(TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY PART-1-SECTION-1)

GOVERNMENT OF INDIA

MINISTRY OF COMMERCE

PUBLIC NOTICE NO. 12 (RE-2001)/1997-2002

NEW DELHI : DATED : 01/06/2000.

Attention is invited to Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time.

2. In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended.

3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/ corrections at appropriate places as mentioned in Annexure “A” to this Public Notice shall be made.

4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-

CHEMICALS AND ALLIED PRODUCTS

After the existing entry at Sr.No.A-2428, the new entries from Sr.No.A-2429 to A-2438 shall be added as per Annexure “B” to this Public Notice.

ENGINEERING PRODUCTS

After the existing entry at Sr.No.C-1530, the new entries from Sr.No.C-1531 to C-1537 shall be added as per Annexure “C” to this Public Notice.

5. This issues in Public interest.

Sd/-

(N.L. LAKHANPAL)

DIRECTOR GENERAL OF FOREIGN TRADE

(S. L. GUPTA)

DY. DIRECTOR GENERAL OF FOREIGN TRADE

FOR DIRECTOR GENERAL OF FOREIGN TRADE

Annexure “A” to the

Public Notice No. 12

Dated: 01/06/2000

AMENDMENTS/CORRECTIONS

Sr.

No.

Page

No.

Reference

Amendments/Corrections

1

2

3

4

1.

174

Chemicals & Allied Products

Sr.No.A1412

The norms covered by this entry shall be substituted by the following:-

Sr.No.

Export Item

Qty.

Import Item

Qty Allowed

A1412

N(1,3 Dimethyl Butyl) N Phenyl-Para Phenylene Diamine (Minimum 95%)

1 kg

1.Aniline

2.MIBK(Methyl Isobutyl Ketone)

3.Para Nitro Chloro Benzene

4.Formic Acid(85%)

5.Potassium Carbonate

6.Platinum Catalyst

0.463 kg

0.444 kg

0.761 kg

0.354 kg

0.459 kg

0.0002 kg

2.

306

Chemicals & Allied Products

Sr.No.A2299

The description of import item Sr. No. 1 shall be amended to read as under:-

“L-Glutamine and without Sodium Bicarbonate.”

3.

307

Chemicals & Allied Products

Sr.No.A2301

The quantity of export item shall be corrected to read as under:-

“10,000 Vials”

4.

438

Engineering Product

Sr.No.C169

After import item No. 7, the following item (with quantity) shall be added:-

8. Aluminium Sheet/ – 1.05 kg/kg

CRCA Sheet (for content in

Blades of Fan) (only the export

The relevant item used product”.

in the export to be

allowed)

5.

589

Engineering Product

Sr.No.C697

After import item No.1, the following alternative item (with quantity) shall be added:-

“OR

Aluminium Wire – 36.225 kg.”

(Not below 3mm)

6.

589

Engineering Product

Sr.No.C698

After import item No.1, the following alternative item (with quantity) shall be added:-

“OR

Aluminium Wire – 5.999 kg.”

(Not below 3mm)

7.

607

Engineering Product

Sr.No.C829

1. The description of import item No.1 (with quantity) shall be amended to read as under:-

“1. C.R.S.S. Strip – 988 kgs.

OR

H.R.S.S. Strip – 1522 kgs.”

2. At the end of this entry the following Note shall be added:-

Note:- “In so far as H.R.S.S. is concerned, the input norm as above shall be valid for a period of one year viz. upto 31.3.2001 only after which it shall be reviewed”.

8.

615

Engineering Product

Sr.No.C876

1.Import item No. 5 alongwith quantity shall be deleted.

2.After import item No. 4 the following items (with quantity) shall be added:-

“5. Polyox WSRN 750 – 44 kg.

6. Polyox Coagulant – 44 kg.

7. General purpose – 38 kg.”

Polystyrene

3.The note below this norm shall be amended to read as under:-

Note :- “1. The items at S.No. 5, 6 and 7 above shall be allowed only if the product exported is with Lubra Strip”.

9.

712

Engineering Product

Sr.No.C1315

The description of import item No. 1 (without any change in quantity) shall be amended to read as under:-

“Inco`s’ Nickel Rounds/ Pellets Unwrought & Unalloyed.”

10.

757

Engineering Product

Sr.No.C1503

The description of import item No. 1 (alongwith quantity) shall be amended to read as under:-

“1.Copper – 1.06 MT/MT

concentrate of copper content in the

export product

OR

Copper Scrap – 1.075 MT/MT Copper contents in the export product

Blister – 1.04 MT/MT copper content in the export product.”

11.

805

Food Product

Sr.No.E51

After import item No. 3 the following items (with quantity) shall be added:-

“4. Kraft Paper – Net +1%

wastage

5.Adhesive (Powder – 0.005 gm

form) (approx.)

6.Printing Ink – 0.00005 gm.”

12.

830 – 831

Leather Product

Sr. No.G18

1.After import item No.7, the following item (with quantity) shall be added:-

“8. Leather Chemicals – As per Leather chemicals prescribed in G-7, on pro-rata Basis”.

2.At the end of this entry the following foot-note shall be added:-

“Note: 2. For import of Leather Chemicals (Item No. 8 ) the requirement of Finished Leather per number of Glove is 0.50 sq.ft.”.

13.

873

Plastic Product

Sr.No.H-90

After import item No. 1 the following additional item with quantity shall be added:-

“2. Trigonox 101 (2,5 Bis – 0.007 kg/kg”

tert-butylperoty-2,5-dimethyl hexane,

minimum 92% in solvent)

14.

951

Sports Goods

Sr.No.I-23

1.The description of export item (without change in quantity) shall be amended to read as under:-

“Head Guard made out of PVC/PU leather cloth”

2.The description of import item (without change in quantity) shall be amended to read as under:-

“Relevant PVC/PU Leather Cloth”.

15.

1

GENERAL NOTES FOR ALL EXPORT PRODUCTS GROUP

“In the general notes, note No. 4 shall be deleted”.

Annexure “B” to the

Public Notice No. 12

Dated: 01/06/2000

CHEMICALS AND ALLIED PRODUCTS

Sr.No.

Export Item

Qty.

Import Item

Qty. Allowed

A2429

Tris Nonyl Phenyl Phosphite

1 kg

1.Nonyl Phenol

2.Phosphorous Trichloride

1.066 kg

0.222 kg

A2430

Cis-2-(2,4- Dichlorophenyl)-2-(1-H-Imidazole-1,-yl-methyl-1,3-Dioxolan-4-yl)methyl-P-Tolyl sulphonate

OR

Cis-Tosylate

1.2,4 Dichloro Acetophenone

2.Imidazole

3.Toluene

4.Methanol

5.Methyl Isobutyl Ketone

3.07 kg

1.38 kg

6.41 kg

9.08 kg

0.74 kg

A2431

Cyanoacetamide

1 kg

1.Monochloro Acetic Acid

2.Sodium Cyanide

3.Acetone

4.Methyl Isobutyl Ketone

3.75 kg

1.36 kg

1.75 kg

1.36 kg

A2432

Reactive Polyamide Resin with Free Amino Groups and Viscosity at 250C 125 to 175 poises (SYNPOL-140)

1 kg

1.Domer Acid

2.Triethylene Tetramine

3.Industrial Mono Carboxylic Fatty Acid

0.684 kg

0.443 kg

0.029 kg

A2433

Reactive Polyamide Resin with High Amine value (340-400) Long Pot Life and Viscosity at 250C 2 to 6 poises (SYNPOL-160)

1 kg

1.Industrial Monocarboxylic Fatty Acid

2.Triethylene Tetramine

0.600 kg

0.440 kg

A2434

Slow Curing Solvent free aromatic polyamine Epoxy adduct (Epoxy Resin Hardner-340)

Viscosity –50-90

Poises

Pot life – 8-10 hrs.

1 kg

1.Aniline

2.Epoxy Resin

3.Dibutyl Phthalate

0.470 kg

0.384 kg

0.360 kg

A2435

Fast Curing Solvent free aromatic polyamine Epoxy adduct (Epoxy Resin Hardner-350)

Viscosity –150-210

Poises

Pot life – 20-30

Minutes

1 kg

1.Aniline

2.Epoxy Resin

3.Dibutyl Phthalate

0.442 kg

0.146 kg

0.338 kg

A2436

Polyvinyl Butyral Resin

1 kg

1.Poly Vinyl Alcohol

2.N-Butyraldehyde

0.710 kg

0.429 kg

A2437

BOPP Bags with/without Adhesives Tape

1 kg

1.BOPP Film (relevant thickness and grade)

2.Double side self-adhesive Tape

1.02 kg/kg content in the export product

1.02 Sq. mtr./ Sq. mtr. content in the export product

Note:- The item No. 2 viz. Double side self-adhesive Tape shall be permitted for import only when the product is exported with adhesive tape.

A2438

Reactive Polyamide Resin with High Amine Value (380-420) Rapid curing and Viscosity at 25O : 10 to 15 poises (SYNPOL-150)

1 kg

1.Domer Acid

2.Triethylene Tetramine

3.Industrial Mono- carboxylic Fatty Acid

0.236 kg

0.431 kg

0.389 kg

Annexure “C” to the

Public Notice No. 12

Dated: 01/06/2000

ENGINEERING PRODUCTS

Sr.No.

Export Item

Qty.

Import Item

Qty Allowed

C1531

Pneumatic Tools- Hand drills without Muffler with chuck ¾” x 3 ¾” (19mm x 95.2mm)

1No

1.Relevant Inlet bushing

2.Relevant Hose tail

3.Relevant Throttle lever

4.Relevant Rear Valve seat

5.Relevant Front Valve Seat

6.Relevant Valve

7.Relevant Handle bare

8.Relevant Throttle Valve bushing

9.Relevant Bolt

10.Relevant Pawl

11.Relevant Ratchet Ring

12.Relevant Cylinder

13.Relevant Piston

14.Relevant Cylinder bushing

15.Relevant Retainer Plate

16.Relevant Chuck

17.Relevant chuck sleeve

18.Relevant front head

19.Relevant Plunger shifter

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

2 Nos.

2 Nos.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1.Relevant shifter sleeve

2.Relevant Retainer Sleeve

1 No.

1 No.

Note:- The import of components shall be allowed on net to net basis with accountability clause.

C1532

Pneumatic Tools- Hand drills with Muffler and shifter sleeve with chuck ¾” x 3 ¾” (19mm x 95.2mm)

1No.

1.Relevant Inlet bushing

2.Relevant Hose tail

3.Relevant Throttle lever

4.Relevant Rear Valve seat

5.Relevant Front Valve Seat

6.Relevant Valve

7.Relevant Handle bare

8.Relevant Throttle Valve bushing

9.Relevant Bolt

10.Relevant Pawl

11.Relevant Ratchet Ring

12.Relevant Cylinder

13.Relevant Piston

14.Relevant Cylinder bushing

15.Relevant Retainer Sleeve

16.Relevant Retainer Plate

17.Relevant Chuck

18.Relevant Chuck Sleeve

19.Relevant Front head

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

2 Nos.

2 Nos.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

20.Relevant Muffler

21.Relevant Plug-Muffler

22.Relevant Button-rotation release

23.Relevant Wash er-Clamping

24.Relevant Plunger Shifter

25.Relevant Shifter Sleeve

26.Relevant Depth gauge

27.Relevant dead handle

1 No.

1 No.

2 Nos.

1 No.

1 No.

1 No.

1 No.

1 No.

Note:- The import of components shall be allowed on net to net basis with accountability clause.

C1533

Pneumatic Tool- Concrete Vibrator with 2 ½ (inch) Head

1No.

1.Relevant Live Air Handle Cap

2.Relevant Plug Handle

3.Relevant Live Air Handle cover

4.Relevant Sleeve

5.Relevant Hose Nipple

6.Relevant `Band-It’ Clamp

7.Relevant Intake Hose

8.Relevant Shell & Nose Cap

9.Relevant End Cap

10.Relevant Eccentric Shaft Nut Assembly

1 No.

1 No.

1 No.

1 No.

2 Nos.

2 Nos.

1 No.

1 No.

1 No.

2 Nos.

11.Relevant Upper end Plate

12.Relevant Eccentric Weight

13.Relevant Eccentric Shaft

14.Relevant Lower end Plate

15.Relevant Hose Clamp (Band-It)

16.Relevant Swivel Nipple

17.Relevant Lock wire

18.Relevant Hose Clamp(Band-It)

19.Relevant Hose Nipple

20.Relevant Exhaust Swivel Collar

21.Relevant Live air hose

22.Relevant Strainer

23.Relevant Oiler body

24.Relevant Live air handle stem & Bushing

25.Relevant Exhaust Hose

1 No.

1 No.

1 No.

1 No.

3 Nos.

1 No.

1 No.

2 Nos.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

Note:- The import of components shall be allowed on net to net basis with accountability clause.

C1534

Pneumatic Tool

1 No.

1.Relevant Valve

2.Relevant retainer

3.Relevant Piston

4.Relevant Spring

5.Relevant Cylinder

6.Relevant Clamp

7.Relevant Muffler

8.Relevant Muffler Plug

9.Relevant Housing

10.Relevant Pin

11.Relevant Air Tube

12.Relevant Bushing

13.Relevant Shaft

14.Relevant Button

15.Relevant Bush

16.Relevant Bearing

17.Relevant Sleeve

18.Relevant Casting

19.Relevant Chain Link Lead

20.Relevant throttle Valve

21.Relevant Handle

1 No.

1 No.

1 No.

2 Nos.

1 No.

1 No.

1 No.

1 No.

1 No.

2 Nos.

1 No.

2 Nos.

1 No.

1 No.

1 No.

2 Nos.

1 No.

1 No.

1 No.

1 No.

1 No.

Note:- The import of components shall be allowed on net to net basis with accountability clause.

C1535

Pneumatic Tool- Rock Drill

1 No.

1.Relevant Handle Bracket (made of steel Gr. SAE 8620)

2.Relevant Handle Bolt (made of steel Gr. EN 9)

3.Relevant Air inlet swivel (made of steel Gr. EN 24)

4.Relevant Air inlet swivel nut (made of steel Gr. SAE 8620)

5.Relevant Blower Valve (made of steel Gr. SAE 8620)

6.Relevant Thru Bolt (made of steel Gr. EN 24)

7.Relevant Front head (made of steel Gr. SAE 8620)

8.Relevant Retainer (made of steel Gr. SAE 8620)

9.Relevant Retainer trunnion (made of steel Gr. SAE 8620)

10.Relevant Cylinder (made of steel Gr. SAE 8620)

11.Relevant Back head (made of steel Gr. SAE 8620)

1 No.

1 No.

1 No.

1 No.

1 No.

2 Nos.

1 No.

1 No.

2 Nos.

1 No.

1 No.

12.Relevant Throttle valve handle (made of steel Gr. SAE 8620)

13.Relevant Ratchet ring (made of steel Gr. SAE 8620)

14.Relevant Valve case (made of steel Gr. EN 354)

15.Relevant Blower valve bushing (made of steel Gr. SAE 8620)

16.Relevant Rifle bar nut (Bronze) (made of steel Gr. SAE 8620)

17.Relevant Piston (made of steel Gr. EN 355)

18.Relevant Bushing Cylinder (made of steel Gr. SAE 8620)

19.Relevant Air tube (made of steel Gr. SAE 8620)

20.Relevant Chuck rotation nut (made of steel Brass)

21.Relevant Chuck Sleeve (made of steel Gr. SAE 8620)

22.Relevant Chuck (made of steel Gr. SAE 8620)

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

23.Relevant Rifle bar (made of steel Gr. SAE 8620)

24.Relevant Valve (made of steel Gr. SAE 8620)

25.Relevant Valve Guide Bushing (made of steel Gr. SAE 8620)

26.Relevant Bushing-water valve (made of steel Brass)

27.Relevant Throttle Valve (made of steel Gr. SAE 8620)

1 No.

1 No.

1 No.

1 No.

1 No.

Note:- The import of components shall be allowed on net to net basis with accountability clause.

C1536

Pneumatic Tool- Rivetting Cutter (buster) 8″ to 11″ Cylinder

1 No.

1.Relevant Throttle valve (made of steel Gr. SAE8620)

2.Relevant Throttle tube (made of steel Gr. ENIA)

3.Relevant Throttle lever (made of steel Gr. EN8)

4.Relevant Valve case lid (made of steel Gr. SAE8620)

5.Relevant Valve (made of steel Gr. EN24)

1 No.

1 No.

1 No.

1 No.

1 No.

6.Relevant Valve case (made of steel Gr. SAE8620)

7.Relevant Handle (made of steel Gr. EN8)

8.Relevant Spring clip (Lock collar) (made of steel Gr. EN8)

9.Relevant Lock collar (made of steel Gr. EN8)

10.Relevant Cylinder (made of steel Gr. EN24)

11.Relevant Piston (made of steel Gr. T118 CR2)

12.Relevant Lower sleeve (made of steel Gr. EN31)

13.Relevant Upper sleeve (made of steel Gr. EN31)

14.Relevant Retainer sleeve (made of steel Gr. EN24)

15.Relevant Exhaust Deflector (made of steel Gr. SAE1070)

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

Note:- The import of components shall be allowed on net to net basis with accountability clause.

C1537

Regulators with rotating outlet for LPG cylinder

1 No. (227 gms)

1. Zinc

245 gms.

More Under DGFT

Posted Under

Category : DGFT (3792)
Tags : DGFT Notifications (3713)

Leave a Reply

Your email address will not be published. Required fields are marked *