Follow Us :

(TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY

PART-1-SECTION-1)

GOVERNMENT OF INDIA

MINISTRY OF COMMERCE

PUBLIC NOTICE NO 51 (RE-99)/1997-2002

NEW DELHI : DATED 01/03/2000.

Attention is invited to Paragraph 7.8 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time.

In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended.

In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/ corrections at appropriate places as mentioned in Annexure “A” to this Public Notice shall be made.

In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-

CHEMICALS AND ALLIED PRODUCTS

After the existing entry at Sr.No.A-2386, the new entries from Sr.No.A-2387 to A-2402 shall be added as per Annexure “B” to this Public Notice.

ENGINEERING PRODUCTS

After the existing entry at Sr.No.C-1500, the new entries from Sr.No.C-1501 to C-1517 shall be added as per Annexure “C” to this Public Notice.

This issues in Public interest.

Sd/-

(N.L. LAKHANPAL)

DIRECTOR GENERAL OF FOREIGN TRADE

(ASHUTOSH MISHRA)

DY.DIRECTOR GENERAL OF FOREIGN TRADE

FOR DIRECTOR GENERAL OF FOREIGN TRADE

(Issued from File No.01/83/44/19/AM99/DES-VI)

-:2:-

Annexure “A” to the

Public Notice No.51

Dated: 01/03/2000

AMENDMENTS/CORRECTIONS

Sr.No.

Page No.

Reference

Amendments/Corrections

(1)

(2)

(3)

(4)

1.

10

Chemicals & AlliedProducts

Sr.No.A35

The description of the import item at Sr. No. 4 shall be amended (without any change in the quantity) to read as under:-

“BIS TRIMETHYL SILYL UREA”

2.

12

Chemicals & AlliedProducts

Sr.No.A48

The description and quantity of the import item at Sr. No. 1(a) shall be amended to read as under:-

“PIPERAZINE – 2.21 kg.”.

WATER SOLUTION

(ON 100% BASIS)

3.

24

Chemicals & AlliedProducts

Sr.No.A111

The description of the import item at Sr. No. 4 shall be amended (without any change in the quantity) to read as under:-

“BIS TRIMETHYL SILYL UREA”

4.

35

Chemicals & AlliedProducts

Sr.No.A173

The description of the import item at Sr. No. 4 shall be amended (without any change in the quantity) to read as under:-

“SODIUM DIHYDRO BIS {2 METHOXY ETHOXY ALUMINATE 70% IN ACTIVE TOLUENE}”.

-:3:-

5.

49

Chemicals & AlliedProducts

Sr.No.A274

After import item No. 4 the following item with quantity shall be added:-

“ACETONE – 1.22 kg/kg”

6.

53

Chemicals & AlliedProducts

Sr.No.A307

The description and quantity of the import item at Sr. No. 1 shall be amended to read as under:-

“PIPERAZINE – 1.67 kg.”.

WATER SOLUTION

(ON 100% BASIS)

7.

53

Chemicals & AlliedProducts

Sr.No.A308

The description and quantity of the import item at Sr. No. 1 shall be amended to read as under:-

“PIPERAZINE – 1.46 kg.”.

WATER SOLUTION

(ON 100% BASIS)

8.

4

Chemicals & AlliedProducts

Sr.No.A686 ( As amended vide P.N. No. 37 dt. 01.11.99)

The description of the import item at Sr. No. 2 shall be amended (without any change in the quantity) to read as under:-

“Cobalt Chloride hexa hydrate”.

9.

130

Chemicals & AlliedProducts

Sr.No.A938

The norm covered by this entry shall be substituted by the following:-

Sr.No.

Item of Export

Qty.

Item of Import

Qty. Allowed

A938

Solvent Black 5

1 kg

  • Aniline
  • Nitrobenzene

1.070 kg

0.305 kg

10.

130

Chemicals & AlliedProducts

Sr.No.A939

The norm covered by this entry shall be substituted by the following:-

Sr.No.

Item of Export

Qty.

Item of Import

Qty. Allowed

A939

Solvent Black 7

1 kg

  • Aniline
  • Nitrobenzene

1.070 kg

0.305 kg

-:4:-

11.

271

Chemicals & AlliedProducts

Sr.No.A2017

The description of the import item at Sr. No. 4 shall be amended (without any change in the quantity) to read as under:-

“BIS TRIMETHYL SILYL UREA”

12.

273

Chemicals & AlliedProducts

Sr.No.A2027

The norm covered by this entry shall be substituted by the following:-

Sr.No.

Item of Export

Qty.

Item of Import

Qty. Allowed

A2027

Cefotaxime Sodium Sterile USP/BP

1 kg

  • 7-ACA
  • Mercapto Benzo Thiazole-4-YL-2 (2-Amino Thiazolyl) Methoxy Imino Acetate (MAEM)

OR

  1. Ethyl Aceto Acetate
  2. Potassium Carbonate
  3. Bromine
  4. Triphenyl Phosphine
  5. Vulkacit Acid
  1. Methylene Chloride
  2. Isopropyl Alcohol
  3. Acetone
  4. Methanol
  5. Formic Acid
  6. Triethyl Amine
  7. Ethyl Hexanate/ 2-Ethyl Hexanoic acid

0.741 kg.

1.025 kg.

0.965 kg.

1.44 kg.

0.76 kg.

1.23 kg.

1.49 kg.

5.20 kg.

4.68 kg.

1.51 kg.

5.23 kg.

1.19 kg.

0.41 kg.

0.40 kg.

-:5:-

13.

15

Chemicals & AlliedProducts

Sr.No.A2263 ( As amended vide Public Notice No. 26 dt. 04.08.99)

The description of the import item at Sr. No. 6 shall be amended (without any change in the quantity) to read as under:-

“2-METHOXY PROPANE”

14.

17

Chemicals & AlliedProducts

Sr.No.A2293 ( As amended vide Public Notice No. 37 dt. 01.11.99)

The quantity of the import item at Sr. No. 1 shall be corrected to read as under:-

“0.0525 kg. instead of 0.525 kg”.

15.

23

Chemicals & AlliedProducts

Sr.No.A2339 (Introduced vide Public Notice No. 46 dt. 3.1.2000)

The norm covered by this entry shall be deleted.

16.

25

Chemicals & AlliedProducts

Sr.No.A2352 (Introduced vide Public Notice No. 46 dt. 3.1.2000)

The description of the import item at Sr. No. 1 indicated as “( Tin Oxide )” shall be deleted.

17.

335

Electronics Products

Sr.No.B111

 

1. The description of the import item at Sr. No. 16 shall be amended (without any change in the quantity) to read as under:-

 

“Inductor/Cell”

 

2. The description of the import item at Sr. No. 22 shall be amended (without any change in the quantity) to read as under:-

“Adhesive/non-adhesive front housing logo label paper or Adhesive/non-adhesive plastic labels”.

 

-:6:-

 

3. The description of the import item at Sr. No. 5 shall be amended (without any change in the quantity) to read as under:-

“Hardware Parts for pagers:-

(i) Screws – Net+2%

(ii) Shield – Net+2%

(iii)Lanyard – Net+2%”

4. The description of the import item at Sr. No. 23 shall be amended (without any change in the quantity) to read as under:-

“Double Sided ESD Tape”.

5. After import item No. 46 the following item with quantity shall be added:-

“47. Boots – Net+2%

48. Battery contacts – Net+2%

49. Pads – Net+2%

50. Bracket – Net+2%

51. Back up battery – Net+2%

52. Lens – Net+2%

53. Light Wedge – Net+2%

54. Snubber – Net+2%

55. Latch – Net+2%”.

 

18.

401

Engineering Products

Sr.No. C188

The description of import item at Sr. No. 1(a) shall be amended to read as:-

“Super Enamelled Copper Wire / Copper Wire Rod”.

19.

402

Engineering Products

Sr.No. C189

The description of import item at Sr. No. 1(a) shall be amended to read as:-

“Super Enamelled Copper Wire / Copper Wire Rod”.

-:7:-

20.

410

Engineering Products

Sr. Nos. C208 to

C-212

The descriptions of import item at Sr. No. 1 shall be amended to read as:-

“CRGO Steel Sheets/ CRNGO Steel Sheet”.

21.

22.

644

Engineering Products

Sr.No.C1175

The norm covered by this entry shall be substituted by the following:-

Sr.No.

Item of Export

Qty.

Item of Import

Qty. Allowed

C1175

Condensor/Evaporator Coils used as Heat exchangers for Airconditioning and Refrigerator purpose.

1 kg

  • Copper Tubes refrigeration Quality-Dia 1/4″-1/2″
  • Aluminium Fin Stock thickness 0.10 mm to 0.20 mm
  • Brazing materials
  • U Bends and Tripods

1.05 kg/kg content in export product

1.10 kg/kg content in export product

0.5% of FOB value

net to net.

-:8:-

23.

667

Engineering Products

Sr.No. C1327

Norm covered by this entry shall be substituted by the following:-

Sr.No.

Item of Export

Qty.

Item of Import

Qty. Allowed

C1327

Auto Transformer ( variable voltage ) (a) upto 30 KVA 1 phase or 90 KVA 3 phase

(b) Above 30 KVA 1 phase or 90 KVA 3 phase and upto 130 KVA 1 phase or 390 KVA 3 phase

1 No.

  • CRGO steel laminations/ sheets/ Coil/Slits/Cuts
  • Copper winding wires/strips/Wire bars/Wire Rods/Cathodes
  • Carbon in brushes/Blocks/ Rollers
  • Brush Holder assembly
  • Servo Motor Magnets for Motors
  1. CRGO steel laminations/sheets/ Coil/Slits/Cuts
  2. Copper winding wires/strips/Wire bars/Wire Rods/ Cathodes
  3. Carbon in brushes /Blocks/ Roller
  4. Brush Holder assembly
  5. Servo Motor Magnets for Motors
  • kg. per KVA

 

0.78 kg. per KVA

 

  1. Cub. Cm. Per KVA

Net to net

Net to net

  1. kg. per KVA

 

0.77 kg. per KVA

 

  1. Cub. Cm. Per KVA

Net to net

Net to net

-:9:-

(c) above 130 KVA 1 phase or 390 3 phase

  • CRGO Steel laminations/ sheets/Coil/Slits/Cuts
  • Copper winding wires/strips/Wire bars/Wire Rods/Cathodes
  • Carbon in brushes/Blocks/ Rollers
  • Brush Holder assembly
  1. Servo Motor Magnets for Motors

1.71 kg. per KVA

0.6 kg. per KVA

  1. Cub. Cm. Per KVA

Net to net

Net to net

24.

672

Engineering Products

Sr.No. C1343

The quantity of the import item ABS Granules at Sr. No. 8 shall be amended to read as :-

“1.05 kg/kg content in the export product instead of 120 kg”.

25.

13

Engineering Products

Sr.No.C1391 (As amended vide Public Notice No. 50 dated : 02/02/2000)

A. COMPONENTS

The description and quantity of import item at Sr. No. 7 shall be amended to read as under:-

“7. Outer Gasket or Synthetic Rubber

(Buna/NBR) 700 gms for 1000 Nos.

Gasket”.

31.

790

Plastic Products

Sr.No.H5

In the import item at S.No. 8, after the description BHT, the following shall be added without any change in quantity:-

“IRGONOX – 1076”.

-:10:-

27.

32

Miscellaneous Products

Sr.No.K122 (Introduced vide Public Notice No. 46 dated : 03/01/2000)

CORRIGENDUM

The quantity of import item at Sr. No. 4 shall be corrected as under:-

“0.166 Sq. Mtrs.”

28.

33

Miscellaneous Products

Sr.No.K123 (Introduced vide Public Notice No. 46 dated : 03/01/2000)

CORRIGENDUM

The quantity of import item at Sr. No. 4 shall be corrected as under:-

“0.174 Sq. Mtrs.”

29.

35

Miscellaneous Products

Sr.No.K124 (Introduced vide Public Notice No. 46 dated : 03/01/2000)

CORRIGENDUM

The quantity of import item at Sr. No. 4 shall be corrected as under:-

“0.183 Sq. Mtrs.”

-:11:-

Annexure “B” to the

Public Notice No.51

Dated: 01/03/2000

CHEMICALS AND ALLIED PRODUCTS

Sr.No.

Item of Export

Qty.

Item of Import

Qty. Allowed

A2387

FMOC-ONSU (9-Fluorenyl Methyl Succinimidyl Carbonate)

1 kg

1. Fluorene

2. Dimethyl Formamide

3. N-Hydroxy Succinimide

OR

  1. Succinahydride
  2. Hydroxylamine HCI.
  1. Ethyl Formate

2.14 kg.

3.22 kg.

  1. kg.

1.60 kg.

1.28 kg.

1.91 kg.

A2388

CIPROFLOXACIN LACTATE MONOHYDRATE

1 kg

1. 2,4 Dichloro 5-Fluoro Acetophenone

2. Dimethyl Carbonate

3. Sodium Hydride

4. Dimethyl Formamide

5. Potassium Carbonate

6. Cyclo Propyl Amine

7. Piperazine Anhydride

1.54 kg.

1.74 kg.

0.52 kg.

1.74 kg.

1.14 kg.

0.30 kg.

0.798 kg.

A2389

2-Mercapto-5-Methoxy Benzimidazole

1 kg

1. Para Anisidine

2. Ethyl Acetate

3. N-Butyl Alcohol

1.28 kg.

1.00 kg.

0.51 kg.

A2390

Trinonyl Phenyl Phosphite (TNPP)

1 kg

  1. Nonyl Phenol

2. Tri Iso Propanol Amine

0.9343 kg.

0.0057 kg.

-12:-

A2391

Inhalers

1 No.

1. Relevant Bulk Drug (as per Drug Manufacturing Licence)

2. Aerosol Valves of relevant size

3. Aluminium Can of relevant size

4. Actuator with dust covers/ cap of relevant size

Net to net

1.01 nos.

1.01 nos.

1.01 nos.

A2392

3:4 Diamino Benzophenone

1 kg

1. Para Chloro Toluene

2. Dimethyl formamide

3. Methanol

0.953 kg.

0.200 kg.

0.250 kg.

A2393

3- Carbamoyl-4 Methyl- 6- Hydroxy N-Ethyl -2 Pyridone

1 kg

1. Ethyl Gyana Acetate

2. Aceto Acetic Methyl Ester

3. Mono Ethyl Amine 70%

0.854 per kg.

0.876 per kg.

0.486 per kg.

A2394

Disperse Red 91 100% dyes content

1 kg

1. 1-Amino Anthraquinone

2. 1:6 Hexanediol

0.935 kg.

0.410 kg.

A2395

Vat Brown 1 (Vat Brown BRCDP) (Dye content 98%)

1 kg

1. Anthraquinone

2. Quinizarine

3. Pyridine

4. Nitrobenzene

5. Caustic Soda flakes

1.240 kg

0.552 kg

0.380 kg.

1.050 kg.

3.190 kg

A2396

Direct Yellow 11 (50% dye content)

1 kg

1. Para Nitro Toluene

0.374 kg.

-:13:-

A2397

Geranyl Nitrite (Min. purity 98%)

1 kg

1. Citral

2. Hydroxylamine Sulphate

1.333 kg.

0.612 kg.

A2398

Dipped Belting Fabrics (EP) (conveyor Duck / Synthetic Fabrics of Nylon 6/66 & Polyester 840 denier & above 28:72

1 MT

1. Polyester Industrial Yarn

2. Relevant Industrial Yarn (Nylon 6/66)

3. V.P. Latex

4. Resorcinol

5. Formaldehyde

6. Bonding Agent (Grill bond / coca Bond vulce Bond-E)

745 kg

305 kg

65 kg

7 kg

10 kg

5 kg

A2399

Diphenyl Isodecyl Phosphite (DPOP)

1 kg

  1. Phenol

2. Isodecyl Alcohol

0.558 kg.

0.419 kg.

A2400

C-8 ( 3-Hydroxy Naphthalene-2 Carbonyl -( 3 Morpholine – Propyl-Amine)

1 kg

1. 4- (3 Amino Propyl) Morpholine

2. BON Methyl Ester

0.600 kg.

0.841 kg

A2401

(S)-Valine-Cyclic Urea (Wing B)

1 kg

1. (L)-Valine or (S) Valine

2. Aerylonitrile

3. Methyl Chloroformate

1.837 kg.

0.95 kg.

2.25 kg.

A2402

Potassium Pyro Antimonate

1 kg

1. Antimony Trioxide

2. Potassium Hydroxide

0.978 kg.

0.300 kg.

-:14:-

Annexure “C” to the

Public Notice No.51

Dated: 01/03/2000

ENGINEERING PRODUCTS

Sr.No.

Item of Export

Qty.

Item of Import

Qty. Allowed

C1501

Low Carbon Ferro Manganese

1 MT

  1. Aluminium Ingot/ Aluminium Powder

500 kg.

C1502

Medium Carbon Ferro Manganese

1 MT

  1. Aluminium Ingot/ Aluminium Powder

250 kg.

C1503

Continuous Cast Copper Rod/ Cathodes

1 MT

  1. Copper concentrate

1.06 MT/MT of Copper content in the export product.

C1504

Cold Rolled Non Grain oriented Silicon electrical Steel Sheets/ coils in fully/ semi processed state.

1000 kg.

1. Hot Rolled Alloy Steel Coils

2. Organic Coating/ Inorganic Coating

3. Pickling Oil

4. St0eel Stripping

5. VCI Rusto paper

1125 kg.

5 kg.

0.5 kg.

As per packing policy

As per packing policy

C1505

Hermatic Compressor

1 No.

1. Relevant Valve Plate

2. Relevant Gas pump assembly

3. Crankshaft Assembly

4. Suction Valve

5. Discharge Valve

6. Cylinder Head

7. Stator

8. PTC Relay below 7 AMP

9. Bi-metal thermostat/ motor protector

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

-:15:-

C1506

Identifiable ready- to-use machined parts/ components made wholly or predominantly of Carbon Steel/Non Alloy Steel (not less than 90% by weight) manufactured through forging process, not elsewhere specified.

1 kg.

1. Forging Quality Carbon Steel/ Non Alloy Steel Bars/ Rods/ Billets/ Blooms/ Ingots (Relevant Material)

2. Chemicals Rust Preventing Oil/ Primer/ Paints

3. Miscellaneous items: Refractory material, Die Steel/ Die Blocks, Cutting Tools, Cutters Sawing Blades including bimetallic Bandsaw blades steel shots, fuel oil, heat treatment chemicals, quenching oil and lubricants.

1.60 Kg/kg content in export

2% of the FOB value of export

4% of the FOB value of exports.

C1507

Identifiable ready to use machined parts/ components made wholly or predominantly of Alloy Steel/ Stainless Steel (not less than 90% by weight) manufactured through forging process, not elsewhere specified.

1 kg

1. Forging Quality / Alloy Steel/Stainless Steel Bars/ Rods/ Billets/ Blooms/Ingots (Relevant Material)

2. Chemicals: Rust Preventing Oil/ Primer Paints

1.60 kg/kg content in export

2% of the FOB value of exports

-:16:-

  • Miscellaneous items: refractory material, Die Steel/ Die Blocks Cutting Tools, Cutters, Sawing Blades including

bimetallic

Bandsaw blades

steel shots, fuel

oil, heat treatment

chemicals,

quenching oil and

lubricants.

4% of the FOB value of exports

C1508

Identifiable ready to use machined parts/ components made wholly or predominantly of Iron(not less than 90% by weight) manufactured through casting process, not elsewhere specified.

1 kg

  1. Pig Iron

1.25 kg

 

Note: The above norms are for the export product wholly made of Pig iron. For the export product constituting Pig Iron less than 100% and upto 90% by weight, the import requirement of Pig iron shall be proportionately reduced.

 

-:17:-

C1509

Identifiable ready to use machined parts/ components made wholly or predominantly of Carbon Steel / Non Alloy Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified.

1 MT

1. Major Raw materials comprising of : Carbon Steel / Non-Alloy Steel Melting Scrap

2. Additives comprising of:

a. Core Wire/Scrap/ Ingots/Shots of Aluminium

b. Core Wire/Lumps Powder of Calcium Silicide (CaSi)

1700 kgs.

50 kgs

  • Lumps / Powder of Misch Metal
  • Ferro Silicon
  • Ferro Manganese
  1. Miscellaneous items:
  1. i) Resin Coated Sand

ii) Organic binders

  1. i) Graphite electrode

ii) Welding

Electrode

iii) Mould Wash

/ Mould coat

iv) Grinding

Wheel

v) Refractories:

  1. Porous

 

Plugs/Seat Blocks/ Sleevers/ Slide Gate Plates

 

450 kgs

200 kgs.

  1. kgs.

12.5 kgs.

31 kgs.

6 kgs.

37.5 kgs.

-:18:-

a. Direct Bonded

 Basic Bricks

b.Monolithic/ Gunning/ Ramming/ Castables

c. Dolomite/ Magnesia Carbon Bricks

vi) Industrial X- Ray Film (Various Grades for Gamma Rays Iridium 192 & Cobalt 60)

  1. Furnace Oil/ Diesel Oil for
  1. Ladle heating
  2. Moulding Heating
  3. Heat Treatment

9440 Sq.Cm.

265 Ltrs.

 

Note 1. : The above norm is applicable only if the export products are manufactured through electric Arc Furnace / Induction Finance Route using melting Scrap as shown at item No. 1(a).

  1. : In case the products are manufactured through the Induction Furnace Route, the item 3(b) (i) will not be allowed.
  2. : The above norms are for the export product wholly made of Non Alloy Steel. For the export product constituting less than 100% and upto 90% No Alloy Steel by weight, the import requirements of import items at Sr. No. 1 to 3 shall be proportionately reduced.

-:19:-

C1510

Identifiable ready to use machined parts/ components made wholly or predominantly of Alloy Steel ( other than Stainless Steel) (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified.

1 MT

1. Major Raw Materials comprising of:

a. Non-Alloy Steel Melting Scrap

b. Ferro Alloys comprising of:

i. Charge Ferro Nickel/ Nickel Oxide Sinter

OR

Nickel

1594 kgs.

75 kgs.

30 kgs.

  • Ferro Chrome
  • Ferro Manganese
  • Ferro Molybdenum
  • Ferro Silicon
  1. Additives comprising of:
  1. Core wire/Scrap / Ingots / shots of Aluminium
  2. Calcium silicide (CaSi)
  3. Selenium
  4. Lumps/Powder of Misch Metal
  1. Miscellaneous items
  1. i) Resin coated Sand

21 kgs.

25 kgs.

31 kgs.

25 kgs.

6 kg

450 kg

-:20:-

 

ii) Organic binders

 

  • i) Graphite Electrode

 

ii) Welding electrode

iii) Mould Wash/ Mould Coat

 

  1. Grinding Wheel
  2. Refractories

 

a) Porous Plugs/ Seat Blocks/ Sleeves/ Slide Gate Plates

b) Direct Bonded Basic Bricks

c) Monolithic/ Gunning/ Ramming/ Castables

d) Dolomite / Magnesia Carbon Bricks

vi) Industrial X-Ray Film (various Grades for Gamma Rays Iridium 192 & Cobalt 60)

 

  1. Furnace Oil/ Diesel Oil for
  1. Ladle Heating
  2. Mould Heating
  3. Heat treatment

200 kg

7.5 kg

12.5 kg

31 kg

6 kg

37.5 kg

9440 Sq. cm.

265 Ltrs.

-:21:-

C1511

Identifiable ready to use machined parts/ components made wholly or predominantly of Stainless Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified.

1 MT

1. Major Raw Materials comprising of:

  1. Stainless Steel Melting Scrap
  2. Iron Flakes/ Pure Iron/ Iron Powder
  3. i) Ferro Chrome

 

ii) Charge Nickel Oxide Sinter/ Ferro Nickel

OR

 

c) i) Ferro Chrome

ii) Nickel

 

iii)Ferro Manganese

iv) Ferro Molybdenum

v) Ferro Silicon

 

862.5 kg

387.5 kg.

400 kg.

87.5 kg.

125.0 kg.

12.5 kg.

62.5 kg.

25 kg.

1. Additives comprising of:

  1. Core wire/Scrap/ Ingots/ shots of Aluminium
  2. Core wire/ Ingots/ powder of Calcium silicide (CaSi)
  3. Selenium
  4. Lumps/Powder of Misch Metal
  1. Miscellaneous items
  1. i) Resin coated Sand
  1. ii) Organic binders
  • kg.

1562.5 kg.

200 kg.

-:22:-

a. i) Graphite Electrode

 

ii) Welding electrode

iii) Mould Wash/ Mould Coat

iv)Grinding

Wheel

v) Refractories

 

  1. Porous Plugs/ Seat Blocks/ Sleeves/ Slide Gate Plates
  2. Direct Bonded Basic Bricks

 

c)Monolithic/ Gunning/ ramming/ Castables

d) Dolomite / Magnesia Carbon Bricks

 

  1. Industrial X-Ray Film (various Grades for Gamma Rays Iridium 192 & Cobalt 60)
  1. Furnace Oil / Diesel Oil for
  1. Ladle Heating
  2. Mould Heating
  3. Heat Treatment

7.5 kg.

12.5 kg.

31.25 kg.

6.25 kg.

37.5 kg.

9440 Sq.cm.

265 Ltr.

 Note:1.The above norm is applicable only if the export product are manufactured through Electric Arc Furnace/ Induction furnace Route using Melting Scrap as shown at item No. 1(a)

2. : In case the products are manufactured through the induction FurnaceRoute, the item 3 (b) (i) will not be allowed.

3. : The above norms are for the export product wholly made of Stainless Steel. For the export product constituting Stainless Steel less than 100% and upto90% by weight, the input requirements of import items at Sr. No. 1 to 3 shall be proportionately, reduced.

-:23:-

C1512

Refrigerator Display Cabinet (Capacity to be Indicated)

1 No.

1. Electro Galvanised Steel sheets pre-painted 0.5 mm thick

2. Relevant Stainless steel sheet 0.4 mm thick

3. ABS/HIF with GPPS (General Purposel poly sheets)

4. Polyurethane foam chemical total foam weight:-

1.03 kg/kg content in the export product

1.03 kg/kg content in the export product

1.03 kg/kg content in the export product

a. Polyol

b. Isocyanate

c. Cyclo-pentane

  1. Relevant Hermetically sealed compressors
  2. Relevant Fan Motors
  1. Evaporator cooling
  2. Compressor/ condensor cooling
  • Relevant thermostate
  1. Copper tube 6.350×0.6 mm thick

1.03 kg/kg of content in the export product

1.03 kg/kg of content in the export product

1.03 kg/kg of content in the export product

one set on net to net

on net to net basis

on net to net basis

1 No.

1.03 kg/kg of content in the export product

-:24:-

  • Copper capillary tube
  • Relevant Filter Drier(Copper)
  • Relevant Evaporator (cu tube, A1 fin)
  • Relevant Condensor (cu tube, A1 fin)

1.03 kg/kg of content in the export product

1 No.

1 No.

1 No.

C1513

Pneumatic Tool-Clay Digger (Picks) with outside Trigger, Throttle Latch Retainer

1 No.

1. Relevant Air Inlet Nipple

2. Relevant Head Bolt

3. Relevant Piston

4. Relevant Cylinder

5. Relevant Fronthead

6. Relevant Throttle Valve

7. Relevant Latch Retainer Bolt

8. Relevant Valve Block

9. Relevant Valve

10. Relevant Chuck bushing

11. Relevant Retainer-Latch

12. Relevant Lever-Throttle Valve

13. Relevant Handle Assembly

14. Relevant Latch Ret Bolt Bushing

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

 Note : The import of components shall be allowed on net to net basis with accountability clause.

-:25:-

C1514

Pneumatic Tool-Light Simplate Valve Temper with Bore and Stroke size 17/16″ X 6″ (36.5mm X 152.45 mm)

1 No.

1. Relevant Elbow

2. Relevant Air Strainer

3. Relevant throttle valve Lever

4. Relevant throttle Valve Body

5. Relevant throttle Valve

6. Relevant Nipple

7. Relevant Cylinder Head Assembly

8. Relevant Oil Regulating Plug

9. Relevant Upper Valve case Lid

10 .Relevant Valve case

11. Relevant Lower Valve case lid

12. Relevant Exhaust Deflector

13. Relevant Piston with Plug Assembly

14. Relevant Cylinder

15. Relevant Retainer Nut

16. Relevant Retainer

17. Relevant Piston Rod Bushing

18. Relevant Piston PKG

19. Relevant Piston Bushing

20. Relevant Aluminium Butt

21. Relevant Lock nut

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

Note : The import of components shall be allowed on net to net basis with accountability clause.

-:26:-

C1515

Pneumatic Tool- Heavy duty Ring volve Temper with Bore and Stroke size upto 2 1/4″ X 6″ (two and quarter inch X six inch) (57.2mm X 152 mm)

1 No.

1. Relevant Streat Elbow

2. Relevant Air Strainer

3. Relevant Throttle Valve Lever

4. Relevant Throttle Valve Body

5. Relevant throttle Valve

6. Relevant Nipple

7. Relevant Cylinder Head Assembly

8. Relevant Valve Lid

9. Relevant Valve

10. Relevant valve Box

11. Relevant Lock Clip

12. Relevant Exhaust Clip

13. Relevant Piston with Plug Assembly

14. Relevant Cylinder & Bushing Assembly

15. Relevant Piston Packing

16. Relevant Lock Clip

17. Relevant Piston Gland nut

18. Relevant Piston Gland Sleeve

19. Relevant Butt

20. Relevant Lock Nut

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

 Note : The import of component shall be allowed on net to net basis with accountability clause.

-:27:-

C1516

Pneumatic Tool- Rammer

1 No.

1. Relevant Valve

2. Relevant Throttle valve lever

3. Relevant Throttle Valve Bushing

4. Relevant Cylinder Head

5. Relevant Upper Valve Case Lid

6. Relevant Valve Case

7. Relevant Lower Valve Case Lid

8. Relevant Piston & Plug Assembly

9. Relevant Cylinder & Bushing Assembly

10. Relevant Bushing

11. Relevant Piston Packing

12. Relevant Piston Bushing

13. Relevant Check Nut

14. Relevant retainer

15. Relevant Rubber Butt

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

Note : The import of components shall be allowed on net to net basis with accountability clause.

-:28:-

C1517

Pneumatic Tool Clay Digger round (picks) with outside trigger Sleeve Retainer and round/Square Chuck

1 No.

 1. Relevant Cylinder

2. Relevant Sleeve

3. Relevant Handle & Bush Assembly

4. Relevant Lever

5. Relevant Lever Pin

6. Relevant Throttle Valve

7. Relevant Retainer sleeve

8. Relevant Valve

9. Relevant Piston

10. Relevant Upper Valve Case Lid

11. Relevant Lower Valve Case Lid

12. Relevant Valve Case

13. Relevant Back Head Bolt

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

2 Nos.

Note : The import of components shall be allowed on net to net basis with accountability clause.

Join Taxguru’s Network for Latest updates on Income Tax, GST, Company Law, Corporate Laws and other related subjects.

Leave a Comment

Your email address will not be published. Required fields are marked *

Search Post by Date
May 2024
M T W T F S S
 12345
6789101112
13141516171819
20212223242526
2728293031