(TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY PART-1-SECTION-1)
GOVERNMENT OF INDIA
MINISTRY OF COMMERCE
PUBLIC NOTICE NO. 09 (RE-2001)/1997-2002
NEW DELHI : DATED : 01/05/2000.
Attention is invited to Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time.
2. In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended.
3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/ corrections at appropriate places as mentioned in Annexure “A” to this Public Notice shall be made.
4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-
CHEMICALS AND ALLIED PRODUCTS
After the existing entry at Sl.No.A-2403, the new entries from Sl.No.A-2404 to A-2428 shall be added as per Annexure “B” to this Public Notice.
ENGINEERING PRODUCTS
After the existing entry at Sl.No.C-1521, the new entries from Sl.No.C-1522 to C-1530 shall be added as per Annexure “C” to this Public Notice.
LEATHER PRODUCTS
After the existing entry at Sl.No.G-46, a new entry Sl.No.G-47 shall be added as per Annexure “C” to this Public Notice.
TEXTILE PRODUCTS
After the existing entry at Sl.No.J-311, a new entry Sl.No.J-312 shall be added as per Annexure “C” to this Public Notice.
5. In the Hand Book of Procedures (Vol.-2) 1997-2002, as amended, Input Output Norms are valid, in some cases, upto a specified period. In all such cases, validity of Input Output Norms shall stand extended upto 30th September, 2000.
This issues in Public interest.
Sd/-
(N.L. LAKHANPAL)
DIRECTOR GENERAL OF FOREIGN TRADE
(S. L. GUPTA)
DIRECTOR GENERAL OF FOREIGN TRADE
FOR DIRECTOR GENERAL OF FOREIGN TRADE
Annexure “A” to the
Public Notice No.9
Dated: 01/05/2000
AMENDMENTS/CORRECTIONS
| Sr.
No. |
Page
No. |
Reference | AMENDMENTS/CORRECTIONS |
| 1 | 2 | 3 | 4 |
| 1. | 14 | Chemicals & Allied Products
Sl.No.A58 |
After import item No. 3(c) the following item along with quantity shall be added:-
“(d)Potassium Carbonate – 0.267 kg” |
| 2. | 17 | Chemicals & Allied Products
Sl.No.A69 |
After import item No. 3(b) the following item along with quantity shall be added:-
“(c) Potassium Carbonate – 0.174 kg” |
| 3. | 19 | Chemicals & Allied Products
Sl.No.A84 |
The norms covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty Allowed |
| A84 | Betamethasone Dipropionate BP 93/USP 23 | 1 kg | 1.17-Alpha 1-Di-Hydroxy-16-Beta Methyl-9-Beta, 11-Beta-Epoxy Prigma-1, 4-Diene-3, 20-Diene (DB-XI)
2.Triethyl Ortho Propionate/ Trimethyl Ortho Propionate |
1.125 kg
0.65 kg |
| 4. | 35 | Chemicals & Allied Products
Sl.No.A177 |
The description of import item No. 1 along with quantity shall be amended to read as under:-
“1. 6 APA – 0.49 kg OR i) Pencillin G Potassium – 1.568 BOU ii)Methylene Chloride – 0.49 kg iii)Pen. G Amidase – 0.822 gm”. |
| 5. | 44 | Chemicals & Allied Products
Sl.No.A238 |
The norms covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty Allowed |
| A238 | Flucloxacillin Sodium | 1 Kg | 1.Amino Penicillanic Acid (6 APA)
OR 1.a) Pencillin G Potassium First Crystal b)Penicillin G Amidase Enzyme c)Methylene Chloride/ Butyl Acetate 1.FCMIC Chloride OR 2. a)2-Fluoro-6-Chloro Benzaldehyde b)Hydroxylamine Sulphate c)Methyl Aceto Acetate |
0.502 kg
1.606 BOU
0.842 gm
0.502 kg
0.706 kg
0.806 kg
0.537 kg
0.77 kg |
| d)Chloroform
e)Sodium Hydroxide 3. 2-Ethyl Hexanoic Acid 4. Methylene Chloride 5. Acetone 6. Chloroform |
0.95 kg
0.76 kg 0.37 kg 1.30 kgs 0.50 kg 0.90 kg |
| 6. | 73 | Chemicals & Allied Products
Sl.No.A487 |
The norms covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty Allowed |
| A487 | Acid Black 172 (100% Dye content) | 1 kg | 1.Beta Napththol
2.Sodium Nitrite 3.Twitchell Oil |
0.746 kg
0.251 kg 0.020 kg |
| 7. | 146 | Chemicals & Allied Products
Sl.No.A1045 |
The norms covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty Allowed |
| A1045 | Laboratory Equipment/ Glassware made of Fused Silica/ Quartz/ Borosilicate | 1 kg | · Relevant Fused Silica/ Quartz Borosilicate Tube of assorted size and thickness | 1.70 kg |
| 8. | 164 | Chemicals & Allied Products
Sl.No.A1280 |
The norms covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty Allowed |
| A1280 | Cocoamidopropyl Betaine (36 +/- 2% Solids) (Active matter 29% minimum) | 1 kg | 1.Coconut Fatty Acid
OR Methyl Ester of Coconut fatty Acid 2.Dimethyl Amino Acid 3.Sodium Monochloro Acetate OR 4.Monochloro Acetic Acid 5.Caustic Soda Flakes |
0.187 kg
0.190 kg
0.087 kg 0.093 kg
0.077 kg 0.033 kg |
| 9. | 210 | Chemicals & Allied Products
Sl.No.A1676 |
1. The description of the export product shall be amended to read as under:-
“Chlorobutyl or Bromobutyl/Natural Rubber Blended Tubes.” 2. The description of import item No. 1 shall be amended to read as under:- “Relevant Chlorobutyl Rubber or Bromobutyl Rubber” |
| 10. | 214 | Chemicals & Allied Products
Sl.No.A1687 |
The norms covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty Allowed |
| A1687 | Metal fitted/ Bonded/ Un-bonded rubber Part (Moulded/ Extruded) including Engine Mounting and Automotive Parts | 1 kg | 1.Mild Steel Sheets/ coils/ Plates/ Rods/ Rounds/ Strips
1.Relevant Rubber Compound consisting of the following:- 2. (a) Relevant Natural Rubber/ Synthetic Rubber depending upon the description of the product to be exported (b) Carbon Black
(c) Zinc Oxide
|
1.30 kg/kg content in the export product
0.63 kg/kg content of Rubber compound in the export product 0.126 kg/kg content of Rubber compound in the export product 0.0315 kg/kg content of Rubber compound in the export product |
| (d) Rubber Chemicals
viz. Antioxidant/ Accellerator/ retarder And Peptizer
(e) Misc. chemicals viz. Stearic Acid, Insoluble Sulphur, Silicon Oil
3. Bonding agent |
0.012 kg/kg content of Rubber compound in the export product
0.042 kg/kg content of Rubber compound in the export product 0.01 kg/kg of steel in the export product |
|||
| Note:-1 The CIF value of rubber Chemicals and Miscellaneous Chemicals should not exceed 7% of FOB value of exports.
Note:-2 The bonding agents shall not be allowed for import in the case of metal unbonded part or fitted part. |
||||
| 11. | 302 | Chemicals & Allied Products
Sl.No.A2263 |
The description of import item No. 6 along with quantity shall be amended to read as under:-
“2- Methoxy Propene – 0.905 kg OR 2,2-Dimethoxy Propane – 1.45 kg” |
| 12. | 307 | Chemicals & Allied Products
Sl.No.A2302 |
The quantity of import item Nos. 8, 9, & 10 shall be amended to read as under:-
“8. Glass Vials – 11,500 Nos 9. Rubber Stopper – 11,000 Nos 10.Aluminium – 11,000 Nos” Caps/Seals |
| 13. | 308 | Chemicals & Allied Products
Sl.No.A2304 |
The quantity of import item Nos. 8, 9, & 10 shall be amended to read as under:-
“8. Glass Vials – 5,750 Nos 9. Rubber Stopper – 5,500 Nos 10.Aluminium – 5,500 Nos” Caps/Seals |
| 14. | 443 | Engineering Product
Sl.No.C187 |
The norms covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty Allowed | ||||||||
| C187 | A.Electric Lamp Caps (Alumi-nium)/ GLS Caps B22D & E 27/27 | 1000 pcs. | 1.Aluminium Strip
OR Aluminium Ingot OR Aluminium Scrap
1.Brass Strip OR Brass Cathode/ Rod |
2.916 kg
2.974 kg
3.047 kg
0.224 kg
0.233 kg |
||||||||
| B. FTL Caps (G-13/35 mm) | 1000 pcs. | 1.Aluminium Strip
OR Aluminium Ingot 2.Brass Pin |
2.55 kg
2.601 kgs 2020 Nos. |
|||||||||
| C. FTL Caps (G-13/24 mm or 24.5 mm) | 1000 pcs. | 1.Aluminum Strip
OR Aluminium Ingot OR Aluminium Scrap 1.Brass Pin |
1.65 kg
1.683 kg
1.724 kg 2020 Nos. |
|||||||||
| 15. | 531 | Engineering Product
Sl.No.C472 |
In the note below this norm, the words viz. “Table 2” shall be substituted by “Table 3”. |
| 16. | 657 | Engineering Product
Sl.No.C1058 |
The description of export product alongwith quantity shall be corrected to read as under:-
“Lead Acid Storage – 1 No.” Batteries of all types/ Battery Cells” |
| 17. | 720 | Engineering Product
Sl.No.C1343 |
The norms covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty Allowed |
| C1343 | Typewriter (Manual) with ABS Casing Top cover and Keyboard frame | 1000 Nos. | 1.High carbon Steel Strip (0.97 x 55 mm)
2.ABS Granules 3.Aluminium Alloy Ingots |
574 kg
1250 kg 4700 kg |
| 4.Steel wires (Tempered and hardened/ Profiles)
5.Steel Rollers 6.Steel Type sets |
138 kg
8000 Nos. 45000 Nos. |
| 18. | 738 | Engineering Product
Sl.No.C1400 |
The description of import item No. 1 shall be amended to read as under:-
“1. Aluminium Tube of relevant size in terms of LD/O.D.” |
| 768 | Engineering Table-2 | The engineering Table-2 appearing at the end of Group-C (engineering Products) shall be deleted. |
| 19. | 69 | Plastic Product
Sl.No.H66 |
The description of the export product shall be amended to read as under:-
“Disposable Plastic Cups, Glasses, Plates, Trays, Bowls, Containers & Lids made of Polystyrene.” |
| 20. | 960 | Textile Product
Sl.No.J21 |
The description of the export product shall be amended to read as under:-
“Polyester/Cotton Blended Grey/Bleached Fabrics.” |
| 21. | 974 | Textile Product
Sl.No.J68 |
After import item No. 1 the following item along with quantity shall be added:-
2.Raw cotton – 1.22 kg/kg content in the export product. |
| 22. | 981& 982 | Textile Product
Sl.No.J92 |
In import item No. 1, the following alternative item shall be added:-
“OR Raw cotton for carded counts of yarn of 40s & below – 1.225kg/kg content in the export product |
| OR
Raw cotton for combed counts of yarn of 40s and below – 1.289kg/kg content in and the export product OR Raw cotton for combed counts of yarn of Above 40s “. – 1.325kg/kg content in the Export product |
| 23. | 982 | Textile Product
Sl.No.J93 |
In import item No. 2, the following alternative item shall be added:-
“OR Raw cotton for carded counts of yarn of 40s & below – 1.175 kg/kg content in the export product OR Raw cotton for combed counts of yarn of 40s and below – 1.270kg/kg content in the export product OR Raw cotton for combed counts of yarn of Above 40s”. – 1.290kg/kg content in the Export product |
| 24. | 982 | Textile Product
Sl.No.J94 |
In import item No. 1, the following alternative item shall be added:-
“OR Raw cotton for carded counts of yarn of 40s & below – 1.225 kg/kg content in the export product OR Raw cotton for combed counts of yarn of 40s and below – 1.289kg/kg content in the export product OR Raw cotton for combed counts of yarn of Above 40s” – 1.325kg/kg content in the export Product |
| 25. | 982 | Textile Product
Sl.No.J95 |
After import product No. 2, the following item along with quantity shall be added:-
“3. Raw cotton for carded counts of yarn of 40s & below – 1.225 kg/kg content in the export product OR Raw cotton for combed counts of yarn of 40s and below – 1.289kg/kg content in the export product OR Raw cotton for combed counts of yarn of Above 40s”. – 1.325kg/kg content in the Export product |
| 26. | 983 | Textile Product
Sl.No.J100 |
The description of the export product shall be amended to read as under:-
“Combed Cotton/Melange Yarn of counts 40s and below” |
| 27. | 83 | Textile Product
Sl.No.J101 |
The description of the export product shall be amended to read as under:-
“Combed Cotton/Melange Yarn of counts above 40s” |
| 28. | 983 & 984 | Textile Product
Sl.No.J103 |
In import item No. 1 the following alternative item along with quantity shall be added:-
“OR Raw cotton for carded counts of yarn of 40s & below – 1.225 kg content in the export product OR Raw cotton for combed counts of yarn of 40s and below – 1.289 kg content in the export OR Raw cotton for combed counts of yarn of Above 40s “. – 1.325 kg content in the export Product” |
| 29. | 984 | Textile Product
Sl.No.J105 |
In import item No. 2 the following alternative item with quantity shall be added:-
“OR Raw cotton for carded counts of yarn of 40s & below – 1.225 kg content in the export product |
| OR
Raw cotton for combed Counts of yarn of 40s and below – 1.289 kg content in the export product OR Raw cotton for combed counts of yarn of Above 40s “.- 1.325 kg content in the export Product” |
| 30. | 1000 | Textile Product
Sl.No.J225 |
In import item No. 1 the following alternative item along with quantity shall be added:
“OR Wool Yarn – 1.10 kg content in the export Product” |
| 31. | 1005 | Textile Product
Sl.No.J243 |
The norms covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty Allowed |
| J243 | Shawls/Scarves/Mufflers & Made-ups made of 100% wool | 1 kg | 1.Scoured Wool
OR Wool Top
|
1.308 kg
content in the export product
1.198 kg content in the export product |
| OR
Wool Yarn |
1.10 kg
content in the export product |
| 32. | 1012 | Textile Product
Sl.No.J300 |
The quantity of the import item No.1 shall be corrected to read as under:-
“0.90 Mtrs” |
| 33. | 1042 | Miscellaneous Product
Sl.No.K122 |
The quantity of the import item No.4 shall be corrected to read as under:-
“166 Sq. Mtrs” |
| 34. | 1043 | Miscellaneous Product
Sl.No.K123 |
The quantity of the import item No.4 shall be corrected to read as under:-
“174 Sq. Mtrs” |
| 35. | 1043 | Miscellaneous Product
Sl.No.K124 |
The quantity of the import item No.4 shall be corrected to read as under:-
“183 Sq. Mtrs” |
Annexure “B” to the
Public Notice No.9
Dated: 01/05/2000
CHEMICALS AND ALLIED PRODUCTS
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed | ||||||
| A2404 | Antimony Trisulphide 99.8% purity | 1 kg | 1.Antimony Trioxide
2.Sodium Sulphide |
0.900 kg
0.300 kg |
||||||
| A2405 | Cloxacillin Benzathine | 1 kg | 1.Potassium Penicillin G First Crystal
2.Penicillin G Amidase 3.3-(2-Chlorophenyl)-5-Methyl Isoxazole-4-Carbonyl Chloride)(CMIC Chloride) OR i.Ortho Chloro Bezaldehyde ii.Hydroxyl Amine Sulphate iii.Methyl Aceto Acetate iv.Chloroform 1.Activated Carbon 2.Methylene Chloride 3.Acetone 4.Chloroform 5.Isopropyl Alcohol |
1.645 BOU
0.863 gm 0.628 kg
0.666 kg 0.50 kg
1.332 kg 0.950 kg 100 gm 2.28kg 0.476 kg 0.952 kg 0.50 kg |
||||||
| A2406 | Ketoconazole USP 23 | 1 kg | 1.2,4 Dichloro Acetophenone
2.Imidazole 3.1-Acetyl-4-(4-Hydroxy Phenyl) Piperazone 4.Toluene 5.Methanol 6.Dimethyl formamide 7.Acetone 8.Dimethyl Sulfoxoide |
1.365 kg
1.584 kg 0.776 kg 9.12 kg 14.35 kg 0.90 kg 3.60 kg 1.566 kg |
||||||
| A2407 | 2-(Hydroxy Methyl) 3,5, Dimethyl-4- Methoxy Pyridine (Omeprazole Intermediate) | 1 kg | 1.2,3,5, Tri Methyl Pyridine
2.N-Butanol 3.Methylene Chloride 4.Activated Carbon 5.Phosphotungstic Acid (CAT-44) |
1.990 kg
4.000 kg 10.000 kg 0.200 kg 0.100 kg |
||||||
| A2408 | 4-Amino-2- (4-(1,4- Benzodioxan-2- Carbonyl)- Piperazin-1- YL)-6, 7-Dimethoxy auinozoline monomethane Sulfonate (Doxazosin Mesyleate) | 1 kg | 1.(a) 6, 7 Dimethoxy Quinazoline- 2, 4 Dione
(b) Dimethyl Acetamide (c) Tetrahydrofuran OR 4-Amino 2-Chloro 6, 7- Dimethoxy Quina-zoline 1.N-(1,4-Benzodioxan-2-YL Carbonyl)- Piperazine 2.Methane Sulfonic Acid 3.Dimethyl formamide 4.Methanol |
2.05 kg
0.54 kg 2.83 kg
1.11 kg
1.29 kg
0.29 kg 1.80 kg 4.90 kg |
||||||
| A2409 | Loratadine | 1 kg | 1.3-Chloro Benzyl Cyanide
OR 3-Chloro Benzyl Dehyde OR 3-Chloro Benzyl Chloride 2.Methyl/Ethyl Nicotinide 3.4-Chloro-N-Methyl Piperidine 4.N,N dimethyl Carbonyl chloride 5.Tetrahydrofuran |
8.62 kg
8.00 kg
9.21 kg 8.63Kg 1.84 kg 5.00Kg
22.00 kg |
||||||
| 6.Methylene Chloride
7.Acetonitrile/Dimethyl Sulfoxide 8.Di-Isopropylamine/ Triethyl Amine |
22.00 kg
16.50 kg
0.50 kg |
|||||||||
| A2410 | Carbamazepine | 1 kg | 1.Iminodibenzyl
OR 2. (a)Ortho Nitro Toluene (b)Sodium Methoxide (c)Cyclo Hexane (d)Isopropyl Alcohol (e)Toluene (f)Methanol 3.Potassium Hydroxide 4.Bromine 5.Orthodichloro Benzene 6.Toluene 7.Acetone/DMF/ Ethylene Dichloride |
1.55 kg
4.29 kg
1.19 kg 2.51 kg 0.52 kg 1.53 kg 2.15 kg 0.93 kg 0.39 kg 1.30 kg 1.21 kg 2.00 kg |
||||||
| A2411 | Ceramic Colour Yellow orange (containg : Antimony Trioxide 28.8%) | 1 kg | 1. Antimony Trioxide | 0.297 kg | ||||||
| A2412 | Aceto Acet Ortho Anisidine | 1 kg | 1.Acetic Acid
2. Ortho Anisidine |
0.855 kg
0.745 kg |
||||||
| A2413 | PVC Folder/ Polypropylene Files/ ZIP Lock Bag | 1 No. | 1.Relevant PVC Polypropylene Sheet
2.Relevant Book Binding Board 3.Relevant components as Contain the export product a.Paper Filling Machanism b.Metal Rado Slots c.Metal Fingerings d.Metal Riverts |
1.05 kg/kg content in the export product
1.05 kg/kg content in the export product
Net to net Net to net Net to net Net to net |
||||||
| A2414 | PVC Folder/ Polypropylene Files/Zip Lock Bag | 1 No. | 1.Relevent PVC/Polypropylene sheet
2.Relevent Book Binding Board 3.Relevent components as contain the export product. a)Paper Filling Mechanism b)Metal Rado Slots c)Metal Fingerings d)Metal Riverts |
1.05 kg/kg content in the export product
1.05 kg/kg content in the export product
Net to net
Net to net Net to net Net to net |
||||||
| A2415 | Brief Card | 1 MT | 1.Wood Pulp
2.Calcium Carbonate Clay 3.Latex 4.CMC (Carboxy Methyl Cellulose) 5.Wetend Chemicals 6.Laminating Chemicals 7.Stretch Film 8.Poly Kraft Paper |
0.9525 kg
0.019 kg 0.0076 kg 0.004 kg
0.0600 kg 0.049 kg 0.0013 kg 0.015 kg |
| A2416 | Diphenyl Isodecyl Phosphite (DPOP) | 1 kg | 1.Phenol
2.Isodecyl Alcohol |
0.558 kg
0.419 kg |
| A2417 | C-8(3-Hydroxy Naphthalene-2 Carbonyl –(3 Morpholine– Propyl-Amine) | 1 kg | 1.4- (3 Amino Propyl) Morpholine
2.BON Methyl Ester |
0.600 kg
0.841 kg |
| A2418 | Irgaphor Green 1736 1,4 Tetrakis- (2,4-Dimethylpenthyl-3- oxo) 1,4-Tribromo-1,4-(Formyl) Phthalocynate Palladium(II) | 1 kg | 1.2,4- Dimethyl – 3-Pentanol
2.Sodium Hydride (60% dispersion in paraffin) 3.Palladium chloride 4.N-Methyl Formanilide |
1.206 kg
0.415 kg 0.238 kg 1.178 kg |
| A2419 | Irgaphor Green HW 627 (Tetra (2,4 Dimethyl-3- Pentyloxy) Palladium Phthalocyanine) | 1 kg | 1.2,4, Dimethyl-3- Pentanon
2.Sodium Hydride (60% dispersion in paraffin) 3.Palladium Chloride |
1.022 kg
0.352 kg
0.183 kg |
| A2420 | Novasol Yellow G liquid (Solvent Yellow 124) (Dye content 55%) | 1 kg | 1.Vinyl Isobutyl Ether
2.Aromatic Hydro-carbon Solvent C10-C11 (Shellsol AB Aromatic 150) |
0.517 kg
0.562 kg |
| A2421 | Opaque white polyester chip | 1 kg | 1.DMT
2.MEG 3.Barium Sulphate 4.DMIP 5.Antifoam 6.Calcium Acetate 7.Manganese Acetate 8.TPP |
0.819 kg
0.297 kg 0.185 kg 0.014 kg 0.00001 kg 0.0007 kg 0.000125 kg 0.0014 kg |
| A2422 | Black – Centred Board | 1 MT | 1.Wood Pulp
2.Calcium Carbonate Clay 3.Latex (5% concentration) 4.Wet end chemicals Retention Aid, AKD Dimer of Fatty Acid AKD Emulsifier Resin 216, AKD Stabiliser 472 Optical Brightening Agent Cutionic Starch Oxide Starch 5.Coating Chemicals (Carboxy Methyl Cellulose, Lubricant, Insolubilizer, Optical brightening Agent, Dispersant, NaOH, coating starch) 6.Laminating Chemicals (Starch, Carboxy, Methyl Cellulose Insolubilizer) 7.Stretch Film 8.Polykraft paper |
0.992 kg
0.122 kg 0.0114 kg
0.0505 kg
0.0173 kg
0.0196 kg As per packing policy |
| A2423 | Polytetrafluoroethylene Dispension (Emulsion Grade, TFE content 59.5+/-0.5%) | 1 MT | 1.Chloroform
2.Perfluoro-octanic Acid (FC-26) |
4.3 MT
0.0075 MT |
| A2424 | Silicone Polymer RS-103 (Trimethyl Sliyl Vinyl Methyl Polysiloxame) | 1 kg | Residual Polymer Mixture (Average content-95%) | 1.2 kg |
| A2425 | PVC Braided Hoses with Synthetic Yarn (Nylon/Polyester) | 1 kg | 1.PVC Resin
2.Dioctyl Ohthalate 3.PVC Stabilizer 4.Relevant Synthetic Yarn (Nylon/ Polyester) |
0.7 kg
0.250 kg 0.030 kg 0.070 kg |
| N B: 1. The quantity of inputs at S.No. 1,2 & 3 are for PVC compound weight of 933 gms in the export product. For any variation in the PVC compound weight the items at S.No. 1,2 & 3 shall be allowed adopting the following formula:
AXB 933 Where A= Quantity allowed for 933 gm PVC compound B= Weight of PVC compound in the export product Note: 2 The quantity of relevant Synthetic yarn at S. No. 4 is for 67 gm of yarn in the export product. For any variation in the relevant yarn weight, the relevant yarn shall be allowed adopting the following formula:- CXD 67 Where C= Quantity allowed for 67 gm yarn content in the export product D= Weight of relevant Synthetic yarn in the export product |
||||
| A2426 | Glyphosate 41% W/WSL | 1 kg | 1.Isopropyl Amine Salt of Glyphosate Tech. (62%)
2.Surfactant (Inert Polyoxyethylene) |
0.668 kg
0.150 kg |
| A2427 | 1-Ethyl-6Hydroxy 4-Methyl-2Pyridine 3-Carbonylamide | 1 kg | 1.Ethyl Cyanoacetate
2.Mono ethyl Amine 3.Methyl Aceto acetate |
0.688 kg
0.315 kg 0.692 kg |
| A2428 | Nylon 6/66 Co-polymer mono-filament yarn (soft grade) | 1 kg | 1.Nylon 6/66 Copolymer Chips
2.Antioxidant 3.Surface Active Agent 4.Finish Oil 5.Relevant PP/PS granules for bobbins |
1.05kg/kg
0.002 kg 0.001 kg 0.001 kg 1.05 kg/kg content in the export product |
| Note: For the export of Nylon 6/66 co-polymer mono-filament yarn (soft grade) upto 500 mtrs length in smaller disposable bobbins/ coils, nylon 6/66 co-polymer chips shall be allowed at the rate of 1.08 kg/kg instead of 1.05 kg/kg in the export product. | ||||
Annexure “C” to the
Public Notice No.9
Dated: 01/05/2000
ENGINEERING PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty Allowed | ||||||||||||
| C1522 | Pneumatic Tool- Balancer with balance Capacity above 75 1b (34.1 kg) upto and including 210 1b (95.5 kg). | 1 No. | 1.Relevent Bearing Ball
2.Relevant Gear Worm 3.Relevant Shaft-worm gear 4.Relevant Retainer ball (thrust) 5.Relevant Race Retainer 6.Relevant Ball Race 7.Relevant Worm 8.Relevant Ball Bearing 9.Relevant Guide Plate 10.Relevant Stop Shield 11.Relevant Housing Cable drum 12.Relevant Stop Assembly 13.Relevant Hook Assembly Swivel 14.Relevant Housing- cover 15.Relevant Cover 16.Relevant Hub-main spring |
1 No.
1 No 1 No. 1 No.
1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No.
1 No. 1 No. 1 No. 1 No. 2 Nos. |
||||||||||||
| 17.Relevant Assembly Main Spring and retainer
18.Relevant Hook 19.Relevant Cable 20.Relevant Clamp cable 21.Relevant Separator plate 22.Relevant Housing cable drum 23.Relevant Main spring anchor |
2 Nos.
1 No. 1 No. 1 No. 1 No. 1 No. 1 No. |
|||||||||||||||
| Note: The import of components shall be allowed on net to net basis with accountability clause. | ||||||||||||||||
| C1523 | Pneumatic Tool- Clay Digger/Utility Hammer (picks) Latch Retainer with Chuck 7/8″hex x 3 ¼” (22.2 mm x 82.6 mm) without muffler. | 1 No. | 1.Relevant Cylinder
2.Relevant Sleeve 3.Relevant Retainer Latch 4.Relevant Latch Bushing 5.Relevant Handle & Bush Assembly 6.Relevant Lever Chit 7.Relevant Lever Pin 8.Relevant Throttle Valve 9.Relevant Retainer Latch Pin 10.Relevant Valve 11.Relevant Piston 12.Relevant Upper valve case Lid 13.Relevant Lower Valve case Lid |
1 No.
1 No. 1 No. 1 No. 1 No.
1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. |
||||||||||||
| 14.Relevant Valve Case
15.Relevant Back Head Bolt |
1 No.
2 Nos. |
|||||||||||||||
| Note: The import of components shall be allowed on net to net basis with accountability clause. | ||||||||||||||||
| C1524 | Pneumatic Tool- Clay Digger/ Utility Hammer (picks) Latch Retainer with Chuck 7/8″hex x 3 ¼” (22.2 mm x 82.6 mm) with muffler. | 1 No. | 1.Relevant Cylinder
2.Relevant Sleeve 3.Relevant Retainer Latch 4.Relevant Latch Bushing 5.Relevant Handle & Bush Assembly 6.Relevant Lever Chit 7.Relevant Lever Pin 8.Relevant Throttle Valve 9.Relevant Retainer Latch Pin 10.Relevant Valve 11.Relevant Piston 12.Relevant Upper valve case Lid 13.Relevant Lower Valve case Lid |
1 No.
1 No. 1 No. 1 No. 1 No.
1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. |
||||||||||||
| 14.Relevant Valve Case
15.Relevant Back Head Bolt 16.Relevant Hood-Muffler complete |
1 No.
2 Nos. 1 No. |
|||||||||||||||
| Note: The import of components shall be allowed on net to net basis with accountability clause. | ||||||||||||||||
| C1525 | Pneumatic Tool Balancer with balance capacity upto 75 lb (34.1 kg) | 1No. | 1.Relevent Main Spring Anchor
2.Relevent Bearing Ball 3.Relevent Drum cable Assembly 4.Relevent Gear worm 5.Relevent Shaft worm gear 6.Relevent Retainer ball(Thrust) 7.Relevent Race Retainer 8.Relevent Ball race 9.Relevent worm 10.Relevent ball bearing 11.Relevent Guide plate 12.Relevent stop shield 13.Relevent Housing cable drum 14.Relevent stop assembly 15.Relevent Hook Assembly Swivel 16.Relevent cover 17.Relevent Hub main spring 18.Relevent Assembly main spring and retainer 19.Relevent hook 20.Relevent cable 21.Relevent Clamp cable 22.Relevent Latch |
1 No.
1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 2 Nos. 1 No. 1 No.
1 No. 1 No.
1 No. |
||||||||||||
| Note: The import of components shall be allowed on net to net basis with accountability clause. | ||||||||||||||||
| C1526 | Pneumatic Tool Reversible Drill with the speed of 350 R.P.M. and above upto and including 750 R.P.M. | 1 No. | 1.Relevent Air Handle Cap
2.Relevent Valve 3.Relevent Live air Handle sleeve 4.Relevent Governer plunger 5.Relevent Governer stop pin 6.Relevent Governer bushing 7.Relevent Governer weight 8.Relevent Governer body 9.Relevent Governer pin 10.Relevent Reverse sleeve 11.Relevent ball bearing 12.Relevent dead handle 13.Relevent Universal Joint 14.Relevent round plug 15.Relevent end plate 16.Relevent ball bearing 17.Relevent Liner 18.Relevent rotor 19.Relevent spindle collar 20.Relevent end plate 21.Relevent spindle gear 22.relevent gear case 23.Relevent collar 24.Relevent gear pinion 25.Relevent ball bearing 26.Relevent sleeve 27.Relevent oil regulating plug 28.Relevent dowel 29.Relevent muffler cover 30.Relevent feed post 31.Relevent bearing 32.Relevent feed sleeve handle 33.Relevent transfer plate 34.Relevent cylinder cap 35.Relevent spindle 36.Relevent feed sleeve centre 37.Relevent feed sleeve 38.Relevent socket shank 39.Relevent dowel 40.Relevent cylinder & bushing assembly 41.Relevent live air handle stem & bush |
1 No.
1 No. 1 No.
1 No.
1 No. 1 No.
2 Nos.
1 No. 1 No. 1 No.
2 Nos. 1 No. 1 No.
1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 2 Nos. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No.
1 No. 1 No.
1 No. 1 No. 1 No. 3 Nos. 1 No.
1 No. |
||||||||||||
| C1527 | Pneumatic Tool- Non Reversible Drill with the speed of 350 RPM and above upto and including 750 RPM. | 1 No. | 1.Relevant Cap
2.Relevant Valve 3.Relevant Live Air handle sleeve 4.Relevant Adaptor Flange 5.Relevant Governor bushing 6.Relevant Governor weight 7.Relevant Governor body 8.Relevant Governor pin 9.Relevant cylinder 10.Relevant Ball Bearing 11.Relevant Dead Handle 12.Relevant End Plate 13.Relevant Ball Bearing 14.Relevant throttle roller protector 15.Relevant Cylinder liner 16.Relevant Rotor 17.Relevant Spindle collar 18.Relevant end plate 19.Relevant Spindle gear 20.Relevant Gear case 21.Relevant Collar 22.Relevant Gear Pinion 23.Relevant Ball Bearing |
1 No.
1 No. 1 No.
1 No. 1 No.
2 Nos. 1 No. 1 No. 1 No. 1 No. 2 Nos. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No 2 Nos. |
||
| 24.Relevant Spindle
25.Relevant Bearing 26.Relevant Transfer Plate 27.Relevant Cylinder cap 28.Relevant Governor Stop Pin 29.Relevant G Plunger 30.Relevant Dowel 31.Relevant Dowel 32.Relevant Stem & Bushing Assembly |
1 No.
1 No. 1 No. 1 No. 1 No.
1 No. 3 Nos. 1 No. 1 No. |
|||||
| Note: The import of components shall be allowed on net to net basis with accountability clause. | ||||||
| C1528 | Pneumatic Tool- Reversible Drill with the speed above 100 RPM upto and including 350 RPM. | . | 1.Relevant Centre
2.Relevant Bushing 3.Relevant end plate 4.Relevant Feed Post 5.Relevant Rotor 6.Relevant Liner 7.Relevant rotor housing assembly 8.Relevant Plate 9.Relevant Ball Bearing 10.Relevant spindle gear 11.Relevant Gear case assembly 12.Relevant throttle valve 13.Relevant end Plate 14.Relevant Gear Stud 15.Relevant Ball Bearing |
1 No.
1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No.
1 No. 1 No.
1 No. 1 No. 1 No. |
||
| 16.Relevant Valve cage
17.Relevant Valve pin 18.Relevant Bearing clamp nut 19.Relevant Governor Lever 20.Relevant Governor body 21.Relevant Governor push pin 22.Relevant Ball Bearing 23.Relevant Nut 24.Relevant Governor weight 25.Relevant Muffler 26.Relevant Transfer Plate 27.Relevant Collar 28.Relevant roller race 29.Relevant roller bearing assembly 30.Relevant Retainer washer 31.Relevant packing nut 32.Relevant extractor pin 33.Relevant gear pinion 34.Relevant internal gear 35.Relevant internal gear 36.Relevant Ball Bearing 37.Relevant Ball Bearing 38.Relevant Dead handle 39.Relevant live air handle stem assembly |
1 No.
1 No. 1 No.
1 No. 1 No.
1 No. 1 No.
1 No. 2 Nos.
1 No. 1 No. 1 No. 1 No. 1 No. 2 Nos. 1 No. 1 No. 1 No. 1 No. 1 No. 2 Nos. 3 Nos. 1 No. 1 No. |
|||||
| 40.Relevant Sleeve
41.Relevant set screw 42.Relevant throttle valve 43.Relevant throttle cap 44.Relevant seat 45.Relevant universal joint 46.Relevant sleeve 47.Relevant retainer sleeve 48.Relevant protection sleeve |
1 No.
1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. |
|||||
| 49.Relevant throttle valve plate
50.Relevant ball bearing 51.Relevant cylinder cap 52.Relevant Feed sleeve handle 53.Relevant Screw 54.Relevant Spindle 55.Relevant Bearing spacer 56.Relevant Dowel |
1 No.
1 No. 1 No. 1 No. 1 No. 1 No. 1 No.
2 Nos. |
|||||
| Note: The import of component shall be allowed on net to net basis with accountability clause. | ||||||
| C1529 | Pneumatic Tool- Reversible Drill with the speed upto 100 R.P.M. | 1 No. | 1.Relevant Centre
2.Relevant Bushing 3.Relevant end plate 4.Relevant Feed Post 5.Relevant Rotor 6.Relevant Liner 7.Relevant Rotor housing assembly 8.Relevant Dead Handle 9.Relevant Plate 10.Relevent Ball Bearing 11.Relevent throttle valve 12.Relevent end plate 13.Relevent gear stud 14.Relevent ball bearing 15.Relevent nut 16.Relevent muffler 17.Relevent protection sleeve 18.Relevent governer lever 19.Relevent governer push pin 20.Relevent ball bearing 21.Relevent nut 22.Relevent Muffler 23.Relevent protection sleeve 24.Relevent throttle cap 25.Relevent roller bearing assembly 26.Relevent packing nut 27.Relevent ball bearing 28.Relevent ball bearing 29.Relevent transfer plate 30.Relevent cylinder cap 31.Relevent feed sleeve handle 32.Relevent throttle valve 33.Relevent screw 34.Relevent roller race 35.Relevent retainer washer 36.Relevant throttle valve plate 37.Relevant seat 38.Relevant Collar 39.Relevant sleeve 40.Relevant Retainer sleeve 41.Relevant sleeve 42.Relevant Universal Joint 43.Relevant Extractor Pin 44.Relevant Governor Body 45.Relevant Spindle 46.Relevant Bearing spacer 47.Relevant Internal gear 48.Relevant gear pinion 49.Relevant internal gear 50.Relevant spindle gear 51.Relevant Governor weight 52.Relevant set screw 53.Relevant Dowel 54.Relevant Live air handle stem assembly 55.Relevent gear case assembly 56.Relevent ball bearing |
1 No.
1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No.
1 No. 1 No.
1 No. 1 No.
1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No.
1 No. 1 No. 1 No. 2 Nos. 1 No.
1 No. 1 No. 1 No. 1 No.
1 No. 1 No. 1 No. 1 No.
1 No. 1 No.
1 No. 1 No. 1 No. 1 No. 4 Nos. 1 No. 2 Nos.
1 No. 1 No.
2 Nos. |
||
Note : The import of components shall be allowed on net to net basis with accountability clause.
| C1530 | Movements for Electrical Measuring Instruments type: Moving iron, Moving Coil, Dynamo Meter, Bimetallic Reed Type, Namely Volt Meter, Ammeter, Frequency Meter WATT meter, multimeters Insulation testers, Maximum Demand Indicator, Power factor meter. | 1 No. | 1.Plastic Moulding Powder:
a.ABS b.Polycarbonate c.Polyphenylene Oxide d.Polyacetal e.Polycarbonate f.Polyamide g.Phenol Formaldehyde (Bakelite) Power and Moulded components thereof 2.Silicon Oils 3.Industrial Jewels with screws 4.Pivots 5.Hair Springs 6.Super Enamelled Copper wire 7.Duralumin Rods Free Cutting Aluminium Rods, Capillary Tubes:
|
50 gms
Net+5% wastage
1 gm 2 Nos. 2 Nos. Net to net Net to net
Net+2% wastage
|
|
| 8.Magnet Centre Core
9.Coil former 10.Mumetals Permalloy strips & components thereof 11.Pointers/Pointer Arms 12.Tant Bands/ Ligaments 13.Barllium Copper/ Phospher/Bronze strips
14.Aluminum Die Castings 15.Bimetallic Springs 16.Springs Steel Strips 17.Transistors, Capacitors, IC’s & other electronic Components not covered by Other input entries 18.Yoke 19.Hybride Circuits 20.Zener Diodes 21.Yoke Holder 22.Lower Boss/under Boss |
Net to net
1 No. Net to net
Net to net Net to net
Net+5% wastage (Qty restricted to 20 gms) Net to net 2 Nos. Net to net Net to net
1 No. 1 No. 2 Nos. 1 No. 1 No. |
||||
Annexure “D” to the
Public Notice No.9
Dated: 01/05/2000
LEATHER PRODUCTS
| Sl.No. | Export Item | Qty. | Import Item | Qty Allowed |
| G47 | Finished Leather Sofa Cover (Stitched) | 1000 Sq. ft. | 1.Relevant lining
2.Polyester wading
3.Zippers
4.Velcro 5.Runner (slider)
6.Relevant double fused tape |
1.05 sq.mtr./ sq. mtr content in the export product
1.05 sq.mtr./ sq. mtr content in the export product Net + 1% wastage Net + 2% wastage Net + 1% wastage Net + 1 % wastage |
| Note: 1. The items thread and needle shall not be allowed
2. The norms for the chemical items are to be allowed as per SION G-7 of furnished Leather. |
||||
Annexure “E” to the
Public Notice No.9
Dated: 01/05/2000
TEXTILE PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty Allowed |
| J312 | Wool/Silk blended Shawls/Scarves/Mufflers and made-ups | kg | 1.Scoured wool
OR Wool Top
OR Wool Yarn
1.Spun Silk Yarn |
1.31 kg/kg content in the export product
1.21 kg/kg content in the export product
1.10 kg/kg content in the export product 1.05 kg/kg content in the export product |
