(TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY PART-I-SECTION-1)
GOVERNMENT OF INDIA
MINISTRY OF COMMERCE & INDUSTRY
DEPARTMENT OF COMMERCE
PUBLIC NOTICE NO. 26 /2004-09
NEW DELHI : DATED : 23/11/2004
In exercise of the powers conferred under Paragraph 2.4 of the Foreign Trade Policy, 2004-09 and Paragraph 1.1 of Handbook of Procedures (Vol.1), the Director General of Foreign Trade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.
2. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, (Vol.2) 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure “A” to this Public Notice are made.
3. In the statement of Standard Input Output Norms, following additions are made at appropriate places as mentioned below:-
CHEMICALS AND ALLIED PRODUCTS
After the existing entry at Sr.No.A-3421, new entries at Sr. No. A-3422 to A-3470 are added as per Annexure “B” to this Public Notice.
ENGINEERING PRODUCTS
After the existing entry at Sr.No.C-1994, new entries at Sr. No. C-1995 to C-2006 are added as per Annexure “C” to this Public Notice.
This issues in public interest.
Sd/-
( K. T. CHACKO )
DIRECTOR GENERAL OF FOREIGN TRADE
(S.B.S.REDDY)
Jt. DIRECTOR GENERAL OF FOREIGN TRADE
(F.No.01/87/171/00002/AM04/DES-VIII)
-:3:-
Annexure “A” to the
Public Notice No. 26
Dated: 23/11/2004
AMENDMENTS/CORRECTIONS
| Sr.
No. |
Page
No. |
Reference | Amendments/Corrections | |
| 1 | 2 | 3 | 4 | |
| 1. | 38 | Chemical & Allied Product
Sr.No.A-175 |
The quantity of import item at Sr. 1(iii), is amended to read as under:-
“2.45 kg/kg” |
|
| 2. | 38 – 39 | Chemical & Allied Product
Sr.No.A-176 |
The quantity of import item at Sr. 1(c), is amended to read as under:-
“2.79 kg/kg” |
| 3. | 3 | Chemical & Allied Product
Sr.No.A-1030 (amended vide Public Notice No. 58 Dated:12.04.2004) |
The description of import item at Sr. No. 1, the input word “Petroleum Coke” (without any other change) is amended to read as under:-
“Raw Petroleum Coke” |
| 4. | 3 | Chemical & Allied Product
Sr.No.A-1050 (amended vide Public Notice No. 58 Dated:12.04.2004) |
The description of import item at Sr. No. 1, the input word “Petroleum Coke” (without any other change) is amended to read as under:-
“Raw Petroleum Coke” |
| 5. | 146 | Chemical & Allied Product
Sr.No.A1057 |
The norm covered by this entry is substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1057 | Resin bonded Silicon Carbide Crucibles of various shapes & sizes | 1 kg | 1. Silicon Carbide
2. Graphite 3. Ferro silicon 4. Aluminium Oxide |
0.369Kg.
0.276Kg. 0.115Kg. 0.075Kg. |
-:4:-
| 5. Borax Anhydrous
6. Ball Clay 7. Hexamine 8. Phenol Formaldehyde Resin of relevant specification |
0.033Kg.
0.015Kg. 0.009Kg. 0.117Kg. |
| 6. | 175 | Chemical & Allied Product
Sr.No.A-1457 |
The norm covered by this entry is substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1457 | Para Chloro BenzylChyanide (ParaChloro PhenylAcetonitrile or 4Chloro Benzyl Cyanide) | 1 kg | 1. Para Chlor Toluene
OR Chloride 2. Sodium Cyanide 3. Azobis IsoButyronitrile |
1.180 kg
1.282 kg 0.410 kg 0.005 kg |
| 7. | 4 | Chemical & Allied Product
Sr.No.A1944 (amended vide Public Notice No. 50 Dated:16.02.2004) |
The quantity of import item at Sr. No. 1, is amended to read as under:-
“1.45 kg/kg” |
| 8. | 290 | Chemical & Allied Product
Sr.No.A2268 |
The description of export item is amended to read as under:-
“Geranyl Nitrile (Minimum Purity 94%)” |
| 9. | 307 | Chemical & Allied Product
Sr.No.A2397 |
The norm covered by this entry stands deleted. |
-:5:-
| 10. | 328 | Chemical & Allied Product
Sr.No.A2561 |
The quantity of import item at Sr. No.3, is amended to read as under:-
“0.03 kg/kg” |
| 11. | 333 | Chemical & Allied Product
Sr.No.A2609 |
The description of import item at Sr. No.1, is amended along with quantity to read as under:-
“1. Citric Acid Monohydrate – 0.70 kg OR Citric Acid Anhydrous – 0.64 kg” |
| 12. | 36 | Chemical & Allied Product
Sr.No.A3167 (amended vide Public Notice No.03 Dated:31/03/2003) |
After the description of import item atSr. No. 2, the following alternative import items (with quantity) is added:-
“OR Di Methyl Carbonate – 0.8 kg/kg” |
| 13. | 5 | Chemical & Allied Product
Sr.No.A3237 (amended vide Public Notice No.77 Dated:26/08/2004) |
The description of export item, is amended to read as under:-
“Flush Cyan for Printing Ink (40+/-1% Pigment and 34 +/-1% Solid Resin” |
| 14. | 19 | Chemical & Allied Product
Sr.No.A-3244 (amended vide Public Notice No. 27 Dated:06.10.2003) |
After the description of import item at Sr. No. 4, the following alternative import items (with quantity) shall be added:-
“OR 1. Pivalic Acid (97%Min) – 1.15 kg 2. Thionyl Chloride – 1.00 kg 3. Caustic Soda (100% Basis) – 0.926 kg” |
-:6:-
| 15. | 16 | Chemical & Allied Product
Sr.No.A3313 (amended vide Public Notice No.58 Dated:12/04/2004) |
The norm covered by this entry is substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3313 | Para Chloro Benzyl Cyanide (ParaChloro PhenylAcetonitrile OR 4Chloro Benzyl Cyanide) | 1 kg | 1. Para ChloroTolulene
OR Para Chloro Benzyl Chloride |
1.180 Kg.
1.282 Kg. |
| 16. | 1 | Chemical & Allied Product
Sr.Nos. (Notified vide Public Notice No.11 Dated:01.10.2004) |
On page No. 1 of the said Public Notice, the numbering of the Standard Input Output Norms entries is corrected to read as under:-
“After the existing entries at Sr. No. A3388, New Entries At. Sr. No. A-3389 to A-3421 are added as per Annexure “B” to this Public Notice” |
| 17. | 503 – 504 | Engineering Product
Sr.No.C171 |
The norm covered by this entry is substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C171 | Complete Ceiling fan (56″) with or without Metal Blades and regulator | 1 No. | 1. Super EnamelledCopper Wire/ Copper Rod
2. CRNGO Sheets/ Coils 3. Aluminium Alloy 4. Kraft Paper 5. Polypropylene 6. M.S. Sheet 7. Ball bearing/Bush 8. Capacitor |
380 gm
3600 gm 1500 gm 1200 gm 1000 gm 150 gm 250 gm 2 Nos. Net to net |
-:7:-
| 9. Aluminium Sheet/ CRCA Sheet/Aluminium Alloy (for Blades and False Cover of Fan)
(Only the relevant item used in the export to be allowed) [to be permitted only in such cases where Blades/False Cover are also required to be exportedalongwith export product] 10. Regulator [to be allowed only in such cases where the same is required to be exportedalongwith the export product] 11. MS/GI Pipe 12. MS Bright Bar |
1.05 kg/ kg content in the export product.
1 No. 1.02 Metre/Metre content in export product 1.05 kg/kg content in the export product. |
| 18. | 15 | Engineering Product
Sr.No.C220 (amended vide Public Notice No.44 Dated:18/10/2002) |
The description of import item at Sr. No. 1, (with quantity) is substituted to read as under:-
“1. a) Angles of relevant – 1.02 kg/kg grade of Steel content in export product |
-:8:-
| OR
Billets of relevant – 1.045 kg/kg Grade of Steel content in export product b) Plates of relevant – 1.05 kg/kg grade of Steel content in export product OR Slabs of relevant – 1.075 kg/kg grade of Steel content in export product” |
| 19. | 16 | Engineering Product
Sr.No.C474 (amended vide Public Notice No.03 Dated:31/03/2003) |
The norm covered by this entry is substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C474 | Electrolytic Tin Plate | 1 kg | 1. Mild Steel Cold Rolled Wide Coil (Black Plate in Coil) | 1.006 kgs |
| Note : This norm is made effective retrospectively from 06.11.2002. | ||||
| 20. | 623 | Engineering Product
Sr.No.C565 |
The norm covered by this entry stands deleted. |
| 21. | 625 – 626 | Engineering Product
Sr.No.C593 |
The description of import item at Sr. No. 1 (with quantity) is amended to read as under:-
“Non-Alloy HR Coils/Plates – 1.05 MT/MT content in the export product” |
-:9:-
| 22. | 648 | Engineering Product
Sr.No.C755 |
The norm covered by this entry stands deleted. |
| 23. | 648 | Engineering Product
Sr.No.C756 |
The norm covered by this entry stands deleted. |
| 24. | 648 | Engineering Product
Sr.No.C757 |
The norm covered by this entry stands deleted. |
| 25. | 649 | Engineering Product
Sr.No.C758 |
The norm covered by this entry stands deleted. |
| 26. | 649 | Engineering Product
Sr.No.C759 |
The norm covered by this entry stands deleted. |
| 27. | 649 | Engineering Product
Sr.No.C760 |
The norm covered by this entry stands deleted. |
| 28. | 649 | Engineering Product
Sr.No.C761 |
The norm covered by this entry stands deleted. |
| 29. | 649 | Engineering Product
Sr.No.C762 |
The norm covered by this entry stands deleted. |
| 30. | 649 | Engineering Product
Sr.No.C763 |
The norm covered by this entry stands deleted. |
| 31. | 649 | Engineering Product
Sr.No.C764 |
The norm covered by this entry stands deleted. |
| 32. | 649 | Engineering Product
Sr.No.C765 |
The norm covered by this entry stands deleted. |
| 33. | 649 | Engineering Product
Sr.No.C766 |
The norm covered by this entry stands deleted. |
-:10:-
| 34. | 755 | Engineering Product
Sr.No.C1289 |
The description of import item at Sr. No. 1 (with quantity) is amended to read as under:-
“Non-Alloy HR Coils/Plates – 1.05 MT/MT content in the export product” |
| 35. | 755 | Engineering Product
Sr.No.C1290 |
The description of import item at Sr. No. 1 (with quantity) is amended to read as under:-
“Non-Alloy HR Coils/Plates – 1.05 MT/MT content in the export product” |
| 36. | 756 | Engineering Product
Sr.No.C1291 |
The description of import item at Sr. No. 1 (with quantity) is amended to read as under:-
“Non-Alloy HR Coils/Plates – 1.05 MT/MT content in the export product” |
| 37. | 756 | Engineering Product
Sr.No.C1292 |
The description of import item at Sr. No. 1 (with quantity) is amended to read as under:-
“Non-Alloy HR Coils/Plates – 1.05 MT/MT content in the export product” |
| 38. | 797 | Engineering Product
Sr.No.C1480 |
1. In the description of export item the word “Semi Automatic” stands deleted.
2. The quantity of import items at Sr. Nos. 16 & 17 is amended to read as under:- “16. 1.04 kg/kg content in export product” “17. 1.04 kg/kg content in export product” |
-:11:-
| 3. After the description of import item at Sr. No. 17, the following additional inputs (with quantity) are added:-
“18. Galvanized Precoated – 1.04 Kg./Kg Steel Sheet content in export product 19. High Impact Polystyrene – 1.04 Kg./Kg content in export product 20. Aluminium Ingots – 1.04 Kg./Kg content in export product 21. Styrene Acrylo Nitrile – 1.04 Kg./Kg content in export product 22. Polyethylene Resin – 1.04 Kg./Kg content in export product 23. Ethylene Vinyl Acetate – 1.04 Kg./Kg content in export product 24. Polyacetal GC25 – 1.04 Kg./Kg content in export product 25. Polyester band – Net to net 26. Nylon Cloth for – Net to net Capicitor Cover 27. S.S. Sheet for flat – Net to net spring 28. Relevant insulated – 1.01 metre/ metre Copper Wire 0.5 mm content in dia export product 29. Relevant grease – 4 gms/machine 30. Other relevant – As per General Components” Note No. 4 of Engineering Group |
-:12:-
| 39. | 478 | GENERAL NOTES FOR ENGINEERING PRODUCTS | After the general note at Sr. No. 6, the following general note is added:-
“7. Unless and otherwise specifically mentioned, steel products wherever allowed for import, would be in prime condition only and not in seconds/ defective condition/form” |
| 40. | 888 – 891 | Engineering Products
Table No. 6 |
The quantity of import item in Column 1 B at Sr. No. 58 for “3 Core x 300 sq. mm” is corrected to read as under:-
“2503.02 kg” |
| 41. | 1012 | Plastics Product
Sr.No.H-289 |
The description of import item at Sr. No. 6, (without any change in quantity) is amended to read as under:-
“Impact Modifier for PVC” |
| 42. | 1094 | Textile Product
Sr.No.J-161 |
The norm covered by this entry is substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| J-161 | Knitted Sweaters | 1 kg | 1. Relevant yarn (natural/ manmade) | 1.15 kg./kg. content in the export product |
-:13:-
Annexure “B” to the
Public Notice No. 26
Dated: 26/11/2004
CHEMICALS AND ALLIED PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed | |
| A3422 | Reactive Blue 3GRB (Dye content 92%) | 1 kg | 1. Acid Blue 40
2. Acrylic Acid |
0.820 kg
0.273 kg |
|
| A3423 | Hydrotreating – cum – Desulphurisationcatalyst Type : G-1 catalyst containing Zinc Oxide 85+/-3% and Molybdenum Trioxide 3.5+/-0.3% | 1 kg | 1. Zinc Metal
2. Molybdenum Trioxide |
0.694 kg
0.035 kg |
|
| A3424 | Direct Yellow 118 (Direct Yellow HAR P/C) (Dye content 86%) | 1 kg | 1. Amido G Acid
2. Meta Toluidine 3. MAA Base (3-((4-Amino – 3MethyoxyPhenyl)azo)- BenzeneSulphonic Acid) 4. Sodium Nitrite 5. Soda ash 6. Sodium Acetate 7. EDTA 8. Sulphamic Acid 9. PEG-400 10. Caustic Soda |
0.638 kg
0.244 kg 0.190 kg 0.147 kg 0.792 kg 0.537 kg 0.020 kg 0.008 kg 0.013 kg 0.260 kg |
|
| A3425 | Direct Yellow 106 (Direct Yellow EFC LF/P/C) (Dye content 77%) | 1 kg | 1. 4 Nitro 4 Amino Stilbene-2, 2 Di-sulphonic Acid (NASDSA)
OR 1(a)4,4 DinitroStilbene 2, 2Disulphonic Acid (DNSDSA) |
0.710 kg
0.898 kg |
|
-:14:-
| b) Soda Ash
c) Sodium Hydro Sulphide 2. SodiumNaphthionate 3. Sodium Nitrite 4. Soda Ash 5. Caustic Soda 6. Copper Sulphate 7. D-Glucose 8. Ammonia 9. Hyflo Supercel 10. Activated Carbon |
0.275 kg
0.513 kg 0.437 kg 0.124 kg 0.142 kg 0.605 kg 0.870 kg 0.477 kg 0.633 kg 0.034 kg 0.027 kg |
|||||
| A3426 | BIS – (3,5,5-Trimethyl Hexanoyl) Peroxide, 75% inOdourless Mineral Spirit | 1 kg | 1. Isononyl Chloride
2. Hydrogen Peroxide, 50% 3. Odourless Mineral Spirit |
0.896 kg
0.190 kg 0.239 kg |
||
| A3427 | Reactive Blue 221 (Reactive Blue BRX) | 1 kg | 1. Cyanuric Chloride
2. N-Ethyl Meta Base Ester |
0.187 kg
0.310 kg |
||
| A3428 | 1-Phenyloxindole | 1 kg | 1. Diphenylamine
2. Toluene / IPA 3. ChloroacetylChloride 4. AluminiumChloride |
1.20 kg/kg
3.11 kg/kg 0.81 kg/kg 0.81 kg/kg |
||
| Note: Back ward integration may be allowed for import item No. 3 and 4 as per SION at Sr. A-1277 and A-2616 and A-1064 as per policy. | ||||||
| A3429 | DiminazeneAceturate B-Vet. C-65 | 1 kg | 1. Para Nitro Benzoic Acid
2. DimethylFormamide 3. Glycine |
1.205 kg
0.54 kg 0.32 kg |
||
| A3430 | 2, 4 Dichloro Nitro Benzene | 1 kg | 1. Meta DichloroBenzene | 1.00 Kg. | ||
-:15:-
| A3431 | 2-Acetyl Thiophene | 1 kg | 1. Thiophene | 0.741 Kg. | ||
| A3432 | 2, 4 D Iso Butyl Ester (Technical) | 1 kg | 1. Phenol
2. MonochloroAcetic Acid 3. Caustic Soda 4. Iso Butanol |
0.550 kg
0.466 kg 0.391 kg 0.290 kg |
||
| A3433 | Napthol AS-LS 4-Chloro-3 Hydroxy-2
5-Dimethoxy-2-Naphthanilide C.I. No. 37555 Azoic Coupling component 23 |
1 kg | 1. BON Acid.
2. 2:5 Dimethoxy 4Chloro Aniline |
0.552Kg
0.527Kg |
||
| A3434 | Aqueous solution of 3-MethoxyPropylamine, 40% w/w | 1 kg | 1. 3 Methoxy PropylAmine | 0.400 kg | ||
| A3435 | Antioxidant containing mixedTert-Butyl Phenols : 25% N,N di sec butyl -p-PhenyleneDiamine :75% | 1 kg | 1. Mixed Tert-Butyl Phenols
2. N,N’ , Di-Sec-Butyl p-Phenylene– Diamine |
0.25 kg
0.75 kg |
||
| A3436 | 3-Bromo Thiophene | 1 kg | 1. Thiophene | 0.86 Kg. | ||
| A3437 | Direct Red 80 (Dye content 65%) | 1 kg | 1. J. Acid Urea | 0.200 kg | ||
| A3438 | Acid Violet 90 (cololan BordeauxMB) (61% Dye content) | 1 kg | 1. Beta Nepthol
2. 1 Phenyl – Methyl 5Pyrazolone 3. Sodium Nitrite 4. Twitchell oil |
0.253 kg
0.237 kg 0.231 kg 0.020 kg. |
||
| A3439 | Sodium 2 EthylHexonate | 1 kg | 1. 2-Ethyl HexanoicAcid | 0.870 kg | ||
-:16:-
| A3440 | Acetyl TributylCitrate | 1 kg | 1. Citric Acid Mono Hydrate
2. N-butyl Alcohol 3. Acetyl Chloride |
0.645 kg
0.682 kg 0.217 kg |
| A3441 | Meta Chloro per Benzoic Acid (77% purity) | 1 kg | 1. 3 Chloro Benzoic Acid
2. Tertiary Butanol |
0.760 Kg.
3.5 Kg. |
| A3442 | Flush Yellow for printing Ink (35+/-1% Pigment & 32+/-1% Solid Resin) | 1 kg | 1. Pigment Yellow-12
2. Printing Ink Vehicle Plain (Solid content 61+/-2%) (Linseed Oil Base orSoyabean Oil base) 3. Alkyd Resin, Namely, Soya long oil alkyd resin of 70% oil length having solid content 100% / Linseed oil based alkyd resin (Long oil length) having solid content 100% 4. Petroleum Distillate (distillation range 240-330 Degree C) 5. Oleyl Alcohol 6. Antioxidant, namely, BH.T and MEHQ 7. Texanol Isobutyrate |
0.36Kg.
0.34Kg. 0.12Kg. 0.13Kg. 0.03Kg. 0.01Kg. 0.03Kg. |
| A3443 | Pigment Alkali Blue
Flush (Pigment content 40+/-2%, Solid Resin content 37+/-1%) Formaldehyde Route |
1 kg | 1. Aluminium Chelate
2. Aniline 3. Caustic Soda Flakes/ Lye on 100% basis 4. Dimer Fatty Acid 5. Dodecyl Phenol 6. Formaldehyde (37%) 7. Fumaric Acid |
0.00600Kg.
1.33720Kg. 0.29920Kg. 0.00201Kg. 0.00969Kg. 0.14640Kg. 0.00502Kg. |
-:17:-
| 8. Iso Phthalic Acid
9. Maliec Anhydride 10. Para Octyl Phenol 11. Para Tertiary Butyl Phenol 12. Paraformaldehyde 13. Pentaerythritol 14. Petroleum Distillate (Distillation range 240-330 Degree Centigrade) 15. Rosin, namely, Gum Rosin/ Tall Oil Resin 16. Sodium Nitrate 17. Soyabean Oil 18. Vista Oil 19. Wetting Agent (Tauranol) |
0.01304Kg.
0.00100Kg. 0.01103Kg. 0.00602Kg. 0.01472Kg. 0.03580Kg. 0.24120Kg. 0.2538Kg. 0.23760Kg. 0.07691Kg. 0.00259Kg. 0.13200Kg. |
|||
| A3444 | Offset printing ink in Various coloursother than Black, Cyan, Magenta and Yellow (Min. pigment content 14+/-1%) andSolid Resin 43+/-1%) (Flush Route) | 1 kg | 1. Flush in VariousColours for Printing Ink (35+/-1% Pigment & 32+/-1% Solid Resin)
2. Printing Ink Vehicle Gel (Solid content 59+/-1%) (Linseed Oil Base ORSoyabean Oil Base) 3. Printing ink vehicle Plain (Solid Content 61+/-1%) Linseed Oil Base ORSoyabean Oil Base. 4. Polyethylene Wax Compound Containing 43+/-1% Polyethylene Wax, 29+/-1% Tung Oil and 28+/-1% Refined Linseed Oil |
0.4120Kg.
0.2575Kg 0.2575Kg. 0.0310Kg. |
-:18:-
| 5. PTFE Wax compound containing 61+/-1% PTFE Wax and 33+/-1% Refined Linseed Oil.
6. Cobalt Magnesium combined Drier (Metal content 12+/-0.2%). 7. Petroleum Distillate (Distillation range 240-330 Degree C) |
0.0020Kg.
0.0103Kg. 0.0591Kg. |
|||
| A3445 | Olefin Copolymer Viscosity Index Improver (Containing 85%+/-1% base oil and 15%+/- 1%) Ethylene Polypropylene Copolymer | 1 kg | 1. Base Oil (SN-150/150 N)
2. Ethylene Propylene Copolymer |
0.845 Kg.
0.155 Kg. |
| A3446 | Catalyst 59-5/59-M containing ZnO36% and Na2O 17% Al2 O3 30% | 1 kg | 1. Zinc Carbonate
2. Sodium bicarbonate 3. Alumina Trihydrate 4. Atta gel |
0.616 Kg.
0.511 Kg. 0.480 Kg. 0.154 Kg. |
| A3447 | Ethylene Glycol Mono Ethyl Ether | 1 kg | 1. Denatured EthylAlchol
2. Triethyl Amine Catalyst |
1.154 Kg.
0.004 Kg. |
| A3448 | Synthetic Tanning Agent containing Sodium salt of phenol sulphonicacid polymer with formaldehyde and urea (53%)Disodium Phthalate (12%) | 1 kg | 1. Phenol | 0.217 Kg |
-:19:-
| A3449 | N-N—DI-Sec-Butyl ParaPhenylenediamine | 1 kg | 1. Para Nitro Aniline
2. Methyl EthylKetone 3. Platinum Catalyst (Platinum content 3%) |
0.680 Kg.
0.790 Kg. 0.20 Gm. |
| A3450 | Alpha (2, 4-Chlorophenyl) Ethyl)-alpha (1,1-dimethylethyl) 1H-1,2,4-Triazole-1-ethanol) | 1 kg | 1. Dipentone (1-(4-Chlorophenyl)4,4dimethyl Pentane-3-one)
2. Dimethyl Sulfide 3. Formic Acid 4. Hydrazine Hydrate 5. Potassium Carbonate 6. DimethylFormamide 7. N-Heptane |
1.15 Kg.
0.50 Kg. 0.32 Kg. 0.66 Kg. 1.02 Kg. 1.00 Kg. 1.00 Kg. |
| A3451 | N-Isopropyl-N-Phenyl-P-Phenylenediamine | 1 kg | 1. P-Amino DiphenylAmine
2. Acetone 3. Platinum Catalyst (Platinum content 3%) |
0.816 Kg.
0.319 Kg. 0.098 gm. |
| A3452 | Tri Phenyl Phosphine | 1 kg | 1. Sodium Metal
2. Yellow Phosphorous 3. MonochloroBenzene 4. Methanol 5. Toluene |
0.905 kg
0.206 kg 2.378 kg 1.50 kg 2.00 kg |
| A3453 | Solvent Orange3-(Chrysodine Y base) | 1 kg | 1. Meta PhenyleneDiamine
2. Aniline |
0.582Kg.
0.480Kg. |
| A3454 | Direct Red 239
(Dye content 68%) |
1 kg | 1. J-Acid Urea
2. Beta Naphthol.. |
0.363 kg.
0.331 kg. |
-:20:-
| A3455 | Pyridine Hydrochloride | 1 kg | 1. Pyridine
OR 1(a) Silica Alumina Catalyst OR 1(a) Alumino Silicate Catalyst 1(b) Ethyl Alcohol (Denatured) 1(c) Methanol 2. Toluene |
0.760Kg.
0.027Kg. 0.0144Kg. 1.767Kg. 1.072Kg. 0.429Kg. |
| A3456 | 3,5-DimethylPiperidine | 1 kg | 1. Propionaldehyde
2. Alumina Silica Catalyst 3. Ruthenium Catalyst (Ruthenium content 5%) |
8.000Kg.
0.175Kg. 0.007Kg. |
| A3457 | 3 Acetyl Pyridine | 1 kg | 1. Ethyl Acetate
OR 1(a)Ethyl Alcohol denatured 1(b)Acetic Acid Glacial 2.Methyl Nicotinate OR 2. 3-Cyanopyridine OR 2(a)Alumina Silica Catalyst 2(b)Denatured Ethyl Alcohol 2(c) Methyl Alcohol |
1.770 Kg.
0.915 Kg. 1.267 Kg. 1.572 Kg. 1.619 Kg. 0.037 Kg. 3.842 Kg. 2.275 Kg. |
| A3458 | Sodium Antimonate | 1 kg | 1. Antimony Trioxide | 0.783 kg. |
-:21:-
A3459 |
Oxy AluminiumOctoate/ AluminiumChelate (Aluminiumcontent 5.9+/- 1%) |
1 kg |
1. AluminiumIsopropoxide2. Ethyl Aceto Acetate3. Neopentyl Glycol4. Petroleum Distillate (distillation range: 240-330˚ centigrade)5. Mineral Turpentine Oil |
0.362 Kg.0.444 Kg.0.142 Kg.0.222 Kg.0.111 Kg. |
A3460 |
Alkali Blue (Pigment Blue 61) C.I. No. 42765.1 |
1 kg |
1. Aniline2. Formaldehyde(37%)3. Wetting agent (tauranol)4. Sodium Nitrate5. Caustic Soda lye / flakes on 100% basis |
3.343Kg.0.366Kg.0.330Kg.0.594Kg.0.748Kg. |
A3461 |
Preservative containing :i) N-OctylIsothiozolinone(45%) 3.2%-3.4%ii) BenzimidazoleCarbamate 8-10.5%iii) N( N,N Di-Methyl Amino Carbonyl) 3,4Dichloro Aniline 20-22% |
1 kg |
1. N-OctylIsothiozolinone(45%)2. BenzimidazoleCarbamate(CarbendazineTechnical)3. N( N,N Di-Methyl Amino Carbonyl) 3,4Dichloro Aniline (Diuron Technical)4. Isodecyloxy PropylAmine (30%) Acetate) |
0.0733 kg0.0925 kg0.210 kg0.0028 kg |
A3462 |
1,2,4 TrichloroBenzene |
1 kg |
1. Ortho DichloroBenzene |
1.10 Kg. |
-:22:-
| A3463 | Low Voltage Porcelain Insulators of following types (Bushing, Shackle Teel, Spool, Stay Guy, Coach Screw Machine Screw, Telephone Insulators) | 1000 kg of porcelain body | 1. Ball Clay
2. Bentonite 3. SMC/ CMC 4. SKO/ MTO 5. HSD/ LDO 6. Green Chrome Oxide 7. Zinc Oxide 8. Manganese Dioxide 9. Blue or Grey strain (Allowed only in case of Blue or Grey Insulators) |
200 Kg.
150 Kg. 2.5 Kg. 0.6 K.L. 0.6 K.L. 1 Kg. 1 Kg. 1 Kg. 0.8 Kg. |
| A3464 | Dimethyl LaurylAmine Oxide
(Active matter 28-32%) |
1 kg | 1. Dimethyl LaurylAmine
2. Hydrogen Peroxide 50% |
0.266 Kg.
0.088 Kg. |
| A3465 | Triprolidine | 1 kg | 1. 2-Bromo Pyridine
2. Pyrrolidine 3. N-Butyl Lithium 4. Para Formaldehyde 5. Di Iso Propyl Ether 6. Acetone |
2.266 Kg.
1.03 Kg. 1.00 Kg. 0.90 Kg. 1.63 Kg. 3.50 Kg. |
| A3466 | N- MethyltriethanolAmmonium fatty acid
DiesterMethosulphate 88-90% in Isopropyl alcohol |
1 kg | 1. Distilled Palm fatty Acid
2. Triethanolamine 3. Iso Propyl alcohol |
0.670 kg.
0.185 Kg. 0.102 Kg. |
| A3467 | 3a 7B DioxyCholanic Acid | 1 kg | 1. 3a 7a Dihydroxy 5B Cholan-24-OIC Acid Technical Grade
2. Sodium Metal 3. Sodium Bromate 4. Secondary Butanol |
1.218 kg.
1.32 kg. 0.79 kg. 7.17 kg |
-:23:-
| A3468 | 5 – Sulfo Salicylic Acid | 1 kg | 1. Salicylic Acid | 0.680kg. |
| A3469 | Oryzalintechnical 98% Min. | 1 kg | 1. Potassium-4 Chloro3,5 Nitro BenzeneSulphonate
2. Di-N-propyl Amine 3. Thionyl Chloride 4. DimethylFormamide 5. Benzene |
1.340 kg
0.490 kg 0.720 kg 0.088 kg 2.000 kg |
| A3470 | Rofecoxib | 1 kg | 1. Methylene Chloride
2. Acetyl Chloride 3. Methanol 4. Thioephenol 5. Acetic Acid 6. Tetrahydrofuran |
4.00 kg
0.64 kg 2.00 kg 1.10 kg 2.00 kg 2.00 kg |
-:24:-
Annexure “C” to the
Public Notice No. 26
Dated: 23/11/2004
ENGINEERING PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C1995 | Refrigerator | 1 No. | 1. Copper Coated M.S. Tube
2. Care 30 gas 3. Cyclopantane 4. Isocyanate 5. Polyol 6. Isobutane 7. CRCA 8. HIP Sheet 9. General Purpose Polystyrene |
1.02 Mtr./ Mtr. content in export product of relevant specification used in export item
OR 1.02 Kg./Kg. content in export product. Net to net. 1.04 Kg./Kg. content in export 0.416 Kg./Kg. content of Foam in the export product 0.624 Kg./Kg. content of Foam in the export product 1.04 Kg./Kg. content in export product 1.04 Kg./Kg. content in export product 1.04 Kg./Kg. content in export product 1.04 Kg./Kg. content in export product |
-:25:-
| 10. Polypropylene Homo Polymer
11. Polypropylene Copolymer 12. Pre-Coated Steel Sheets 13. Lock Prop 14. Double Tack Tape 15. Other Relevant Component |
1.04 Kg./Kg. content in export product
1.04 Kg./Kg. content in export product 1.04 Kg./Kg. content in export product 1.04 Kg./Kg. content in export product Net to net. Net to net. |
|||
| C1996 | Air Cooled Fluid Cooler | 1 No. | 1. Seamless Copper Tube
2. Heresite Coating |
1.01 Kg./Kg. content in export product.
2% of FOB value. |
| C1997 | Copper Circle (in sheet form) | 1 kg | 1. Copper Cathode | 1.03 Kg. |
| C1998 | Chairs | 1 No. | 1. Polyol.
2. Isocyanate 3. Relevant Fabric/ Leather cloth 4. CRCA Mild Steel Sheets 5. Gas Spring 6. Chair Mechanism 7. Caster |
0.63 Kg. of the weight of the Foam.
0.42 Kg. of the weight of the Foam. 1.10 Sq.m/Sq.m content 1.05 Kg./Kg. content in export product. Net to net. Net to net. Net to net. |
-:26:-
| C1999 | Modular Work Station. | 1 No. | 1. Relevant Pre laminated/ Plain particle Board
2. CRCA Mild Steel Sheet 3. RelevantAluminium Alloy Ingot 4. PVC Plastic Sheet (8mm to 25mm wide) |
1.05 Sq.m/Sq.m content in export product.
1.05 Kg./Kg. content in export product. 1.05 Kg./Kg. content in export product. 1.02 Metre/Metre content in export product. |
| C2000 | Stainless SteelTravelling Guard | 1 kg | 1. Cold Rolled Stainless Steel Sheet Coil of relevant grade | 1.05 Kg. |
| C2001 | Platinum Ingots Min Purity 99.95%
Palladium Ingots Min Purity 99.95% Gold Ingots Min. Purity 99.5% Silver Ingots Min Purity 99.9% Rhodium Powder Min Purity 99.5% Iridium Powder Min Purity 99.5% |
1 kg | 1. Precious Metal Ores & Concentrates containing any one or more precious metals viz. Platinum, Palladium, Gold, Silver, Rhodium, Iridium, Ruthenium, Osmium.
OR 2. Waste and Scrap of precious metal or metal clad with precious metal; other waste and Scrap containing precious metal or precious |
1.02 Kg./Kg. content of precious metal in export product.
1.02 Kg./Kg. content of precious metal in export product. |
-:27:-
| Ruthenium Powder Min Purity 99.5%
Osmium Powder Min Purity 99.5% |
metal compounds of a kind used principally for the recovery of any one or more precious metals viz. Platinum, Palladium, Gold, Silver, Rhodium, Iridium, Ruthenium, Osmium. | |||||||
| Note: Each of the precious metal contained in the above input material as declared in the import documents is to be accounted for in the export product. | ||||||||
| C2002 | Expansion Fasteners made of Non Alloy Steel | 1 kg | 1. Non Alloy Steel Round Bar
2. Non Alloy Steel Sheet. |
1.10 Kg./ Kg. content in export product.
1.47 Kg./ Kg. content in export product. |
||||
| C2003 | Hot Rolled Non-alloy Steel (Pickled/ Un-pickled) Plates/ Sheets/ Strips/ Wide Coils | 1 MT | 1. Non-alloy Steel melting Scrap, Pig Iron/Hot Metal, Sponge Iron including HotBriquetted Iron (HBI).
2. Low Silica Lime Stone 3. (a) Bulk Ferro Alloys (Ferro Silicon/ Ferro Manganese/ Silicon Manganese) |
1150 Kg.
76 Kg. 8.4 Kg. |
||||
-:28:-
| (b) Special Ferroalloys/
metals (Ferro Chrome/ Ferro Vanadium/ Ferro Niobium/ Nickel Oxide Sinter/ Ferro Nickel/ Ferro Aluminium/ Ferro Titanium/Ferro Boron/Ferro Phosphorous/ Magnesium Metal/ Ferro Molybdenum) 4. Additives: (a) Aluminium wires/ scraps/shots/ingotsand/or AluminiumPowder in Cored wire. (b)CaSi/ CaFe Lumps,CaFeAl/ CaFe/ CaSiPowder in Cored wire. (c) Met Coke/Raw Pet. Coke/Calcined Pet Coke. 5. Consumables/ Misc. (a)Rolls for caster and rolling mill. (b)Copper mould for casting. (c)Casting Powder (d)Rolling Mill Oil/ Hydraulic Oil/ Lubricating Oil (e)Celox Inserts/ Oxygen Probes/ Sampler Probes. (f)Shear Blades/ Saw Blades. |
2.6 Kg.
3.0 Kg. 0.5 Kg. 4 Kg. 0.5 Kg. 0.02 Kg. 1 Kg. 3 Kg. 0.10 Kg. 0.01 Kg. |
-:29:-
| (g)Oxygen Lance Pipes.
(h)Temperature Tips/ Sampler Tips/ Thermodynamic elements. (i) Graphite Electrodes. 6. Refractories: (a)Shaped Refractories(Fired/Unfired Bricks/ Shapes) (b)MonolithicRefractories(including Castables, ramming mass/ gunning mixes) (c)Special Refractoriesi.e. C.C. refractory (Shrouds, Mono Block Stopper, SE Nozzles), Slide Gate refractory, Porous Plug, Zircon/ZirconiaNozzles & TundishNozzles. 7. Energy Sources: (a) LPG (for Supersonic Oxygen lance in EAF) (b) LDO (or preheating of ladle and heating of thin slab in tunnel furnace). (c)Natural Gas/ LNG (for Tundish & SEN heating) |
0.12 Kg.
0.20 Kg. 2.4 Kg. 3 Kg. 6 Kg. 1 Kg. 4 Kg. 20 Kg. 0.25 SCM |
|||
| Note: 1. This norm is applicable for export product manufactured through Electric Arc. Furnace (CONARC process) – Thin Slab Caster – Hot Strip Mill. | ||||
-:30:-
| Note:2. Quantity of Pig Iron/Hot Metal and Sponge Iron/HBI allowed against S.No.1 shall not exceed 60% and 35% respectively of the total quantity permitted therein.
Note:3. Import of Silico manganese allowed at S.No.3(a) shall not exceed 60% of the total quantity of import. Note:4. Special Ferro Alloy(s)/Metal against S.No.2(b) will be allowed only if the respective alloying element(s)/metal is/are actually present in the export product. |
||||
| C2004 | Black Pipe | 1 MT | 1. Hot rolled carbon steel strips/ coils/ plates other than high carbon steel | 1.05 MT |
| C2005 | Precision Steel Tubes | 1 MT | 1. Cold rolled carbon steel strips/ coils/ plates other than high carbon steel | 1.05 MT |
| C2006 | Trumpet Horns | 1 kg | 1. CRCA Steel Strip 0.6 x 12
2. CRCA Steel Strip 0.4 x 85 3. CRCA Steel Strip 0.33 x 85 4. Alu-Zinc Steel Strip 1.25 x 118.4 5. Super EnamelledCopper Wire 6. ABS Blacks 7. Hexagonal Nut 8. Contact Point |
1.07 Kg/ kg content in the export product
1.20 Kg/ kg content in the export product 1.20 Kg /kg content in the export product 1.22 Kg/ kg content in the export product 1 Kg/ kg content in the export product 1.05 Kg/kg content in the export product Net to net Net to net |
