(TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY
PART-1-SECTION-1)
GOVERNMENT OF INDIA
MINISTRY OF COMMERCE & INDUSTRY
DEPARTMENT OF COMMERCE
PUBLIC NOTICE NO.70 (RE- 03)/ 2002-2007
NEW DELHI : DATED : 29/06/2004.
Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.
2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of Foreign Trade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.
3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure “A” to this Public Notice shall be made.
4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-
CHEMICALS AND ALLIED PRODUCTS
After the existing entry at Sr. No.A-3332, new entries at Sr. No. A-3333 to A-3378 shall be added as per Annexure ”B” to this Public Notice.
-:2:-
ENGINEERING PRODUCTS
After the existing entry at Sr.No.C-1967, new entry at Sr.No.C-1968 to C-1975 shall be added as per Annexure “C” to this Public Notice.
FOOD PRODUCTS
After the existing entry at Sr.No.E-114, new entries at Sr.No. E-115 to E-117 shall be added as per Annexure “D” to this Public Notice.
TEXTILE PRODUCTS
After the existing entry at Sr.No.J-359, new entry at Sr.No.J-360 to J-361 shall be added as per Annexure “E” to this Public Notice.
5. This issues in public interest.
( GOPAL K. PILLAI )
DIRECTOR GENERAL OF FOREIGN TRADE
(R. C. SAINI)
DY. DIRECTOR GENERAL OF FOREIGN TRADE
FOR DIRECTOR GENERAL OF FOREIGN TRADE
-:3:-
Annexure “A” to the
Public Notice No. 70
Dated: 29/06/2004
AMENDMENTS/CORRECTIONS
| Sr.
No. |
Page
No. |
Reference | Amendments/Corrections | |
| 1 | 2 | 3 | 4 | |
| 1. | 39 | Chemical & Allied Product
Sr.No.A177 |
The description of import item at Sr. No. 5(d), (without any change in quantity) shall be amended to read as under:-
“Methyl Aceto Acetate” |
|
| 2. | 3 | Chemical & Allied Product
Sr.No.A366 (amended vide Public Notice No. 35 Dated:05/12/2003) |
The description of import item at Sr. No. 1, (without any change in quantity) shall be amended to read as under:-
“Iodine/Iodine Crude other than Pharma Grade” |
| 3. | 84-85 | Chemical & Allied Product
Sr.No.A554 |
The description of export item shall be amended to read as under:-
“Carbazole Dioxazine Violet Pigment Crude (Pigment Violet 23) (C.I. No. 51319)” |
| 4. | 87 | Chemical & Allied Product
Sr.No.A570 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A570 | Copper Phthalo Cyanine Green | 1 kg | 1. Copper Phthalo Cyanine Blue Crude
2. Aluminium Ingots OR Aluminium Chloride Anhydrous 3. Caustic Soda Lye on 100% basis 4. Cupric Chloride anhydrous |
0.537 kg.
0.540 kg. 2.016 kg 0.760 kg. 0.063 kg. |
-:4:-
| 5. | 3 | Chemical & Allied Product
Sr.No.A661 (amended vide Public Notice No. 23 Dated:10/09/2003) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A661 | Fast Red B Base (4-Nitro ortho Anisidine) | 1 kg | 1. Ortho anisidine
2. Acetic Anhydride 3. Caustic Soda Flakes |
1.190 kg.
0.977 kg. 1.005 kg. |
| 6. | 148 | Chemical & Allied Product
Sr.No.A1096 |
In the import item at Sr. No. 1, the following (without any change in quantity) shall be amended to read as under:-
“OR Cobalt Metal purity 99.3% Forms: Broken cathodes/ Briquttes/ Ingot/ Granules/ Powder ” |
| 7. | 151 | Chemical & Allied Product
Sr.No.A1127 |
The description of import item at Sr. No. 2, (without any change in quantity) shall be amended to read as under:-
“Iodine/Iodine Crude other than Pharma Grade” |
| 8. | 153 | Chemical & Allied Product
Sr.No.A1166 |
The description of import item at Sr. No. 1, (without any change in quantity) shall be amended to read as under:-
“Selenium Metal Powder/ Pellet/ Lumps/ Ingots/ Slots/ Bar” |
| 9. | 153 | Chemical & Allied Product
Sr.No.A1167 |
The description of import item at Sr. No. 1, (without any change in quantity) shall be amended to read as under:-
“Selenium Metal Powder/ Pellet/ Lumps/ Ingots/ Slots/ Bar” |
-:5:-
| 10. | 3 | Chemical & Allied Product
Sr.No.A1170 (amended vide Public Notice No. 55 Dated:03/03/2004) |
The foot note below this entry shall be amended to read as under:-
“Note: CIF value of item (5) & (6) together shall not exceed 10% of FOB value” |
| 11. | 155 | Chemical & Allied Product
Sr.No.A1188 |
The description of import item at Sr. No. 1, (without any change in quantity) shall be amended to read as under:-
“Selenium Metal Powder/ Pellet/ Lumps/ Ingots/ Slots/ Bar” |
| 12. | 168 | Chemical & Allied Product
Sr.No.A1376 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1376 | Linear Alkyl Benzene (For HF Process)
OR Linear Alkyl Benzene (For Detal Process) |
1 kg
1 kg |
1. Kerosene Oil
2. Benzene 3. Dehydrogenation catalyst for Pacoi Process (DeH-7, DEH-11, DeH-101 & DeH 201, DeH – 2 & NDC – 4 & the like 4. HF Acid 5. KOH 6. Normal Pentane 7. Iso-Octane 8. Fuel Oil/ LSWR 9. Heat transfer Oil OR 1. Kerosene Oil 2. Benzene |
1.000 kg
0.400 kg 0.00035 kg 0.002 kg 0.002 kg 0.007 kg 0.0001 kg 1.000 kg 0.0045 kg OR 1.000 kg 0.400 kg |
-:6:-
| 3. Dehydrogenation catalyst for Pacoi Process (DeH-7, DEH-11, DeH-101 & DeH 201, DeH – 2 & NDC – 4 & the like
4. Detal Catalyst 5. PEP Adsorbent 6. Define Catalyst 7. Normal Pentane 8. Iso Octane 9. Fuel Oil/ LSWR 10. Heat Transfer Oil |
0.00035 kg
0.00081 kg 0.00017 kg 0.00004 kg 0.005 kg 0.0001 kg 1.000 kg 0.0045 kg |
| 13. | 3 | Chemical & Allied Product
Sr.No.A1381 (amended vide Public Notice No. 55 Dated:03/03/2004) |
The description of import item at Sr. No. 1, (without any change in quantity) shall be amended to read as under:-
“Crude Fumaric Acid (Purity 90%)” |
| 14. | 183 | Chemical & Allied Product
Sr.No.A1534 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1534 | Zinc salt of 2 mercapto Benzothiazole (Active content 93%) | 1 kg | 1. 2-Mercapto Benzothiazole (95%)
OR 1(i) Aniline 1(ii) Carbon Disulphide 1(iii) Sulphur 2. Zinc Chloride 40% 3. Ammonia 4. Caustic Soda Lye |
0.764 kg.
0.527 kg. 0.51 kg. 0.203 kg. 0.897 kg. 0.032 kg. 0.235 kg. |
-:7:-
| 15. | 207 – 208 | Chemical & Allied Product
Sr.No.A1687 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1687 | General Purpose Metal Fitted/ Metal Bonded/ Metal Un-bonded Rubber parts (Moulded/ Extruded) including Engine Mounting & Automotive Parts | 1 kg | 1. Mild steel sheets/ coil/ plates/ rounds/ strips
2. Relevant Rubber compound consisting of the following: 2(a) Relevant natural Rubber/ Relevant Synthetic Rubber |
1.30 Kg./Kg. content in the export product.
0.63 Kg/Kg. content of rubber |
| namely, SBR/PBR
of relevant grade except SBR 1900 series i.e. HSR, depending upon the description of the product to be exported. 2(b) Carbon Black 2(c) Zinc Oxide 2(d) Rubber Chemical viz. Antioxidants/ accelerators /Retarder and Pepitizer. |
compound in the export product
0.126Kg/Kg. content of rubber compound in the export product 0.0315 Kg./ Kg. content of rubber compound in the export product. 0.012 Kg./ Kg. content of rubber compound in the export product. |
-:8:-
| 2(e) Misc. Chemicals
viz. Stearic acid, insoluble sulphur, silicon oil 3. Bonding agent for metal bonded parts |
0.042 Kg./ Kg. content of rubber compound in the export product.
0.01 Kg/Kg. of steel in the export product. |
| 16. | 208 | Chemical & Allied Product
Sr.No.A1688 |
1. The description of export product shall be amended to read as under:-
“General purpose Moulded goods of Synthetic Rubber only SBR/PBR” 2. The description of import item at Sr. No. 1, (with any change in quantity) shall be amended to read as under:- “1. Relevant SBR/PBR of relevant grade except SBR 1900 series i.e. HSR”. |
| 17. | 211 | Chemical & Allied Product
Sr.No.A1704 |
1. The description of export product shall be amended to read as under:-
“General purpose Relevant Natural Rubber/ Synthetic Rubber based Rubber compounded Sheets/ Rings/Gaskets” 2. The description of import item at Sr. No. 1, (with any change in quantity) shall be amended to read as under:- “1.Natural Rubber/ Relevant Rubber namely, SBR/PBR of Relevant grade except SBR 1900 series i.e. HSR” |
-:9:-
| 18. | 211 – 212 | Chemical & Allied Product
Sr.No.A1707 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1707 | General Purpose Rubber Gaskets (Rings) | 1 kg | 1. Natural Rubber
2. Synthetic Rubber namely, SBR/PBR of relevant grade except SBR 1900 series i.e. HSR. 3. Carbon Black 4. Zinc Oxide 5. Rubber Chemicals (Accelerator/Antioxidant/ Peptizers/ Retarders) 6. Miscellaneous Chemicals (Microcrystalline Wax) |
0.382Kg.
0.130Kg. 0.358Kg. 0.026Kg. 0.020Kg. 0.075Kg. |
| 19. | 240 | Chemical & Allied Product
Sr.No.A1872 |
1. The description of export product shall be amended to read as under:-
“Tinned Copper Insulated Wire EDC Detonators Or Copper Insulated Wire EDC Detonator” 2. The following foot note below this entry shall be added:- “Note: In case of export of Copper Insulated Wire, EDC Detonators Tin Ingots should not be allowed and instead the quantity of Copper Wire Rod may be allowed 6.1 kg. instead of 5.73 kg.” |
-:10:-
| 20. | 249 | Chemical & Allied Product
Sr.No.A1946 |
After the import item at Sr. No. 2, the following input item (with quantity) shall be added:-
“3. HSD/LDO – 0.510 litre/kg” |
| 21. | 271 | Chemical & Allied Product
Sr.No.A2118 |
After the description of import item at Sr. No. 21, the following additional import items (with quantity) shall be added:-
“22. Phosphorous Pentachloride – 0.99 kg 23. Dimethyl Aniline – 0.66 kg 24. Para Toluene Sulphonyl – 1.15 kg Chloride 25. Acetic Acid – 1.59 kg 26. Ethyl Acetate – 5.13 kg” |
| 22. | 271 – 272 | Chemical & Allied Product
Sr.No.A2119 |
After the description of import item at Sr. No. 17, the following additional import items (with quantity) shall be added:-
“18. Phosphorous Pentachloride – 1.30 kg 19. Dimethyl Aniline – 0.794 kg 20. Para Toluene Sulphonyl – 1.515 kg Chloride 21. Acetic Acid – 2.09 kg 22. Ethyl Acetate – 6.75 kg” |
| 23. | 283 | Chemical & Allied Product
Sr.No.A2209 |
The norm covered by this entry shall be deleted. |
| 24. | 307 | Chemical & Allied Product
Sr.No.A2389 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2389 | U.V. Curable Printing Ink – Yellow, Flush Route (Pigment 10.2% +/- 1%) | 1 kg | 1. U.V. Flush Colour – Yellow (30% +/- 1% Pigment and 60 +/- 1% Polyester Acrylate / Urethane Acrylate/ Acrylic | 0.351 kg |
-:11:-
| Acrylate/ Epoxy Acrylate)
2. Polyester Acrylate OR 2. Acylic Acrylate OR 2. Urethene Acrylate OR 2. Epoxy Acrylate (75% Resin content in the Relevant Mopnomer) OR 2. Raw Materials for Epoxy Acrylate (75% resin content in the Monomer) 2 A Epoxy Resin 2 B Acrylic Acid 2 C Mono ethyl Hydro Quinone 2 D Benzyl Dimethyl Amine 2 E Relevant Reactive Monomer namely Tripropylene Glycol Diacrylate / Tri Methylol Propane Tri Acrylate/ Ethoxylated Tri Methylol Propane Tri Acrylate / Di Pentaerythritol Hexa Acrylate 3. Relevant Reactive Monomer namely Tripropylene Glycol Diacrylate / Tri Methylol |
0.412 kg
0.412 kg 0.412 kg 0.412 kg 0.22248 kg 0.087344 kg 0.00206 kg 0.00412 kg 0.104236 kg 0.103 kg |
-:12:-
| Propane Tri Acrylate / Ethoxylated Tri
Methylol Propane Tri Acrylate / Di Pentaerythritol Hexa Acrylate 4. Photo Initiator Combo 5. P.E. Wax 6. Fumed Silica / Additive |
0.103 kg
0.011 kg 0.51 kg |
| 25. | 308 – 309 | Chemical & Allied Product
Sr.No.A2406 |
The description of export item shall be amended to read as under:-
“Ketoconazole BP/USP/EP” |
| 26. | 309 | Chemical & Allied Product
Sr.No.A2409 |
The description of import item at. Sr. No. 4, (without any change in quantity) shall be amended to read as under:-
“N, N-Dimethyl Carbomyl Chloride” |
| 27. | 315 | Chemical & Allied Product
Sr.No.A2452 |
The quantity of import item “Liquid Bromine” to read as under:-
“OR Liquid Bromine – 0.192 kg/kg” |
| 28. | 11 & 5 | Chemical & Allied Product
Sr.No.A2528 (Notified Vide Public Notice No. 03 Dated:31/03/2003) & (amended vide Public Notice No. 10 Dated;30/05/2003) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2528 | Linseed Oil Based Alkyd Resin (long Oil Length) having Solid content 100% | 1 kg | 1. Refined Linseed Oil
2. Isophthalic Acid 3. Pentaerythritol 4. Trimethylol Propane |
0.81 kg
0.15 kg 0.05 kg 0.03 kg |
-:13:-
| 29. | 5 & 7 | Chemical & Allied Product
Sr.No.A2529 (Notified Vide Public Notice No. 10 Dated:30/05/2003) & (amended vide Public Notice No. 20 Dated;01/08/2003) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2529 | Flush Black base for Printing Ink (46 +/- 1% Carbon Black and 41 +/-1% Solid Resin) | 1 kg | 1. Carbon Black
2. Relevant Alkyd Resin namely Soya Long Oil Alkyd Resin of 70% Oil Length having Solid content 100% / Linseed Oil based Alkyd Resin (Long Oil Length) having Solid content 100% 3. Printing Ink Vehicle –Plain (Solid content 61 +/-1%) (linseed Oil Base OR Soyabean Oil Base) 4. Petroleum Distillate (Distillation Range 240 – 330 Degree C) |
0.470 kg
0.300 kg 0.200 kg 0.050 kg |
| 30. | 337 | Chemical & Allied Product
Sr.No.A2653 |
The description of export product shall be amended to read as under:-
“2,2’ – Azobls (2 Amidino Propane) Dihydrochloride” |
| 31. | 337 | Chemical & Allied Product
Sr.No.A2655 |
After the import item at Sr. No. 3, the following additional input item (with quantity) shall be added:-
“4. Benzene Sulfonyl -1.10 Kg/Kg.” Chloride |
-:14:-
| 32. | 340 | Chemical & Allied Product
Sr.No.A2683 |
The norm covered by this entry shall be deleted. |
| 33. | 340 | Chemical & Allied Product
Sr.No.A2687 |
The description of export product shall be amended to read as under:-
“C3/C4 Hydrocarbons Viz. Propane, Propylene, Butane, Butylene/ Butene (Various grades), Liquified Petroleum Gas (LPG) (Various grades) and mixtures thereof” |
| 34. | Chemical & Allied Product
Sr.No.A2704 (amended vide Public Notice No.23 Dated:10.09.2003) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| 2704 | Printing Ink Vehicle – Gel (Solid content 59+/-1%) (Linseed Oil base OR Soyabean Oil Base) | 1 kg | 1. Relevant Alkyd Resin namely Soya Long Oil Length Alkyd Resin having Solid content 100% / Linseed Oil based Alkyd Resin (Long Oil Length) having Solid content 100%
2. Relevant Oil namely Refined Linseed Oil/ Soyabean Oil 3. Texanol Isobutyrate 4. Petroleum Distillate (Distillation Range 240 – 330 Degree Celsius) |
0.1050 kg
0.0200 kg 0.0520 kg 0.3600 kg |
-:15:-
| 5. Phenol Modified Rosin Ester/Rosin Modified Phenolic Resin (Technical Specification Acid values 25 max. softening point (R & B) 110 Degree – 120 Celsius)
6. Antioxidant namely BHT and MEHQ |
0.4600 kgs
0.0100 kg |
| 35. | 343 | Chemical & Allied Product
Sr.No.A2707 |
The description of import item at Sr. No. 2, (without any change in quantity) shall be amended to read as under:-
“Petroleum Distillate (Distillation range 240 centigrade – 330 centigrade)” |
| 36. | 350 | Chemical & Allied Product
Sr.No.A2765 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed | |
| A2765 | U.V. Flush Colour – Black containing 30% +/-1% Pigment and 60%+/-1% Polyester Acrylate/ Acrylic Acrylate/ Urethene Acrylate/ Epoxy Acrylate | 1000 kgs | 1. Pigment Carbon Black
2. Polyester Acrylate OR 2. Acrylic Acrylate OR 2. Urethene Acrylate OR |
306 kgs
612 kgs 612 kgs 612 kgs |
|
| 2. Epoxy Acrylate (75%
Resin content in the Relevant Monomer) OR |
612 kgs | ||||
-:16:-
| 2. Raw material for
Epoxy Acrylate (75% Resin Content in the Relevant Monomer) a) Epoxy Resin b) Acrylic Acid c) Mono Ethyl Hydro Quinone d) Benzyl Dimethyl Amine e) Relevant reactive Monomers namely Tri Propylene Glycol Divrylate/ Tri Methylol Propane Tri Acrylate / Ethoxylated Tri Methylol Propane Tri Acrylate/ Di Pentaerythritol Hex Acrylate 3. Relevant Reactive Monomers namely Tri Propylene Glycol Diacrylate/ Tri Methylol Propane Tri Acrylate/ Ethoxylated Tri Acrylate/ Di Pentaerythritol Hexa Acrylate 4. U.V. Inhibitor namely Phenothiazine/ Flourostab |
330.48 kgs
129.744 kgs 3.060 kg 6.120 kgs 154.8360 kgs 86.70 kgs 15.30 kgs |
-:17:-
| 37. | 350 – 351 | Chemical & Allied Product
Sr.No.A2766 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2766 | U.V. Flush Colour – Yellow (30% +/- 1% Pigment and 60 +/- 1% Polyester Acrylate / UretheneAcrylate/ Acrylic Acrylate/ Epoxy Acrylate) | 1000 kg | 1. Pigment Yellow – 12
OR 1. Raw materials for Pigment Yellow – 12 1(a)Dichlorobenzidine Di- hydrochloride 1(b) Acetoacetanilide 1(c) Rosin 1(d) Ammonium Sulphate 1(e) Sulphamic Acid 1(f) Acetic Acid 1(g) Caustic Soda 1(h) Sodium Nitrite 2. Polyester Acrylate OR 2. Acylic Acrylate OR 2. Urethene Acrylate OR 2. Epoxy Acrylate (75% Resin content in the Relevant Monomer) OR 2. Raw Materials for Epoxy Acrylate (75% Resin content in the Relevant Monomer) 2 A Epoxy Resin 2 B Acrylic Acid 2 C Mono Ethyl Hydro Quinone |
306.00 kg
221.85 kg 243.27 kg 29.99 kg 55.08 kg 1.53 kg 137.70 kg 144.43 kg 95.17 kg 612.00 kg 612.00 kg 612.00 kg 612.00 kg 330.48 kg 129.74 kg 3.06 kg |
-:18:-
| 2 D Benzyl Dimethyl
Amine 2 E Relevant Reactive Monomer namely Tripropylene Glycol Diacrylate / Tri Methylol Propane Tri Acrylate/ Ethoxylated Tri Methylol Propane Tri Acrylate / Di Pentaerythritol Hexa Acrylate 3. Relevant Reactive Monomer namely Tripropylene Glycol Diacrylate / Tri Methylol Propane Tri Acrylate / Ethoxylated Tri Methylol Propane Tri Acrylate / Di Pentaerythritol Hexa Acrylate 4. U.V. Inhabitor Pheno-thiazine / Flourostab |
6.12 kg
154.84 kg 86.70 kg 15.30 kg |
| 38. | 351 | Chemical & Allied Product
Sr.No.A2769 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2769 | U.V. Flush Colour – Cyan containing 30% +/-1% Pigment and 60%+/-1% Polyester Acrylate/ Acrylic Acrylate/ Urethene Acrylate/ Epoxy Acrylate | 1000 kgs | 1. Pigment Copper Phthalocyanine Blue (Pcb Free) C.I. No. 74610) (Pigment Blue 15)
OR |
306 kgs |
-:19:-
| 1. Raw material for
Pigment Copper Phthalocyanine Blue (PCB Free) (C.I. No. 74160) (Pigment Blue 15): a) Urea b) Phthalic Anhydride c) Copper Scrap d) Dichloro Toluene DCT e) Ammonium Molybdate 2. Polyester Acrylate OR 2. Acrylic Acrylate OR 2. Urethene Acrylate OR 2. Epoxy Acrylate (75% Resin content in Relevant Monomer) OR 2. Raw material for Epoxy Acrylate (75% resin content in relevant Monomer) a) Epoxy Resin b) Acrylic Acid c) Mono Ethyl Hydro Quinone d) Benzyl Dimethyl Amine |
457.164 kgs
336.600 kgs 37.332 kgs 44.370 kgs 3.060 kgs 612 kgs 612 kgs 612 kgs 612 kgs 330.48 kgs 129.744 kgs 3.060 kg 6.120 kgs |
-:20:-
| e) Relevant reactive Monomers namely Tri Propylene Glycol Diacrylate/ Tri Methylol Propane Tri Acrylate / Ethoxylated Tri Methylol Propane Tri Acrylate / Di Pentaerythritol Hex Acrylate
3. Relevant Reactive Monomers namely Tri Propylene Glycol Diacrylate/ Tri Methylol Propane Tri Acrylate / Ethoxylated Tri Methylol Propane Tri Acrylate / Di Pentaerythritol Hex Acrylate 4. U.V. Inhibitor namely Phenothiazine/ Flourostab |
154.8360 kgs
86.70 kgs 15.30 kgs |
| 39. | 353 | Chemical & Allied Product
Sr.No.A2793 |
The norm covered by this entry shall be deleted. |
| 40. | 355 | Chemical & Allied Product
Sr.No.A2800 |
The norm covered by this entry shall be deleted. |
-:21:-
| 41. | 35 | Chemical & Allied Product
Sr.No.A3160 (amended vide Public Notice No. 03 Dated: 31.03.2003) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3160 | Offset Printing Ink- Cyan (Pigment content 17 +/-1% and Solid resin 44 +/-1% (Flush Route) | 1 kg | 1. Flush Cyan for Printing Ink (40+/-1% Pigment & 31+/-1% Solid resin) | 0.4170 kg |
| 2. Printing Ink Vehicle – Gel (Solid content 59 +/-1%)
3. Printing Ink Vehicle – Plain (solid content 61+/-1%) 4. Polyethylene Wax compound containing 43+/-1% Polyethylene Wax 28+/-1% Tung Oil, 28+/-1% refined Linseed Oil 5. PTFE Wax compound containing 61%+/-1% PTFE Wax 33%+/-1% refined Linseed Oil 6. Cobalt Magnesium combined Drier (Metal content 12%+/-0.2%) 7. Petroleum Distillate (Distillation range 240-330 degree C) |
0.2575 kg
0.2575 kg 0.0310 kg 0.0020 kg 0.0103 kg 0.0412 kg |
-:22:-
| 42. | 14 | Chemical & Allied Product
Sr.No.A3216 (amended vide Public Notice No. 20 Dated: 01.08.2003) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3216 | Flush Magenta/ Rubine for printing ink (37 +/- 1% Pigment and 33 +/- 1% Solid Resin) | 1 kg | 1. Pigment Magenta/ Rubine namely Pigment Red 57:1 (C.I.No. 15850:1)/ Pigment Red 53:1 | 0.3890 kg |
| (C.I.No. 15850:1)
2. Printing Ink Vehicle –Plain (Solid content 61+/-1%) (Linseed Oil base or soyabean oil base) 3. Alkyd Resin namely Soya Long Oil alkyd Resinof 70% Oil Length having solid content 100% /Linseed Oil based Alkyd Resin (Long Oil Length ) having Solid content 100% 4. Petroleum Distillate (Distillation Range 240-330 Degree C) 5. Oleyl Alcohol 6. Antioxidant 7. Texanol Iso Butyrate |
0.3930 kg
0.1000 kg 0.1220 kg 0.0120 kg 0.0100 kg 0.0230 kg |
-:23:-
| 43. | 16 | Chemical & Allied Product
Sr.No.A3221 (amended vide Public Notice No. 20 Dated: 01.08.2003) |
The quantity of import item at Sr. No. 1, shall be amended to read as under:-
“0.531 kg per kg” |
| 44. | 18 – 19 | Chemical & Allied Product
Sr.No.A3237 (amended vide Public Notice No. 23 Dated: 10.09.2003) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3237 | Flush Cyan for springing ink (40 +/-1% Pigment and 34+/- 1% Solid Resin) | 1 kg | 1. Pigment Cyan namely Pigment Phthalo Cyanine Blue 1450 /Pigment Copper Phthalocyanine Blue/Copper Phthalocyanine Crude (PCB Free) C.I.No. 74160) Pigment Blue 15)
2. Printing Ink Vehicle –Plain (Solid content 61+/-1%) Linseed Oil Base OR Soybean Oil Base) 3. Alkyd Resin namely Soya Long oil Alkyd Resin of 70% Oil length having solid content 100% Linseed Oil based Alkyd Resin (Long Oil Length )having solid content 100% |
0.4200 kg
0.4150 kg 0.0950 kg |
-:24:-
| 4. Petroleum Distillate (Distillation Range 240-330 Degree C)
5. Oleyl Alcohol 6. Antioxidant |
0.0350 kg
0.0210 kg 0.0057 kg |
| 45. | 16 | Chemical & Allied Product
Sr.No.A3257 (amended vide Public Notice No. 31 Dated: 05.11.2003) |
After the import item at Sr. No. 1, the following additional input item (with quantity) shall be added:-
“2. Acrylic Polymer – 0.000262 kg/kg.” |
| 46. | 19 – 20 | Chemical & Allied Product
Sr.No.A3285 (amended vide Public Notice No. 38 Dated: 09.01.2004) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3285 | U.V. Curable Printing Ink – Black (Flush Route) Pigment 16.7% +/-1% | 1 kg | 1. U.V. Flush Colour – Black (30% +/- 1% Pigment and 60%+/-2% Polyester Acrylate/ Urethane Acrylate/ Acrylic Acrylate/ Epoxy Acrylate
2. Polyester Acrylate OR 2. Acrylic Acrylate OR |
0.5760 kg
0.1960 kg 0.1960 kg |
-:25:-
| 2. Urethene Acrylate
OR 2. Epoxy Acrylate (75% Resin content Resin content in the Relevant Monomer) OR Raw material for EPOXY Acrylate (75% Resin content in the Relevant Monomer) 2(A) Epoxy Resin 2(B) Acrylic Acid 2(C) Mono Ethyl Hydro Quinone 2(D) Benzyl Dimethyl Amine 2(E) Relevant Reactive Monomer namely Tripropylene Glycol Diacrylate / Tri Methyl Propane Tri Acrylate / Ethoxylated Tri Methylol Propane Tri Acrylate / Di Pentaerythritol Hexa Acrylate 3. Relevant Reactive Monomer namely, Tripropylene Glycol Diacrylate/ Tri Methylol Propane Tri Acrylate/ Ethoxylated, Tri Methylol Propane Tri Acrylate/ Di-Pentaerythritol Hexa Acrylate |
0.1960 kg
0.1960 kg 0.1058 kg 0.1058 kg 0.0416 kg 0.0010 kg 0.0020 kg 0.0496 kg 0.0730 kg |
-:26:-
| 4. Photo Initiator Combo
5. P.E. Wax 6. Fumed Silica / Additive |
0.1240 kg
0.0110 kg 0.0510 kg |
| 47. | 20 | Chemical & Allied Product
Sr.No.A3286 (Notified vide Public Notice No. 38 Dated:09/01/2004) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3286 | U.V. Curable Printing Ink – Various Colours, Flush Route (Pigment 15% +/-1%) (Other than Black, Cyan, Magenta & Yellow | 1 kg | 1. U.V. Flush Various Colour (30% +/- 1% Pigment and 60 +/- 1% Polyester Acrylate / Urethane Acrylate/ Acrylic Acrylate/ Epoxy Acrylate)
2. Polyester Acrylate OR 2. Acrylic Acrylate OR 2. Urethene Acrylate OR 2. Epoxy Acrylate (75% Resin content in the Relevant Monomer) OR 2. Raw Materials for Epoxy Acrylate (75% Resin content in the Monomer) 2 A Epoxy Resin 2 B Acrylic Acid 2 C Mono ethyl Hydro Quinone 2 D Benzyl Dimethyl Amine |
0.5150 kg
0.2470 kg 0.2470 kg 0.2470 kg 0.2470 kg 0.1334 kg 0.0524 kg 0.0012 kg 0.0025 kg |
-:27:-
| 2 E Relevant Reactive
Monomer namely Tripropylene Glycol Diacrylate / Tri Methylol Propane Tri Acrylate/ Ethoxylated Tri Methylol Propane Tri Acrylate / Di Pentaerythritol Hexa Acrylate 3. Relevant Reactive Monomer namely Tripropylene Glycol Diacrylate / Tri Methylol Propane Tri Acrylate / Ethoxylated Tri Methylol Propane Tri Acrylate / Di Pentaerythritol Hexa Acrylate 4. Photo Initiator Combo 5. P.E. Wax 6. Fumed Silica / Additive |
0.0625 kg
0.1030 kg 0.1030 kg 0.0110 kg 0.0510 kg |
| 48. | 21 | Chemical & Allied Product
Sr.No.A3287 (amended vide Public Notice No. 38 Dated: 09.01.2004) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3287 | U.V. Curable Printing Ink – Magenta/ Rubine (Flush Route) Pigment 17.4+/-1% | 1 kg | 1. U.V. Flush Colour – Magenta/ Rubine (30% +/-1% Pigment and 60%+/-2% Polyester Acrylate / Urethene Acrylate / Acrylic Acrylate/Epoxy Acrylate) | 0.5970 kg |
-:28:-
| 2. Polyester Acrylate
OR 2. Acrylic Acrylate OR 2. Urethene Acrylate OR Epoxy Acrylate (75% Resin content in the Relevant Monomer) OR Raw material for EPOXY Acrylate (75% Resin content in the Relevant Monomer) 2(A) Epoxy Resin 2(B) Acrylic Acid 2(C) Mono Ethyl Hydro Quinone 2(D) Benzyl Dimethyl Amine 2(E) Relevant Reactive Monomer namely Tripropylene Glycol Diacrylate/ Tri Methylol Propane Tri Acrylate/ Ethoxylated Tri Methylol Propane Tri Acrylate /Di Pentaerythritol Hexa Acrylate |
0.1750 kg
0.1750 kg 0.1750 kg 0.1750 kg 0.0940 kg 0.0940 kg 0.0371 kg 0.0009 kg 0.0018 kg 0.0443 kg |
-:29:-
| 7. Relevant Reactive Monomer namely Tripropylene Glycol Diacrylate/ Tri Methylol Propane Tri Acrylate/ Ethoxylated Tri Methylol Propane Tri Acrylate/ Di Pentaerythritol Hexa Acrylate
8. Photo Initiator Combo 9. P.E. Wax 10. Fumed Silica / Additive |
0.1140 kg
0.0820 kg 0.0110 kg 0.0510 kg |
| 49. | 22 | Chemical & Allied Product
Sr.No.A3288 (amended vide Public Notice No. 38 Dated: 09.01.2004) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3288 | U.V. Curable Printing Ink – Cyan, Flush Route (Pigment 14.7+/-1% | 1 kg | 1. U.V. Flush Colour – Cyan (30% +/- 1% Pigment and 60 +/- 1% Polyester Acrylate / Urethane Acrylate/ Acrylic Acrylate/ Epoxy Acrylate)
2. Polyester Acrylate OR 2. Acylic Acrylate OR 2. Urethene Acrylate OR |
0.5050 kg
0.2580 kg 0.2580 kg 0.2580 kg |
-:30:-
| 2. Epoxy Acrylate (75%
Resin content in the Relevant Monomer) OR 2. Raw Materials for Epoxy Acrylate (75% Resin content in the Relevant Monomer) 2 A Epoxy Resin 2 B Acrylic Acid 2 C Mono Ethyl Hydro Quinone 2 D Benzyl Dimethyl Amine 2 E Relevant Reactive Monomer namely Tripropylene Glycol Diacrylate / Tri Methylol Propane Tri Acrylate/ Ethoxylated Tri Methylol Propane Tri Acrylate / Di Pentaerythritol Hexa Acrylate 3. Relevant Reactive Monomer namely Tripropylene Glycol Diacrylate / Tri Methylol Propane Tri Acrylate / Ethoxylated Tri Methylol Propane Tri Acrylate / Di Pentaerythritol Hexa Acrylate 4. Photo Initiator Combo 5. P.E. Wax 6. Fumed Silica / Additive |
0.2580 kg
0.1393 kg 0.0547 kg 0.0013 kg 0.0026 kg 0.0653 kg 0.1030 kg 0.1030 kg 0.0110 kg 0.0510 kg |
-:31:-
| 50. | 429 – 430 | Electronics Product
Sr.No.B-106 |
The description of export product shall be amended to read as under:-
“Computer Motherboards OR PC Motherboards” |
| 51. | 525 | Engineering Product
Sr.No.C248 |
In the description of import item at Sl No. 1, the word “/Copper Wire Rod” (without any change in quantity) shall be added:-
“Copper in the form of Copper Cathode/ Wire Bars/ CC Rods (EC Grade)/Copper Wire Rod” |
| 52. | 526 | Engineering Product
Sr.No.C253 |
In the description of import item at Sl No. 1(a) & 1(c), the word “/Copper Wire Rod” (without any change in quantity) shall be added:-
“1(a) Copper Cathode/Wire Bar/CC Rod/Wire/Copper Wire Rod OR 1(c) Copper Alloy Wire/Cathode/Wire Bar/ C C Rod / Wire / Copper Wire Rod” |
| 53. | 526 – 527 | Engineering Product
Sr.No.C254 |
In the description of import item at Sl No. 1, the word “/Copper Wire Rod” (without any change in quantity) shall be added:-
“Copper (Cathode/Wire Bar/ Continuous Cast Rod/ Wire/ Alloy Wire)/ Copper Wire Rod ” |
| 54. | 527 | Engineering Product
Sr.No.C255 |
In the description of import item at Sl No. 1, the word “/Copper Wire Rod” (without any change in quantity) shall be added:-
“Copper (Cathode/Wire Bar/ Continuous Cast Rod/ Wire/ Alloy Wire)/ Copper Wire Rod ” |
-:32:-
| 55. | 530 | Engineering Product
Sr.No.C267 |
In the description of import item at Sl No. 1, the word “/Copper Wire Rod” (without any change in quantity) shall be added:-
“Copper in the form of Copper Cathode/Wire Bars /CC Rods (EC Grade)/ Copper Wire Rod” |
| 56. | 530 | Engineering Product
Sr.No.C268 |
In the description of import item at Sl No. 1, the word “/Copper Wire Rod” (without any change in quantity) shall be added:-
“Copper in the form of Copper Cathode/Wire Bars /CC Rods (EC Grade)/ Copper Wire Rod” |
| 57. | 530 | Engineering Product
Sr.No.C269 |
In the description of import item at Sl No. 1, the word “/Copper Wire Rod” (without any change in quantity) shall be added:-
“Copper in the form of Copper Cathode/Wire Bars /CC Rods (EC Grade)/ Copper Wire Rod” |
| 58. | 530 | Engineering Product
Sr.No.C270 |
In the description of import item at Sl No. 1(a), the word “/Copper Wire Rod” (without any change in quantity) shall be added:-
“1(a) Copper in the form of Copper Cathode/ Wire Bars/ CC Rods (EC Grade)/ Copper Wire Rod” |
| 59. | 531 | Engineering Product
Sr.No.C271 |
In the description of import item at Sl No. 1, the word “/Copper Wire Rod” (without any change in quantity) shall be added:-
“Copper in the form of Copper Cathode/ CC Rods/Wire Bars (EC Grade)/ Copper Wire Rod” |
-:33:-
| 60. | 531 | Engineering Product
Sr.No.C272 |
In the description of import item at Sl No. 1, the word “/Copper Wire Rod” (without any change in quantity) shall be added:-
“Copper in the form of Copper Cathode/ CC Rods/Wire Bars (EC Grade)/ Copper Wire Rod” |
| 61. | 540 | Engineering Product
Sr.No.C297 |
The quantity of export product shall be amended to read as under:-
“ 1 kg” |
| 62. | 4 – 5 | Engineering Product
Sr.No.C371 (notified vide Public Notice No. 06 Dated:08/05/2003) |
The description of export product shall be amended to read as under:-
“Galvanised Steel Stranded Wire (Wire Strand)” |
| 63. | 564 | Engineering Product
Sr.No.C396 |
The norm covered by this entry shall be deleted. |
| 64. | 614 – 616 | Engineering Product
Sr.No.C525 |
1. The description of import item at Sr. No. 2(b), (with quantity) shall be substituted to read as under:-
“2(b) Ferro Nickel – 240 kg OR Nickel Oxide Sinter – 105 kg OR Unwrought Nickel – 90 kg” 2. After foot note at Sr. No. 4, the following foot note below this entry shall be added:- “Note:5. Ferro Nickel/Nickel Oxide Sinter/ Unwrought Nickel under this SION shall be allowed for austenitic stainless steel covered under |
-:34:-
| AISI 200 Series and AISI 300 series. Further, against export of low nickel austenitic stainless steel products (AISI 200 Series), quantities of the 3 alternate forms of nickel shall be limited to 33% of the quantity individually mentioned above.” |
| 65. | 657 – 658 | Engineering Product
Sr.No.C832 |
The description of export products shall be amended to read as under:-
“Table, Kitchen & Other household articles made of Stainless Steel with or without handle / lid/ antiskid gasket irrespective of what material the handle / lid / antiskid gasket may have been made of” (other than those covered under the SION C-833) |
| 66. | 658 | Engineering Product
Sr.No.C833 |
The description of export products shall be amended to read as under:-
“Table, Kitchen & Other household articles made of Stainless Steel with or without handle / lid/ antiskid gasket irrespective of what material the handle / lid / antiskid gasket may have been made of (rectangular / square with straight edges)” |
| 67. | 659 | Engineering Product
Sr.No.C841 |
The norm covered by this entry shall be deleted. |
-:35:-
| 68. | 18 – 19 | Engineering Product
Sr.No.C890 (amended vide Public Notice No. 44 Dated:18/10/2002) |
1. The quantity of export product shall be amended to read as under:-
“1000 Nos.” 2. The description of import item at Sr. No. 1 (with quantity) shall be amended to read as under:- “1. Nickel Silver – 1.08 kg./kg. Brass Strip content in the Export product” |
| 69. | 744 | Engineering Product
Sr.No.C1195 |
The description of import item at Sr. No. 1, (with quantity) shall be amended to read as under:-
“1. Lead Scrap namely – 1.06 kg./kg. ISRI Radio, Racks, – content in Relay, Ropes & Roses export Product” |
| 70. | 745 | Engineering Product
Sr.No.C1205 |
The norm covered by this entry shall be deleted. |
| 71. | 746 – 747 | Engineering Product
Sr.No.C1223 |
The description of export product shall be amended to read as under:-
“Magnetic Assemblies Incorporating cast Alloy permanent magnets e.g.” |
| 72. | 839 | Engineering Product
Sr.No.C1635 |
In the description of import item at Sl No. 1, the word “/Copper Wire Rod” (without any change in quantity) shall be added:-
“Copper Cathode/CC Rod/Wire Bars Ingots/ Copper Wire Rod” |
-:36:-
| 73. | 23 | Engineering Product
Sr.No.C1850 (amended vide Public Notice No. 54 Dated: 03.01.2003) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C-1850 | Synthetic Media Pocket | 1 No. | 1. Synthetic Non Woven Filter Media of relevant efficiency and GSM | 1.04Sq.Mtr/ Sq.Mtr. content in the export product |
| 74. | 46 | Engineering Product
Sr.No.C1884 (amended vide Public Notice No. 03 Dated: 31/03/2004) |
1. The description of export item shall be amended to read as under:-
“Seamless Non-Alloy Steel Casing Tubes” 2. The description of import items at Sr. No. 1 to 3, (with quantity) shall be amended to read as under:- “1. Non-Alloy Steel – 1.25 kg Bilets / Rounds 2. Thread Protectors – Net to net 3. Thread Inserts / Cut – Upto 2% off blades of FOB value” |
| 75. | 926 – 928 | Leather Product
Sr.No.G-7 |
1. The description of import item at Sr. No. 12, (with quantity) shall be amended to read as under:-
“12(a) For all Chrome Tanned Leather (i) Chrome Tanning Agent – 50 kg (ii) Vegetable Tanning Agent – 20 kg such as Wattle or Mimosa/ Quebracho and supplementary Vegetable tanning agents such As Gambier/ Chestnut/Tara/ Sumac |
-:37:-
| 12(b) For Vegetable Tanned Leather – 150 kg
Main vegetable tanning Agents such as Wattle or Mimosa/ Quebracho and Supplementary vegetable Tanning agents such as Gambier/Chestnut/Tara/ Sumac subject to the condition That Supplementary Tanning Agents such as Gambier, Chestnut, Tara and Sumac Shall be allowed a maximum Of 30 kg 12(c) For combination of tanned leather / semi – chrome tanned leather (i) Vegetable Tanning Agent – 150 kg such as Wattle or Mimosa/ Quebracho and Supplementary Vegetable tanning agents such as Gambier/ Chestnut/Tara/ Sumac subject to the condition that Supplementary Tanning Agents such as Gambier, Chestnut, Tara and Sumac shall be allowed a Maximum of 30 kg (ii) Chrome Tanning Agent – 22 kg 2. The import item at Sr. No. 13 stands deleted. 3. After the foot note at Sr. No. 1, the following foot note shall be added:- Note:2. Item No. (ii) for 12(a) shall not be allowed for the grain garment leather and gloving leather. Note:3. Supplementary Vegetable Tanning Agents Gambier/ Chestnut/Tara/Sumac shall be allowed for import on Actual User condition. In case of DFRC, these items shall be used by the licensee only and shall not be allowed for transfer/sale.” |
-:38:-
| 76. | 956 – 958 | Leather Product
Sr.No.G-46 |
1. The description of import item at Sr. No. 12, (with quantity) shall be amended to read as under:-
“12(a) For all Chrome Tanned Leather (i) Chrome Tanning Agent – 30 kg (ii) Vegetable Tanning Agent – 12 kg such as Wattle or Mimosa/ Quebracho and supplementary Vegetable tanning agents such As Gambier/ Chestnut/Tara/ Sumac |
| 12(b) For Vegetable Tanned Leather – 55 kg
Main vegetable tanning agents such as Wattle or Mimosa/ Quebracho and Supplementary vegetable Tanning agents such as Gambier/Chestnut/Tara/ Sumac subject to the condition That Supplementary Tanning agents such as Gambier, Chestnut, Tara and Sumac Shall be allowed a maximum Of 11 kg 12(c) For combination of tanned leather / semi – chrome tanned leather (i) Vegetable Tanning Agent – 55 kg such as Wattle or Mimosa/ Quebracho and Supplementary Vegetable tanning agents such as Gambier/ Chestnut/Tara/ Sumac subject to the condition that Supplementary Tanning Agents such as Gambier, Chestnut, Tara and Sumac shall be allowed a Maximum of 11 kg (ii) Chrome Tanning Agent – 13 kg |
-:39:-
| 2. The import item at Sr. No. 13 stands deleted.
3. The following Foot notes below this entry shall be added:- Note:1. Item No. (ii) for 12(a) shall not be allowed for the grain garment leather and gloving leather. Note:2. Supplementary Vegetable Tanning Agents Gambier/ Chestnut/Tara/Sumac shall be allowed for import on Actual User condition. In case of DFRC, these items shall be used by the licensee only and shall not be allowed for transfer/sale.” |
| 77. | 968 | Plastics Product
Sr.No.H-47, H-48, & H-49 |
Entries at Sr. Nos. H-47, H-48 & H-49 shall be deleted. |
| 78. | 992 | Plastics Product
Sr.No.H-177 |
The norm covered by this entry shall be deleted. |
| 79. | 1000 | Plastics Product
Sr.No.H-241 (amended vide Public Notice No. 46 Dated:06.11.2002) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| H-241 | PP Woven Sacks with/without liner | 1 kg | 1. PP Granules
2. Plastic Material used for liner |
1.10 kgs/kg content in export
1.05 kgs/ kg content in export |
-:40:-
| 80. | 1036 | Plastics Product
Sr.No.H-419 |
The norm covered by this entry shall be re-stored by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| H-419 | Drip Bateral of 13 mm ID, Wall thickness 1.25 mm having inline hole of 3.2 mm at 75 mm equal distance made out of LLDPE & LDPE in 500 mts. Roll | 1 kg | 1. LLDPE Granules
2. LDPE Granules 3. Relevant Master Batch |
0.6615 kg
0.3297 kg 0.0588 kg |
| 81. | 1041 | Plastics Product
Sr.No.H-444 (amended vide Public Notice No. 38 Dated:09.01.2004) |
The description of import item at Sr. No. 1, (without any change in quantity) shall be amended to read as under:-
“Relevant Duplex Paper Board/ Bleached Paper/ Bleached Paper Board/Kraft Paper” |
| 82. | 1042 | Plastics Product
Sr.No.H-449 |
The norm covered by this entry shall be deleted. |
| 83. | 15 | Miscellaneous Product
Sr.No.K-46 (amended vide Public Notice No. 23 Dated:10.09.2003) |
The description of import item at Sr. No. 1, (without any change in quantity) shall be amended to read as under:-
“1. Glass Rods OR Unfinished Glass Beads /Chatons” |
-:41:-
Annexure “B” to the
Public Notice No. 70
Dated: 29/06/2004
CHEMICALS AND ALLIED PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed | ||
| A3333 | 4-(((4-Fluorophenyl) Imino) Methyl) Phenol (Schiffs Base) | 1 kg | 1. P-Hydroxy Benzaldehyde
2. P-Fluoro Aniline 3. Isopropyl Alcohol |
0.63 Kg./Kg.
0.58 Kg/kg. 1.00 Kg/Kg. |
||
| A3334 | Silver Nitrate (Assay = 99.99% min.) Silver content = 63.5% min. | 1 kg | 1. Silver | 0.6351 kg. | ||
| A3335 | Boron Trifluoride | 1 kg | 1. Fluorspar (acid grade)
2. Boric Acid |
2.6 kg.
1.048 kg. |
||
| A3336 | Para Fluoro Aniline/ Ortho FluoroAniline | 1 kg | 1. Fluoro Benzene | 1.145 kg. | ||
| A3337 | Mixed Butylated Phenol (containing 75% min. 2,6 Ditertiary Butyl Phenol and 25% Max. Mono Tertiary Butyl Phenol & Tertiary Butyl Phenol) | 1 kg | 1. Phenol
2. Isobutylene |
0.632 kg.
0.760 kg. |
||
-:42:-
| A3338 | Ceramic Fibre Blanket (1260 C Grade) | 1 MT | 1. Alumina
2. Quartz 3. Inter-Locking Needles (Felting Needles) 4. Electric Furnace Nozzle made of Molybdenum 5. Electric Furnace Nozzle Support made of Molybdenum 6. Furnace Resin Block made of Molybdenum 7. Electric Furnace Electrode End made of Molybdenum 8. Electric Furnace Electrode Head |
0.480 MT
0.604 MT 249 Nos. 1 No/ 1150 Tonnes of export 1 No/ 1150 Tonnes of export 1 No/ 3600 Tonnes of export 1.89 Nos./ 525 Tonnes of export 1.89 Nos./ 525 Tonnes of export |
| A3339 | Ink Flow Improver containing minimum 95% Texanol Isobutyrate | 1 kg | 1. Petroleum Distillate (Distillation Range 240-330 Degree Celsius)
2. Texanol Isobutyrate |
0.051 kg
0.969 kg |
-:43:-
| A3340 | Printing Ink Vehicle Special Gel – Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) | 100 kg | 1. Petroleum Distillate (Distillation Range 240-330 Degree C)
2. Bis-Phenol-A 3. Butylated Hydroxy Toluene 4. Di-Cyclopentadiene 5. Sylvblend FA 7002/DIMER Acid 6. Fumaric Acid 7. Glycerine 8. Isophthalic Acid 9. Light Magnesium Oxide 10. Neodene 11. Nony Phenol 12. Oxyaluminium Octoate 13. Tertiary Butyl Catechol 14. Para Tertiary Butyl Phenol (PTBP) 15. Paraformaldehyde 16. Pentaery thritol 17. Refined Linseed Oil 18. Rosin 19. Texanol Isobutyrate 20. Tri Phenyl Phosphite 21. Trimethylol Propane |
34.800 kgs
0.200 kgs 0.050 kgs 20.480 kgs 0.450 kgs 3.350 kgs 0.006 kgs 2.000 kgs 0.011 kgs 2.600 kgs 13.200 kgs 0.500 kgs 0.010 kgs 0.450 kgs 2.200 kgs 3.050 kgs 8.800 kgs 13.800 kgs 8.100 kgs 0.012 kgs 0.700 kgs |
-:44:-
| A3341 | Benfuresate Technical (98%) | 1 kg | 1. NC 9770(Approx. 80% Solution in Toluene)
2. Sodium Borohydride Granules / Powder 3. Filter Aid (Celatom FW 50) 4. Triethyl Amine 5. Xylene / Mixed Xylene |
1.526 kg
0.046 kg 0.013 kg 0.063 kg 0.120 kg |
| A3342 | Sodium Salt of Mercapto Benzothiazole 50% W/W Aqueous Solution | 1 kg | 1. Aniline
2. Carbon Disulphide 3. Molten Sulphur 4. Caustic Soda 5. Ortho Xylene |
0.272 kg
0.208 kg 0.090 kg 0.107 kg 0.002 kg |
| A3343 | Paramenthane Hydroperoxide (Paramenthane Hydroperoxide content 54-56% Paramenthane content 44-46%) | 1 kg | 1. Para Menthane | 0.920 kg |
| A3344 | Tripolidine HCL | 1 kg | 1. 4-Methyl Acetophenone
2. Purrolidine 3. Lithium 4. ISO Propyl Alcohol 5. 2-Bromopyridine |
2.20 kg
1.03 kg 0.10 kg 1.50 kg 2.75 kg |
| A3345 | Sodium 2 Ethyl Hexanoate | 1 kg | 1. 2 Ethyl Hexanoic Acid | 0.92 kg |
-:45:-
| A3346 | White / Yellow Petroleum Jelly | 1 kg | 1. Base Oil
2. Paraffin Wax 3. Micro-crystalline Wax |
0.75 kg
0.17 kg 0.09 kg |
| A3347 | Bis (2,2,6,6 Tetramethyl-4 Piperidinyl) Sebacate | 1 kg | 1. 2,2,6,6, Tetramethyl-4-Piperdinol
2. Dimethyl Sebacate 3. Acetonitrite |
0.839 Kg
0.614 Kg 0.400 kg |
| A3348 | Oil resistant metal fitted/metal bonded/metal un-bounded rubber parts
(moulded/Extruded) including Engine Mounting & automotive part |
1 kg | 1. Mild Steels/ coils/ plates/ rods/ rounds/ strips
2. Relevant Rubber compound consisting of the following: 2(a) Relevant Natural rubber/ relevant synthetic rubber namely, NBR depending upon the description of the product to be exported 2(b) Carbon black 2(c) Zinc Oxide |
1.30 Kg./Kg. content in the export product.
0.63 Kg/Kg. content of rubber compound in the export product. 0.126 Kg/Kg. content of rubber compound in the export product. 0.0315 Kg/ Kg. content of rubber compound in the export product |
-:46:-
| 2(d) Rubber chemical
viz antioxidants/ accelerators/ retarder and pepitizer 2(e) Misc chemicals viz. stearic acid, insoluble sulphur, silicon oil 3. Bonding agent for metal bonded parts |
0.012 Kg/Kg. content of rubber compound in the export product.
0.042 Kg/Kg. content of rubber compound in the export product. 0.01 Kg./Kg. of steel in the export product |
||||||||
| A3349 | Other specialty metal fitted/ metal bounded/ metal un- bonded rubber parts (moulded/ extruded) including engine mounting & automotive parts (Heat & weather resistant) | 1 kg | 1 Mild Steels/ coils/ plates/ rods/ rounds/ strips
2 Relevant Rubber compound consisting of the following: 2(a) Relevant Natural rubber/ relevant synthetic rubber namely, Polychlroprene/ EPDM depending upon the description of the product to be exported 2(b) Carbon black |
1.30 Kg./Kg. content in the export product.
0.63 Kg/Kg. content of rubber compound in the export product. 0.126 Kg/Kg. content of rubber compound in the export product. |
|||||
-:47:-
| 2(c) Zinc Oxide
2(d) Rubber chemical viz antioxidants/ accelerators/ retarder and pepitizer 2(e) Misc chemicals viz. stearic acid, insoluble sulphur, silicon oil 3. Bonding agent for metal bonded parts |
0.0315 Kg/Kg. content of rubber compound in the export product
0.012 Kg/Kg. content of rubber compound in the export product. 0.042 Kg/Kg. content of rubber compound in the export product. 0.01 Kg./Kg. of steel in the export product |
|||
| A3350 | Oil resistant moulded goods of synthetic rubber only (NBR) | 1 kg | 1. Synthetic Rubber namely (NBR)
2. Carbon Black/ Precipitated Silica 3. Zinc Oxide 4. Rubber Chmicals (Accelerator,Antioxidant, Rearders,Pepitiser 5. Miscellaneous Chemicals (Microcrystyalline Wax, Paraffin Wax,Plasticiser, Softners, Pigments, Stearic Acid,Sulphur, Coupling Agents, Activators,Tackifiers) |
0.600 Kg.
0.240 Kg. 0.027 Kg. 0.024 Kg. 0.050 Kg. |
-:48:-
| A3351 | Other specialty moulded goods of synthetic rubber only (Neoprene/EPDM) | 1 kg | 1. Synthetic Rubber only Polychloroprene/ EPDM
2. Carbon Black/ Precipitated Silica 3. Zinc Oxide 4. Rubber Chmicals (Accelerator, Antioxidant, Retarders, Pepitiser. 5. Miscellaneous Chemicals (Microcrystyalline Wax, Paraffin Wax,Plasticiser, Softners, Pigments, Stearic Acid, Sulphur, Coupling Agents, Activators, Tackifiers) |
0.600 Kg.
0.240 Kg. 0.027 kg 0.024 Kg. 0.050 Kg |
||||
| A3352 | Oil resistant relevant natural rubber/ synthetic rubber based rubber compounded sheets/ rings /gaskets | 1 kg | 1. Natural rubber/ Synthetic Rubber namely HBR
2. Zinc Oxide 3. Carbon Black 4. Antioxident/ Accelerator/ Retarder/ Peptisizer. 5. Miscellaneous chemicals (Microcrystalline wax paraffin wax, pigment and softners, sulphur, |
0.680 Kg.
0.0212 Kg 0.170 Kg. 0.010 Kg. 0.042 Kg. |
||||
-:49:-
| stearic acid solvent, plasticizers, synthetic resins, bounding/coupling agents, activators & fillers, dip chemicals (excluding resorcinol) mould release agents tackifiers and catalysts and syloff. | ||||
| A3353 | Other specialty relevant natural rubber/ synthetic rubber based rubber compounded sheets/ rings /gaskets | 1 kg | 1. Natural Rubber/ Relevant Synthetic Rubber namely, Neoprene / EPDM
2. Zinc Oxide 3. Carbon Black 4. Antioxident/ Accelerator/ Retarder / Peptisizer 5. Miscellaneous chemicals (Microcrystalline wax paraffin wax, pigment and softners, sulphur, stearic acid solvent, plasticizers, synthetic resins, bounding / coupling agents, activators & fillers, dip chemicals (excluding resorcinol) mould release agents tackifiers and catalysts and syloff |
0.680 Kg.
0.0212 Kg 0.170 Kg. 0.010 Kg. 0.042Kg. |
-:50:-
| A3354 | Oil Resistant Rubber Gaskets (Rings) | 1 kg | 1. Natural Rubber
2. Synthetic Rubber namely, NBR 3. Carbon Black 4. Zinc Oxide 5. Rubber Chemicals (Accelerator /Antioxidant/ Pepitizers/ Retarders) 6. Miscellaneous Chemicals (Microcrystalline Wax) |
0.382Kg.
0.130Kg. 0.358Kg. 0.026Kg. 0.020Kg. 0.075Kg. |
| A3355 | Other Specialty Rubber Gaskets (Rings) | 1 kg | 1. Natural Rubber
2. Synthetic rubber namely, Neoprene/ EPDM 3. Carbon Black 4. Zinc Oxide 5. Rubber chemicals (Accelerator/Antioxidant/Peptizers/ Retarders) 6. Miscellaneous Chemicals (Microcrystalline Wax) |
0.382Kg.
0.130Kg. 0.358Kg. 0.026Kg. 0.020Kg. 0.075Kg. |
| A3356 | 2-(2,4 Difluorophenyl) Propane/(1,3 Difluoro Benzene Cumene) | 1 kg | 1. 1,3 Difluoro Benzene | 1.50 kg. |
| A3357 | Trimipramine Maleate E.P. | 1 kg | 1. 1-Bromo-3-Chloro 2 Methyl Propane
2. Iminodibenzyl |
0.52 kg.
0.53 kg. |
-:51:-
| A3358 | Clonazepam BP/ USP | 1 kg | 1. 2-Amino-5-Nitro-2-Chlorobenzophenone | 1.33 kg. |
| A3359 | Closantel | 1 kg | 1. Para Chloro Ortho Nitro Toluene
2. Iodine |
1.00 kg.
1.13 kg. |
| A3360 | Printing Ink Vehicle – Plain (Solid content 61+/-1%) Linseed Oil Base or Soya Bean Oil base) | 1 kg | 1. Relevant Alkyd Resin namely Soya Long Oil Alkyd resin of 70% Oil length having Solid content 100% / Linseed Oil Based Alkyd resin (Long Oil Length)
2. Soya Bean Oil 3. Petroleum Distillate (Distillation Range 240 – 330 Degree Centigrade) 4. Phenol Modified Rosin Ester / Rosin Modified Phenolic Resin (Technical Specification in Acid Values 25 max. softening Point (R&B) 110 Degree – 120 Degree Centigrade) 5. Structed Phenolic Modified Rosin Ester 6. Aluminium Chelate |
0.105 kg
0.051 kg 0.402 kg 0.367 kg 0.108 kg 0.010 kg |
-:52:-
| A3361 | Soya Clay Compound (Containing 26 +/-1% Soya Bean Oil and 56 +/-1% China Clay) | 1 kg | 1. China Clay Powder
2. Soya Bean Oil 3. Spindle Oil 4. Refined Linseed Oil |
0.570 kg
0.262 kg 0.156 kg 0.032 kg |
| A3362 | Water Fighting compound containing Minimum 53% +/- 1% Petroleum and 20%+/- 1% Polyethylene Wax (Ink Additive) | 1 kg | 1. Petrolatum
2. Polyethylene Wax 3. Petroleum Distillate (Distillation Range 240 – 330 Degree Centigrade) 4. Wax Emulsifier |
0.541 kg
0.204 kg 0.051 kg 0.224 kg |
| A3363 | Pre Reforming Catalyst Type: C11-PR Containing Nickel Oxide = 55-58% Magnesium Oxide 13+/-2%) | 1 kg | 1. Nickel Metal unwrought
2. Magnesium Oxide 3. Special Grade Alumina Powder (Moisture content 25%) |
0.433 kg.
0.132 kg 0.102 kg. |
| A3364 | Phenazopyridine Hydrochloride USP | 1 kg | 1. Pyridine
2. Aniline 3. Dimethyl Aniline 4. Acetone |
0.96 kg.
0.62 kg. 0.50 kg. 1.00 kg. |
| A3365 | Hydrotreating Catalyst (containing Cobalt Oxide = 3-4% Molybdenum Trioxide 10+1/2% Alumina = 87+1% | 1 kg | 1. Special Grade Alumina Powder (moisture content 25%)
2. Molybdenum Trioxide 3. Cobalt Metal |
1.109 kg.
0.101 kg. 0.017 kg. |
-:53:-
| A3366 | 5-Methyl Nicotinic Acid | 1 kg | 1. 3,5-Lutidine
2. Potassium Permanganate 3. Isopropyl alcohol |
2.90 kg.
8.50 kg. 3.00 kg. |
| A3367 | Salsalate B.P./U.S.P | 1 kg | 1. Salicylic Acid
2. IPA |
1.24 kg.
1.00 kg. |
| A3368 | Citronellyl Acetate | 1 kg | 1. Citronellol
2. Acetic Acid |
0.891 kg.
0.257 kg. |
| A3369 | Copper Carbonate (Wet cake) (Copper content 46%) | 1 kg | 1. Copper Scrap | 0.478 kg. |
| Note : In case of variation of copper content in export product, pro-rata calculation for input quantities should be needed. | ||||
| A3370 | Toner for Photocopier (Pure Tone-6000) | 1 kg | 1. Resin (Styrene Acrylate Resin)
2. Wax 3. Fumed Silica 4. Magnetite 5. Additive (Charge control Agent/ Titanium Dioxide) |
0.670 kg
0.025 kg. 0.020 kg 0.350 kg. 0.040 kg. |
| A3371 | 5-Sulfo Salicylic Acid | 1 kg | 1. Salicylic Acid | 0.680 kg. |
| A3372 | Sodium Cyanate | 1 kg | 1. Soda Ash | 0.860 kg. |
| A3373 | 8-Chloro Theophylline | 1 kg | 1. 1,3-Dimethyl FAU
2. Ethylene Dichloride 3. Dimethyl Formamide |
1.68 kg.
0.50 kg. 0.50 kg. |
| A3374 | Furane Resin containing 2% Silane (Arfurane C Solution) | 1 kg | 1. Furfuryl Alcohol
2. Silane |
0.97 kg
0.02 kg |
-:54:-
| A3375 | Beta Blue Pigment wet cake (Phthalocyanine Beta Blue Pigment
Wet cake (on 100% basis) |
1 kg | 1. Pigment Copper Phthalocyanine Blue/ Copper Phthalocyanine blue crude (PCB free) (C.I.No. 74160) (Pigment Blue 15)
OR 1(i) Urea (ii) Phthalic Anhydride (iii) Cuprous Chloride OR Copper Scrap (iv) Alkyl Benzene (v) Ammonium Molybdate 2. Diethylene Glycol |
1.00 kg
1.494 kg 1.100 kg 0.214 kg 0.122 kg 0.195 kg 0.010 kg 0.828 kg |
| A3376 | Tertiary Butyl Peroxy Isopropyl Carbonate Benzoate In odourless Mineral sprit (assay 74 – 76%) | 1 kg | 1. Tertiary Butyl Hydro peroxide
2. Isopropyl Chlororformate 3. Odourless Mineral Sprit |
0.406 kg
0.553 kg 0.250 kg |
| A3377 | Nylon Twine made out of Nylon Filament | 1 kg | 1. Nylon Twine made out of imported Nylon filament yarn 210 D nylon 6 | 1.04 kg. |
| A3378 | Alpha Picoline | 1 kg | 1. Pyridine Base – L containing average 35% alpha Picoline | 3.33 kg. |
-:55:-
Annexure “C” to the
Public Notice No. 70
Dated: 29/06/2004
ENGINEERING PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C1968 | Forged Steel Balls of Size upto 12mm dia made of Non-alloy steel
OR Alloy Steel OR Stainless Steel. |
1 kg | 1. Wire/Wire Rod of relevant grade of Steel
2. Flashing/Lapping Plates, Grinding wheels, Diamond dresser, Polishing compound. |
1.45 Kg.
Within 1% of FOB value of exports. |
| C1969 | Forged Steel Balls of Size more than 12mm dia up to 40 mm dia made of Non-alloy steel
OR Alloy Steel OR Stainless Steel |
1 kg | 1. Wire/Wire Rod of
relevant grade of Steel 2. Flashing/ Lapping Plates, Grinding wheels, Diamond dresser, Polishing compound |
1.35 Kg.
Within 1% of FOB value of exports. |
| C1970 | Geophysical Equipment-HGS 2BP Connector | 1 No. | 1. Thermoplastic
Polyurethane 20% GF (Elastollan-R 3000) |
1.05 kg / kg content in the export product |
| C1971 | Silver Targets/Discs 99.9% purity. | 1 kg | 1. Silver Ingots 99.9%
purity. OR 1. Scrap Silver/Used Silver Targets/ Discs. |
1.01 kg/kg content in the export product
1.02 kg/kg content in the export product |
-:56:-
| C1972 | Computer Machinery Parts made of E.G. Steel Sheets | 1 No. | 1. E.G. Steel Sheets | 1.20 kg/kg content in export product |
| C1973 | Resessed ball bearing cages | 1 kg | 1. Steel Strips | 1.83 Kg./Kg. content in export product |
| C1974 | Resessed taper roller bearing cages | 1 kg | 1. Steel Strips | 3.20 Kg./Kg. content in export product |
| C1975 | All Types of Control and Speedometer Cables, Outer & Inner Cables (Automotive Application) | 1 kg | 1. Steel Wire
2. Steel Stranded Wire 3. Flexible Transmission Shaft 4. Components 5. Plastic Granules 6. Plastic Tubing 7. Zinc |
1.05 kg/kg content in the export product
1.02 kg/kg content in the export product 1.02 kg/kg content in the export product Net to net 1.05 kg/kg content in the export product 1.02 kg/kg content in the export product 1.10 kg/kg content in the export product |
-:57:-
Annexure “D” to the
Public Notice No. 70
Dated: 29/06/2004
FOOD PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| E115 | Oleoresin laurel | 1 kg | 1. Laurel leaves | 26 kg. |
| E116 | Refined Rice Bran Oil (with 0.1% FFA) | 1 MT | 1. Edible Rice Bran oil (with 0.25% FFA) | 1.030 MT |
| E117 | Oleoresin Rosemary | 1 kg | 1. Rosemary ( dried ) | 25 Kg |
-:58:-
Annexure “E” to the
Public Notice No. 70
Dated: 29/06/2004
TEXTILE PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| J360 | Men’s Fashion Oversize Half Sleeve Shirt with a minimum length of 31 inches | 1 Pc. | 1. Relevant fabric | 2.6 Sq.mts. |
| J361 | Shawls/Blankets/ Mufflers made of Pashmina Wool or Pashmina Sliver/Top/Roving | 1 kg | 1. Pashmina Woollen Yarn of relevant micron and staple length but below 20 Micron and staple length below 40 mm
OR Pashmina Sliver/ Top/Roving of relevant micron and staple length but below 20 micron and staple length below 40 mm. |
1.10 kg
1.20 kg |
| Note: Micron & Staple length should match in the Import & Export. | ||||
