Notification No.106/1995-Customs, Dated: 02/06/1995

GOVERNMENT OF INDIA
MINISTRY OF FINANCE
(DEPARTMENT OF REVENUE)

Notification No. 106/95-Cus.

dated 2-6-1995

Special Value Based Advance Licence – for export of readymade garments under Scheme A – Import

In exercise of the powers conferred by sub-section (1) of section 25 of the Customs Act, 1962 (52 of 1962), the Central Government, being satisfied that it is necessary in the public interest so to do, hereby exempts materials imported into India against Special Value Based Advance Licence (hereinafter referred as the said licence) for the export of readymade garments (other than leather garments) issued under Scheme “A” contained in Appendix XXII-A of the Handbook of Procedure 1 April, 1992 – 31 March, 1995, Vol. I (Revised Edition April, 1995) published in terms of paragraph 53 of the Export and Import Policy by the Government of India in the Ministry of Commerce vide Public Notice No. 292/(PN)/92-97, dated the 30th April, 1995, from the whole of the duty of Customs leviable thereon which is specified in the First Schedule to the Customs Tariff Act, 1975 (51 of 1975) and from the whole of the additional duty leviable thereon under section 3 of the said Customs Tariff Act, subject to the following conditions, namely.

(1) Materials imported are covered by a Value Based Duty Exemption Entitlement Certificate (hereinafter referred to as the said certificate) issued by the Licensing Authority in the form specified in the Schedule annexed to this notification;

(2) That the importer, at the time of clearance of the imported materials,

(a) produces the said licence and the said certificate for debit by the proper officer of the Customs;

(b) Omitted.

(c) executes a bond with such surety or security and in such form and for such sum as may be specified by the Assistant Commissioner of Customs or Deputy Commissioner of Customs binding himself to pay on demand, an amount equal to the duty leviable on the imported materials but for the exemption contained herein in respect of which the conditions specified in this notification have not been complied with together with interest at the rate of 24% per annum from the date of clearance of the materials;

(3) that the imports and exports are undertaken through the same port, airport or inland container depot which shall be one of the sea ports at Bombay, Calcutta, Cochin, Kandia, Mangalore, Marmagao, Madras, Nhava Sheva, Paradeep, Tuticorin and Visakhapatnam or the airports at Ahmedabad, Bangalore, Bombay, Calcutta, Coimbatore, Delhi, Hyderabad, Jaipur, Madras, Srinagar, Trivandrum and Varanasi or the inland container depots at Bangalore, Coimbatore, Delhi, Gauhati, Hyderabad, Kanpur, Ludhiana, Moradabad, Pimpri (Pune) and Pitampur (Indore):

Provided that the Commissioner of Customs may by special order and subject to such conditions as may be specified by him, permit import and export through any other sea port, airport or Inland Container Depot or through a land customs station;

(4) That export obligation is discharged within the period specified in the said certificate or within such extended period as may be granted by the Licensing Authority by exporting goods manufactured with the use of materials imported in terms of this notification and the importer produces the said certificate together with evidence of discharge of export obligation to the satisfaction of the Assistant Commissioner of Customs or Deputy Commissioner of Customs within a period of thirty days of the expiry of period allowed for fulfilment of export obligation or within such extended period as the said Assistant Commissioner of Customs or Deputy Commissioner of Customs may allow;

(5) The exempt materials shall be utilised only for the discharge of export obligation and no part thereof shall be disposed of or utilised in any other manner :

Provided that after discharge of export obligation in full, the exempt materials may be utilised by the importer in his own factory for manufacture of any other goods.

Explanation. – In this notification, –

(i) “Export and Import Policy” means Export and Import Policy 1 April, 1992 – 31 March, 1997 (Revised Edition. March 1995) published vide notification of Government of India in the Ministry of Commerce Notification No. 1(RE-95)/92-97, dated the 31st March, 1995.

(ii) “Licensing Authority” means the Director General, Foreign Trade appointed under the Foreign Trade (Development and Regulation) Act, 1992 (22 of 1992) or an officer authorised by him to grant a licence under the said Act;

(iii) “Materials” means –

(a) fabrics to be actually used in the manufacture of garments to be exported as specified in Part E, under the heading “II. EXPORT”, of the said certificate; and

(b) trimmings and embellishments, not exceeding 25% of the value of fabrics actually imported or 20% of the CIF value of licence, whichever is more, namely.

1. Buckles, hooks and bars.

2. Collarstays, Collar patties, butterfly, shoulder pads and other garment stays including plastic stays.

3. Paper patterns/plastic patterns.

4. Polyester button blanks, polyester buttons, pearl buttons, plastic buttons, chalk buttons, horn buttons, metal buttons.

5. Lables including woven, printed stickers, stone stickers, self-adhesive metal labels, rubberised labels and woven tapes.

6. Studs.

7. Tags, Tag guns, tag gun needles.

8. Vapoprint transfer papers.

9. Thermoplastic transfer papers.

10. Fusible embroidery motifs or prints.

11. Elastic cloth in running length.

12. Laces.

13. Lining and interlining materials.

14. Sewing thread including all types of embroidery threads.

15. Elastic tape and webbing (including heat resisting rubber tape) and book tapes.

16. Polywadding.

17. Buttons.

18. All types of fasteners including snap fasteners and press fasteners.

19. Zip fasteners (slide fasteners).

20. Badges including embroidered badges.

21. Elastic bands.

22. Stones, sequins and beads required for embroidery.

23. Quilted wadding.

THE SCHEDULE Value
based duty exemption entitlement certificate
SPECIAL SCHEME A FOR READYMADE GARMENTS (OTHER THAN LEATHER GARMENTS)

I. IMPORT

(This consists of….. Pages)
Sl. No……. (IMP) Date of issue…..
Port of Registration Issued to
……………………………………………………………………………….. (name and full address of
…………………………………………………………………………………the importer)

Materials imported against Licence No….. dated….. issued by……. to the above importer and covered by the list of materials specified under Part “C” of this Certificate would be eligible for exemption from customs duties subject to the conditions specified in the notification of the Government of India, Ministry of Finance (Department of Revenue) No. 106/95-Customs, dated the 2nd June, 1995.

The importer shall make the exports in terms of the said Notification within …… months from the date of issue of the said licence.

A Bond in terms of the said notification shall be executed before clearance of the goods from the Customs.

PART – A

Names and addresses of the factories where the resultant products for export are manufactured.

PART-B

Names and addresses of factories where the ancillaries to the resultant products for export are manufactured.

PART -C
List of items of import

–

Total value: =

PART -D
Particulars of import of materials

–

(Parts E and F figure in the Export Part of this DEEC) PART -G

Duties paid on materials in respect of which the conditions of said notification are not complied with

–

II. EXPORT

(This consists of….. Pages)
Sl. No…….. (EXP) Date of issue ….
Port of Registration………..
Issued to
……………………………………………………………………………………(Name and full address
……………………………………………………………………………………. of the importer)
…………………………………………………………………………………….

Materials imported against Licence No…….. dated….. issued by…… to the above importer and covered by the list of materials specified under Part “C” of this certificate would be eligible for exemption from customs duties subject to the conditions specified in the notification of the Government of India, Ministry of Finance Department of Revenue No. 106/95-Customs, dated the 2nd June, 1995.

The importer shall make the exports in terms of the said Notification within ……………. months from the date of issue of the said licence.

A Bond in terms of the said notification shall be executed before clearance of the goods from the Customs.

PART – A

Names and addresses of the factories where the resultant products for export are manufactured.

PART -B

Names and addresses of factories where the ancillaries to the resultant products for export are manufactured.

(Parts C and D figure in the Import Part of this DEEC)

PART -E
Resultant products

–

PART-F
Particulars of exports

–

PART -H

Statement of Imports and Exports made
Type of Licence ……..                                 Licence No……….                                         Date ………..
…………………………………………..               ………………………………………                       ………………………………..
…………………………………………..               ………………………………………                       ……………………………….

Details of Imports made

Details of Exports made

1. I/We hereby declare that the information given in this statement is correct.

2. Export goods were manufactured using materials imported under this certificate.

3. Duties on materials not used in the export product have been paid as per details in Part G.

Certificate by Chartered Accountant/Cost Accountant

I have examined the applicant firm”s actual imports and exports as given above and find them as correct.