The Public Notice No. 20 (RE-03)/2002-2007, dated 01st July 2002, issued by the Ministry of Commerce & Industry, addresses amendments in the Export and Import Policy 2002-2007, particularly in the Handbook of Procedures, Vol. 2. The Director General of Foreign Trade (DGFT) has made modifications to the Standard Input Output Norms, adding new entries under plastic and textile products. Specifically, entries related to plastics (Sr. No. H-480 to H-507) and textiles (Sr. No. J-353) have been included. The new entry under textiles pertains to blended yarn containing flax and polyester, with specific quantities allowed for flax fibre and polyester staple fibre. These changes are aimed at ensuring proper export-import procedures and compliance with the revised norms. The amendments are made in public interest to maintain the smooth functioning of the export-import system.
GOVERNMENT OF INDIA
MINISTRY OF COMMERCE & INDUSTRY
DEPARTMENT OF COMMERCE
PUBLIC NOTICE NO. 20 (RE- 03)/ 2002-2007
NEW DELHI : DATED : 01/07/2002.
Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.
2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.
3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure “A” to this Public Notice shall be made.
4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-
CHEMICALS AND ALLIED PRODUCTS
After the existing entry at Sr.No.A-2990, the new entries at Sr.No.A-2991 to A-3004 shall be added as per Annexure ”B” to this Public Notice.
ENGINEERING PRODUCTS
After the existing entry at Sr.No.C-1774, the new entries at Sr.No.C-1775 to C-1790 shall be added as per Annexure ”C” to this Public Notice.
-:2:-
PLASITC PRODUCTS
After the existing entry at Sr.No.H-479, the new entries at Sr.No. H-480 to H-507 shall be added as per Annexure ”D” to this Public Notice.
TEXTILE PRODUCTS
After the existing entry at Sr.No.J-352, the new entry at Sr.No. J-353 shall be added as per Annexure “E” to this Public Notice.
This issues in public interest.
(N.L. LAKHANPAL)
DIRECTOR GENERAL OF FOREIGN TRADE
(R. C. SAINI)
DIRECTOR GENERAL OF FOREIGN TRADE
FOR DIRECTOR GENERAL OF FOREIGN TRADE
-:3:-
Annexure “A” to the
Public Notice No. 20
Dated: 01/07/2002
AMENDMENTS/CORRECTIONS
| Sr.
No. |
Page
No. |
Reference | Amendments/Corrections |
| 1 | 2 | 3 | 4 |
| 1. | 24 | Chemicals & Allied Products
Sr.No.A93 |
The description of export item shall be corrected to read as under:-
“Bisacodyl” |
| 2. | 120 | Chemicals & Allied Products
Sr.No.A878 |
Import items at Sr. NoSr. 1 & 2, shall be substituted by the following import items with quantity:-
“1. Beta Naphthol – 0.189 kg OR Tobias Acid 0.189 kg 2. Naphthalene Crude – 0.279 kg OR H. Acid 0.242 kg” |
| 3. | 133 | Chemicals & Allied Products
Sr.No.A975 |
The description of export item shall be amended to read as under:-
“Vat Blue BC Microperle (Vat Blue 6 Parle) (Dye content 36%)” |
| 4 | 153 | Chemicals & Allied Products
Sr.No.A1170 |
After import item at Sr. No. 1, the additional import item (with quantity) shall be added:-
“2. Coal – 0.440 kg” |
| 5. | 207-208 | Chemicals & Allied Products
Sr.No.A1687 |
The description of export item shall be corrected to read as under:-
“Metal Fitted/ Bonded/ Un-bonded Rubber part (Moulded/ Extruded) including Engine Mounting and Automotive parts” |
-:4:-
| 6. | 237 | Chemicals & Allied Products
Sr.No.A1842 |
1. The description of the export item shall be amended to read as under:-
“Polyester Staple Fibre/ Polyester Tow/ Polyester Tops/ Polyester Spun Yarn (PTA Route)” |
| 2. After the import item at Sr. No. 8, the following additional import item (with quantity) shall be added:-
“9. Furnace Oil – 1.044 Litre” 3. The following Note below this norm shall be added:- “Note 1: The quantity indicated against item 9 – Furnace Oil is for export product – Polyester Spun Yarn. For other export products covered under this entry, the quantity of Furnace Oil shall be allowed @ 0.3118 Litre/ kg of export.” |
| 7. | 255 | Chemicals & Allied Products
Sr.No.A1996 |
In the import item at Sr. No. 1, the following alternative import item (with quantity) shall be added:-
“1. Benzyl Chloride – 0.885 kg OR Toulene – 0.752 kg” |
| 8. | 301 | Chemicals & Allied Products
Sr.No.A2335 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2335 | Benzyl Benzoate | 1kg | 1. Benzyl Chloride
or Toulene 2. Sodium Benzoate |
0.663 kg
0.563 kg 0.755 kg |
-:5:-
| 9. | 332 | Chemicals & Allied Products
Sr.No.A2606 |
1. The description of export item shall be amended to read as under:-
“S+Ibuprofen/(+)-2-(4-Isobutyl Phenyl Propionic Acid/Dexibuprofen” 2. The description of import item at Sr. No. 6, shall be amended (without any change in quantity) to read as under:- “Neopentyl Glycol” |
| 10. | 359 | Chemicals & Allied Products
Sr.No.A2833 |
1. the description of export item shall be amended to read as under:-
“Tubular Glass Vials (4 ml., 5 ml., 10 ml. size)” 2. The quantity of import item at Sr. No. 1 shall be amended to read as under:- “1.23 kg” |
| 11. | 359 | Chemicals & Allied Products
Sr.No.A2841 |
Quantity of import item at Sr. No. 2 shall be amended to read as under:-
“2.260 kg instead of 2.482 kg” |
| 12. | 531 | Engineering Product
Sr.No.C274 |
The description of import items at Sr. No. 1, (without any change in quantity) shall be amended to read as under:-
“CRCA Sheets/Coils” |
| 13. | 626 | Engineering Product
Sr.No.C603 |
The description of export item shall be amended to read as under:-
“Machined Cold Rolled/Formed ring for bearing races, CV cages” |
-:6:-
| 14. | 630 | Engineering Product
Sr.No.C635 |
1. After the import item at Sr. No. 13, the following additional import items (with quantity) shall be added:-
“14. Gasket – Net to net 15. Lubricant – Net to net” 2. After the Foot Note at Sr. No. 1, the following foot note shall be added:- “Note: 2. Import of Gasket & Lubricants shall be on net to net basis with accountability and specification should match in import and export” |
| 15. | 660 | Engineering Product
Sr.No.C844 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C844 | Steel/Cops/Pirn / Bobbin | 1 kg | 1. Carbon Steel Tubes/ Pipes
2. ABS Granules/Resin 3. CRCA Steel Sheet/ Strips |
1.05 kg/kg content of Steel Tube / Pipes in the export product
1.05 kg/kg content of ABS in the export product 1.15 kg/kg content of Steel Sheet in the export product |
-:7:-
| 16. | 705 | Engineering Product
Sr.No.C1052 |
The description of export item shall be amended to read as under:-
“Inlet/Exhaust Valve” |
| 17. | 705 | Engineering Product
Sr.No.C1053 |
The norm covered by this entry shall be deleted. |
| 18. | 764 | Engineering Product
Sr.No.C1333 |
The description of import item at Sr. No. 7, with quantity shall be substituted by the following:-
“7. Furnace Oil – 500 LtrSr. OR HSD – 470 LtrSr. |
| 19. | 780 | Engineering Product
Sr.No.C1383 |
The description of export item shall be amended to read as under:-
“Automotive Oil filter/Fuel Filter/Spin-on Filters/Oil or Filter Assembly/Element Oil Filter/Canister-Lub Oil Filter/Filter Elements/Oil Separator element/Pressure filter batch/Element/Oil Filter or Fuel Filter/Element Assembly-Fuel Filter/Filter Assy. Oil/Air Filter |
| 20. | 825 | Engineering Products
Sr.No.C1547 |
In the description of import item at Sr. No. 1 the following alternative import item (with quantities of its sub-items) shall be added:-
“OR RAW MATERIAL 1. (1) Copper Bar – 1.01 kg/kg content in the Vacuum Interrupter |
-:8:-
| (2) OFHC Bar – 1.01 kg/kg
content in the Vacuum Interrupter (3) SS Strips/Plate – 1.05 kg/kg content in the Vacuum Interrupter (4) Bismuth powder/ – 1.03 kg/kg chrome powder Spherical OFHC Cu powder COMPONENTS (1) Forged ZLR Ring – 1 (2) Bellow Closure – 1 Plate |
|||
| (3) Convolution – 1
(4) Pressed End Plate – 1 (5) End Plate – 1 (6) Bellow Assembly – 1 (7) Stud Plate – 1 (8) Bearing retainer – Net to net plate (9) Bearing – Net to net (10) Gauze Tilter – Net to net (11) Pump Port Blank – 1 (12) Restrain Band – 1 |
|||
| (13) Pump Port – 1
(14) End Plate Assy. – 1 (15) Pump Port Braze – 1 Ring (16) MC Stub – 1 (17) FC Stub – 1 (18) Glass Ceramic – 2 Envelope |
-:9:-
| (19) End Shield – 2
(20) Center Shield – 2 (21) Getter – 1 (22) ZLR Contact Tips – 2 (23) MC Base – 1 (24) FC Base – 1 (25) Incusil Pallet – 1 (26) End Plate – 2 (27) Braze Washer – 4 (28) CLR Cup – 2 (29) Pumped Assembly – 1 (30) Bearing Liner – 1 (31) Mounting Stud – 3 (32) Lable – 1 (33) Restraining Band – 6 (34) Plain Washer – 3 (35) Spring Washer – 3 (36) HEX Nut – 3” |
| 21. | 829 | Engineering Product
Sr.No.C1579 |
The description of export item shall be amended to read as under:-
“Iron Nickel Alloy Wire/strip of different composition” |
| 22. | 829 | Engineering Product
Sr.No.C1580 |
The description of export item shall be amended to read as under:-
“Nickel Chromium Alloy Wire/strip of different composition” |
| 23. | 829 | Engineering Product
Sr.No.C1581 |
The description of export item shall be amended to read as under:-
“Nickel Copper Alloy Wire/strip of different composition” |
-:10:-
| 24. | 834 | Engineering Product
Sr.No.C1608 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C1608 | Diesel Generating Set (specification to be Indicated by the applicant) | 1 No. | 1. Relevant Diesel Engine
2. Relevant Alternator 3. Relevant Key Start Control Module |
1 No.
1 No. 1 No. |
| 25. | 835 | Engineering Product
Sr.No.C1614 |
The description of import item at Sr. No. 6, shall be amended (without any change in quantity) to read as under:-
“6. Aluminium Alloy (LM-6)” |
| 26. | 841-842 | Engineering Product
Sr.No.C1647 |
COMPONENTS
1. After the import item at Sr.No. 14, the following additional import item (with quantity) shall be added:- “15. Pipe fittings such as – Net to net Elbow, Tee, Bars, Reducer, Coupling relevant material” RAW MATERIAL 2. After the import item at Sr.No. 8, the following additional import items (with quantity) shall be added:- “9. Non Alloy Steel Welded – 1.02 kg/kg pipe of relevant content in dimension the Export product |
-:11:-
| 10.Alloy Steel Welded – 1.02 kg/kg
Pipe including SR.SR. content in Pipes of relevant the Export dimension Product” MISC. ITEMS 3. After the import item at Sr.No. 8, the following additional import items (with out any change in quantity) shall be added:- “9. Metal Polishing Chemical 10. Welding Rod 11. Tungsten Rod 12. Cutting Wheel” |
| 27. | 851 | Engineering Product
Sr.No.C1661 |
The description of export item shall be amended to read as under:-
“Oil Pressure Switch for Motor Vehicle” |
| 28. | 862-863 | Engineering Product
Sr.No.C1707 |
The quantity of alternative import item at Sr. No.15, shall be amended to read as under:-
“OR 15. Non Alloy Steel Sheet – 0.736 gms” |
| 29. | 938 | Leather Products
Sr.No.G-18 |
1. After description of import item at Sr. No. 8, the following additional import item (with quantity) shall be added:-
“9. Relevant Knitted – 1.01 kg/kg Ribbed fabric for content in the Cuff export product” |
-:12:-
| 2. The note No. 1, below this norm shall be amended to read as under:-
“Note.1: In case of export product, Synthetic Golf Gloves, same norms as above shall be applied. However, import item No. 1 shall be allowed as 1. Relevant Synthetic Leather/ Relevant Liner / Lining Materials to the extent of 0.112 sq.mtr. 2. For import of Leather Chemicals (Item No. 8), the requirement of Finished Leather per number of Glove is 0.50 sq. ft.” |
| 30. | 950 | Leather Products
Sr.No.G-35 |
1. After description of import item at Sr. No. 2(k), the following additional import item (with quantity) shall be added:-
“3. Relevant Knitted – 1.01 kg/kg Ribbed fabric for content in the Cuff export product” |
| 31. | 973 | Plastic Products
Sr.No.H-73 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| H73 | Epoxy Resin (Basic Liquid Resin having Epoxy value between 5.2 to 5.49) | 1 kg | 1. Epichlorohydrin
2. Bisphenol-A 3. Caustic Soda Lye (100%) |
0.600 kg
0.676 kg 0.250 kg |
-:13:-
| 32. | 981 | Plastic Products
Sr.No.H-120 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| H120 | I.V. Cannula | 1 No. | 1. ABS Resin for Tube Clamp
2. HDPE Granules for Plug 3. PP Granules for Adapter, Butterfly Cannula Holder, Protector Cover, Cap with Band, Vent Fitting 4. Stainless Steel Cannula of relevant length and dia |
1.05 kg/kg content in the export product
1.05 kg/kg content in the export product 1.05 kg/kg content in the export product 105 NoSr./ 100 NoSr. of export product |
| 5. Silicone Polymer Tube in cut pieces
OR Silicone Polymer Tube in rolls 6. Relevant Polymer Tube in cut pieces |
105 NoSr./ 100 NoSr. of export product (for cut pieces)
1.0 Mtr./ 100 NoSr. of export product (for rolls) 110 NoSr./ 100 NoSr. of export product (for cut pieces) |
-:14:-
| OR
Relevant Polymer Tube in rolls 7. Relevant Tyvek (coated or uncoated) of relevant GSM OR Relevant Medical Kraft Paper (coated or uncoated) of 60 GSM 8. Relevant Thermoforming Blister Sheet Rigid Sheet OR Soft Film |
6.24 Mtr./ 100 NoSr. of export product (for rolls)
0.00528 Sq. Meter 0.00528 Sq. Meter 0.614 Sq.Mtr./ 100 NoSr. of export product 0.853 Sq.Mtr./ 100 NoSr. of export product |
| 33. | 1007-1008 | Plastic Products
Sr.No.H-268 |
The description of export item shall be amended to read as under:-
“PVC Leather Cloth/ Foam Leather Cloth, Single Sided/ Both Sided (PVC Tarpaulin) having coating weight 1000 gms per Sq.Meter+ 5%” |
-:15:-
| 34. | 1036 | Plastic Products
Sr.No.H-423 |
The description of import items a), b), c) & d) under Sr. No. 2, the above said inputs (with quantity) shall be amended to read as under:-
“2.a) Primer for PVDC – 0.0077 kg Dispersion (Total Solid content 50% + 2%) b) Hardner for PVDC – 0.0001 kg Dispersion (Total Solid content 75% + 2%) c) Aqueous Dispersion – 0.1929 kg of PVDC (Total Solid content 55% + 1%) d) Ethyl Acetate Solvent – 0.040 kg” |
| 35. | GENERAL NOTE FOR FUEL | At the end of existing General Note for Fuel the following note shall be added:-
“Note: In any case, as per above General Note, the fuel shall not be allowed more than 7% of FOB value of exportSr.” |
| 36. | 1063-1064 | GENERAL NOTES FOR TEXTILES | After the General Notes for Textiles at Sr. No. 14, the following shall be added:-
“Note: 15. In case of Fabric, Flexibility upto +10% in GSM in import/export shall be allowed.” |
-:16:-
Annexure “B” to the
Public Notice No. 20
Dated: 01/07/2002
CHEMICALS AND ALLIED PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2991 | N-Carbethoxy Piperazine | 1 kg | 1. Piperazine
2. Ethyl Chloroformate 3. Caustic Soda 4. Methylene Chloride |
1.01 kg
1.27 kg 0.47 kg 0.75 kg |
| A2992 | N-isopropyl-N-Phenyl-P- Phenylenediamine (Vulkanox 4010 NA/LG) | 1kg | 1. P-Aminodiphenyl-amine
2. Acetone 3. Platinum Catalyst (platinum content 0.5%) |
0.826 kg
0.2700 kg 0.0002 kg |
| A2993 | 4- Amino-3-Methoxy Azo Benzene 3-Sulphonic Acid (MAA Base or PG Base) | 1 kg | 1. Ortho Anisidine
2. Metanilic Acid 3. Sodium Nitrite 4. Formaldehyde 37% 5. Sodium Hydroxide 6. Sodium Bisulfite 7. Sodium Acetate |
0.486 kg
0.598 kg 0.243 kg 0.348 kg 0.575 kg 0.465 kg 0.563 kg |
| A2994 | Dental Impression Compound | 454 gms pouch | 1. Potassium Alginate
2. Sodium Pyrophosphate 3. Magnesium Oxide 4. Celite 5. Potassium Hexofluoro 6. Colours |
64.83 gms
15.05 gms 30.11 gms 286 gms 4.63 gms CIF value restricted upto 2% of FOB value of export |
-:17:-
| 7. Flavours
8. Polypropylene Glycol 400 |
CIF value restricted upto 8% of FOB value of export
18.16 gms |
|||
| A2995 | Anticorrosion VCI Wrapping Paper containing 32 gms + 1 gm/ Sq.Mtr. | 1 Sq. Mtr. | 1. Woven (Fabric) Laminated Paper of relevant size
2. VCI FE-P Concentrate and/ or VCI FE-S Concentrate and/ or VCI UNI W-50 |
1.05 Sq.Mtr/ Sq.Mtr. content in the export product
0.017 kg/ Sq.Mtr content in the export product |
| A2996 | Dichlorvos 76% EC | 1 Litre | 1. Dichlorvos Tech. 92%
OR 1. a) Chloral b) White/ Yellow Phosphorus c) Methanol 2. Solvent C-9 (Shellsol A 100) 3. Epichlorohydrin (Stabilizer) 4. Emulsifier 5. Ortho Xylene |
1.095 kg
0.744 kg 0.240 kg 0.665 kg 0.104 kg 0.025 kg 0.093 kg 0.003 kg |
-:18:-
| A2997 | Tinopal UP Liquid (Fluorescent Brightner – 113) (Assay 22%) | 1 kg | 1. Cyanuric Chloride
2. Aniline Oil 3. Diethanolamine 4. Diamino Stilbene Disulphonic Acid OR 4. a) Para Nitro Toluene b) Caustic Soda 5. Caustic Soda Flake/ Lye 6. Soda Ash |
0.098 kg
0.049 kg 0.054 kg 0.0982 kg 0.120 kg 0.196 kg 0.069 kg 0.030 kg |
|
| A2998 | Optical Brightner – Flourescent Brightner 260 (Tinopal DMA-X) (Assay + 67%) | 1 kg | 1. Cyanuric Chloride
2. Morpholine 3. Aniline Oil 4. Diamino Stilbene Disulphonic Acid (4, 4-Diamino Stilbene- 2, 2-Disulphonic Acid) OR 4. a) Para Nitro Toluene b) Caustic Soda 5. Baykanol 6. Caustic Soda 7. Soda Ash |
0.318 kg
0.160 kg 0.165 kg 0.300 kg 0.375 kg 0.600 kg 0.020 kg 0.224 kg 0.171 kg |
|
| A2999 | 3-Methyl Anisole OR 3-Methyl Tolyl Ether (Meta Cresyl Methyl Ether) | 1 kg | 1. Meta Cresol
2. Caustic Soda Flakes |
1.087 kg
0.528 kg |
|
| A3000 | Penta Adipate Oleate | 1 kg | 1. Penta Erythritol
2. Adipic Acid 3. Oleic Acid |
0.191 kg
0.205 kg 0.790 kg |
|
-:19:-
| A3001 | D-Camphor Sulphonic Acid (DCSA) | 1 kg | 1. Natural Camphor | 2.04 kgs |
| A3002 | 3-Amino-4-Methoxy Biphenyl | 1 kg | 1. Para Phenyl Phenol (4-Hydroxy Biphenyl) | 0.882 kg |
| A3003 | Measles, Mumps and Rubella Vaccine Live, Attenuated (Freeze Dried) 5 Doses with Sterile Water for Injection | 10,00,000 Doses (2,00,000 Vials) | 1. Minimum Essential Medium (MEM) Powder with Hanks Salt, with L-Glutamine and without Sodium Bicarbonate
2. Tissue Culture Flask with cap 3. Foetal Calf Serum (Foetal Bovine Setum) Suitable for Cultivation of Human diploid Cell Line free of Mycoplasma free of Bovine Viruses |
2010 Ltr
2783 NoSr. 65.98 Ltr. |
| 4. Gelatine Food Grade
5. Sorbitol Extra pure for microbiology 6. Plastic Roller Bottles 7. Glass Vials 8. Rubber Stopper 9. Aluminium Caps/ Seals |
18.42 kgs
36.84 kgs 647 NoSr. 230000 NoSr. 220000 NoSr. 220000 NoSr. |
-:20:-
| 10. Glass Ampoules
11. Cold Chain Monitor Card 12. L-Histadine Free Base Cell Culture Tested 13. L-Alamine Cell Culture Tested 14. Tricine Cell Culture Tested 15. TC Lactalbumine Hydrolysate 16. L-Arginine Monohydrochloride 17. L-Glutamine 18. Trypsin (from Porcine Pancreas Gamma Irradiated) |
230000
367 NoSr. 0.252 kgs 0.120 kgs 0.360 kgs 0.420 kgs 0.960 kgs 0.150 kgs 0.100 kgs |
|||
| A3004 | Methyl Iodide | 1 kg | 1. Iodine | 0.970 kg |
-:21:-
Annexure “C” to the
Public Notice No. 20
Dated: 01/07/2002
ENGINEERING PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C1775 | Spacer Thrust made of 30% Glass filled Phenolic Moulding Powder | 1 kgs | 1. 30% Glass Filled Phenolic Moulding Powder | 1.05 kgs |
| C1776 | Injector (Nozzle holder) with Nozzle for diesel engine | 700 kgs (1000 NoSr.) | 1. Alloy Steel Bars/Coils to Specification AISI M2
2. Free Cutting Steel Leaded/Non-Leaded Bars/Coils to Specification EN1A/SEA 1010/EN8M 3. Spring Steel/Wire in Coil 4. Alloy Steel Bars/Coils Type 18Cr N18/SEA 3415/16Mn Cr5 5. Spring Dowel Pins MISC. ITEMS 1. Grinding Wheels/Micro Drills/Letter/Number Inscription Punches/Lopping compound (Paste / Powder) |
16 kgs
204 kgs 14.3 kgs 105 kgs Net to net Upto 3% of FOB value |
-:22:-
| C1777 | Suction Valve for Compressor | 1 No. | 1. Valve Plate
2. Spring Plates/Springs 3. Buffer Plate/ Damping Plate/ Synchronising Plate 4. JL. Nut (with or without washer) Hexagon Nut/ Castle Nut/ Split Pin 5. Locating Pin/ Parallel Pin 6. Lift Washer / Guide Ring 7. Countersunk Bolt/Centre Stud 8. Seat 9. Guard 10. locking Device 11. Unloader 12. Guide Bush 13. Actuator 14. Washer |
1 (Net to net)
16(Net to net) 2 (Net to net) 5 (Net to net) 8 (Net to net) 5 (Net to net) 1 (Net to net) 1 (Net to net) 1 (Net to net) 1 (Net to net) 1 (Net to net) 2 (Net to net) 1 (Net to net) 2 (Net to net) |
| C1778 | Discharge Valve for Compressor | 1 No. | 1. Valve Plate
2. Spring plates/Springs 3. Buffer Plate/ Damping Plate/ Cusion Plate/ Synchronising Plate 4. JL. Nut (with or without washer) Hexagon Nut/ Castle Nut/ Split Pin 5. locating Pin/ Parallel Pin 6. Lift Washer/ Guide Ring |
1 Net to net)
12 Net to net) 2 Net to net) 2 Net to net) 6 Net to net) 5 Net to net) |
-:23:-
| 7. Countersunk Bolt/ Centre Stud
8. Seat 9. Guard 10. Locking Device 11. Washer |
1 Net to net)
1 Net to net) 1 Net to net) 1 Net to net) 2 Net to net) |
|||
| C1779 | Wheel Chair Components made out of Aluminium Extrusions frames/ cross bar/ arm rest/ leg rest | 1 kg | 1. Aluminium Extruded Tubes/ Sections of relevant Size
2. Aluminium Alloy Wire |
1 kg
0.02 kg |
| C1780 | Magnet Retrieving | 1 No. | 1. Permanent Magnet Strontium Ferrite Grade in relevant dimensions and in demagnetized condition | 1 No. |
| C1781 | Magnetic Tray | 1 No. | 1. Permanent Magnet Strontium Ferrite Grade in relevant dimensions and in demagnetized condition | Net to net |
| C1782 | Bi-Metallic Dial thermometer/ Mercury in Dial Thermometer | 1 No. | 1. Nickel iron Alloy Bi-Metal Strip
2. Seamless Capillary Steel Tube OD 2 mm 3. SPDT Microswitch 4. Mercurry |
1.02 kg/kg content in the Export product
1.02 kg/kg content in the Export product Net to net 1 gm /gm content in the Export product |
-:24:-
| C1783 | CNC Lathe | 1 No. | 1. Ball Screws
2. Power Operated chuck 3. Power chucking cylinder 4. Stabilised Power supply 5. Bearings with SKF or equivalent No. 6. Couplings 7. Numerical Control System 8. Encoders 9. Connector 10. Push Button Actuator 11. Elements 12. Safety Interlock 13. Motor Protection Starter |
2 NoSr.
1 No. 1 No. 1 No. Net to net 2 NoSr. 1 No. 2 NoSr. 2 NoSr. 13 NoSr. 13 NoSr. 1 No. 10 NoSr. |
| C1784 | Pest Repellent | 1 No. | 1. Relevant Capacitor
2. Relevant Varistor 3. Relevant Triac 4. Relevant Resistors 5. Zinner 6. light Connector 7. EL Display 8. Polycarbonate Compound 9. Copper Wire 10. Copper Clad Lamination 11. Imaging 12. Solder Mask 13. Relevant Microchip |
Net to net
Net to net Net to net Net to net 1 No. (Net to net) 1 No. (Net to net) 1 No. (Net to net) 1.05 kg/kg 1.01 kg/kg 1.01 kg/kg 1.05 kg/kg 1.05 kg/kg 1 No. |
-:25:-
| C1785 | Ferro Boron Cored Wire | 1 kg (content of both inputs to be declared) | 1. Ferro Boron Powder
2. CRCA Steel Strips |
1.05 kg/kg content of Ferro Boron in the export product
1.01 kg/kg content of Steel in the export product |
| C1786 | Steel Rolls for Cold Rolling Mill | 1 kg | 1. Alloy Tools Steel round Bar conforming to AISI D3/D2 or equivalent | 1.40 kg/kg content of Steel in the Export Product |
| C1787 | Absorption Chillers of Various types (weight to be indicated) | 1 No. | 1. Lithium Bromide
2. BQ Plate 3. Copper Tube of relevant size 4. Cupro-nickel tube of Relevant size 5. Stainless Steel tube of relevant grade and relevant size 6. Absorbent Pump 7. Welding consumable and cladding strip |
Net to net basis (for use as first charge)
1.10 kg/kg content in the export product Net to net basis Net to net basis Net to net basis Net to net basis Cif value restricted to 0.1% of fob value |
-:26:-
| 8. ICAM Systems
9. Refrigerant Pump |
Net to net basis
Net to net basis |
|||
| C1788 | Electric Generator and sub-assemblies thereof | 1 No. | 1. Copper Wire / Rod
2. Copper flat/strip/bar 3. Copper Plate 4. CRNGO Steel Sheet for Rotor 5. Insulation material (cut to length) 6. Insulation material (in pieces) 7. Non Alloy Steel Plate of relevant grade |
1.01 kg/kg content in the export product
1.05 kg/kg content in the export product 1.10 kg/kg content in the export product 1.30 kg/kg content in the export product 1.03 Sq.Mtr./ Sq.Mtr. content in the export product Net to net basis with accountability clause 1.2 kg/kg content in the export product |
-:27:-
| 8. Misc.Items: Hose pipe, Hardware, Lubrication Oil, Soldering Rod, soldering foils, sealant, varnish & cleaning agent, resin & Hardner | CIF value of all these items taken together restricted to 2% of the FOB value | |||
| C1789 | Vertical Pressure Leaf Filter with accessories | 1 Unit | 1. Woven wire cloth in SS 316L
2. Linear Acting Pneumatic Piston vibrator |
1.05 Sq.Mtr./ Sq.Mtr content in the export product
1 No. on net to net basis |
| C1790 | Copper Lug (battery cable lug) | 1 No. | 1. Copper Scrap | 1.10 kg/kg content in the export product |
-:28:-
Annexure “D” to the
Public Notice No. 20
Dated: 01/07/2002
PLASTIC PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed | |
| H480 | Ethyl Acrylate Homo-polymer Emulsion having solid 35% +1% Stabilized with Emulsifier | 1 kg | 1. Ethyl Acrylate
2. Itaconic Acid |
0.327 kg
0.015 kg |
|
| H481 | Methyl Methacrylate Homo-polymer in Solid form | 1 kg | 1. Methyl Methacrylate | 1.009 kg | |
| H482 | Ethyl Acrylate and Methyl Methacrylate Copolymer Emulsion having Solid 35% +1% Stabilized by Emulsifier | 1 kg | 1. Ethyl Acrylate
2. Methyl Methacrylate 3. Methacrylic Acid 4. Methacrylamide 5. Acrylamide |
0.291 kg
0.031 kg 0.005 kg 0.005 kg 0.004 kg |
|
| H483 | Ethyl Acrylate and Methacrylic Acid Copolymer Aqueous Solution with Solid content 22% + 1% | 1 kg | 1. Methacrylic Acid
2. Ethyl Acrylate Monomer |
0.085 kg
0.132 kg |
|
| H484 | Aqueous Polyurethane Dispersion having Solid 20% + 2% | 1 kg | 1. Isophorane Di-Isocyanate
2. Dicarboxylic Acid 3. Phthalic Anhydride 4. Neopentone Glycol 5. Dimethylol propionic Acid |
0.060 kg
0.044 kg 0.030 kg 0.069 kg 0.014 kg |
|
-:29:-
| H485 | Butyl Acrylate and Ethyl Acrylate Copolymer Emulsion having Solid 40% +1% Stabilized by Emulsifier | 1 kg | 1. Butyl Acrylate
2. Ethyl Acrylate 3. Acrylamide |
0.138 kg
0.171 kg 0.003 kg |
| H486 | EVA Polymer Based Adhesive in Solid form (containing 45%+ 1% EVA, 27% + 1% Ester Gum & 20% +1% Paraffin Wax) | 1 kg | 1. Ethylene Vinyl Acetate (Solid copolymer)
2. Ester Gum 3. Paraffin Wax |
0.458 kg
0.274 kg 0.204 kg |
| H487 | Vinyl Acetate Copolymer Emulsion having Solid Minimum 54% Stabilized with Colloid | 1 kg | 1. Vinyl Acetate Monomer
2. Hydroxy Ethyl Cellulose |
0.315 kg
0.018 kg |
| H488 | Styrene and Butadiene Copolymer Emulsion with Solids 48 + 1% Stabilized by Emulsifier | 1 kg | 1. Styrene
2. Acrylic Acid |
0.221 kg
0.005 kg |
| H489 | Butyl Acrylate and Acrylonitrile Copolymer Emulsion having Solids 45% +1% Stabilized by Emulsifier | 1 kg | 1. Butyl Acrylate
2. Acrylic Acid 3. Acrylonitrile 4. Acrylamide |
0.218 kg
0.005 kg 0.200 kg 0.013 kg |
-:30:-
| H490 | Butyl Acrylate and Methyl Methacrylate Copolymer Emulsion having Solids 55%+1% Stabilized by Emulsifier | 1 kg | 1. Butyl Acrylate
2. Methyl Methacrylate 3. Acrylamide 4. Methacrylamide |
0.252 kg
0.279 kg 0.003 kg 0.010 kg |
| H491 | Ethyl Acrylate and Methacrylate Acid Copolymer Emulsion having Solids 29% +1% Stabilized by Emulsifier | 1 kg | 1. Methacrylic Acid
2. Ethyl Acrylate |
0.114 kg
0.171 kg |
| H492 | Styrene & Butyl Copolymer Emulsion with Solids 50% + 1% Stabilized with Emulsifier | 1 kg | 1. Butyl Acrylate
2. Acrylic Acid 3. Acrylamide 4. Styrene |
0.239 kg
0.012 kg 0.007 kg 0.231 kg |
| H493 | Methacrylic Acid Homopolymer Aqueous Solution with Solids 40% + 1% | 1 kg | 1. Methacrylic Acid | 0.335 kg |
| H494 | Vinyl Acetate and 2-Ethyl Hexyl Acrylate Copolymer Emulsion with Solids 56% + 1% Stabilized with Colloid | 1 kg | 1. 2-Ethyl Hexyl Acrylate
2. Vinyl Acetate Monomer 3. Hydroxy Ethyl Cellulose |
0.135 kg
0.400 kg 0.016 kg |
-:31:-
| H495 | Butyl Acrylate and Acrylonitrile Copolymer Emulsion having Solids 40% +1% Stabilized with Emulsifier | 1 kg | 1. Butyl Acrylate
2. Acrylonitrile |
0.287 kg
0.056 kg |
| H496 | Butyl Acrylate, Ethyl Acrylate and Acrylonitrile Copolymer Emulsion having Solids 40% +1% Stabilized with Emulsifier | 1 kg | 1. Acrylic Acid
2. Acrylonitrile 3. Butyl Acrylate 4. Ethyl Acrylate 5. Methyl Methacrylate 6. methacrylamide 7. Acrylamide |
0.006 kg
0.047 kg 0.136 kg 0.168 kg 0.012 kg 0.006 kg 0.002 kg |
| H497 | Acrylic Acid and Acrylonitrile Copolymer Aqueous Solution with Solids 35% + 1% | 1 kg | 1. Acrylic Acid
2. Acrylonitrile |
0.180 kg
0.103 kg |
| H498 | Ethyl Acrylate and Methacrylic Acid Copolymer Emulsion having Solids 29% +1% Stabilized with Emulsifier | 1 kg | 1. Methacrylic Acid
2. Ethyl Acrylate |
0.114 kg
0.171 kg |
| H499 | Methacrylic Acid Homopolymer Aqueous Solution with Solid content 30% +1% | 1 kg | 1. Methacrylic Acid | 0.212 kg |
-:32:-
| H500 | Butyl Acrylate and Ethyl Acrylate Copolymer Emulsion having Solids 50% +1% Stabilized by Emulsifier | 1 kg | 1. Butyl Acrylate
2. Ethyl Acrylate 3. Acrylic Acid |
0.118 kg
0.169 kg 0.013 kg |
| H501 | Hot Melt Pressure Sensitive Adhesives in Solid form containing Hydrocarbon Resin 61% + 1% & Styrene Isoprene Styrene Synthetic Rubber 26.5% + 1% | 1 kg | 1. Hydrocarbon Resin
2. Styrene Isoprene Styrene Synthetic Rubber |
0.623 kg
0.270 kg |
| H502 | Methacrylic Acid & Acrylonitrile Copolymer Aqueous Solution with Solids 20%±1% | 1 kg | 1. Methacrylic Acid
2. Acrylonitrile |
0.168 kg
0.023 kg |
| H503 | Solid Epoxy Resin (having Epoxy value between 2.1 and 2.4) | 1 kg | 1. Epichlorohydrin
2. Bisphenol-A |
0.470 kg
0.750 kg |
| H504 | Solvent Based Epoxy Resin containing 25% Xylene content (having Epoxy value between 1.5 and 2.2) | 1 kg | 1. Epichlorohydrin
2. Bisphenol-A 3. Xylene |
0.350 kg
0.560 kg 0.255 kg |
| H505 | Solid Epoxy Resin (having Epoxy value between 1.1 and 1.4) | 1 kg | 1. Epichlorohydrin
2. Bisphenol-A |
0.430 kg
0.757 kg |
| H506 | Polyester (PET) Preform | 1 kg | 1. Polyester (PET) Chips | 1.02 kg/kg content in the export product |
-:33:-
| H507 | Fragrant Polypropylene Mats | 1 MT | 1. Polypropylene Granules
2. HDPE Granules 3. PP Colour Master Batch 4. Aromatic Chemicals (Raw material for Perfumery/ Fragrances) 5. PP Mono Filament Yarn 6. Jacquard Design Cards |
770 kgs
64 kgs 188 kgs 94 kgs 32 kgs 3 NoSr. |
-:34:-
Annexure “E” to the
Public Notice No. 20
Dated: 01/07/2002
TEXTILE PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| J353 | Blended yarn (containing flax and polyester) | 1 kg | 1. Flax fibre
2. Polyester staple fibre |
1.66 kg/kg content in the export product 1.00 kg/kg content in the export product |
