(TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY
PART-1-SECTION-1)
GOVERNMENT OF INDIA
MINISTRY OF COMMERCE & INDUSTRY
DEPARTMENT OF COMMERCE
PUBLIC NOTICE NO. 20 (RE- 03)/ 2002-2007
NEW DELHI : DATED : 01/08/2003.
Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.
2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of Foreign Trade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.
3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure “A” to this Public Notice shall be made.
4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-
CHEMICALS AND ALLIED PRODUCTS
After the existing entry at Sr.No.A-3211, new entries at Sr. No. A-3212 to A-3230 shall be added as per Annexure ”B” to this Public Notice.
-:2:-
ENGINEERING PRODUCTS
After the existing entry at Sr.No.C-1900, new entries at Sr.No.C-1901 to C-1906 shall be added as per Annexure ”C” to this Public Notice.
5. This issues in public interest.
(L. MANSINGH)
DIRECTOR GENERAL OF FOREIGN TRADE
(S.B.S. REDDY)
DIRECTOR GENERAL OF FOREIGN TRADE
-:3:-
Annexure “A” to the
Public Notice No. 20
Dated: 01/08/2003
AMENDMENTS/CORRECTIONS
| Sr.
No. |
Page
No. |
Reference | Amendments/Corrections |
| 1 | 2 | 3 | 4 |
| 1. | 11 | Chemicals & Allied Products
Sr.No.A28 |
The norm covered by this entry shall be substituted by the following:- |
| Sr. No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A28 | 4,4-Oxybis (benzene Solfonyl Hydrazide) | 1 kg | 1. Hydrazine Hydrate 80%
2. Diphenyl Oxide 3. Dicumyl Peroxide |
0.540 kg
0.650 kg 0.060 kg |
| 2. | 138-139 | Chemicals & Allied Products
Sr.No.A1002 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1002 | Vinyl Sulphone Ester (Acetanilide based) | 1 kg | 1.(a) Aniline Oil
(b) Acetic Acid (Glacial) / Acetic Anhydride (c) Chlorosulphonic Acid OR Sulphur OR 1(a) Acetanilide (b) Chlorosulphonic Acid |
0.600 kg
0.480 kg 3.142 kg 0.958 kg 0.800 kg 3.142 kg |
-:4:-
| OR
Sulphur OR 1. N-Acetyl Sulphanilyl Chloride 2. Sodium Bi-Sulphite OR Sulphur 3. Caustic Soda Flakes / Lye 4. Ethylene Oxide 5. Soda Ash |
0.958 kg
1.000 kg 0.491 kg 0.156 kg 1.000 kg 0.290 kg 0.205 kg |
| 3. | 161 | Chemicals & Allied Products
Sr.No.A1275 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed | |
| A1275 | High base Calcium Phenate Chemical Additive for Lubricating Oil containing Calcium Dodecyl Phenate 36.5% Min. & Polybutene Succinic Anhydride 4.5% Min. | 1 kg | 1. Dodecyl Phenol
2. C20-C24 Linear Alkyl Benzene Sulfonic Acid (Sulfonic Acid) 3. Polybutene 4. Maleic Anhydride 5. Hydrated Lime 6. Isodecanol 7. 150 Solvent Neutral 8. Diatomaceous Earth (Filter Aid) |
0.335 kg
0.024 kg 0.042 kg 0.005 kg 0.176 kg 0.010 kg 0.350 kg 0.022 kg |
|
| 4. | 163 | Chemicals & Allied Products
Sr.No.A1305 |
After import item at Sr. No. 1, the following additional import item (with quantity) shall be added:-
“2. LSHS/Furnace Oil – 0.250 MT/MT 3. Naphtha – 0.039 MT/MT ” |
| Note: CIF Value of input items 2 & 3 together is restricted to 6.6% of FOB value. | |||
-:5:-
| 5. | 165 | Chemicals & Allied Products
Sr.No.A1331 |
After import item at Sr. No. 3, the following additional import item (with quantity) shall be added:-
“4. LSHS/Furnace Oil – 0.206 MT/MT 5. Naphtha – 0.043 MT/MT ” |
| Note: CIF Value of input items 4 & 5 together is restricted to 5.2% of FOB value. | |||
| 6. | 168 | Chemicals & Allied Products
Sr.No.A1371 |
After import item at Sr. No. 1, the following additional import item (with quantity) shall be added:-
“2. LSHS/Furnace Oil – 0.192 MT/MT 3. Naphtha – 0.06 MT/MT” |
| Note: CIF Value of input items 2 & 3 together is restricted to 5.7% of FOB value. | |||
| 7. | 173 | Chemicals & Allied Products
Sr.No.A1435 |
After import item at Sr. No. 3, the following additional import item (with quantity) shall be added:-
“4. LSHS/Furnace Oil – 0.217 MT/MT 5. Naphtha – 0.040 MT/MT ” |
| Note: CIF Value of input items 4 & 5 together is restricted to 6.2% of FOB. | |||
| 8. | 244 | Chemicals & Allied Products
Sr.No.A1902 |
The description of export item shall be amended to read as under:-
“Profenofos Technical (Minimum 87%) OR {O-(4-Bromo-2-Chlorophenyl)-O-Ethyl-S-Propyl Phosphorothioate} (Minimum 87%) ” |
| 9. | 254 | Chemicals & Allied Products
Sr.No.A1985 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1985 | Vinyl Pridine Latex with 40% Solid content | 1 kg | 1. 2-Vinyl Pyridine Monomer
2. 1,3-Butadiene 3. Styrene Monomer 4. Tertiary Dodecyl Mercaption |
0.059 kg
0.277 kg 0.063 kg 0.0026 kg |
-:6:-
| 5. Emulsifiers e.g. Dresinate 214, Bandis T 80 KP, Bandis G 80 K Residesk D 100 Exp Pottasium Soap of Dis-proportionated
6. Sodium Salt of condensed Naphthalene Sulphonic Acid e.g. OROTAN SN/TAMOL SN 7. Unsaturated Fatty Acids having C14-18 and C 16-18 8. 1,4, – Benzene Diol |
0.026 kg
0.00228 kg 0.0038 kg 0.000397 kg |
| 10. | 258 | Chemicals & Allied Products
Sr.No.A2026 |
1. The alternative import item at SR. No. 1, the following alternative import item (with quantity) shall be added:-
“OR Cane Sugar – 1.1 kg” 2. After the import item at SR. No. 4, the following additional import item (with quantity) shall be added:- “5. Furnace Oil – 1.2 Ltrs.” |
-:7:-
| 11. | 5 | Chemicals & Allied Products
Sr.No.A2529 (Notified vide Public Notice No. 10 Dated: 30/05/2003) |
The description of import item at Sr. No. 2 & 4, the following import items (without any change in quantities) shall be amended to read as under:-
“2. Alkyd Resin namely Soya Long Oil length Alkyd Resin of 70% Oil length having Solid content 100%)” “4. Petroleum Hydro Carbon Solvent (Distillation Range of 240-330 degree centigrade)” |
| 12. | 326 | Chemicals & Allied Products
Sr.No.A2537 |
The description of export item shall be amended to read as under:-
“Naphthol AS-ITR” |
| 13. | 337 | Chemicals & Allied Products
Sr.No.A2653 |
Quantity of import items at Sr. No. 4 & 5, shall be amended to read as under:-
“4. 1.54 kg/kg 5. 1.837 kg/kg” |
| 14. | 16 | Chemicals & Allied Products
Sr.No.A3069 (Amended vide Public Notice No. 46 Dated: 06/11/2002) |
The description of export item shall be amended to read as under:-
“Ferric Chloride 40% Concentration” |
| 15. | 21 | Chemicals & Allied Products
Sr.No.A3093 (Notified Vide Public Notice No.46 Dated:06.11.2002) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3093 | Phenocyanol | 1 kg | 1. Meta Phenoxy Benzaldehyde
2. Sodium Cyanide 3. Iso Propyl Ether |
0.871 kg
0.318 kg 0.136 kg |
-:8:-
| 16. | 22 | Chemicals & Allied Products
Sr.No.A3098 (Amended vide Public Notice No.46 Dated: 06/11/2002) |
After import item at Sr. No. 3, the following additional import item (with quantity) shal be added:-
“4. Methylene Dichloride – 1.10 kg” |
| 17. | 482 | Engineering Product
Sr.No.C27 |
The following Foot Note below this entry shall be added:-
“Note : 1. If the export product is Coated, in addition relevant Coating material may be allowed to the extent of 2% of the FOB value.” |
| 18. | 515 | Engineering Product
Sr.No.C206 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C206 | Enamelled Copper Wire | 1 kg | 1. Copper Rod / Copper Wire Rod (EC Grade)
2. Insulating enamel/ Varnishes |
1.01 kg/kg content in respect of he product having Diameter Upto 0.2 mm or 1.02 kg/kg Content in respect of the product having diameter above 0.2 mm
Upto 5% of FOB value of exports |
-:9:-
| 19. | 6-7 | Engineering Product
Sr.No.C517 (Notified vide Public Notice No.6 Dated:08/05/2003) |
The description of Foot Note. Nos 2, 3, & 4 shall be substituted by the following:-
“Note:2.In case of export of continuous cast billets/blooms/slabs, items at Sr.No.3(b) and 4(b)(i) shall not be allowed. Similarly against export of rolled bloom, billets, slabs through ingot route, refractory items 3(J) shall not be allowed. However, in case of export of rolled billets/ blooms/slabs produced out of continuous cast bloom/billets/slabs, both items mentioned at Sr.No.3(b) and 4(b) (i) shall be allowed. Further, against export of billets/blooms/slabs, quantities of all other inputs shall be reduced by 5%. Note:3. In case of export of Ingots, import of items at Sr.No. 3(b), (c), (d), (J) & 4(b) shall not be permitted. Further quantity of other inputs shall be reduced by 10%. Note:4. Quantity of Silico-Manganese shall not exceed 60% of total permitted quantity of 15 Kg” |
| 20. | 558 | Engineering Product
Sr.No.C375 |
The Foot Note at Sr. No. 2 shall be substituted by the following:-
“Note: 2. If the export product is painted / coated, in addition relevant paint/ coating material may be allowed to the extent of 4% of the FOB value” |
| 21. | 559 | Engineering Product
Sr.No.C381 |
The norm covered by this entry shall be deleted. |
-:10:-
| 22. | 605 | Engineering Product
Sr.No.C513 |
The description of import item at SR. No. 1, (without any change in quantity) shall be amended to read as under:-
“OR Non-alloy Steel Re-Rollable Scrap as per IS : 2549-1994” |
| 23. | 659 | Engineering Product
Sr.No.C837 |
The description of import item for export items (a) & (b) (without any change in quantity) shall be amended to read as under:-
“For export item (a) Stainless Steel Wide Coils/ Strips of relevant grade” “For export item (b) Stainless Steel Wide Coils/ Strips of relevant grade” |
| 24. | 829 | Engineering Product
Sr.No.C1579 |
The description of export item shall be amended to read as under:-
“Iron-Nickel Alloy(s) Wire/Strip of different composition”. |
| 25. | 829 | Engineering Product
Sr.No.C1580 |
The description of export item shall be amended to read as under:-
“Nickel Chromium Alloy(s) Wire/Strip of different composition”. |
| 26. | 829 | Engineering Product
Sr.No.C1581 |
The description of export item shall be amended to read as under:-
“Nickel- Copper Alloy(s) Wire/Strip of different composition”. |
-:11:-
| 27. | 43 | Engineering Product
Sr.No.C1878 (amended vide Public Notice No. 03 Dated:31/03/2003) |
The description of import item at Sr. No. 1, (without any change in quantity) shall be corrected to read as under:-
“HR Sheet / wide Coil of relevant grade of Steel”. |
| 28. | 46 | Engineering Product
Sr.No.C1884 (amended vide Public Notice No. 03 Dated:31/03/2003) |
The description of export item shall be corrected to read as under:-
“Seamless Steel Casing Tubes”. |
| 29. | 28 | Food Product
Sr.No.E110 (Amended vide Public Notice No.54 Dated:03/01/2003) |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| E110 | Wheat Flour/ Atta/ Suji/ Maida | 50 kg | 1. Relevant LDPE Bags (Inners)
2. Relevant HDPE Bags (Outer) |
1.01 kg/kg weight of the relevant Bag
1.01 kg/kg weight of the relevant Bag |
| 30. | 1038 | Plastics Product
Sr.No. H-429 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| H-429 | Textile / Polyester (Yarn Braided Thermoplastic Hose | 1 kg | 1. Relevant Tyride / Polyester Elastomer (Hytrel OR Arnitel) / Polyamide/ Polyurethane Resin
2. Relevant Polyester Yarn |
1.05 kg/kg content in export product
1.05 kg/kg content in export product |
-:12:-
| 31. | 1038 | Plastics Product
Sr.No. H-430 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| H-430 | Wire Braided Thermoplastic Hose/ Jack Gose/ Sewer Jetting Hose | 1 kg | 1. Relevant Tyride / Polyester Elastomer (Hytrel OR Arnitel) / Polyamide/ Polyurethane Resin
2. Relevant High Tensile Brass coated Steel Wire |
1.05 kg/kg content in export product
1.05 kg/kg content in export product |
| 32. | 1132 | Miscellaneous Products
Sr.No.K-74 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| K-74 | Sanitary Ware | 1000 kgs | 1. Zirconium Silicate/ Opacifier
2. Ceramic Colours OR White Prepared Pigments 3. Formers namely Bentonite, Alumina Limestone & Silica 4. Organic Binder relating to ceramic industry (Vinyl resin, HEC, Thermoplastic Resin) |
43 kgs
10 kgs 10 kgs 25 kgs 19 kgs |
| Note : Item 2 i.e. Ceramic Colours shall be allowed only in case where Coloured (Non-white) Sanitary ware is to be exported and import of white prepared pigment shall be allowed in the case of export of Sanitary ware (White). | ||||
-:13:-
| 33. | 22 | Miscellaneous Products
Sr.No.K-159 (Notified Vide Public Notice No. 15 Dated:07/07/2003) |
The SION entry at Sr. No. K-159 published by typographical mistake inFOOD Products Group but correct group shall be Miscellaneous Group. |
-:14:-
Annexure “B” to the
Public Notice No. 20
Dated: 01/08/2003
CHEMICALS AND ALLIED PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3212 | 2,6 Dipicolinic Acid | 1 kg | 1. 2,6 Lutidine
2. Potassium Permanganate |
1.20 kg
8.00 kg |
| A3213 | Alpha Picolinic Acid | 1 kg | 1. Alpha Picoline
2. Potassium permanganate |
1.50 kg
5.80 kg |
| A3214 | 5,5-Dimethyl Hydantoin | 1 kg | 1. Ammonium Bicarbonate
2. Acetone 3. Sodium Cyanide |
0.830 kg
0.609 kg 0.515 kg |
| A3215 | 1,3-Dichloro-5, 5-Dimethyl Hydantoin | 1 kg | 1. 5,5 Dimethyl Hydantoin | 0.733 kg |
| A3216 | Flush Magenta / Rubine for Printing Ink (containing Pigment 37% and Solid resin 25%) | 1 kg | 1. Pigment Magenta / Rubine namely Pigment Red 57:1 (C.I. No. 15850:1)/ Pigment Red 53:1 (C.I. No. 15850:1)
2. Printing Ink Vehicle Plain (Solid content 64-68%) 3. Alkyd Resin namely Soya Long Oil Alkyd Resin of 70% Oil length having solid content 100% 4. Petroleum Distilate (Distillation range 240-330 degree C) 5. Olyl Alcohol 6. Antioxident 7. Texanol Iso Butyrate |
0.389 kg
0.393 kg 0.1 kg 0.122 kg 0.012 kg 0.01 kg 0.023 kg |
-:15:-
| A3217 | Processed High alumina Body (containing 14 to 16% moisture) with binders for manufacture of ceramic products by Extrusion Process | 1000 kgs | 1. Calcined Alumina Powder
2. Luvitec K-90 (Binder) 3. Zusoplast PS1 (Plasticiser) 4. Noval K23 |
861 kg with 5% wastage on net content basis
15.75 kg with 12% wastage on net content basis 10.05 kg with 12% wastage on net content basis 2.625 kg with 12% wastage on net content basis |
| A3218 | Hard Board (Wood Chip Board) | 1 MT | 1. Relevant Wood Log
2. Linseed Oil 3. Montan Wax 4. Phenol 5. Formaldehyde 6. Furnace Oil 7. Paraffin Wax |
2.0 MT
0.70 kg 0.10 kg 1.30 kg 1.68 kg 185 Liters 2.33 kg |
| A3219 | Pour Point Depressant / Flow Improver (containing 40% Total Solid / NVM in Xylene) (Behnyl Ester of Terpolymer in Xylene with 40% NVM) | 1 kg | 1. Behenyl Alcohol
2. Xylene 3. Styrene |
0.332 kg
0.651 kg 0.059 kg |
-:16:-
| A3220 | Polyolefin Amide Alkeneamine A Dispersant Additive for Lubricanting Oil containing Base Oil 40% and Polybutene Succinic Anhydride Ethylene Amine condensed component – 60% | 1 kg | 1. Polybutene
2. Maleic Anhydride 3. Ethylene Amine 4. 150 Solvent Neutral (Mineral Oil) 5. Diatomaccous Earth (Filter Add) |
0.520 kg
0.0569 kg 0.0310 kg 0.400 kg 0.0007 kg |
| A3221 | An Ashless Oxidation inhibitor type of chemical Additive for Lubricating Oil containing 57% of Dodecyl Phenol Sulphide and 43% Mineral Oil | 1 kg | 1. Dodecyle Phenol
2. Mineral Oil |
0.514 kg
0.425 kg |
| A3222 | Fast Orange Salt RD (Azoic Diazo Component 49) (C.I. No. 37050) (Base as 4 Chloro 3 Amino Benzo Trifluloride content = 20%) | 1 kg | 1. 4-Chloro 3 Amino Benzo Trifluoride | 0.249 kg |
| A3223 | Tris (2,4 Ditert-butyl-Phenyl) Phosphite | 1 kg | 1. 2,4 Di-tertiary-Butyl Phenol
2. Phosphorous Tri Chloride 3. Dibutyl Amine 4. Iso propyl Alcohol |
1.1958 kg
0.266 kg 0.037 kg 0.268 kg |
-:17:-
| A3224 | Pigment Alkali Blue Flush (Pigment content 40%+/-2%, Solid Resin content minimum 40%) | 1 kg | 1. Aniline
2. Mono Chloro Benzene 3. Caustic Soda Flakes (Lye/ Flakes on 100% basis) 4. Soyabean Oil 5. Iso Phthalic Acid 6. Pentaerythritol 7. Petroleum Distillate (Distillation range 240-330 degree cen.) 8. Rosin 9. Fumaric Acid 10.Dodecyl Phenol 11.Paraformaldehyde 12.Para Octyl Phenol 13.Maliec Anhydride 14.Para Tertiary Butylated Phenol 15.Vista Oil 16.Dimer Fatty Acid 17.Aluminium Chelate |
1.084 kg
0.140 kg 0.772 kg 0.077 kg 0.013 kg 0.036 kg 0.241 kg 0.215 kg 0.005 kg 0.010 kg 0.015 kg 0.011 kg 0.001 kg 0.006 kg 0.003 kg 0.002 kg 0.006 kg |
| A3225 | Pigment Violet 19 (C.I. No. 73900) | 1 kg | 1. Dimethyl Succinylo Succinate
2. Dimethyl Formamide 3. Aniline 4. Polyphosphoric Acid |
0.830 kg
2.740 kg 0.778 kg 5.900 kg |
-:18:-
| A3226 | Poly isocyanate (Phenol Blocked Polyisocyanate Isocyanate content : 12.1 + 0.3% Colour & Appearance : Yellow Melting Point : 80 Degree – 95 Degree C | 1 kg | 1. Trimethylol Propane (TMP)
2. Phenol 3. Toluene di-Isocyanate (TDI) |
0.133 kg
0.354 kg 0.515 kg |
| A3227 | Normal Paraffin | 1 MT | 1. Kerosene
2. Hydrogen 3. Normal Pentane 4. Iso Octane 5. ADS 34 6. Hydrobon Catalyst 7. Heat Transfer Oil 8. Fuel Oil 9. Fullers Earth 10.Stripped Additives (Surfactant with anti-Corrosive Formulation (e.g. DA2305/SR 1200/SR 1253/N5186/EC 1008A) |
1.0 MT
0.0544 MT 0.7 kg 0.1 kg 0.2614 kg 0.047 kg 4.5 kg 0.471 kg 0.01 kg 0.084 kg |
| A3228 | Multi-layer Plastic Laminated Tubes with / without caps (5 layer printed) | 1 kg | 1. Relevant Plastic Laminated Film (core of Aluminium Foil covered on both sides with plastic film)
2. U.V. Ink |
1.12 kg/kg content in the export product
0.5% of weight of multilayer film in the export |
-:19:-
| 3. U.V. Varnish | 0.3 of weight of Multilayer film in the export product | |||
| A3229 | Acrylic Co-Polymer Beads | 1 kg | 1. Methyl Methacrylate Monomer
2. Divinyl Benzene 3. Poly Vinyl Alcohol |
1.106 kg
0.07 kg 0.02 kg |
| A3230 | Processed Bentonite Polyben Grade (Containing A-100 Polymer (Polyacrylate) = 1.5%) | 1 kg | 1. A-100 Polymer (Polyacrylate)
2. Soda Ash 3. Sodium Tri-poly Phosphate |
0.0153 kg
0.040 kg 0.0075 kg |
-:20:-
Annexure “C” to the
Public Notice No. 20
Dated: 01/08/2003
ENGINEERING PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C1901 | High Grade, annealed Sponge Iron Powder | 1 kg | 1. Raw (Un-annealed) Sponge Iron Powder | 1.01 kg |
| C1902 | Finished / Semi-Finished Ring Joint Gaskets made from Non-Alloy Steel Plates | 1 No. | 1. Non Alloy Steel Plates | 2.80 kg/kg content in export product |
| C1903 | Hot rolled Non-Alloy Steel Plate/ Sheet/ Strip/ Wide Coil | 1 MT | I- Major Inputs Comprising of :
a. Non-Alloy Steel Melting Scrap b. Low Ash (Ash: 12% max.) Non-Coking Coal/ Low Ash (Ash: 15% max.) Metallurgical Coke II – Additive comprising of : a. Low Silica (Silica:1% Max.) Limestone b. Bulk Ferro Alloys (Ferro – Silicon / Ferro Manganese/ Silico-Manganese |
175 kg
1100 kg 195 kg 6 kg |
-:21:-
| c. Other Ferro Alloys (Ferro Titanium / Ferro Molybdenum/ Ferro Niobium / Ferro Vanadium / Ferro Nickel/ Ferro Chrome/ Charge Chrome/ Ferro Boron/ Ferro Phosphorous) (provided the alloying element(s) is/are actually present in the Steel)
d. Aluminium Bars/ Wires/ Shots/ Cubes and /or Powder in Cored Wire e. Calcium Silicide Lumps and/or Powder in Cored Wire f. Calcined Petroleum Coke g. Calcium Carbide based Desulphurisation Compound III–Miscellaneous Inputs comprising of : a. Shaped Refractories (fired/ un-fired bricks/ Shapes) b. Monolithic Refractories (including Castables/ Ramming Mass/ Gunning Mixes |
3 kg
2.25 kg 1 kg 0.4 kg 2.6 kg 5 kg 4 kg |
-:22:-
| c. Special Refractories (continuous Casting Refractory namely, Ladle Shroud, M. B. Stopper, S.E. Nozzles/ Slide Gate Refractory / HMD Lances/ LF Lances/ Argon Purging Refractories / Tundish Striker Pads / Ceramic Stones/ Tundish Turbo Stop
d. CI/Steel Rolls for Hot Strip Mill e. Celox Inserts / Oxygen Measuring Probes f. Shear Blades / Saw Blades g. Ceramic Coated Oxygen Lancing Pipe h. Continuous Casting Powder i. Temperature Tips j. Graphite Electrodes for Ladle Furnace k. Copper Lined Mould for Casting l. Sampler Tips m. Rolls for Slab Caster |
1 kg
1 kg 0.1 No. 0.01 kg 0.02 No. 0.6 kg 0.1 Nos. 0.1 kg 0.02 kg 0.15 Nos. 0.5 kg |
-:23:-
| Note : 1. The above norm is applicable only if the export product (s) is/are manufactured through Corex furnace-LD converter route.
Note : 2. The norms shall also be applicable for export of continuously cast steel slabs. However import item allowed at Sr. No. III(d) shall not be allowed against export of such Slabs; and the quantity of all other import items allowed shall be reduced by 3%. Note : 3. Maximum quantity of Low Ash Metallurgical Coke allowed against Sr. No. I(b) shall be limited to 20% of the total quantity of 1100 kg. |
||||
| C1904 | Graphite Heat Exchanger (Cubical Block, Shell & Tube & Circular Block Type) | 1 No. | 1. Graphite Block
2. Graphite Tube 3. Non Alloy Steel Sheet 4. Bellows 5. Bellow Seal Assembly 6. Gasket 7. Flame Arrestor 8. PRP Blower 9. Quartz Glass 10. O Ring 11. Spring |
1.57 kg/kg content in the export product
1.37 kg/kg content in the export product 1.22 kg/kg content in the export product 2 Nos. 1 No. 57 Mtrs. 2 Nos. 2 Nos. 1 No. 9 Nos. 5 Nos. |
-:24:-
| C1905 | Stainless Steel Braided Teflon Hose Assembly for automotive application | 1 No. | 1. S.S. Braided Teflon Hose of relevant dia & grade
2. Seamless Steel Tubes of relevant dia & grade 3. Hardware |
1.02 Mtr./ Mtr. Content in export product
1.02 Mtr. / Mtr. Content in export product Net to net |
| C1906 | Zinc Plated Liquid Tight Steel Fitting with Ferrule & Locknut (Connector) – Size ½” to 4” | 1 No. | 1. Alloy / Non Alloy Hexagonal Steel bar (For Body & Nut)
2. Ferrules (made of (CRCA Sheet) 3. Polypropylene (For Seal) 4. LDPE Granules (For ‘O’ Ring) 5. Nylon-6 (For Insuliner) 6. H.R. Non Alloy Steel Coil / Sheet (For Locknut) 7. Zinc |
(a) 4 kg/kg content for sizes upto 2”
(b) 5 kg/kg content for size above 2” Net to net 1.05 kg/kg content 1.05 kg/kg content 1.05 kg/kg content 3.43 kg/kg content 0.7% of the Steel weight to be galvanized |
