(TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY PART-1-SECTION-1)
GOVERNMENT OF INDIA
MINISTRY OF COMMERCE
PUBLIC NOTICE NO. 12 (RE-2001)/1997-2002
NEW DELHI : DATED : 01/06/2000.
Attention is invited to Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time.
2. In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended.
3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/ corrections at appropriate places as mentioned in Annexure “A” to this Public Notice shall be made.
4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-
CHEMICALS AND ALLIED PRODUCTS
After the existing entry at Sr.No.A-2428, the new entries from Sr.No.A-2429 to A-2438 shall be added as per Annexure “B” to this Public Notice.
ENGINEERING PRODUCTS
After the existing entry at Sr.No.C-1530, the new entries from Sr.No.C-1531 to C-1537 shall be added as per Annexure “C” to this Public Notice.
5. This issues in Public interest.
Sd/-
(N.L. LAKHANPAL)
DIRECTOR GENERAL OF FOREIGN TRADE
(S. L. GUPTA)
DY. DIRECTOR GENERAL OF FOREIGN TRADE
FOR DIRECTOR GENERAL OF FOREIGN TRADE
Annexure “A” to the
Public Notice No. 12
Dated: 01/06/2000
AMENDMENTS/CORRECTIONS
|
Sr. No. |
Page No. |
Reference |
Amendments/Corrections |
|
1 |
2 |
3 |
4 |
|
1. |
174 |
Chemicals & Allied Products Sr.No.A1412 |
The norms covered by this entry shall be substituted by the following:- |
|
Sr.No. |
Export Item |
Qty. |
Import Item |
Qty Allowed |
|
A1412 |
N(1,3 Dimethyl Butyl) N Phenyl-Para Phenylene Diamine (Minimum 95%) |
1 kg |
1.Aniline 2.MIBK(Methyl Isobutyl Ketone) 3.Para Nitro Chloro Benzene 4.Formic Acid(85%) 5.Potassium Carbonate 6.Platinum Catalyst |
0.463 kg 0.444 kg 0.761 kg 0.354 kg 0.459 kg 0.0002 kg |
|
2. |
306 |
Chemicals & Allied Products Sr.No.A2299 |
The description of import item Sr. No. 1 shall be amended to read as under:- “L-Glutamine and without Sodium Bicarbonate.” |
|
3. |
307 |
Chemicals & Allied Products Sr.No.A2301 |
The quantity of export item shall be corrected to read as under:- “10,000 Vials” |
|
4. |
438 |
Engineering Product Sr.No.C169 |
After import item No. 7, the following item (with quantity) shall be added:-
8. Aluminium Sheet/ – 1.05 kg/kg CRCA Sheet (for content in Blades of Fan) (only the export The relevant item used product”. in the export to be allowed) |
|
5. |
589 |
Engineering Product Sr.No.C697 |
After import item No.1, the following alternative item (with quantity) shall be added:- “OR Aluminium Wire – 36.225 kg.” (Not below 3mm) |
|
6. |
589 |
Engineering Product Sr.No.C698 |
After import item No.1, the following alternative item (with quantity) shall be added:- “OR Aluminium Wire – 5.999 kg.” (Not below 3mm) |
|
7. |
607 |
Engineering Product Sr.No.C829 |
1. The description of import item No.1 (with quantity) shall be amended to read as under:-
“1. C.R.S.S. Strip – 988 kgs. OR H.R.S.S. Strip – 1522 kgs.” 2. At the end of this entry the following Note shall be added:- Note:- “In so far as H.R.S.S. is concerned, the input norm as above shall be valid for a period of one year viz. upto 31.3.2001 only after which it shall be reviewed”. |
|
8. |
615 |
Engineering Product Sr.No.C876 |
1.Import item No. 5 alongwith quantity shall be deleted. 2.After import item No. 4 the following items (with quantity) shall be added:- “5. Polyox WSRN 750 – 44 kg. 6. Polyox Coagulant – 44 kg. 7. General purpose – 38 kg.” Polystyrene 3.The note below this norm shall be amended to read as under:- Note :- “1. The items at S.No. 5, 6 and 7 above shall be allowed only if the product exported is with Lubra Strip”. |
|
9. |
712 |
Engineering Product Sr.No.C1315 |
The description of import item No. 1 (without any change in quantity) shall be amended to read as under:- “Inco`s’ Nickel Rounds/ Pellets Unwrought & Unalloyed.” |
|
10. |
757 |
Engineering Product Sr.No.C1503 |
The description of import item No. 1 (alongwith quantity) shall be amended to read as under:- “1.Copper – 1.06 MT/MT concentrate of copper content in the export product OR Copper Scrap – 1.075 MT/MT Copper contents in the export product Blister – 1.04 MT/MT copper content in the export product.” |
|
11. |
805 |
Food Product Sr.No.E51 |
After import item No. 3 the following items (with quantity) shall be added:-
“4. Kraft Paper – Net +1% wastage 5.Adhesive (Powder – 0.005 gm form) (approx.) 6.Printing Ink – 0.00005 gm.” |
|
12. |
830 – 831 |
Leather Product Sr. No.G18 |
1.After import item No.7, the following item (with quantity) shall be added:- “8. Leather Chemicals – As per Leather chemicals prescribed in G-7, on pro-rata Basis”. 2.At the end of this entry the following foot-note shall be added:- “Note: 2. For import of Leather Chemicals (Item No. 8 ) the requirement of Finished Leather per number of Glove is 0.50 sq.ft.”. |
|
13. |
873 |
Plastic Product Sr.No.H-90 |
After import item No. 1 the following additional item with quantity shall be added:-
“2. Trigonox 101 (2,5 Bis – 0.007 kg/kg” tert-butylperoty-2,5-dimethyl hexane, minimum 92% in solvent) |
|
14. |
951 |
Sports Goods Sr.No.I-23 |
1.The description of export item (without change in quantity) shall be amended to read as under:- “Head Guard made out of PVC/PU leather cloth” 2.The description of import item (without change in quantity) shall be amended to read as under:- “Relevant PVC/PU Leather Cloth”. |
|
15. |
1 |
GENERAL NOTES FOR ALL EXPORT PRODUCTS GROUP |
“In the general notes, note No. 4 shall be deleted”. |
Annexure “B” to the
Public Notice No. 12
Dated: 01/06/2000
CHEMICALS AND ALLIED PRODUCTS
|
Sr.No. |
Export Item |
Qty. |
Import Item |
Qty. Allowed |
|
A2429 |
Tris Nonyl Phenyl Phosphite |
1 kg |
1.Nonyl Phenol 2.Phosphorous Trichloride |
1.066 kg 0.222 kg |
|
A2430 |
Cis-2-(2,4- Dichlorophenyl)-2-(1-H-Imidazole-1,-yl-methyl-1,3-Dioxolan-4-yl)methyl-P-Tolyl sulphonate OR Cis-Tosylate |
1.2,4 Dichloro Acetophenone 2.Imidazole 3.Toluene 4.Methanol 5.Methyl Isobutyl Ketone |
3.07 kg 1.38 kg 6.41 kg 9.08 kg 0.74 kg |
|
|
A2431 |
Cyanoacetamide |
1 kg |
1.Monochloro Acetic Acid 2.Sodium Cyanide 3.Acetone 4.Methyl Isobutyl Ketone |
3.75 kg 1.36 kg 1.75 kg 1.36 kg |
|
A2432 |
Reactive Polyamide Resin with Free Amino Groups and Viscosity at 250C 125 to 175 poises (SYNPOL-140) |
1 kg |
1.Domer Acid 2.Triethylene Tetramine 3.Industrial Mono Carboxylic Fatty Acid |
0.684 kg 0.443 kg 0.029 kg |
|
A2433 |
Reactive Polyamide Resin with High Amine value (340-400) Long Pot Life and Viscosity at 250C 2 to 6 poises (SYNPOL-160) |
1 kg |
1.Industrial Monocarboxylic Fatty Acid 2.Triethylene Tetramine |
0.600 kg 0.440 kg |
|
A2434 |
Slow Curing Solvent free aromatic polyamine Epoxy adduct (Epoxy Resin Hardner-340) Viscosity –50-90 Poises Pot life – 8-10 hrs. |
1 kg |
1.Aniline 2.Epoxy Resin 3.Dibutyl Phthalate |
0.470 kg 0.384 kg 0.360 kg |
|
A2435 |
Fast Curing Solvent free aromatic polyamine Epoxy adduct (Epoxy Resin Hardner-350) Viscosity –150-210 Poises Pot life – 20-30 Minutes |
1 kg |
1.Aniline 2.Epoxy Resin 3.Dibutyl Phthalate |
0.442 kg 0.146 kg 0.338 kg |
|
A2436 |
Polyvinyl Butyral Resin |
1 kg |
1.Poly Vinyl Alcohol 2.N-Butyraldehyde |
0.710 kg 0.429 kg |
|
A2437 |
BOPP Bags with/without Adhesives Tape |
1 kg |
1.BOPP Film (relevant thickness and grade) 2.Double side self-adhesive Tape |
1.02 kg/kg content in the export product 1.02 Sq. mtr./ Sq. mtr. content in the export product |
|
Note:- The item No. 2 viz. Double side self-adhesive Tape shall be permitted for import only when the product is exported with adhesive tape. |
||||
|
A2438 |
Reactive Polyamide Resin with High Amine Value (380-420) Rapid curing and Viscosity at 25O : 10 to 15 poises (SYNPOL-150) |
1 kg |
1.Domer Acid 2.Triethylene Tetramine 3.Industrial Mono- carboxylic Fatty Acid |
0.236 kg 0.431 kg 0.389 kg |
Annexure “C” to the
Public Notice No. 12
Dated: 01/06/2000
ENGINEERING PRODUCTS
|
Sr.No. |
Export Item |
Qty. |
Import Item |
Qty Allowed |
|
C1531 |
Pneumatic Tools- Hand drills without Muffler with chuck ¾” x 3 ¾” (19mm x 95.2mm) |
1No |
1.Relevant Inlet bushing 2.Relevant Hose tail 3.Relevant Throttle lever 4.Relevant Rear Valve seat 5.Relevant Front Valve Seat 6.Relevant Valve 7.Relevant Handle bare 8.Relevant Throttle Valve bushing 9.Relevant Bolt 10.Relevant Pawl 11.Relevant Ratchet Ring 12.Relevant Cylinder 13.Relevant Piston 14.Relevant Cylinder bushing 15.Relevant Retainer Plate 16.Relevant Chuck 17.Relevant chuck sleeve 18.Relevant front head 19.Relevant Plunger shifter |
1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 2 Nos. 2 Nos. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. |
|
1.Relevant shifter sleeve 2.Relevant Retainer Sleeve |
1 No. 1 No. |
|||||
|
Note:- The import of components shall be allowed on net to net basis with accountability clause. |
||||||
|
C1532 |
Pneumatic Tools- Hand drills with Muffler and shifter sleeve with chuck ¾” x 3 ¾” (19mm x 95.2mm) |
1No. |
1.Relevant Inlet bushing 2.Relevant Hose tail 3.Relevant Throttle lever 4.Relevant Rear Valve seat 5.Relevant Front Valve Seat 6.Relevant Valve 7.Relevant Handle bare 8.Relevant Throttle Valve bushing 9.Relevant Bolt 10.Relevant Pawl 11.Relevant Ratchet Ring 12.Relevant Cylinder 13.Relevant Piston 14.Relevant Cylinder bushing 15.Relevant Retainer Sleeve 16.Relevant Retainer Plate 17.Relevant Chuck 18.Relevant Chuck Sleeve 19.Relevant Front head |
1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 2 Nos. 2 Nos. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. |
||
|
20.Relevant Muffler 21.Relevant Plug-Muffler 22.Relevant Button-rotation release 23.Relevant Wash er-Clamping 24.Relevant Plunger Shifter 25.Relevant Shifter Sleeve 26.Relevant Depth gauge 27.Relevant dead handle |
1 No. 1 No. 2 Nos. 1 No. 1 No. 1 No. 1 No. 1 No. |
|||
|
Note:- The import of components shall be allowed on net to net basis with accountability clause. |
||||
|
C1533 |
Pneumatic Tool- Concrete Vibrator with 2 ½ (inch) Head |
1No. |
1.Relevant Live Air Handle Cap 2.Relevant Plug Handle 3.Relevant Live Air Handle cover 4.Relevant Sleeve 5.Relevant Hose Nipple 6.Relevant `Band-It’ Clamp 7.Relevant Intake Hose 8.Relevant Shell & Nose Cap 9.Relevant End Cap 10.Relevant Eccentric Shaft Nut Assembly |
1 No. 1 No. 1 No. 1 No. 2 Nos. 2 Nos. 1 No. 1 No. 1 No. 2 Nos. |
|
11.Relevant Upper end Plate 12.Relevant Eccentric Weight 13.Relevant Eccentric Shaft 14.Relevant Lower end Plate 15.Relevant Hose Clamp (Band-It) 16.Relevant Swivel Nipple 17.Relevant Lock wire 18.Relevant Hose Clamp(Band-It) 19.Relevant Hose Nipple 20.Relevant Exhaust Swivel Collar 21.Relevant Live air hose 22.Relevant Strainer 23.Relevant Oiler body 24.Relevant Live air handle stem & Bushing 25.Relevant Exhaust Hose |
1 No. 1 No. 1 No. 1 No. 3 Nos. 1 No. 1 No. 2 Nos. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. |
|||
|
Note:- The import of components shall be allowed on net to net basis with accountability clause. |
||||
|
C1534 |
Pneumatic Tool |
1 No. |
1.Relevant Valve 2.Relevant retainer 3.Relevant Piston 4.Relevant Spring 5.Relevant Cylinder 6.Relevant Clamp 7.Relevant Muffler 8.Relevant Muffler Plug 9.Relevant Housing 10.Relevant Pin 11.Relevant Air Tube 12.Relevant Bushing 13.Relevant Shaft 14.Relevant Button 15.Relevant Bush 16.Relevant Bearing 17.Relevant Sleeve 18.Relevant Casting 19.Relevant Chain Link Lead 20.Relevant throttle Valve 21.Relevant Handle |
1 No. 1 No. 1 No. 2 Nos. 1 No. 1 No. 1 No. 1 No. 1 No. 2 Nos. 1 No. 2 Nos. 1 No. 1 No. 1 No. 2 Nos. 1 No. 1 No. 1 No. 1 No. 1 No. |
|
Note:- The import of components shall be allowed on net to net basis with accountability clause. |
||||
|
C1535 |
Pneumatic Tool- Rock Drill |
1 No. |
1.Relevant Handle Bracket (made of steel Gr. SAE 8620) 2.Relevant Handle Bolt (made of steel Gr. EN 9) 3.Relevant Air inlet swivel (made of steel Gr. EN 24) 4.Relevant Air inlet swivel nut (made of steel Gr. SAE 8620) 5.Relevant Blower Valve (made of steel Gr. SAE 8620) 6.Relevant Thru Bolt (made of steel Gr. EN 24) 7.Relevant Front head (made of steel Gr. SAE 8620) 8.Relevant Retainer (made of steel Gr. SAE 8620) 9.Relevant Retainer trunnion (made of steel Gr. SAE 8620) 10.Relevant Cylinder (made of steel Gr. SAE 8620) 11.Relevant Back head (made of steel Gr. SAE 8620) |
1 No. 1 No. 1 No. 1 No. 1 No. 2 Nos. 1 No. 1 No. 2 Nos. 1 No. 1 No. |
|
12.Relevant Throttle valve handle (made of steel Gr. SAE 8620) 13.Relevant Ratchet ring (made of steel Gr. SAE 8620) 14.Relevant Valve case (made of steel Gr. EN 354) 15.Relevant Blower valve bushing (made of steel Gr. SAE 8620) 16.Relevant Rifle bar nut (Bronze) (made of steel Gr. SAE 8620) 17.Relevant Piston (made of steel Gr. EN 355) 18.Relevant Bushing Cylinder (made of steel Gr. SAE 8620) 19.Relevant Air tube (made of steel Gr. SAE 8620) 20.Relevant Chuck rotation nut (made of steel Brass) 21.Relevant Chuck Sleeve (made of steel Gr. SAE 8620) 22.Relevant Chuck (made of steel Gr. SAE 8620) |
1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. |
||||||||
|
23.Relevant Rifle bar (made of steel Gr. SAE 8620) 24.Relevant Valve (made of steel Gr. SAE 8620) 25.Relevant Valve Guide Bushing (made of steel Gr. SAE 8620) 26.Relevant Bushing-water valve (made of steel Brass) 27.Relevant Throttle Valve (made of steel Gr. SAE 8620) |
1 No. 1 No. 1 No. 1 No. 1 No.
|
||||||||
|
Note:- The import of components shall be allowed on net to net basis with accountability clause. |
|||||||||
|
C1536 |
Pneumatic Tool- Rivetting Cutter (buster) 8″ to 11″ Cylinder |
1 No. |
1.Relevant Throttle valve (made of steel Gr. SAE8620) 2.Relevant Throttle tube (made of steel Gr. ENIA) 3.Relevant Throttle lever (made of steel Gr. EN8) 4.Relevant Valve case lid (made of steel Gr. SAE8620) 5.Relevant Valve (made of steel Gr. EN24) |
1 No. 1 No. 1 No. 1 No. 1 No. |
|||||
|
6.Relevant Valve case (made of steel Gr. SAE8620) 7.Relevant Handle (made of steel Gr. EN8) 8.Relevant Spring clip (Lock collar) (made of steel Gr. EN8) 9.Relevant Lock collar (made of steel Gr. EN8) 10.Relevant Cylinder (made of steel Gr. EN24) 11.Relevant Piston (made of steel Gr. T118 CR2) 12.Relevant Lower sleeve (made of steel Gr. EN31) 13.Relevant Upper sleeve (made of steel Gr. EN31) 14.Relevant Retainer sleeve (made of steel Gr. EN24) 15.Relevant Exhaust Deflector (made of steel Gr. SAE1070) |
1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. |
|||
|
Note:- The import of components shall be allowed on net to net basis with accountability clause. |
||||
|
C1537 |
Regulators with rotating outlet for LPG cylinder |
1 No. (227 gms) |
1. Zinc |
245 gms. |
