Public Notice No. 35 (RE-2001)/1997-2002, Dated: 03.09.2001

No.

No.

Sr.No.A160

“14. Chlorine – 0.560 kg”.

Sr.No.A162

“11. Chlorine – 0.560 kg”.

Sr.No.A163 (amended vide Public Notice No. 19 Dated: 03/07/2000)

“16. Chlorine – 0.500 kg”.

Sr.No.A251

2. Epichlorohydrin

OR

Alpha Glyceryl

Monochlorohydrin

0.64 kg

0.62 kg

Sr.No.A254

OR

Dicyanadiamide

2. Ammonium Nitrate

0.600 kg

0.700 kg

Sr.No.A1539

“3. Meta Para Cresol”

Sr.No.A1674

“1. Rubber Accelerator – Alkyl Phenol Disulphide/ Dipenta Methelene Thivram Tetra Sulfide”

Sr.No.A1882

OR

1. a)2,6 Dimethyl Aniline

b)Methyl 2 Chloro

Propionate

c)Sodium Iodide

d)Tetra Butyl Ammo-

nium Bromide

e)Sodium Bicarbonate

2. Methoxy Acetyl Chloride

0.640 kg

0.730 kg

0.060 kg

0.0165 kg

0.575 kg

0.480 kg

2.a)Methoxy Acetic Acid

b)Thionyl Chloride

3. Dimethyl Formamide

4. Toluene

5. Hexame

6. Caustic Soda

0.600 kg

0.378 kg

0.5 kg

0.407 kg

0.415 kg

Sr.No.A 1913

Sr.No.A1989

Sr.No.A 2423 (Amended vide Public Notice No. 09 Dated: 01/05/2000)

Sr.No.A2446 (Amended vide Public Notice No. 25 Dated: 01/08/2000)

2. Perfluoro-Octanic Acid (FC-Z6)

3. Anhydrous Hydro Fluoric Acid

0.0075 MT

1.42 MT

Sr.No.A2466 (Amended vide Public Notice No. 32 Dated: 01/09/2000)

“5 Amino 3 Methyl 1 Phenyl Pyrazol”

Sr.No.A2501 (As amended vide Public Notice No. 42 Dated: 1.12.2000)

“Lithium Bromide Solution 53%”

Sr.No.A2557 (Amended vide Public Notice No. 04 Dated: 31/03/2001)

“Dimethyl Lauryl Benzyl Ammonium Chloride 80%”

Sr.No.C508 (Amended vide Public Notice No. 36 Dated: 03.10.2000)

“1(ii)Energy Sources/ – 2626330 K Cal.

Fuels(Natural Gas/LNG,

NGL(condensate/ gaseous),

Naphtha, Light Diesel Oil,

Furnace Oil) (Only for plants

having captive power plant with

facilities installed for use

of specific energy sources/

fuels).”

“1(iii)Energy Sources/ – 565670 K. Cal.

Fuels (Natural Gas/

LNG, NGL (condensate/

gaseous), Naphtha, High

Speed Diesel Oil, Furnace

Oil) (for re-heating furnaces

in rolling mills, ladle heating

& fundish pre-heating).”

“Note:- 4.Import of either one or a combination of the energy sources/fuels mentioned against S.Nos. 1(ii) & 1(iii) shall be permitted within the overall calorific value, subject to further actual user condition.

Note:- 5.Quantity of specific fuel(s) in Kgs/Cubic meter/K.Ltr shall be obtained by dividing the K. Cal figure by the net calorific value/heat value of the fuel(s) as detailed below:-

Net Calorific values of Fuels

1. Natural Gas – 8,400 K.Cal/Cubic Meter

2. LNG – 11,436 K. Cal/Kg

3. Naptha – 10,610 K. Cal/Kg

4. NGL – 10,610 K. Cal/Kg

5. LDO – 10,060 K. Cal/Kg

7. HSD – 10,230 K. Cal./kg

Note:- 6. These norms are not applicable to DFRC Scheme as per General Note No.7 in Standard Input Output Norms Book.”

Sr.No.C608

Sr.No.C690

“Cryogenic Tanks for Liquidified Gases.”

Sr. No. C- 829 (Amended vide Public Notice No. 12 Dated: 1.6.2000)

Sr.No.C1638 (amended vide Public Notice No. 04 Dated: 31.03.2001)

“1. Aluminium Ingot – 1.15 Kg.

OR

Rolled Aluminium – 1.05 Kg”

Sheets in Coil Form

Sr.No.C-1640 (Amended vide Public Notice No. 04 Dated: 31.03.2001)

2. Fibreglass Sewing Thread

3. Stainless Steel Strip AISI 301

0.023 kg

0.025 kg

Sr.No.H-85

2. Pentane (Iso + Normal)

3. a) Softnal 3118 (Mono

Acid Diglyceride)

b) Softnal 3995 (Glyceryl Mono Sterate)

c) Tricalcium Phosphate

83.438 kgs

1.4 kg

1.52 kg

3.598 kgs

e) Adwax 280 (N-N Ethylene Bis Steramide)

OR

4. a) Protective Colloid

b) Benzoyl Peroxide

c) Tertiary Butyl Perbenzote

d) Hexabromide

e) Additive 451

f) Polyethylene Wax

g) Alfa Methyl Styrene Dimmer

h) Antistatic Agent

i) Etingal A

1.0 kg

0.013 kg

0.00152 kg

0.00247 kg

0.0002 kg

0.0022 kg

0.00096 kg

0.00042 kg

0.0001 kg

0.00016 kg

Sr.No.H-119

2. Polybutadiene Rubber

3. Plasticizer

4. Mineral Oil (Liquid Paraffin)

OR

0.0632 kg

0.0116 kg

0.0103 kg

ii) Polybutadiene Rubber

iii) Mineral (Liquid Paraffin)

0.8750 kg

0.0221 kg

Sr.No.H-230

2. Master Batch (Polypropylene Dyed Chips/ Relevant Colour Master Batches

3. U. V. Stabilizer

4. Spin Finish Oil

4.15 kgs

0.75 kg

2.33 kgs

2. Fumaric Acid

3. Dodecyl Phenol

4. Paraformaldehyde

5. Pentaerythritol

6. Para Ocyl Phenol

0.024 kg

0.044 kg

0.053 kg

0.099 kg

0.052 kg

2. Seed Virus

3. Tryptose

4. Gentamycin Sulphate

5. Redox Stabilser

6. Glass Vials

7. Rubber Stoppers

8. Aluminium Caps

.00012 Nos

.00079 Gms

.00020 Gms

.00053 Ltrs.

1.0800 Nos

1.0800 Nos

1.0800 Nos

2. Caustic Soda Lye (45%)

0.155 kg

2. Caustic Soda (solid)

3. Formaldehyde (37%)

4. Melamine

5. Urea

6. Sodium Bisulfite

40.00 kgs

489.00 kgs

83.20 kgs

234.00 kgs

228.00 kgs

2. Monochloro acetic acid

3. Methyl Ethyl ketone

0.086 kg

1.00 kg

2. Potassium Hydroxide

0.367 kg

2. Maleic Anhydride

3. Para Tertiary Butylated Phenol

4. Paraformaldehyde

5. Bis Phenol-A

6. Pentaerythritol

7. Vista Oil

8. Dimer Fatty Acid

0.021 kg

0.094 kg

0.047 kg

0.007 kg

0.114 kg

0.040 kg

0.031 kg

2. Polybutylene Terephthalate

3. Additives (Heat Stabilizers – Phosphite based, Sulfide based; Light Stabilizers – Benzotriazole based; Stabilizers – Phosphate based, Epoxy based; Anti Oxidants – Phenolic based; Processing Aids – Sterates; Flame Retardant – Sulphonate based, Bromine based; Anti Dripping Agent – PTFE based – SB203, MBS Rubber, SVS Rubber)

4. Pigments (Chromium Oxide, green, Iron Oxide, Carbon Black,

0.39 kg

0.17 kg

0.024 kg

Note: 2. Combination of various additives and Pigments is to be permitted within the quantities indicated against each.

2. UVA 1577 {2-(4,6 diphenyl-1,3,50 Triaz in-2yl) 5-(Hexy) oxyl-Phenol}

3. Polycarbonate Powder

4. Colorants (Relevant)

OR

1. Polycarbonate Resin

2. Additives (Heat Stabilizers – Phosphite based,Light Stabilizers – Benzotriazole based; Stabilizers – Epoxy based, Phosphite based; Anti Oxidants – Phenolic based; Processing Aids – Silicone Oil, Sterates;

0.04725 kg

1.00219 kg

0.00003 kg

1.0430 kg

0.0047 kg

Phosphate based,

Sulphonate based,

Bromine based; Anti

Dripping Agent – PTFE

based)

3. Pigments (Chromium Oxide, Green, Iron Oxide, Carbon Black, Titanium Dioxide, Thiophene Brightner, Anthraquinone – Violet/ Green, Quinophtaine Yellow, Styrol Yellow, Quinacridone – Red, Antrapyridone Red Dye, Thio Indigo Dye Compound, Phtalprinone Red Dye, Imide Derivatives)

OR

1. TNPP (Tris(nonyl Phenol) Phosphite)

2. Tinuvin 234 {2-(2H-Benz-Otriazol-2-yl) –4-6, Bis (1-Methyl-1-Phenylethyl) Phenol)

3. Polycarbonate Powder

4. Colorant (Relevant)

0.00105 kg

0.10500 kg

0.94374 kg

0.00021 kg

Note: 2.Combination of various additives and Pigments is to be permitted within the quantities indicated against each.

2. Additives (Stabilizers – Sulfide based, Phosphite based, Epoxy based, Phosphate based; Light Stabilizers – Benzotriazole based; Anti Oxidants – Phenolic based; Processing Aids- Sterates; Flame Retardant – Sulphonate based/ Bromine based; Anti Dripping Agent – PTFE based – SB203)

3. Pigments (Chromium Oxide, Green, Iron Oxide, Carbon Black, Titanium Dioxide, Thiphene Brightner, Anthraquinone – Violet/ Green/ Yellow/Red, Solvent Red; Phtalocyanine – Blue/ Green, Quinophtaine Yellow, Styrol Yellow, Quinacridone – Red, Perylene – Red, Methine Orange Dye, Anthrapyridone Red Dye, Thio Indigo Dye Compound,

0.21 kg

0.019 kg

Dye, Imide

Derivatives)

4. Glass Fibre

Note: 2. Combination of various additives and Pigments is to be permitted within the quantities indicated against each.

2. Additives (Heat Stabilizers – Sulfide based; Light Stabilizers – Benzotriazole based; Anti Oxidants – Phenolic based, Epoxy based Stabilizers; Processing Aids – Sterates; Flame Retardant – Phosphate/ Sulphonate based; MBS Rubber, SBS Rubber)

3. Pigments (Chromium Oxide, Green, Iron Oxide, Carbon Black, Titanium Dioxide, Thiphene Brightner, Anthraquinone – Violet/ Green/ Yellow/ Red, Solvent Red; Phtalocyanine – Blue/ Green,

0.042 kg

0.010 kg

4. Glass Fibre

5. High Impact Polystyrene

0.480 kg

Note: 2. Combination of various additives and Pigments is to be permitted within the quantities indicated against each.

2. Additives (Stabilizers – Sulfide based, Phosphite based; Light Stabilizers – Benzotriazole based; Stabilisers – Epoxy based, Phosphate based; Processing Aids Silicone Oil, Sterates; Flame Retardant Phosphite based, Bromine based; Anti Dripping Agent PTFE based – SB203)

0.026 kg

4. Glass Fibre

0.117 kg

Note: 2. Combination of various additives and Pigments is to be permitted within the quantities indicated against each.

2. Polyol

3. Di-Isocyanate

4. Ink Additives

5. Pigment Carbon Black

86.26 kgs

18.80 kgs

84.06 kgs

105.00 kgs

2. Polyol

3. Di-Isocyanate

4. Ink Additives

5. Titanium Dioxide

72.30 kgs

15.80 kgs

30.41 kg

278.00 kgs

2. Plasticizer (Thiakol)

3. Processing Aids (A C Polyethylene, Polythylene – Glycol – 4000)

4. Nylon Yarn 6 Industrial Grade (410+/- 10 Denier)

5. Polyamide Granules (Ultramid 1c & Ultramid 6a natural)

6. Polyamide Sheets

7. Bonding Agent (Resorcinol)

0.058 kg/kg of the Rubber compound content in export

0.01 kg/kg of the Rubber compound content in export

1.05 kg/kg content of Nylon fabric

0.003 kg/kg content in export product

1.050 kg/kg content in export product

0.015 kg

2. Thiakol Plasticiser

3. Processing Aid (A C Polyethylene Glycol 4000)

4. Nylon 6 Yarn Industrial Grade (410 +/- 10 Denier)

0.0735 kg/kg of the Rubber Compound content in the export product

0.0105 kg/kg of the Rubber Compound content in the export product

1.10 kg/kg of Nylon Fabric in export product

2. Acetic Anhydride

3. Soda Ash

4. Caustic Soda Flakes

0.034 kg

0.207 kg

0.170 kg

2. Abrasive Wheel

3 Nos.

2. ABS

3. Aluminium Strips

4. TP Elastomer

5. GP Polystyrene

6. Polyox Coagulant

7. Polyox VSRN 750

8. GP Polystrene

9. Polyterafluoro-ethylene

10. Grinding Wheel

11. Sritting Sheel

10518 kg

63.65 kg

3605 kg

1304 kg

44 kg

44 kg

38 kg

0.9 kg

3 Pcs.

6 Pcs.

2. Stainless Steel Hard Wire 1.60 mm

3. Stainless Steel Hard Wire 1.00 mm

4. Stainless Steel Hard Wire 4.00 mm

32 Kgs.

32 Kgs.

32 Kgs.

6. Power Cord with Plug

7. On-Off switch

8. Relevant Achromatic objective lens

9. Lamp Holder

10. Socket with fuse

11. Polyurethane Paint/ Grease

1000 Nos.

1000 Nos.

1000 Nos.

1000 Nos.

1000 Nos.

Upto 2% of FOB Value

2. T/P Boot Seal

3. Clamps

4. Molykote VN-2461 C Lithium Grease

5. CV Joint Grease

6. Shaft Ring

7. T/P Housing Blank

8. C/V Outer Race Blank

9. Spider Tripot Joint

10. C/V Inner Race

2 Nos.

6 Nos.

0.25 Kg.

0.25 Kg.

2 Nos.

2 Nos.

2 Nos.

2 Nos.

2 Nos.

2. T/P Boot Seal

3. Clamps

4. Molykote VN-2461 C Lithium Grease

5. CV Joint Grease

6. Shaft Ring

7. T/P Housing Blank

8. C/V Outer Race Blank

9. Spider Tripot Joint

10. C/V Inner Race

11. ABS Ring

2 Nos.

6 Nos.

0.25 Kg.

0.25 Kg.

2 Nos.

2 Nos.

2 Nos.

2 Nos.

2 Nos.

2 Nos.

C1692

Stainless Steel LPG Stove with/ without auto Ignition

1 No.

1. Stainless Steel Sheet/ Coil of relevant grade

2. Gas Valves with/ without Ignition Unit

3. Brass Honey Scrap

1.15 Kg/ Kg content in the export product

Net to Net with accoun-tability

1.06 Kg/Kg content in export product

Note:- If the product is exported without Auto Ignition Unit, the import item No. 2 viz. Gas Valve shall be allowed without Ignition Unit.

C1693

Hot Forged Steel nuts

1 No.

1. Forged Blank Nut without thread of Relevant grade of alloy/ non alloy steel and relevant size

1 No.

C1694

Copper Bonded Ground Rods UL approved (0.01 Inches copper coating)

1 Kg

1. M. S. Bright Bars/ Wire Rods

2. Copper Bar/ Cathodes/ Wire Bars

0.97 kg

0.08 kg