 3. Ferro Moly (Mo-75%) 4. Ferro Silicon (Silicon 75%) |
0.90 MT
292 kg 10 kg 10 kg |
| 26. | 641 | Engineering Product
Sr.No.C707 |
The description of import item at Sr. No. 2 (without any change in quantity) shall be substituted by the following:-
“2. Zinc OR Paint OR Coating Powder” |
| 27. | 646 | Engineering Product
Sr.No.C734 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C734(a) | Needle Rollers upto 4 mm Dia | 1 kg | 1. Steel wire to SAE 52100/100 CRG/ SUJ2/equivalent
2. Misc. Items: Grinding Wheel, work Rest Blade, Green Silicon Carbide, Rust Preventive Chemical, |
1.45 kg
Upto 5% of FOB value of exports |
-:14:-
| Molykote DX, Packing Grease, Carbide Tips, O Rings, Oil Seals, Rubber Wheels, Lubricating Oils, Vulcolon, Polishing Compound, Soda Ash & Caustic Soda | |||||
| C734(b) | Needle Rollers above 4 mm to 8 mm Dia | 1 kg | 1. Steel wire to SAE 52100/ 100 CRG/ SUJ2/ equivalent
2. Misc. Items: Grinding Wheel, work Rest Blade, Green Silicon Carbide, Rust Preventive Chemical, Molykote DX, Packing Grease, Carbide Tips, O Rings, Oil Seals, Rubber Wheels, Lubricating Oils, Vulcolon, Polishing Compound, Soda Ash & Caustic Soda |
1.28 kg
Upto 5% of FOB value of exports |
|
| C734(c) | Needle Rollers above 8 mm Dia | 1 kg | 1. Steel wire to SAE 52100/ 100 CRG/ SUJ2/ equivalent
2. Misc. Items: Grinding Wheel, work Rest Blade, Green Silicon Carbide, Rust Preventive Chemical, |
1.21 kg
Upto 5% of FOB value of exports |
|
-:15:-
| Molykote DX, Packing Grease, Carbide Tips, O Rings, Oil Seals, Rubber Wheels, Lubricating Oils, Vulcolon, Polishing Compound, Soda Ash & Caustic Soda |
| 28. | 654 | Engineering Product
Sr.No.C810 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C810 | Snap Fastners consisting of Stud & Socket | 1 kg | 1. Brass Strips
2. Phosphor Bronze Wire |
1.15 kg/kg content in export product
1.04 kg/kg content in export product |
| 29. | 657 | Engineering Product
Sr.No.C831 |
The description of import item at Sr. No. 1 (without any change in quantity) shall be amended to read as under:-
“ Seamless Stainless Steel Tubes/Pipes (Hot finished) (OD not less than 42 mm) |
| 30. | 733 | Engineering Product
Sr.No.C1125 |
In the description of export item the Word “SAE797” shall be substituted by the following:-
“SAE792” |
-:16:-
| 31. | 756 | Engineering Product
Sr.No.C1292 |
The description of export item shall be amended to read as under:-
“Carbon Steel Submerged arc welded Pipes with 3 Layer Polyethylene coating of 3.5 mm thickness and having coating weight of 4.20 kgs.+/-5% per Sq.Mtr.” |
| 32. | 781 | Engineering Product
Sr.No.C1385 |
The description of export item shall be amended to read as under:-
“Plates for Lead Acid Storage Battery” |
| 33. | 8 | Engineering Product
Sr.No.C1392 (amended vide Public Notice No. 27 Dated:01/08/2002) |
1. After the import item at Sr. No. 4(d) the following imports items (with quantity) shall be added:-
“OR 4(a) PVC Resin – 0.63 kg 4(b) Plasticizer – 0.315 kg 4(c) Filler Material – 0.105 kg (Calcium Carbonate/ Alumina/Kolin” 2. After note No. 1 below this entry, the following foot note shall be added:- Note: 2.In case PVC Stabilizer/ Tin Stabilizer is also opted for import, it can be permitted upto 3% of compound and equivalent reduction in PVC resin. |
| 34. | 795 | Engineering Product
Sr.No.C1469 |
The description of export item shall be amended to read as under:-
“Cistern Side Inlet valve, Cistern Bottom Inlet Valve, Cistern Outflow Valve” |
-:17:-
| 35. | 799 | Engineering Product
Sr.No.C1492 |
The description of import item at Sr. No. 1, (without any change in quantity) shall be amended to read as under:-
“Hot Rolled Silicon Electrical Steel Wide Coils of relevant Grade containing 2.5% – 3.5% Silicon” |
| 36. | 803-804 | Engineering Product
Sr.No.C1504 |
1. The description of import item at Sr. No. 1, (with quantity) shall be amended to read as under:-
“1. Hot Rolled Silicon Electrical – 1125 kg Steel wide Coils of relevant grade containing 0.60% to3.2% Silicon with varying quantity of ALuminium” 2. After import item at Sr. No. 5, the following additional import item (with quantity) shall be added:- “6. Cold Rolling Mill Rolls – 1.00 kg 7. Mineral Based Rolling Oil – 0.35 kg” 3. The note below this entry shall be added:- Note : Import item No. 2 will not be allowed if export product is CRNO in Semi processed state. |
| 37. | 828 | Engineering Product
Sr.No.C1577 |
The description of import item at Sr. No. 1, (without any change in quantity) shall be amended to read as under:-
“hardened and Tempered Carbon Steel Strips (In Coils)/ Stainless Steel (Martensitic Grade) Strips (in Coils)” |
-:18:-
| 38. | 829 | Engineering Product
Sr.No.C1583 |
The following Note below this entry shall be added:-
“Note: If the export product is galvanized zinc may be allowed as 4% of the weight of parts to be galvanised” |
| 39. | 868 | Engineering Product
Sr.No.C1733 |
The description of import item at Sr. No. 1, (without any change in quantity) shall be amended to read as under:-
“Cold Rolled Decarburized, Magnesium Oxide (MgO) coated, Silicon Electrical Alloy Steel Strips/ Wide Coils of relevant grade containing 2.5% to 3.5% Silicon” |
| 40. | 19 | Engineering Product
Sr.No.C1799 (amended vide Public Notice No. 37 Dated:03.10.2002) |
The description of export product shall be amended to read as under:-
“Filter Cartridge: Cylindrical Air Intake Filter / Pulse Jet Air Filter/ Conical Filter Cartridge/ Cylindrical Filter Cartridge” |
| 41. | 22 | Engineering Product
Sr.No.C1809 (amended Vide Public Notice No.37 Dated: 03.10.2002) |
The description of import item at Sr. No. 5(a), (without any change in quantity) shall be amended to read as under:-
“5(a). Berlaclear CT Laquer OR Albrilac HB (for Electrophoretic Laquer)/ Polyester Powder for coating” |
| 42. | 42 | Engineering Product
Sr.No.C1815 (amended Vide Public Notice No. 44 Dated: 18.10.2002) |
The description of export item shall be amended to read as under:-
“Wax Impregnated Carbon Electrodes for Dry Cell Battery” |
-:19:-
| 43. | 19 | Engineering Product
Sr.No.C1834 (amended Vide Public Notice No.52 Dated: 05/12/2002) |
The description of import items at Sr. No. 1, 2, 6 & 7shall be amended to read as under:-
“1. Copper in form of Copper Cathode / Copper Wire / Bars /C.C. Rods / (EC. Grade) 2. HDPE Compound 6. Poly Copolymer 7. LDPE Compound” |
| 44. | 20 | Engineering Product
Sr.No.C1835 (amended Vide Public Notice No.52 Dated: 05/12/2002) |
The description of import items at Sr. No.1, 2, 6 & 7 shall be amended to read as under:-
“1. Copper in form of Copper Cathode / Copper Wire / Bars /C.C. Rods / (EC. Grade) 2. HDPE Compound 6. Poly Copolymer 7. LDPE Compound” |
| 45. | 20 | Engineering Product
Sr.No.C1836 (amended Vide Public Notice No.52 Dated: 05/12/2002) |
The description of import items at Sr. No. 1, 2, 6 & 7 shall be amended to read as under:-
“1. Copper in form of Copper Cathode / Copper Wire / Bars /C.C. Rods / (EC. Grade) 2. HDPE Compound 6. Poly Copolymer 7. LDPE Compound” |
| 46. | 20 | Engineering Product
Sr.No.C1837 (amended Vide Public Notice No.52 Dated: 05/12/2002) |
The description of import item at Sr. No. 9 (without any change in quantity) shall be amended to read as under:-
“Bearing of relevant Type” |
-:20:-
| 47. | 24 | Engineering Product
Sr.No.C1868 (amended Vide Public Notice No.66 Dated: 04/03/2003) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C1868 | Electric Storage Water Heater | 1 No. | 1. Polypropylene Granules
2. Heating Element 3. Polyol Resin 4. Isocyanate Hardner 5. Thermostate 6. Safety Valve 7. M.S. Sheet / Wide Coil/ Strips of relevant grade 8. Nut & Bolt 9. Copper Sheet 10. S.S. Sheet/ Wide Coil/ Strips of relevant grade |
1.05 kg/kg content in export product
1 No. 0.408 kg/kg of PU Foam contained in export product 0.612 kg/kg of PU Foam contained in export product 1 No. 1 No. 1.05 kg/kg content in export product Net to net 1.02 kg/kg content in export product 1.18 kg/kg content in export product |
-:21:-
| 48. | 44 | Engineering Product
Sr.No.C1880 (Notified Vide Public Notice No. 03 Dated: 31.03.2003) |
After import item at Sr. No. 4 the following import items (with quantity) shall be added:-
“5. Fiber Glass – 1.05 kg/kg content in the export product 6. Nylon Resin – 1.05 kg/kg content in the export product” |
| 49. | 891 | Engineering Product
Table No.6 |
In the Engineering Table No. 6 after Sr. No. 69 the following export items & imports (with quantities) shall be added:- | |||||
| Sr. No. | Export Item | Import Item (in kgs)
1a 1b 2a 2b |
||||||
| 70 | 1.5 SQ MM x 1 Core | 13.6 | 4.2 | 6.5 | – | |||
| 71 | 0.5 SQ MM x 2 Cores | 9.1 | 2.8 | 36 | – | |||
| 50. | 10 | Plastic Products
Sr.No.H-461 (amended vide Public Notice No.61 Dated:03/02/2003) |
The word “OR” mentioned between export product (A) and (B) against SION at SR. No. H-461 shall be deleted. |
| 51. | 1117 | Textile Product
Sr.No.J351 |
The quantity of import item at Sr. No. 1 shall be corrected to read as under:-
“2.00 Sq. Mtr. Instead of 2.40 Sq. Mtr.” |
-:22:-
| 52. | 53 | Food Products
Sr.No.K-159 (Notified vide Public Notice No.03 Dated: 31.03.2003) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| K-159 | Scented Candles assorted sizes, shapes and colours | 1 kg | 1. Paraffin Wax/ Microcrystalline Wax (Microcrystalline Wax if used should not be allowed more than 2.5% of he requirement of Wax)
2. Fragrances 3. Wicks / Wicking 4. Colours / Dyes 5. Ultraviolet Stabiliser (UV sorb.) 6. Vybar Chemicals (Vybar 103) |
0.970 kg
0.03 kg (Subject to 20% FOB value) 0.002 kg 0.005 kg 0.006 kg 0.011 kg |
| Note : The above SIONs shall be subject to actual user condition and the inputs allowed under the SIONs shall be relevant to the manufacture of scented candles. | ||||
-:23:-
Annexure “B” to the
Public Notice No. 15
Dated: 07/07/2003
CHEMICALS AND ALLIED PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3188 | Bisphenol Amino Ester {propane 2,2, Diphenyl – 4’,4” Bis (2 Amino Phenyl – sulfonyloxy)} | 1 kg | 1. Bis-phenol
2. 2-Nitro Benzene Sulfonyl Chloride (95% Min.) 3. Ortho Dichloro Benzene |
0.585 kg
1.122 kg 1.100 kg |
| A3189 | 1,3-Dichloroacetone | 1 kg | 1. Epichlorohydrin
2. Sodium Dichromate |
1.31 kg
2.56 kg |
| A3190 | 5,5-Dimethyl Hydantoin | 1 kg | 1. Ammonium Bicarbonate
2. Acetone 3. Sodium Cyanide |
0.830 kg
0.609 kg 0.515 kg |
| A3191 | N-N’-Bis (1,4 Dimethyl Pentyl) Para Phenylene Diamine | 1 kg | 1. Methyl Isoamyl Ketone
2. Para Nitro Aniline 3. Platinum Catalyst (Platinium content 3% on carbon) |
0.838 kg
0.455 kg 0.27 gm |
| A3192 | Poly Isocyanate (Phenol Blocked Polyisocyanate)
Isocyanate content: 14+/-1% Colour & appearance: Yellow Light Brown Solid Melting Point 80º – 95º |
1 kg | 1. Toluene – di – Isocyanate
2. Phenol |
0.590 kg
0.405 kg |
-:24:-
| A3193 | Potassium Chlorate | 1 kg | 1. Potassium Chloride | 0.640 kg |
| A3194 | Potassium Superoxide | 1 kg | 1. Sodium Metal
2. Potassium Chloride |
1.321 kg
8.194 kg |
| A3195 | Sodium Potassium Alloy | 1 kg | 1. Sodium Metal
2. Potassium Chloride |
1.524 kg
7.904 kg |
| A3196 | 2 Chloro Ethyl Amine Hydrochloride (70% Solution) | 1 kg | 1. Mono Ethanol Amine | 0.410 kg |
| A3197 | Di Allyl Phthalate | 1 kg | 1. Phthalic Anhydride
2. Allyl Alcohol |
0.718 kg
0.698 kg |
| A3198 | Flame Retardant High Impact Polystyrene (With MFI<6) | 1 MT | 1. Styrene Monomer
2. Polybutadiene Rubber 3. Mineral Oil 4. Flame Retardant Additive 5. Antimony Trioxide 6. Titanium Dioxide/ Pigment/ Relevant Colour Master Batch |
0.770 MT
0.071 MT 0.018 MT 0.140 MT 0.046 MT 0.020 MT |
| A3199 | Flame Retardant High Impact Polystyrene (With MFI>6) | 1 MT | 1. Styrene Monomer
2. Polybutadiene Rubber 3. Mineral Oil 4. Styrene Butadiene Copolymer 5. Flame Retardant Additive 6. Antimony Trioxide 7. Titanium Dioxide/ Pigment/ Relevant Colour Master Batch |
0.714 MT
0.066 MT 0.017 MT 0.082 MT 0.123 MT 0.041 MT 0.020 MT |
-:25:-
| A3200 | Toughened Polystyrene (S.B. Copolymer) | 1 MT | 1. Styrene Monomer
2. Mineral Oil 3. Styrene Butadiene Copolymer |
0.371 MT
0.006 MT 0.663 MT |
| A3201 | Coloured High Impact Polystyrene | 1 MT | 1. Styrene Monomer
2. Mineral Oil 3. Styrene Butadiene Copolymer 4. Titanium Dioxide/ Pigment/ Relevant Colour Master Batch |
0.942 MT
0.087 MT 0.022 MT 0.025 MT |
| A3202 | Polyester Polyol (Expol PH 350) | 1 kg | 1. Phthalic Anhydride
2. Di-Ethylene Glycol 3. Pentaerythintol 4. Fascat 4100 (Catalyst) 5. 12 Hydroxy Stearic Acid |
0.3735 kg
0.5515 kg 0.031 kg 0.00026 kg 0.0640 kg |
| A3203 | Polyester Polyol (Expol PH 270) | 1 kg | 1. Phthalic Anhydride
2. Di-Ethylene Glycol 3. Adipic Acid 4. Penta-Erythritol 5. Fascat 4100 (Catalyst) |
0.380 kg
0.52 kg 0.0803 kg 0.0412 kg 0.00025 kg |
| A3204 | Compreg (Compressed and Impregnated) Sheets/ Components thereof | 1 CBM | 1. Relevant Wood Log
OR Commercial Venner 2. Phenol 3. Formaldehyde 4. Furnace Oil |
3.07 CBM
1.53 CBM 52 kgs 61.85 kgs 81.2 Liters |
-:26:-
| A3205 | Octadecyl-3-(3’,5-di-tert-butyl-4-hydroxy Phenyl Propionate | 1 kg | 1. 2,6 Di Tertiary Butyl Phenol
2. Methyl Acrylate 3. Stearyl Alcohol 4. Methanol 5. Di-butyl Tin Oxide |
0.496 kg
0.227 kg 0.525 kg 0.729 kg 0.0021 kg |
| A3206 | Penta-Erythritol Tetrakis (3, (3,5-ditertiary-butyl-4-hydroxy Phenyl Propionate | 1 kg | 1. 2,6 Ditertiary Butyl Phenol
2. Methyl Acrylate 3. Penta-erythritol |
1.073 kg
0.448 kg 0.145 kg |
| A3207 | Monomethyl Amine 40% Solution | 1 kg | 1. Methanol
2. Ammonia 3. Alumina Silica Catalyst |
0.434 kg
0.188 kg 0.180 gram |
| A3208 | Limotrigine | 1 kg | 1. 2, 3, Dichloro Benzoyl Chloride
2. Amino Guanidine Bicarbonate |
2.05 kg
1.60 kg |
| A3209 | Ornidazole | 1 kg | 1. Glyoxal 40%
2. Formic Acid 99% 3. Epichlorohydrin 4. Methyl Iso Butyl Ketone |
2.50 kg
4.09 kg 5.33 kg 1.55 kg |
| A3210 | Diclofenac resinate | 1 kg | 1. Aniline
2. Perchloro Ethylene 3. Potassium Carbonate 4. Phenol 5. Sodium Methoxide 6. Caustic Potash 7. Cholestyramine 8. Iso Propyl Alcohol |
0.30 kg
2.30 kg 0.63 kg 1.35 kg 0.20 kg 0.10 kg 0.60 kg 0.88 kg |
-:27:-
| A3211 | Ticlopidine Hcl | 1 kg | 1. Thienyl 2-Ethanol
OR Thiophene-2- Ethanol 2. Ortho Chloro Benzylamine 3. Para Formaldehyde 4. Isopropyl Alcohol 5. Pyridine 6. Methylene Chloride |
0.72 kg
0.80 kg 0.443 kg 0.85 kg 0.33 kg 2.17 kg |
-:28:-
Annexure “C” to the
Public Notice No. 15
Dated: 07/07/2003
ENGINEERING PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C1888 | Ball Pen Tips of Nickel Silver Wire | 1.0 million numbers (176.4 kg) | 1. Nickel Silver Wire Dia 2.3 mm of relevant grade
2. Tungsten Carbide Balls |
1.9 kg/kg content in the export product
1.02 million Nos. |
| C1889 | Carbon Electrode | 1 kg | 1. Copper Cathode | 1.07 kg/.kg content in export product |
| C1890 | Copper Bus Bars | 1 kg | 1. Copper Cathode / Copper Wire Bar
OR Copper Scrap |
1.05 kg
1.07 kg |
| C1891 | Aluminium Radiator | 1 kg | 1. Aluminium Tube
2. Aluminium Foil 3. Aluminium Sheet/ Strips 4. Brazing Flux 5. Plastic tanks (for Top & Bottom of Radiator) |
1.02 kg./kg. content in export product
1.02 kg./kg. content in export product 1.03 kg./kg. content in export product 5% of FOB value of export Net to net |
-29:-
| C1892 | Welded Steel Link Chain | 1 MT | 1. Copper Electrode
2. Bandshaw Blade |
2 kg
2 Mtr. |
| C1893 | Mica Heating Element (electrical heating element) | 1 kg | 1. Silicon bonded micanite/ Heater Plate- Electrical insulating material
2. Heating Tape/Wire- Generate Heat by current 3. Aluminized Steel Sheet – resistance to corrosion under high heat 4. Receptacle / Terminal connection between cable and end point |
1.05 kg./kg. content in export product
1.02 kg./kg. content in export product 1.05 kg./kg. content in export product Net to net |
| C1894 | Agricultural Tractor | 1 No. | A. Assembly / Sub-Assembly/ Components:
1. Air Compressor 2. Air/Fuel/Oil Filter 3. Automotive battery 4. Bearing (All Types other than Engine Bearings) such as ball bearings and Taper/Cylindrical / Needle Roller Bearings 5. Brake Assembly (Primary / Secondary) or components thereof 6. Cab Assembly or Components thereof |
-:30:-
| 7. Clutch Assembly (including Split / Torgue Type) or components thereof
8. Coupler 9. Electrical Equipment such as Alternator, Starter Motor, Dynamo, Regulator, Horns and Circuit Breakers 10. Electrical Switches/ Auto Lamps 11. IC Engine (Complete) or Components thereof 12. V Belt and Pulley 13. Fuel Tank 14. Front Axle Support 15. Front Axle (2 Wheel Drive/ 4 Wheel Drive) including Sleeves, Spline shaft 16. Hydraulic Pump (including Auxiliary Hydraulic Pump) 17. Hoses 18. Hydraulic Cylinder / Hydraulic Valves 19. Hardware items such as Nuts, Bolts, Pins, Washers, Spacers, Shims, Drain Plugs 20. Hood / Bonnet 21. Instrument Cluster 22. Oil Seals/ O-Rings 23. Oil Pump |
Net to Net |
-:31:-
| 24. Power Steering Unit or Components thereof
25. Power Lift Complete 26. radiator 27. Safety Equipment a) Mechanical (Rops, Safety Belt) b) Electrical (Safety Neutral Switches Safety Belt Indicator Switches) 28. Seat Assembly 29. Silencer 30. Tyre / Tubes 31. Wheel Rims 32. Transmission Complete (constant mesh/ synchro/ shuttle / creeper) or components thereof 33. Three Point Linkages (Front / Rear) 34. Turbo-Charger 35. Water Pump or components thereof 36. Wiring Harness including Plug Socket B. Raw Material: 1. Pig Iron |
1.1 kg./ kg. content in export product |
-:32:-
| 2. Alloy Steel Rods / Rounds/ Billets
3. Hot Rolled / Cold Rolled (Sheets / Coils) 4. Terne Coated Steel Sheets 5. Plastic / Nylon Formulation in granules / Powder form |
1.1 kg./ kg. content in export product
1.1 kg./ kg. content in export product 1.05 kg. / kg. content in export product 1.05 kg. / kg. content in export product |
|||||||
| Note: Net content of raw material as per SION shall be of the component manufactured out of this raw material and shall not include components allowed for import. | ||||||||
| C1895 | 24” (600 mm) complete ceiling fan with Metal Blades | 1 No. | 1. Super Enamelled Copper Wire / Copper Wire Rod of 8 mm electrolytic Grade
2. CRNGO Sheet / Coil 0.5 mm thickness 3. Aluminium Alloy 4. Ball Bearing Oper Closed 6201 & 6202 or equipment 5. M. S. Sheet 6. Aluminium Sheet / CRCA Sheet (for Blades of fans) 7. Kraft paper |
0.214 kg
1.381 kg 0.776 kg 2 Nos. 0.341 kg 0.257 kg As per packing policy |
||||
-:33:-
| C1896 | Copper Bowls with Lids | 1 No. | 1. Copper Sheet
2. Copper Pipe of relevant Dimensions |
1.05 kg./kg. content in export product
1.01 kg. / kg. content in export product |
| C1897 | Brazed Wheel Chair Components made out of Steel Tube / Section / profile e.g. Frames/ Cross Bar/ Leg Rest/ Arm rest | 1 kg | 1. Steel Tube / Section / Profile
2. Brazing Wire 3. Brazing Flux |
0.978 kg
0.05 kg 0.012 kg |
| C1898 | Valve for LPG Cylinder made of BrassModel NO. M 014 S R | 1 No. | 1. Brass Rod (Round) | 1.23 kg/kg content in the export product |
| C1899 | E.O.T. Crane | 1 No. | 1. Relevant Welding Wires
2. Bearing Taper Roller/ Spherical Roller Ball Bearing 3. POG 10 D 1024 + FSL Digital Tacho Overspeed Switch combination 4. Twist knot wire wheel Brushes 5. DC Grinding Wheel |
2% of Steel to be Welded
Net to net Net to net | |2% of FOB | value |
| C1900 | Fabricated Articles made of SS not elsewhere Specified | 1 kg | 1. SS Sheet/ wide Coil/ Strips of relevant grade | 1.05 kg |
*****
