(TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY PART-1-SECTION-1)

GOVERNMENT OF INDIA

MINISTRY OF COMMERCE

PUBLIC NOTICE NO. 09 (RE-2001)/1997-2002

NEW DELHI : DATED : 01/05/2000.

Attention is invited to Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time.

2. In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended.

3.  In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/ corrections at appropriate places as mentioned in Annexure “A” to this Public Notice shall be made.

4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-

CHEMICALS AND ALLIED PRODUCTS

After the existing entry at Sl.No.A-2403, the new entries from Sl.No.A-2404 to A-2428 shall be added as per Annexure “B” to this Public Notice.

ENGINEERING PRODUCTS

After the existing entry at Sl.No.C-1521, the new entries from Sl.No.C-1522 to C-1530 shall be added as per Annexure “C” to this Public Notice.

LEATHER PRODUCTS

After the existing entry at Sl.No.G-46, a new entry Sl.No.G-47 shall be added as per Annexure “C” to this Public Notice.

TEXTILE PRODUCTS

After the existing entry at Sl.No.J-311, a new entry Sl.No.J-312 shall be added as per Annexure “C” to this Public Notice.

5. In the Hand Book of Procedures (Vol.-2) 1997-2002, as amended, Input Output Norms are valid, in some cases, upto a specified period. In all such cases, validity of Input Output Norms shall stand extended upto 30th September, 2000.

This issues in Public interest.

Sd/-

(N.L. LAKHANPAL)

DIRECTOR GENERAL OF FOREIGN TRADE

(S. L. GUPTA)

DIRECTOR GENERAL OF FOREIGN TRADE

FOR DIRECTOR GENERAL OF FOREIGN TRADE

Annexure “A” to the

Public Notice No.9

Dated: 01/05/2000

AMENDMENTS/CORRECTIONS

Sr.

No.

Page

No.

Reference AMENDMENTS/CORRECTIONS
1 2 3 4
1. 14 Chemicals & Allied Products

Sl.No.A58

After import item No. 3(c) the following item along with quantity shall be added:-

“(d)Potassium Carbonate – 0.267 kg”

2. 17 Chemicals & Allied Products

Sl.No.A69

After import item No. 3(b) the following item along with quantity shall be added:-

“(c) Potassium Carbonate – 0.174 kg”

3. 19 Chemicals & Allied Products

Sl.No.A84

The norms covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty Allowed
A84 Betamethasone Dipropionate BP 93/USP 23 1 kg 1.17-Alpha 1-Di-Hydroxy-16-Beta Methyl-9-Beta, 11-Beta-Epoxy Prigma-1, 4-Diene-3, 20-Diene (DB-XI)

2.Triethyl Ortho Propionate/ Trimethyl Ortho Propionate

1.125 kg

 

 

 

0.65 kg

4. 35 Chemicals & Allied Products

Sl.No.A177

The description of import item No. 1 along with quantity shall be amended to read as under:-

“1. 6 APA – 0.49 kg

OR

i) Pencillin G Potassium – 1.568 BOU

ii)Methylene Chloride – 0.49 kg

iii)Pen. G Amidase – 0.822 gm”.

5. 44 Chemicals & Allied Products

Sl.No.A238

The norms covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty Allowed
A238 Flucloxacillin Sodium 1 Kg 1.Amino Penicillanic Acid (6 APA)

OR

1.a) Pencillin G

Potassium First

Crystal

b)Penicillin G

Amidase Enzyme

c)Methylene Chloride/

Butyl Acetate

1.FCMIC Chloride

OR

2. a)2-Fluoro-6-Chloro

Benzaldehyde

b)Hydroxylamine

Sulphate

c)Methyl Aceto

Acetate

0.502 kg

 

 

1.606 BOU

 

 

0.842 gm

 

0.502 kg

 

0.706 kg

 

0.806 kg

 

0.537 kg

 

0.77 kg

  d)Chloroform

e)Sodium Hydroxide

3. 2-Ethyl Hexanoic Acid

4. Methylene Chloride

5. Acetone

6. Chloroform

0.95 kg

0.76 kg

0.37 kg

1.30 kgs

0.50 kg

0.90 kg

6. 73 Chemicals & Allied Products

Sl.No.A487

The norms covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty Allowed
A487 Acid Black 172 (100% Dye content) 1 kg 1.Beta Napththol

2.Sodium Nitrite

3.Twitchell Oil

0.746 kg

0.251 kg

0.020 kg

7. 146 Chemicals & Allied Products

Sl.No.A1045

The norms covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty Allowed
A1045 Laboratory Equipment/ Glassware made of Fused Silica/ Quartz/ Borosilicate 1 kg · Relevant Fused Silica/ Quartz Borosilicate Tube of assorted size and thickness 1.70 kg
8. 164 Chemicals & Allied Products

Sl.No.A1280

The norms covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty Allowed
A1280 Cocoamidopropyl Betaine (36 +/- 2% Solids) (Active matter 29% minimum) 1 kg 1.Coconut Fatty Acid

OR

Methyl Ester of

Coconut fatty Acid

2.Dimethyl Amino Acid

3.Sodium Monochloro Acetate

OR

4.Monochloro Acetic Acid

5.Caustic Soda Flakes

0.187 kg

 

0.190 kg

 

0.087 kg

0.093 kg

 

 

0.077 kg

0.033 kg

9. 210 Chemicals & Allied Products

Sl.No.A1676

1. The description of the export product shall be amended to read as under:-

“Chlorobutyl or Bromobutyl/Natural Rubber Blended Tubes.”

2. The description of import item No. 1 shall be amended to read as under:-

“Relevant Chlorobutyl Rubber or Bromobutyl Rubber”

10. 214 Chemicals & Allied Products

Sl.No.A1687

The norms covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty Allowed
A1687 Metal fitted/ Bonded/ Un-bonded rubber Part (Moulded/ Extruded) including Engine Mounting and Automotive Parts 1 kg 1.Mild Steel Sheets/ coils/ Plates/ Rods/ Rounds/ Strips

 

1.Relevant Rubber Compound consisting of the following:-

2. (a) Relevant Natural Rubber/ Synthetic Rubber depending upon the description of the product to be exported

(b) Carbon Black

 

 

 

(c) Zinc Oxide

 

 

 

1.30 kg/kg content in the export product

 

 

0.63 kg/kg content of Rubber compound in the export product

0.126 kg/kg content of Rubber compound in the export product

0.0315 kg/kg content of Rubber compound in the export product

(d) Rubber Chemicals

viz. Antioxidant/

Accellerator/ retarder

And Peptizer

 

 

(e) Misc. chemicals viz. Stearic Acid, Insoluble Sulphur, Silicon Oil

 

3. Bonding agent

0.012 kg/kg content of Rubber compound in the export product

 

0.042 kg/kg content of Rubber compound in the export product

0.01 kg/kg of steel in the export product

Note:-1 The CIF value of rubber Chemicals and Miscellaneous Chemicals should not exceed 7% of FOB value of exports.

Note:-2 The bonding agents shall not be allowed for import in the case of metal unbonded part or fitted part.

11. 302 Chemicals & Allied Products

Sl.No.A2263

The description of import item No. 6 along with quantity shall be amended to read as under:-

“2- Methoxy Propene – 0.905 kg

OR

2,2-Dimethoxy Propane – 1.45 kg”

12. 307 Chemicals & Allied Products

Sl.No.A2302

The quantity of import item Nos. 8, 9, & 10 shall be amended to read as under:-

“8. Glass Vials – 11,500 Nos

9. Rubber Stopper – 11,000 Nos

10.Aluminium – 11,000 Nos”

Caps/Seals

13. 308 Chemicals & Allied Products

Sl.No.A2304

The quantity of import item Nos. 8, 9, & 10 shall be amended to read as under:-

“8. Glass Vials – 5,750 Nos

9. Rubber Stopper – 5,500 Nos

10.Aluminium – 5,500 Nos”

Caps/Seals

14. 443 Engineering Product

Sl.No.C187

The norms covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty Allowed
C187 A.Electric Lamp Caps (Alumi-nium)/ GLS Caps B22D & E 27/27 1000 pcs. 1.Aluminium Strip

OR

Aluminium Ingot

OR

Aluminium Scrap

 

1.Brass Strip

OR

Brass Cathode/ Rod

2.916 kg

 

2.974 kg

 

3.047 kg

 

0.224 kg

 

0.233 kg

 B. FTL Caps (G-13/35 mm)  1000 pcs.  1.Aluminium Strip

OR

Aluminium Ingot

2.Brass Pin

2.55 kg

2.601 kgs

2020 Nos.

C. FTL Caps (G-13/24 mm or 24.5 mm) 1000 pcs. 1.Aluminum Strip

OR

Aluminium Ingot

OR

Aluminium Scrap

1.Brass Pin

1.65 kg

 

1.683 kg

 

1.724 kg

2020 Nos.

15. 531 Engineering Product

Sl.No.C472

In the note below this norm, the words viz. “Table 2” shall be substituted by “Table 3”.
16. 657 Engineering Product

Sl.No.C1058

The description of export product alongwith quantity shall be corrected to read as under:-

“Lead Acid Storage – 1 No.”

Batteries of all types/

Battery Cells”

17. 720 Engineering Product

Sl.No.C1343

The norms covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty Allowed
C1343 Typewriter (Manual) with ABS Casing Top cover and Keyboard frame 1000 Nos. 1.High carbon Steel Strip (0.97 x 55 mm)

2.ABS Granules

3.Aluminium Alloy Ingots

574 kg

 

1250 kg

4700 kg

4.Steel wires (Tempered and hardened/ Profiles)

5.Steel Rollers

6.Steel Type sets

138 kg

 

8000 Nos.

45000 Nos.

18. 738 Engineering Product

Sl.No.C1400

The description of import item No. 1 shall be amended to read as under:-

“1. Aluminium Tube of relevant size in terms of LD/O.D.”

768 Engineering Table-2 The engineering Table-2 appearing at the end of Group-C (engineering Products) shall be deleted.
19. 69 Plastic Product

Sl.No.H66

The description of the export product shall be amended to read as under:-

“Disposable Plastic Cups, Glasses, Plates, Trays, Bowls, Containers & Lids made of Polystyrene.”

20. 960 Textile Product

Sl.No.J21

The description of the export product shall be amended to read as under:-

“Polyester/Cotton Blended Grey/Bleached Fabrics.”

21. 974 Textile Product

Sl.No.J68

After import item No. 1 the following item along with quantity shall be added:-

2.Raw cotton – 1.22 kg/kg content in the

export product.

22. 981& 982 Textile Product

Sl.No.J92

In import item No. 1, the following alternative item shall be added:-

“OR

Raw cotton for carded counts of yarn of 40s

& below – 1.225kg/kg content in the export

product

OR

Raw cotton for combed counts of yarn of

40s and below – 1.289kg/kg content in and

the export product

OR

Raw cotton for combed counts of yarn of

Above 40s “. – 1.325kg/kg content in the

Export product

23. 982 Textile Product

Sl.No.J93

In import item No. 2, the following alternative item shall be added:-

“OR

Raw cotton for carded counts of yarn of 40s

& below – 1.175 kg/kg content in the export

product

OR

Raw cotton for combed counts of yarn of

40s and below – 1.270kg/kg content in

the export product

OR

Raw cotton for combed counts of yarn of

Above 40s”. – 1.290kg/kg content in the

Export product

24. 982 Textile Product

Sl.No.J94

In import item No. 1, the following alternative item shall be added:-

“OR

Raw cotton for carded counts of yarn of 40s

& below – 1.225 kg/kg content in the export

product

OR

Raw cotton for combed counts of yarn of

40s and below – 1.289kg/kg content in the

export product

OR

Raw cotton for combed counts of yarn of

Above 40s” – 1.325kg/kg content in the export

Product

25. 982 Textile Product

Sl.No.J95

After import product No. 2, the following item along with quantity shall be added:-

“3. Raw cotton for carded counts of yarn of

40s & below – 1.225 kg/kg content in the

export product

OR

Raw cotton for combed counts of yarn of

40s and below – 1.289kg/kg content in the

export product

OR

Raw cotton for combed counts of yarn of

Above 40s”. – 1.325kg/kg content in the

Export product

26. 983 Textile Product

Sl.No.J100

The description of the export product shall be amended to read as under:-

“Combed Cotton/Melange Yarn of counts 40s and below”

27. 83 Textile Product

Sl.No.J101

The description of the export product shall be amended to read as under:-

“Combed Cotton/Melange Yarn of counts above 40s”

28. 983 & 984 Textile Product

Sl.No.J103

In import item No. 1 the following alternative item along with quantity shall be added:-

“OR

Raw cotton for carded counts of yarn of 40s

& below – 1.225 kg content in the export

product

OR

Raw cotton for combed counts of yarn of

40s and below – 1.289 kg content in the

export

OR

Raw cotton for combed counts of yarn of

Above 40s “. – 1.325 kg content in the export

Product”

29. 984 Textile Product

Sl.No.J105

In import item No. 2 the following alternative item with quantity shall be added:-

“OR

Raw cotton for carded counts of yarn of 40s

& below – 1.225 kg content in the export

product

OR

Raw cotton for combed Counts of yarn of

40s and below – 1.289 kg content in the

export product

OR

Raw cotton for combed counts of yarn of

Above 40s “.- 1.325 kg content in the export

Product”

30. 1000 Textile Product

Sl.No.J225

In import item No. 1 the following alternative item along with quantity shall be added:

“OR

Wool Yarn – 1.10 kg content in the export

Product”

31. 1005 Textile Product

Sl.No.J243

The norms covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty Allowed
J243 Shawls/Scarves/Mufflers & Made-ups made of 100% wool 1 kg 1.Scoured Wool

 

 

 

OR

Wool Top

 

 

 

1.308 kg

content in

the export

product

 

1.198 kg

content in

the export

product

OR

Wool Yarn

1.10 kg

content in

the export

product

32. 1012 Textile Product

Sl.No.J300

The quantity of the import item No.1 shall be corrected to read as under:-

“0.90 Mtrs”

33. 1042 Miscellaneous Product

Sl.No.K122

The quantity of the import item No.4 shall be corrected to read as under:-

“166 Sq. Mtrs”

34. 1043 Miscellaneous Product

Sl.No.K123

The quantity of the import item No.4 shall be corrected to read as under:-

“174 Sq. Mtrs”

35. 1043 Miscellaneous Product

Sl.No.K124

The quantity of the import item No.4 shall be corrected to read as under:-

“183 Sq. Mtrs”

Annexure “B” to the

Public Notice No.9

Dated: 01/05/2000

CHEMICALS AND ALLIED PRODUCTS

Sl.No. Export Item Qty. Import Item Qty. Allowed
A2404 Antimony Trisulphide 99.8% purity 1 kg 1.Antimony Trioxide

2.Sodium Sulphide

0.900 kg

0.300 kg

A2405 Cloxacillin Benzathine 1 kg 1.Potassium Penicillin G First Crystal

2.Penicillin G Amidase

3.3-(2-Chlorophenyl)-5-Methyl Isoxazole-4-Carbonyl Chloride)(CMIC Chloride)

OR

i.Ortho Chloro Bezaldehyde

ii.Hydroxyl Amine Sulphate

iii.Methyl Aceto Acetate

iv.Chloroform

1.Activated Carbon

2.Methylene Chloride

3.Acetone

4.Chloroform

5.Isopropyl Alcohol

1.645 BOU

 

0.863 gm

0.628 kg

 

 

 

0.666 kg

0.50 kg

 

1.332 kg

0.950 kg

100 gm

2.28kg

0.476 kg

0.952 kg

0.50 kg

A2406 Ketoconazole USP 23 1 kg 1.2,4 Dichloro Acetophenone

2.Imidazole

3.1-Acetyl-4-(4-Hydroxy Phenyl) Piperazone

4.Toluene

5.Methanol

6.Dimethyl formamide

7.Acetone

8.Dimethyl Sulfoxoide

1.365 kg

 

1.584 kg

0.776 kg

9.12 kg

14.35 kg

0.90 kg

3.60 kg

1.566 kg

A2407 2-(Hydroxy Methyl) 3,5, Dimethyl-4- Methoxy Pyridine (Omeprazole Intermediate) 1 kg 1.2,3,5, Tri Methyl Pyridine

2.N-Butanol

3.Methylene Chloride

4.Activated Carbon

5.Phosphotungstic Acid (CAT-44)

1.990 kg

 

4.000 kg

10.000 kg

0.200 kg

0.100 kg

A2408 4-Amino-2- (4-(1,4- Benzodioxan-2- Carbonyl)- Piperazin-1- YL)-6, 7-Dimethoxy auinozoline monomethane Sulfonate (Doxazosin Mesyleate) 1 kg 1.(a) 6, 7 Dimethoxy Quinazoline- 2, 4 Dione

(b) Dimethyl Acetamide

(c) Tetrahydrofuran

OR

4-Amino 2-Chloro 6, 7- Dimethoxy Quina-zoline

1.N-(1,4-Benzodioxan-2-YL Carbonyl)- Piperazine

2.Methane Sulfonic Acid

3.Dimethyl formamide

4.Methanol

2.05 kg

0.54 kg

2.83 kg

 

1.11 kg

 

1.29 kg

 

0.29 kg

1.80 kg

4.90 kg

A2409 Loratadine 1 kg 1.3-Chloro Benzyl Cyanide

OR

3-Chloro Benzyl Dehyde

OR

3-Chloro Benzyl Chloride

2.Methyl/Ethyl Nicotinide

3.4-Chloro-N-Methyl Piperidine

4.N,N dimethyl Carbonyl chloride

5.Tetrahydrofuran

8.62 kg

 

8.00 kg

 

9.21 kg

8.63Kg

1.84 kg

5.00Kg

 

22.00 kg

6.Methylene Chloride

7.Acetonitrile/Dimethyl Sulfoxide

8.Di-Isopropylamine/ Triethyl Amine

22.00 kg

16.50 kg

 

0.50 kg

A2410 Carbamazepine  1 kg 1.Iminodibenzyl

OR

2. (a)Ortho Nitro Toluene

(b)Sodium Methoxide

(c)Cyclo Hexane

(d)Isopropyl Alcohol

(e)Toluene

(f)Methanol

3.Potassium Hydroxide

4.Bromine

5.Orthodichloro Benzene

6.Toluene

7.Acetone/DMF/ Ethylene Dichloride

1.55 kg

 

4.29 kg

 

1.19 kg

2.51 kg

0.52 kg

1.53 kg

2.15 kg

0.93 kg

0.39 kg

1.30 kg

1.21 kg

2.00 kg

A2411 Ceramic Colour Yellow orange (containg : Antimony Trioxide 28.8%) 1 kg 1. Antimony Trioxide 0.297 kg
A2412 Aceto Acet Ortho Anisidine 1 kg 1.Acetic Acid

2. Ortho Anisidine

0.855 kg

0.745 kg

A2413  PVC Folder/ Polypropylene Files/ ZIP Lock Bag 1 No. 1.Relevant PVC Polypropylene Sheet

2.Relevant Book Binding Board

3.Relevant components as Contain the export product

a.Paper Filling Machanism

b.Metal Rado Slots

c.Metal Fingerings

d.Metal Riverts

1.05 kg/kg content in the export product

1.05 kg/kg content in the export product

 

 

Net to net

Net to net

Net to net

Net to net

A2414 PVC Folder/ Polypropylene Files/Zip Lock Bag 1 No. 1.Relevent PVC/Polypropylene sheet

2.Relevent Book Binding Board

3.Relevent components as contain the export product.

a)Paper Filling Mechanism

b)Metal Rado Slots

c)Metal Fingerings

d)Metal Riverts

1.05 kg/kg content in the export product

1.05 kg/kg content in the export product

 

Net to net

 

Net to net

Net to net

Net to net

A2415 Brief Card  1 MT 1.Wood Pulp

2.Calcium Carbonate Clay

3.Latex

4.CMC (Carboxy Methyl Cellulose)

5.Wetend Chemicals

6.Laminating Chemicals

7.Stretch Film

8.Poly Kraft Paper

0.9525 kg

0.019 kg

0.0076 kg

0.004 kg

 

0.0600 kg

0.049 kg

0.0013 kg

0.015 kg

A2416 Diphenyl Isodecyl Phosphite (DPOP) 1 kg 1.Phenol

2.Isodecyl Alcohol

0.558 kg

0.419 kg

A2417 C-8(3-Hydroxy Naphthalene-2 Carbonyl –(3 Morpholine– Propyl-Amine) 1 kg 1.4- (3 Amino Propyl) Morpholine

2.BON Methyl Ester

0.600 kg

0.841 kg

A2418 Irgaphor Green 1736 1,4 Tetrakis- (2,4-Dimethylpenthyl-3- oxo) 1,4-Tribromo-1,4-(Formyl) Phthalocynate Palladium(II) 1 kg 1.2,4- Dimethyl – 3-Pentanol

2.Sodium Hydride (60% dispersion in paraffin)

3.Palladium chloride

4.N-Methyl Formanilide

1.206 kg

 

0.415 kg

0.238 kg

1.178 kg

A2419 Irgaphor Green HW 627 (Tetra (2,4 Dimethyl-3- Pentyloxy) Palladium Phthalocyanine) 1 kg 1.2,4, Dimethyl-3- Pentanon

2.Sodium Hydride (60% dispersion in paraffin)

3.Palladium Chloride

1.022 kg

0.352 kg

 

0.183 kg

A2420 Novasol Yellow G liquid (Solvent Yellow 124) (Dye content 55%) 1 kg 1.Vinyl Isobutyl Ether

2.Aromatic Hydro-carbon Solvent C10-C11 (Shellsol AB Aromatic 150)

0.517 kg

0.562 kg

A2421 Opaque white polyester chip  1 kg 1.DMT

2.MEG

3.Barium Sulphate

4.DMIP

5.Antifoam

6.Calcium Acetate

7.Manganese Acetate

8.TPP

0.819 kg

0.297 kg

0.185 kg

0.014 kg

0.00001 kg

0.0007 kg

0.000125 kg

0.0014 kg

A2422 Black – Centred Board 1 MT 1.Wood Pulp

2.Calcium Carbonate Clay

3.Latex (5% concentration)

4.Wet end chemicals Retention Aid, AKD Dimer of Fatty Acid AKD Emulsifier Resin 216, AKD Stabiliser 472 Optical Brightening Agent Cutionic Starch Oxide Starch

5.Coating Chemicals (Carboxy Methyl Cellulose, Lubricant, Insolubilizer, Optical brightening Agent, Dispersant, NaOH, coating starch)

6.Laminating Chemicals (Starch, Carboxy, Methyl Cellulose Insolubilizer)

7.Stretch Film

8.Polykraft paper

0.992 kg

0.122 kg

0.0114 kg

 

0.0505 kg

 

 

 

 

0.0173 kg

 

 

 

0.0196 kg

As per packing policy

A2423 Polytetrafluoroethylene Dispension (Emulsion Grade, TFE content 59.5+/-0.5%) 1 MT 1.Chloroform

2.Perfluoro-octanic Acid (FC-26)

4.3 MT

0.0075 MT

A2424 Silicone Polymer RS-103 (Trimethyl Sliyl Vinyl Methyl Polysiloxame) 1 kg Residual Polymer Mixture (Average content-95%) 1.2 kg
A2425 PVC Braided Hoses with Synthetic Yarn (Nylon/Polyester) 1 kg 1.PVC Resin

2.Dioctyl Ohthalate

3.PVC Stabilizer

4.Relevant Synthetic Yarn (Nylon/ Polyester)

0.7 kg

0.250 kg

0.030 kg

0.070 kg

N B: 1. The quantity of inputs at S.No. 1,2 & 3 are for PVC compound weight of 933 gms in the export product. For any variation in the PVC compound weight the items at S.No. 1,2 & 3 shall be allowed adopting the following formula:

AXB

933

Where A= Quantity allowed for 933 gm PVC compound

B= Weight of PVC compound in the export product

Note: 2 The quantity of relevant Synthetic yarn at S. No. 4 is for 67 gm of yarn in the export product. For any variation in the relevant yarn weight, the relevant yarn shall be allowed adopting the following formula:-

CXD

67

Where C= Quantity allowed for 67 gm yarn content in the export product

D= Weight of relevant Synthetic yarn in the export product

A2426 Glyphosate 41% W/WSL 1 kg 1.Isopropyl Amine Salt of Glyphosate Tech. (62%)

2.Surfactant (Inert Polyoxyethylene)

0.668 kg

 

0.150 kg

A2427 1-Ethyl-6Hydroxy 4-Methyl-2Pyridine 3-Carbonylamide 1 kg 1.Ethyl Cyanoacetate

2.Mono ethyl Amine

3.Methyl Aceto acetate

0.688 kg

0.315 kg

0.692 kg

A2428 Nylon 6/66 Co-polymer mono-filament yarn (soft grade) 1 kg 1.Nylon 6/66 Copolymer Chips

2.Antioxidant

3.Surface Active Agent

4.Finish Oil

5.Relevant PP/PS granules for bobbins

1.05kg/kg

0.002 kg

0.001 kg

0.001 kg

1.05 kg/kg content in the export product

Note: For the export of Nylon 6/66 co-polymer mono-filament yarn (soft grade) upto 500 mtrs length in smaller disposable bobbins/ coils, nylon 6/66 co-polymer chips shall be allowed at the rate of 1.08 kg/kg instead of 1.05 kg/kg in the export product.

Annexure “C” to the

Public Notice No.9

Dated: 01/05/2000

ENGINEERING PRODUCTS

Sr.No. Export Item Qty. Import Item Qty Allowed
C1522 Pneumatic Tool- Balancer with balance Capacity above 75 1b (34.1 kg) upto and including 210 1b (95.5 kg). 1 No. 1.Relevent Bearing Ball

2.Relevant Gear Worm

3.Relevant Shaft-worm gear

4.Relevant Retainer ball (thrust)

5.Relevant Race Retainer

6.Relevant Ball Race

7.Relevant Worm

8.Relevant Ball Bearing

9.Relevant Guide Plate

10.Relevant Stop Shield

11.Relevant Housing Cable drum

12.Relevant Stop Assembly

13.Relevant Hook Assembly Swivel

14.Relevant Housing- cover

15.Relevant Cover

16.Relevant Hub-main spring

1 No.

1 No

1 No.

1 No.

 

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

 

1 No.

1 No.

1 No.

1 No.

2 Nos.

17.Relevant Assembly Main Spring and retainer

18.Relevant Hook

19.Relevant Cable

20.Relevant Clamp cable

21.Relevant Separator plate

22.Relevant Housing cable drum

23.Relevant Main spring anchor

2 Nos.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

Note: The import of components shall be allowed on net to net basis with accountability clause.
C1523 Pneumatic Tool- Clay Digger/Utility Hammer (picks) Latch Retainer with Chuck 7/8″hex x 3 ¼” (22.2 mm x 82.6 mm) without muffler. 1 No. 1.Relevant Cylinder

2.Relevant Sleeve

3.Relevant Retainer Latch

4.Relevant Latch Bushing

5.Relevant Handle & Bush Assembly

6.Relevant Lever Chit

7.Relevant Lever Pin

8.Relevant Throttle Valve

9.Relevant Retainer Latch Pin

10.Relevant Valve

11.Relevant Piston

12.Relevant Upper valve case Lid

13.Relevant Lower Valve case Lid

1 No.

1 No.

1 No.

1 No.

1 No.

 

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

14.Relevant Valve Case

15.Relevant Back Head Bolt

1 No.

2 Nos.

Note: The import of components shall be allowed on net to net basis with accountability clause.
C1524 Pneumatic Tool- Clay Digger/ Utility Hammer (picks) Latch Retainer with Chuck 7/8″hex x 3 ¼” (22.2 mm x 82.6 mm) with muffler. 1 No. 1.Relevant Cylinder

2.Relevant Sleeve

3.Relevant Retainer Latch

4.Relevant Latch Bushing

5.Relevant Handle & Bush Assembly

6.Relevant Lever Chit

7.Relevant Lever Pin

8.Relevant Throttle Valve

9.Relevant Retainer Latch Pin

10.Relevant Valve

11.Relevant Piston

12.Relevant Upper valve case Lid

13.Relevant Lower Valve case Lid

1 No.

1 No.

1 No.

1 No.

1 No.

 

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

14.Relevant Valve Case

15.Relevant Back Head Bolt

16.Relevant Hood-Muffler complete

1 No.

2 Nos.

1 No.

Note: The import of components shall be allowed on net to net basis with accountability clause.
 C1525  Pneumatic Tool Balancer with balance capacity upto 75 lb (34.1 kg)  1No. 1.Relevent Main Spring Anchor

2.Relevent Bearing Ball

3.Relevent Drum cable Assembly

4.Relevent Gear worm

5.Relevent Shaft worm gear

6.Relevent Retainer ball(Thrust)

7.Relevent Race Retainer

8.Relevent Ball race

9.Relevent worm

10.Relevent ball bearing

11.Relevent Guide plate

12.Relevent stop shield

13.Relevent Housing cable drum

14.Relevent stop assembly

15.Relevent Hook Assembly Swivel

16.Relevent cover

17.Relevent Hub main spring

18.Relevent Assembly main spring and retainer

19.Relevent hook

20.Relevent cable

21.Relevent Clamp cable

22.Relevent Latch

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

2 Nos.

1 No.

1 No.

 

1 No.

1 No.

 

1 No.

Note: The import of components shall be allowed on net to net basis with accountability clause.
C1526 Pneumatic Tool Reversible Drill with the speed of 350 R.P.M. and above upto and including 750 R.P.M. 1 No. 1.Relevent Air Handle Cap

2.Relevent Valve

3.Relevent Live air Handle sleeve

4.Relevent Governer plunger

5.Relevent Governer stop pin

6.Relevent Governer bushing

7.Relevent Governer weight

8.Relevent Governer body

9.Relevent Governer pin

10.Relevent Reverse sleeve

11.Relevent ball bearing

12.Relevent dead handle

13.Relevent Universal Joint

14.Relevent round plug

15.Relevent end plate

16.Relevent ball bearing

17.Relevent Liner

18.Relevent rotor

19.Relevent spindle collar

20.Relevent end plate

21.Relevent spindle gear

22.relevent gear case

23.Relevent collar

24.Relevent gear pinion

25.Relevent ball bearing

26.Relevent sleeve

27.Relevent oil regulating plug

28.Relevent dowel

29.Relevent muffler cover

30.Relevent feed post

31.Relevent bearing

32.Relevent feed sleeve handle

33.Relevent transfer plate

34.Relevent cylinder cap

35.Relevent spindle

36.Relevent feed sleeve centre

37.Relevent feed sleeve

38.Relevent socket shank

39.Relevent dowel

40.Relevent cylinder & bushing assembly

41.Relevent live air handle stem & bush

1 No.

1 No.

1 No.

 

1 No.

 

1 No.

1 No.

 

2 Nos.

 

1 No.

1 No.

1 No.

 

2 Nos.

1 No.

1 No.

 

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

2 Nos.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

 

1 No.

1 No.

 

1 No.

1 No.

1 No.

3 Nos.

1 No.

 

1 No.

C1527 Pneumatic Tool- Non Reversible Drill with the speed of 350 RPM and above upto and including 750 RPM. 1 No. 1.Relevant Cap

2.Relevant Valve

3.Relevant Live Air handle sleeve

4.Relevant Adaptor Flange

5.Relevant Governor bushing

6.Relevant Governor weight

7.Relevant Governor body

8.Relevant Governor pin

9.Relevant cylinder

10.Relevant Ball Bearing

11.Relevant Dead Handle

12.Relevant End Plate

13.Relevant Ball Bearing

14.Relevant throttle roller protector

15.Relevant Cylinder liner

16.Relevant Rotor

17.Relevant Spindle collar

18.Relevant end plate

19.Relevant Spindle gear

20.Relevant Gear case

21.Relevant Collar

22.Relevant Gear Pinion

23.Relevant Ball Bearing

1 No.

1 No.

1 No.

 

1 No.

1 No.

 

2 Nos.

1 No.

1 No.

1 No.

1 No.

2 Nos.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No

2 Nos.

 24.Relevant Spindle

25.Relevant Bearing

26.Relevant Transfer Plate

27.Relevant Cylinder cap

28.Relevant Governor Stop Pin

29.Relevant G Plunger

30.Relevant Dowel

31.Relevant Dowel

32.Relevant Stem & Bushing Assembly

1 No.

1 No.

1 No.

1 No.

1 No.

 

1 No.

3 Nos.

1 No.

1 No.

Note: The import of components shall be allowed on net to net basis with accountability clause.
C1528 Pneumatic Tool- Reversible Drill with the speed above 100 RPM upto and including 350 RPM. . 1.Relevant Centre

2.Relevant Bushing

3.Relevant end plate

4.Relevant Feed Post

5.Relevant Rotor

6.Relevant Liner

7.Relevant rotor housing assembly

8.Relevant Plate

9.Relevant Ball Bearing

10.Relevant spindle gear

11.Relevant Gear case assembly

12.Relevant throttle valve

13.Relevant end Plate

14.Relevant Gear Stud

15.Relevant Ball Bearing

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

 

1 No.

1 No.

 

1 No.

1 No.

1 No.

16.Relevant Valve cage

17.Relevant Valve pin

18.Relevant Bearing clamp nut

19.Relevant Governor Lever

20.Relevant Governor body

21.Relevant Governor push pin

22.Relevant Ball Bearing

23.Relevant Nut

24.Relevant Governor weight

25.Relevant Muffler

26.Relevant Transfer Plate

27.Relevant Collar

28.Relevant roller race

29.Relevant roller bearing assembly

30.Relevant Retainer washer

31.Relevant packing nut

32.Relevant extractor pin

33.Relevant gear pinion

34.Relevant internal gear

35.Relevant internal gear

36.Relevant Ball Bearing

37.Relevant Ball Bearing

38.Relevant Dead handle

39.Relevant live air handle stem assembly

1 No.

1 No.

1 No.

 

1 No.

1 No.

 

1 No.

1 No.

 

1 No.

2 Nos.

 

1 No.

1 No.

1 No.

1 No.

1 No.

2 Nos.

1 No.

1 No.

1 No.

1 No.

1 No.

2 Nos.

3 Nos.

1 No.

1 No.

  40.Relevant Sleeve

41.Relevant set screw

42.Relevant throttle valve

43.Relevant throttle cap

44.Relevant seat

45.Relevant universal joint

46.Relevant sleeve

47.Relevant retainer sleeve

48.Relevant protection sleeve

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

49.Relevant throttle valve plate

50.Relevant ball bearing

51.Relevant cylinder cap

52.Relevant Feed sleeve handle

53.Relevant Screw

54.Relevant Spindle

55.Relevant Bearing spacer

56.Relevant Dowel

1 No.

 

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

 

2 Nos.

Note: The import of component shall be allowed on net to net basis with accountability clause.
C1529 Pneumatic Tool- Reversible Drill with the speed upto 100 R.P.M. 1 No. 1.Relevant Centre

2.Relevant Bushing

3.Relevant end plate

4.Relevant Feed Post

5.Relevant Rotor

6.Relevant Liner

7.Relevant Rotor housing assembly

8.Relevant Dead Handle

9.Relevant Plate

10.Relevent Ball Bearing

11.Relevent throttle valve

12.Relevent end plate

13.Relevent gear stud

14.Relevent ball bearing

15.Relevent nut

16.Relevent muffler

17.Relevent protection sleeve

18.Relevent governer lever

19.Relevent governer push pin

20.Relevent ball bearing

21.Relevent nut

22.Relevent Muffler

23.Relevent protection sleeve

24.Relevent throttle cap

25.Relevent roller bearing assembly

26.Relevent packing nut

27.Relevent ball bearing

28.Relevent ball bearing

29.Relevent transfer plate

30.Relevent cylinder cap

31.Relevent feed sleeve handle

32.Relevent throttle valve

33.Relevent screw

34.Relevent roller race

35.Relevent retainer washer

36.Relevant throttle valve plate

37.Relevant seat

38.Relevant Collar

39.Relevant sleeve

40.Relevant Retainer sleeve

41.Relevant sleeve

42.Relevant Universal Joint

43.Relevant Extractor Pin

44.Relevant Governor Body

45.Relevant Spindle

46.Relevant Bearing spacer

47.Relevant Internal gear

48.Relevant gear pinion

49.Relevant internal gear

50.Relevant spindle gear

51.Relevant Governor weight

52.Relevant set screw

53.Relevant Dowel

54.Relevant Live air handle stem assembly

55.Relevent gear case assembly

56.Relevent ball bearing

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

 

1 No.

1 No.

 

1 No.

1 No.

 

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

 

1 No.

1 No.

1 No.

2 Nos.

1 No.

 

1 No.

1 No.

1 No.

1 No.

 

1 No.

1 No.

1 No.

1 No.

 

1 No.

1 No.

 

1 No.

1 No.

1 No.

1 No.

4 Nos.

1 No.

2 Nos.

 

1 No.

1 No.

 

2 Nos.

Note : The import of components shall be allowed on net to net basis with accountability clause.

C1530 Movements for Electrical Measuring Instruments type: Moving iron, Moving Coil, Dynamo Meter, Bimetallic Reed Type, Namely Volt Meter, Ammeter, Frequency Meter WATT meter, multimeters Insulation testers, Maximum Demand Indicator, Power factor meter. 1 No. 1.Plastic Moulding Powder:

a.ABS

b.Polycarbonate

c.Polyphenylene Oxide

d.Polyacetal

e.Polycarbonate

f.Polyamide

g.Phenol Formaldehyde (Bakelite) Power and Moulded components thereof

2.Silicon Oils

3.Industrial Jewels with screws

4.Pivots

5.Hair Springs

6.Super Enamelled Copper wire

7.Duralumin Rods Free Cutting Aluminium Rods, Capillary Tubes:

  1. Copper Bars/strips
  2. Manganin wire/Rods
  3. Eureka Wire/ Rods
50 gms

 

 

Net+5% wastage

 

 

 

 

 

1 gm

2 Nos.

2 Nos.

Net to net

Net to net

 

Net+2% wastage

 

 

 

  8.Magnet Centre Core

9.Coil former

10.Mumetals Permalloy strips & components thereof

11.Pointers/Pointer Arms

12.Tant Bands/ Ligaments

13.Barllium Copper/ Phospher/Bronze strips

 

 

14.Aluminum Die Castings

15.Bimetallic Springs

16.Springs Steel Strips

17.Transistors, Capacitors, IC’s & other electronic Components not covered by Other input entries

18.Yoke

19.Hybride Circuits

20.Zener Diodes

21.Yoke Holder

22.Lower Boss/under Boss

Net to net

1 No.

Net to net

 

Net to net

Net to net

 

Net+5% wastage (Qty restricted to 20 gms)

Net to net

2 Nos.

Net to net

Net to net

 

1 No.

1 No.

2 Nos.

1 No.

1 No.

Annexure “D” to the

Public Notice No.9

Dated: 01/05/2000

LEATHER PRODUCTS

Sl.No. Export Item Qty. Import Item Qty Allowed
G47 Finished Leather Sofa Cover (Stitched) 1000 Sq. ft. 1.Relevant lining

 

 

 

2.Polyester wading

 

 

3.Zippers

 

4.Velcro

5.Runner (slider)

 

6.Relevant double fused tape

1.05 sq.mtr./ sq. mtr content in the export product

1.05 sq.mtr./ sq. mtr content in the export product

Net + 1% wastage

Net + 2% wastage

Net + 1% wastage

Net + 1 % wastage

Note: 1. The items thread and needle shall not be allowed

2. The norms for the chemical items are to be allowed as per SION G-7 of furnished Leather.

Annexure “E” to the

Public Notice No.9

Dated: 01/05/2000

TEXTILE PRODUCTS

Sr.No. Export Item Qty. Import Item Qty Allowed
J312 Wool/Silk blended Shawls/Scarves/Mufflers and made-ups kg 1.Scoured wool

 

 

OR

Wool Top

 

 

OR

Wool Yarn

 

1.Spun Silk Yarn

1.31 kg/kg content in the export product

 

1.21 kg/kg content in the export product

 

1.10 kg/kg content in the export product

1.05 kg/kg content in the export product

More Under DGFT

Posted Under

Category : DGFT (3421)
Tags : DGFT Notifications (3370)

Leave a Reply

Your email address will not be published. Required fields are marked *