( TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY

PART-I-SECTION-I)

GOVERNMENT OF INDIA

MINISTRY OF COMMERCE & INDSUTRY

PUBLIC NOTICE NO. 52 (RE-03 )/2002-2007

NEW DELHI; DATED: 26th FEBRUARY, 2004

In exercise of the powers conferred under paragraph 2.4 of the Export and Import Policy, 2002-2007 and paragraph 1.1 of Handbook of Procedures ( Vol.I), the Director General of Foreign Trade hereby makes the following amendment/correction in the Schedule of DEPB rate.

I. The following corrections are made to the Schedule of DEPB rate published vide Public Notice No.47 (RE 2003)/2002-2007 dated 9th February, 2004 and these corrections are effective from 9thFebruary, 2004.

Product Group: Engineering Product Code:61

(i) (i) All the DEPB rates relating to Engineering Products notified vide Public Notice

No.47 (RE-2003)/2002-2007 dated 9th February, 2004, are substituted as Annexed to this Public Notice.

Product Group: Chemicals Product Code:62

(i) (i) The DEPB rate of Sl. No.326 is corrected to read as 9%.

(ii) (ii) The DEPB rate of Sl. No.464 is corrected to read as 6%.

(iii) (iii) The DEPB rate of Sl. No.871 is corrected to read as 5%.

Product Group: Plastics Product Code:63

(i) (i) The DEPB rate of Sl. No.2 is corrected to read as 11%.

(ii) (ii) The DEPB rate of each of Sl. Nos.33A, 33B, 33C, 33D, 33E & 33F is corrected to read as 12%.

Product Group: Leather Product Code:64

(i) (i) The DEPB rate of each of the Sl. Nos.6,9,12,13 is corrected to read as 7%.

(ii) (ii) The DEPB rates of Sl. No.24 is corrected to read as 10%.

Product Group: Textiles Product Code:89

(i) (i) The description of the export product at Sl.No.34A is corrected to read as “Woven Shawls/Scarves/Mufflers and Made-ups made of 100% Wool with or without embroidery”.

(ii) (ii) The description of the export product at Sl.No.44A is corrected to read as “ Bleached/Dyed and/or printed

manmade-cotton blended fabrics ‘with or without embroidery’ and/or ‘with or without metallised yarn’ (manmade content more than 50% by weight)”.

(iii) (iii) The description of the export product at Sl. No.44C is corrected to read as “ Bleached/Dyed and/or Printed Polyester- Cotton Blended Made-ups ( with or without embroidery and/or with or without metallised yarn

( Polyester content more than 50% by weight.)”.

II. The DEPB rate of 13% of Sl. No. 353 of Product Group Engineering (Code No 61) notified vide Public Notice No.46 (RE-03)/2002-2007 dated 4th February, 2004 is corrected to read as 20% with effect from 01.04.2003 till 08.02.2004.

III. The following amendments are made to the Schedule of DEPB rate published vide Public Notice No.47 (RE 2003)/2002-2007 dated 9th February, 2004 :-

Product Group: Engineering Product Code:61

(i) (i) The DEPB rate and value cap of Sl.No.410 is amended to read as 13% and Rs.75/- per Kg. respectively.

(ii) (ii) The DEPB rate and value cap of Sl.No.411 is amended to read as 11% and Rs.70/- per Kg. respectively.

(iii) (iii) The DEPB rate and value cap of Sl.No.412 is amended to read as 11% and Rs.185/- per Kg. respectively.

(iv) (iv) The DEPB rate and value cap of Sl.No.530 is amended to read as 13% and

Rs.175/- per Kg. respectively

.

This issues in the public interest.

( L. MANSINGH )

DIRECTOR GENERAL OF FOREIGN TRADE

Annexure to

Public Notice No.52(RE03/2002-2007

dated 26th February, 2004

PRODUCT GROUP : ENGINEERING

PRODUCT CODE : 61
Sr.No.
Export Product
Rounded Off Rates
Value Cap
1
2
3
4
1
All Aluminium Conductors (AAC) bare
9
2
Aluminium Conductors Steel Re-inforced (ACSR)
9
3
Aluminium conduit bodies made of Aluminium and other alloying constituents
7
4
Aluminium Flexible Tubing
7
5
Deleted
0
6
Table, Kitchen and other Household Articles made of Aluminium with or without handle, irrespective of what material the handle may have been made of
7
7
Extruded aluminium products including pipe and tubes
7
8
Cast articles including parts/components of Aluminium
7
Rs.125/Kg
9
Rolled Aluminium plates, sheets, strips including corrugated Aluminium sheets/strips
7
10
11 KV Heat shrinkable Dry type indoor termination for Switch gear with line in Boot for XLPE cable 240 mm sq.
11
11
11 KV Heat shrinkable Dry Type outdoor termination for XLPE cable size 3 X 185 mm. sq.
11
12
11 KV Heat shrinkable Dry Type outdoor termination for XLPE cable size 3 X 95 mm. sq.
11
13
600/1000 V Heat shrinkable straight joints for cable size 4 X 240 mm. sq
11
14
600/1000 V Heat shrinkable straight joints for cable size 4 X 185 mm. sq.
11
15
600/1000 V Heat shrinkable straight joints for cable size 4 X 120 mm. sq.
11
16
600/1000 V Heat shrinkable straight joints for cable size 4 X 70 mm. sq.
11
17
600/1000 V Heat shrinkable straight joints for cable size 4 X 16 mm. sq.
11
18
600/1000 V Outdoor overhead termination complete with cable lugs & Armour clamping ring for 4 core copper cable 4×120 Sq.mm
11
19
Electrical Wiring Accessories/Components wholly made of Brass
10
Rs.240/Kg.
20
Complete ceiling fan with metal blades (36″/42”/48”/56”/60”)
5
21
Electric Pedestal Fan
9
22
Electric table fans
9
23
Fluorescent Tubes (18/20 /36/40 Watts)
11
24
Galvanised transmission line towers and parts thereof
10
Rs.45/Kg.
25
GLS Lamps (upto 100 Watts and below)
11
26
H.P.M.V. Lamps (250 W)
11
27
H.P.S.V Lamps (250 W)
11
28
H.P.S.V Lamps Arc Tube (Burners) (150/250/400 W)
11
29
H4 Halogen Lamps 45/40W to 130/90W (12 V to 24 V)
11
30
Insulation Tube Heat Shrinkable (For sleeve conductor) 16 to 25 mm sq. Copper Conductor.
11
31
Insulation Tube Heat Shrinkable (For sleeve conductor) 70 to 120 mm sq. Copper Conductor
11
32
Insulation Tube Heat Shrinkable (For sleeve conductor) 185 to 240 mm. sq. Copper conductor
11
33
Marine Cable flexible Non Burning (TPR) 4 X 1.5
10
34
Marine Cable flexible Non Burning (TPR) 4 X 2.5
10
35
Marine Cable flexible Non Burning (TPR) 12 X 1.5
10
36
Marine Cable flexible Non Burning (TPR) 3 X 4.00
10
37
Marine Cable flexible Non Burning (TPR) 3 X 6.00
10
38
Marine Cable flexible Non Burning(TPR) 2 x 1.5
10
39
Marine Cable flexible Non Burning(TPR) 3 x 1.5
10
40
Marine Cable Non Burning for Stationary laying (PVC) 2 X 1.5
10
41
Marine Cable Non Burning for Stationary laying (PVC) 2 X 2.5
10
42
Marine Cable Non Burning for Stationary laying (PVC) 3 X 1.5
10
43
Marine Cable Non Burning for Stationary laying (PVC) 3 X 2.5
10
44
Marine Cable Non Burning for Stationary laying (PVC) 3 X 10.00
10
45
Marine Cable Non Burning for Stationary laying (PVC) 3 X 16.00
10
46
Marine Cable Non Burning for Stationary laying (PVC) 3 X 25.00
10
47
Marine Cable Non Burning for Stationary laying (PVC) 3 X 50.00
10
48
Marine Cable Non Burning for Stationary laying (PVC) 3 X 70.00
10
49
Marine Cable Non Burning for Stationary laying (PVC) 3 X 95.00
10
50
Marine Cable Non Burning for Stationary laying (PVC) 7 X 1.5
10
51
Marine Cable Non Burning for Stationary laying (PVC) 12 x 1.5
10
52
Out door Weather proof light fitting with Glass Shell/ Acrylic cover excluding Automotive light fittings.
9
53
Outdoor Over Head Termination Kits complete with Cable Gland and/or Bush PVC Shroud (with or without ring, lock and nut)
10
54
Single Phase Electrical Energy Meter
10
55
11 KV straight through Joints for XLPE Copper Cable size 3 x 95 Sq. mm.
10
56
Starter Motor Armature for High Speed Vehicles Cars etc.
8
57
Stator for Alternator for Heavy Duty (12 Volts 105-190 Amps)
10
58
Stator for Alternator for Medium Duty (12 Volts 95-105 Amps)
10
59
Steel Welding Electrodes
11
60
Thermocouple Cartridges of PT/PT-13% RH (type-R) Mark VII
5
61
Three Phase Electrical Energy Meter
10
62
Tinned/Untinned copper cables lugs /sockets/ connections
10
Rs.260/Kg
63
Tinned/Untinned copper ferules
10
Rs.260/Kg
64
Tinned/Untinned copper terminals ends
10
Rs.260/Kg.
65
Ferrous Automotive Products
3
66A
Nuts/Bolts/screws/washers made of Alloy steel including stainless steel
10
Rs.60/Kg.
66B
Nuts/Bolts/Screws/washers made of Non-alloy Steel
10
Rs.25/Kg
67A
Bright bars made out of Stainless Steel
13
Rs.90/Kg.
67B
Bright bars made out of Mild Steel
10
Rs.30/Kg
67C
Bright bars made out of items other than Stainless Steel and mild steel
10
Rs.35/Kg.
68A
Carbon Steel/ Non Alloy Steel Forgings (Machined)
13
Rs.105/Kg.
68B
Alloy Steel Forgings (Machined)
13
Rs.175/Kg
68C
Stainless steel forgings (Machined)
13
Rs.400/Kg.
69A
Carbon Steel/Non Alloy Steel Forgings (Rough)
13
Rs.85/Kg.
69B
Alloy Steel Forgings (Rough)
13
Rs.125/Kg
69C
Stainless steel forgings (rough)
13
Rs.300/Kg.
70 A
High tensile precision fastners Cold/ Hot forged Bolts/ Screws/Nuts-All varieties of Alloy steel/Stainless steel
8
Rs.60/Kg.
70 B
High tensile precision fastners Cold/ Hot forged Bolts/ Screws/Nuts-All varieties of Non-Alloy steel
8
Rs.25/Kg.
71 A
Hot forged nuts of Alloy Steel including Stainless Steel
10
Rs.60/Kg.
71 B
Hot forged nuts of Non-Alloy Steel
10
Rs.25/Kg.
72
Cast Iron Products (Rough/Machined) (not elsewhere specified)
8
73
Powrah/Hoe/Pickaxe/Kudali/ Pick Mattock/ Cutter Mattock/ Trowel/ Transplantor /Fork/ Cultivator/ Weeder made of Iron and/or steel
9
Rs.40/Kg.
74
Chisels made of forging quality carbon steel
9
75
Drop forged Pliers of Alloy steel/Non-alloy Steel
9
76
Hand Drill
10
77
High Tensile precision Industrial Wrenches made of AISI-8650 (High Tensile)
9
78
Pipe Wrenches
9
79
Punches
9
80
Screw Drivers (Nickel plated)
9
81
Spanners made of alloy/non-alloy steel
9
82
Steel files of Alloy Steel
9
83
Steel files of High Carbon Steel
9
84
Steel Vices
9
85
Cold Rolled Galvanised, Colour coated Non-Alloy steel sheets/ hoops and strips/ wide coils (plain / corrugated)
13
Rs.29000/MT
86
2″ Galvanised flanges with rubber gaskets
10
87
2″ Galvanised/ Zinc Coated Bungs
10
88
2″ Galvanised/Zinc coated Flange
10
89
3/4″ Flanges with or without Washer
10
90
3/4″ Galvanised bungs with rubber gaskets
10
91
3/4″ Galvanised flanges with rubber gaskets
10
92
3/4″ Galvanised Zinc coated Bungs
10
93
3/4″ Galvanised/ Zinc coated Flanges
10
94
Adjustable Bracket made out of MS sheet
10
95
Wood to steel adapter (All Types)
10
96
Aluminium collapsible tubes
7
97
Aluminium Pencil Sharpner
7
98
Aluminium rivets
9
99
Aluminium Utensils with Interior PTFE Coating & Exterior painted (non-stick) with/ without handle.
4
100
Animal Drawn Ploughs/ Parts thereof
9
101
Arm Blade
11
Rs.20/Kg.
102
Aruvil Double Wheel Carrier kit Set
11
103
Axes
9
104
Ball Chain Cap
8
105
Barb Arm
11
106
Barb Arm Base
9
107
Black Pipes/ tubes including precision Tubes
13
Rs.20/Kg.
108
Bottom/Top Plate UM-1 made of Tin Plate
9
109
Box Hinge
12
110
Brace Band
12
111
Brace Rail End
12
112 A
Nuts milled from bar process of Alloy Steel including Stainless Steel
10
Rs.60/Kg.
112 B
Nuts milled from bar process of Non-Alloy Steel
10
Rs.25/Kg.
113
Brass Builder Hardware
7
Rs.325/Kg.
114
Brass Tubes
11
Rs.150/Kg.
115
Brass valves
7
116
Bull Dog Hinge
11
117
Seamless Butt Welded Steel Pipe Fittings made from Seamless/ERW Steel Tube
11
Rs.120/Kg.
118
Cl Cistern
8
119
Cl pipes and Fitting, not elsewhere specified
8
120
Coil Spring / Helical Coil Spring
10
Rs.20/Kg.
121
Collar of M.S. Sheet
13
122
Corner Arm
11
123
Crow Bar /Wrecking Bar
11
Rs.35/Kg.
124
Cultivator made of mild steel
9
125
Cut Hand tacks made of M.S. Sheets
9
126
Decorative Handicrafts/ Artwares made of Anodised Aluminium
4
127
Door/ Window/ ventilator Sections made of mild steel
9
128
Double Carrier Wheel
11
129
Drag Link Chain
10
130
Ductile Iron Spun Pipes
9
131
Electrolytic Tinplate components
6
132
Round/Eliptical /Oval Tin Plate container and/ or components thereof
8
133
Deleted
134
Female Hinge
12
135
Flange Plate
12
136
Floor Flange
9
137
Fork
11
138
Fork digging with socket
10
139
Galvanised non alloy Steel Wire Ropes (wire steel core)
9
140
Galvanised non alloy Steel Wire Ropes (fibre core)
9
141
Galvanised Pipes/ tubes with wall thickness above 3mm to 4mm
13
Rs.20/Kg.
142
Galvanised Pipes/ tubes conforming to ASTM Specification with wall thickness 1mm or below
13
Rs.20/Kg.
143
Galvanised Pipes/ tubes conforming to ASTM Specification with wall thickness above 1mm to 2mm
13
Rs.20/Kg.
144
Galvanised Pipes/ tubes conforming to ASTM Specification with wall thickness above 2mm to 3mm
13
Rs.20/Kg.
145
Galvanised Pipes/ tubes conforming to ASTM Specification with wall thickness above 3mm to 4mm
13
Rs.20/Kg.
146
Galvanised Pipes/ tubes conforming to ASTM Specification with wall thickness above 4mm to 5mm
13
Rs.20/Kg.
147
Galvanised Pipes/ tubes conforming to ASTM specification with wall thickness 5mm and above
13
Rs.20/Kg.
148
Galvanised Pipes/ tubes with wall thickness 1mm or below
13
Rs.20/Kg.
149
Galvanised Pipes/ tubes with wall thickness above 1mm to 2mm
13
Rs.20/Kg.
150
Galvanised Pipes/ tubes with wall thickness above 2mm to 3mm
13
Rs.20/Kg.
151
Galvanised Pipes/ tubes with wall thickness above 4mm to 5mm
13
Rs.20/Kg.
152
Galvanised Pipes/ tubes with wall thickness 5mm and above
13
Rs.20/Kg.
153
Galvanised Steel flexible Tubes/ Pipes (Conduit) in sizes ranging from 1/2″ to 3″
12
Rs.35/Kg.
154
Gate Clip Made of Mild Steel
12
155
Gate Hold Back made of Mild Steel
12
156
Gate Latch Made of Mild Steel
12
157
Gun metal valves
7
158
MS Colour coated ghamla (made of HS Steel)
10
159
Heavy Duty 9 Tons Tillers (Spring loaded without spring cultivator)
3
160
Heavy duty Fork latch
11
161
Deleted
162
Deleted
163
High Chromium Grinding media balls
7
Rs.35/Kg.
164
Hot Dipped Galvanised tension Bar/ Gate Rods/ Truss Rods/ Drop Rods.
9
165
ILD Fork
11
166
ILD Guide
11
167
Industrial Offset Hinge
11
168
Industrial Offset Bracket
11
169
Industrial Locking Device
11
170
J-bracket
11
171
Locks and valves water pipe fitting
9
172
Loop Cap Made of Mild Steel
9
173
LPG Cylinders with valves
9
174
Male Hinge/Male Bracket Made of Mild Steel
11
175
Male Lag Bracket Made of Mild Steel
9
176
Marine freight containers of type ICC 20’x8’x8.5′
13
177
MS Paper pin & Clip
11
Rs.40/Kg.
178
Steel Needle Screws Self colour or Plated
9
179
Nickel Plated M S Buckles
10
180
Offset Rail End
13
181
OTS Cans/ dingeley cans
9
182
Oxygen Cylinder dia 140 NF
11
183
Oxygen Cylinder dia 229 MM
11
184
Deleted
185
Photo frame (Brass)
7
186
Presensitised Positive Offset Aluminium plates
9
187
Pressure Stoves/ kerosene burners/ pressure lamps blow lamps/ pressure lanterns/ fancy light fittings made of brass
7
188
Rail End
13
189
Rakes/Garden Rakes/ Fork Manure Hooks made of Iron and/or Steel
12
190
Rectangular/ Square Tin Plate container and/ or components thereof
8
191
Rectangular/Square Tin Plate container and/or component thereof with round neck.
8
192
Rings, Lid and Tagger Assemblies (with or without matching Bottom Piece)
8
193
Deleted
194
Sanitary and bathroom fittings (of brass)
7
195
Sanitary and bathroom fittings (of gun metal)
7
196
Shovels/Spades made of Iron and/or steel, with or without handle, irrespective of what material the handle may have been made of
10
197
Folding bed made of mild steel
8
198
Sleeve made of Mild steel
13
199
Sleeve Bracket made of mild steel
13
200
Stainless Steel safety razor Blades
7
201
Stainless Steel Vacuum Flask
8
202
Stainless steel wire rope
9
203
Stapler
4
204
Steel Clamp (Galvanised) and ungalvanised-All types
11
205
Mild Steel pegs
10
206
Mild Steel Weld mesh
11
Rs.55/Kg.
207
Mild Steel Stranded wire
11
Rs.26/Kg.
208
Surgical blades other than made of High Carbon Steel
9
209
Surgical Blades made of High Carbon Steel
9
210
Table Pencil Sharpener made of plastics
7
211
Tension Band
11
212
Tiller Left Hand or Right Hand
9
213
Top and Bottom cover of Round Battery Jacket made from Tin plate
4
214
Tower Crane
11
215
Track Wheel
11
216
Twin type shaving system Disposable Razor Blades (one twin blade fixed on a Razor Handle with a protecting cap)/Razor Box (1 Razor Handle + 5 twin blades in a magazine both packed in a plastic box)/ Razor Card(1 Razor Handle + 5 twin blades in a magazine bubbled and fixed on a card)/ Magazine (5 twin blades packed in a magazine)
8
217
Twin type shaving system Razor/ Razor Handle
6
218
Mild steel U-Bolt
10
219
Deleted
220
Mild Steel Universal Bracket
11
221
Valve for LPG Cylinder, Hand wheel type, made of Brass
5
222
Water meters of outer casing made of brass.
5
223
M.S. Wire Nails
9
224
Wood screws made of carbon steel self colour or plated
9
225
Zinc plated (Galvanised) conduit Hanger
10
226
Ball/ Roller /Thrust/ clutch release/ spherical plain Bearing
8
Rs.600/Kg.
227
Bench Grinder 6″
5
228
Brazed Carbide Tools
9
229
Brazed Tools Carbide Tips
9
230
Pneumatic tool
7
231
Cutting Tools of High speed Steel (Cobalt Grade)
5
232
Cutting tools of High Speed Steel (Non-Cobalt Grade)
5
233 A
Casing Pipes conforming to API Specifications 5CT or equivalent of OD 114mm to 508mm (4 to 20)made out of Seamless Steel Pipes
13
Rs.130/Kg.
233 B
Casing Pipes confirming to API Specifications 5CT or equivalent of OD 114mm to 508 mm (4 to 20) made out of ERW Steel Pipes
13
Rs. 40/Kg.
233 C
Tubing/Hollow Drill Rods/Coupling/Core Barrels and substitutes made out of Carbon Steel Seamless Tube/Pipe
13
Rs.130/Kg.
234
Drills/Reamers End Mills/ Broaches Milling cutters incuding Threading Tools/ Taps of High Speed Steel (Non-Cobalt Grade).
8
235
Drills/Reamers End Mills/ Breaches/Milling cutters including Threading Tools/ Taps of High speed (Cobalt Grade)
8
236
Pneumatic Revetting hammer
7
237
Resin bonded diamond wheels
4
238
Saws/ Segments made from high speed steel strips/ sheets
5
239
Front Engined Three Wheeler Drive away Chasis in CKD/SKD/ CBU condition
11
240
Rear Engined Auto Rikshaw in CKD/SKD/CBU condition
11
241
Scooter (in CKD/SKD/CBU condition)
11
242
Motor Cycle (in CKD/SKD/CBU condition)
11
243
Moped (in CKD/SKD/CBU condition)
11
244
Alternator Assembly
9
245
Non-alloy Steel Anchor Pin
11
246
Armature for Delcoremy type motor
10
247
Armature for Dynamo
10
248
Starter Motor Armature for Low Speed Vehicles
7
249
Automobile Tyre-Tube Valves
11
250
BB Axle
11
251
Brake shoe plate
13
252
Cam
10
253
Cam Shaft
10
254
CBH Flate for starter motor
10
255
Commutator
7
256
Cone Sleeve/Axle Stud sleeve
11
257
Connecting Rod
6
258
Cotter pin made of steel of any quality
11
259
Crank for chain wheel
10
260
Crank Shaft (for four wheelers)
10
261
Crank Shaft (for two wheelers)
10
262
Crank-shaft Forgings/ connecting rod forgings
10
263
Deep Well Hand pump complete without connecting Rods with/ without spares & Tools
12
264
Deepwell hand pump with 10 connecting rods.
12
265
Draw bars
10
266
Drive assembly for starter motor
9
267
End-Cap Assembly
8
268
Field Coil for Starter Motor
9
269
Flex Plate Assembly
9
270
Flywheel Starter Ring Gear
9
271
Front Axle beam/I-Beam
11
272
Front/rear axle shaft
11
273
Full Tension Sleeve made of steel
7
274
Deleted
274 A
Galvanised Spokes other than for bi-cycles
11
274 B
Galvanised Spokes for bi-cycles
11
Rs..85/gross
275
Generator (Dynamo) Assembly
10
276
Half Collets for engine valves
8
277
Deleted
278
Steel Hub bolts
9
279
Steel Hub cone
9
280
Ignition Coil oil filled
10
281
Ignition Coil Resin Cost
10
282
Inlet exhaust valves
5
283
Integral Shaft Water Pump bearing for automotive applications
11
284
King pin made out of alloy steel
9
285
Laminated Leaf Springs/Springs
8
286
Light Commercial Vehicle (LCV) of GVW upto 7.5 Mt in CBU/SKD/CKD condition
7
287
Machined trailor ball/hitch pin/linkage pin
10
288
Nozzles made of steel
7
289
Oil Bath Gear case
8
290
Piston Pin/ Gudgeon Pin
7
291
Push rod
9
292
Rear Axle Assembly for LCV/ HCV (Assembly/SKD)
11
293
Rocker Arm/ Rocker Shaft made of steel
10
294
Roller for auto break shoe
11
295
Shallow Well hand pump with PVC riser main pump rod, well screen, Lower casing & upper casing.
9
296
Sleeve Shaft and Ball Joint
7
297
Slip Ring
6
298
Slip Stub Shaft
7
299
Solenoid Switch Pre-engaged type
9
300
Solenoid Switch Co-axial type
9
.
301
Spindles made of steel
7
302
Sprocket with central axle
8
303
Starter motor with maximum current upto 1100 Amps
8
304
Stator for alternator for Light Duty (12 Volts 60-95 Amps)
9
305
Submersible Water pump sets i.e. Pumps, Motors, Pumpsets & Accessories thereof such as cable, control panels & pipes
9
306
Valve Tappets
9
307
Voltage Regulator
5
308
Aluminium Ingots
3
309
Aluminium Sow Ingots
3
310
Aluminium Wire Bar/ Rod
3
311
Brass Washers of all types
7
312
Brass Wood Screw
8
313
Calcined Alumina
7
314
Copper flats/ Sheets/ Strips
8
315
Copper Foils
8
316
Lead Antimony Wire
10
317
Phosphor Bronze fabric
10
318
Pressure die cast article made of zinc
11
Rs.60/Kg.
319
Tin Ingots
2
320
Valve Stems made of brass
5
321
Magnetic assemblies incorporating cast alloy permanent magnets viz. pot magnets, magnetic welding clamps/ links, Magnetic lifting devices,magnetic racks/ vices/ door catches/ vee blocks bases/ hold fast
6
322
Galvanised/ungalvanised spikes for use as Railway Track material
11
323
Gear cutting tools of Cobalt bearing high speed steel
5
324
Industrial Diamond prod. Diamond Grinding wheels/ Diamond file and tools
4
325
Aluminium Pistons, in fully machined conditions
7
326
Ferro Chrome/ Charge Chrome
8
327
Ferro Manganese (Fe Mn)
8
328
Ferro Silicon (Fe Si)
9
329
Cold Rolled Galvanised Non-alloy Steel sheets/Hoops & Strips/ wide coils/ Circles(Plain/ Corrugated)
12
Rs.25500/MT
330
Gas based direct reduced iron (Hot Briquetted Iron/ Sponge Iron)
5
331
Graphite Electrode/ Anode/ Nipples/ Fins/Mix Graphite products/ Graphite/ finco
11
332
High Alumina (Bubble Alumina Based) Bricks & Shapes and/or Castable and Mortars
10
333
High Alumina (Synthetic Base) Bricks/Shapes and/or Ramming Mass, Castables and Mortars
10
334
High Alumina Blast Furnace Stove Bricks/ Shapes and Mortars
10
335
High Alumina Bricks and Shapes and/or Ramming Mass, Castables and Mortars
10
336
High Speed Steel (cobalt grade) bars & rods/ wires/ special profiles/ flat rolled products
11
337
High Speed Steel (Non Cobalt grade) bars & rods/ wires/ special profiles/ flat rolled products
11
338
Magnesia Dolomite Bricks and Shapes and/or Ramming Mass, Castables and Mortars
11
Rs.14000/MT
339
Magnesite Chrome Magnesia Co-clinker Bricks and Shapes and/or Ramming Mass, Castables and Mortars
11
Rs.33000/MT
340
Magnesia Carbon Bricks/Shapes and/or Ramming Mass, Castables and Mortars
11
Rs.21000/MT
341
Non Alloy Steel wire Coated/ Plated or otherwise
11
Rs.30/Kg.
342
Hot rolled Galvanised Non-Alloy Steel Sheets /Hoops and strips/Wide coils (plain/corrugated)
10
343
Non alloy Steel Ingot, Billets, Blooms and slabs
10
344
Alloy Steel Wire coated, plated or otherwise.
10
Rs.35/Kg.
345
Non-Alloy Steel Bars & Rods (including Rounds, Flats, Hexagons, Octagons, Wire Rods, Cold Twisted deformed Bars, Thermo mechanically treated reinforcing Bars ), Angles, Shapes & Sections (including Beams, Joints, Channels, Special Profiles), Rails and Sleepers
10
Rs.25/Kg.
346
Magnesite Bricks and Shapes and/or Ramming Mass, Castables and Mortars
11
Rs.21000/MT
347
Silico Manganese (Si Mn)
8
348
Stainless Steel Wires
11
349
CR Stainless Steel Sheets/ Hoops & Strips/ Wide Coils/Circles with/without annealing/skin passing
12
350
Hot Rolled Non Alloy Steel Plates/Wide Coils/Sheets/Hoops & Strips (including skelp)
12
351
Low Carbon Ferro Chrome (Containing by weight Min 60% Chromium and Max. 1.5% Carbon)
8
352
Ferro Molybdenum (60-65% Molybdenum)
6
353
Table, Kitchen and other household articles made of Stainless Steel with or without handle/lid irrespective of what material the handle/lid may have been made of
13
Rs.135/Kg.
354
Stainless Steel Cutlery with or without handle, irrespective of what material the handle may have been made of
13
Rs.125/Kg.
355
Aluminium artware
6
356
Aluminium Circles/Slugs
7
357
11 KV, Indoor Vacuum circuit Breaker Panels
9
358
CRGO Transformer Lamination (Core Laminations)
11
Rs.40/Kg.
359
11 KV Heat Shrinkable Straight through Joints for XLPE Copper Cable size 3 x 240 sq. mm.
11
360
Cast Iron Wheel
9
361
Cold Rolled painted/ coated High Tensile steel strapping
13
Rs.29/Kg.
362
Ferrous investment & Precision castings
2
363
Manhole Cover
9
364
Sanitary casting
9
365A
(a) Forged Steel ball made of mild steel/non-alloy steel
11
Rs.80/Kg.
365B
(b) Forged Steel ball made of alloy steel
11
Rs.100/Kg.
365C
(c) Forged steel ball made of stainless steel
11
Rs.175/Kg.
366
Thermostatic type bimetal/ trimetal strip of various grades
10
367
Cast Iron Weights
9
368
Cast Iron Vice
9
369
Hacksaw Frame
8
370
Automatic Socks Knitting Machine (Mechanical)
10
371
Computerised Automatic Power Socks Knitting Machine
10
372
Hydraulic End Cap
9
373
Injection moulding machine parts: Deckel /Cover made of non Alloy Steel
9
374
Injection Piston
9
375
Plates Injection cylinder
9
376
Speed Frame Drafting System
7
377
Tail Stocks made of Steel
9
378
Textile Spindle upper part
10
379
Textile spindle with insert
10
380
Thrust housing made of Steel
9
381
Alloy Steel (other than stainless steel) Ingots, Semis (Blooms/Billets/Slabs), Bars and Rods (including Rounds, Flats, Hexagon, Octagon, Wire rods etc)., Angles, Shapes & Sections (including Special Profiles), Plates, Hot Rolled Sheets/Hoops and Strips (including Skelp)/Wide Coils
10
382
Alumina Carbon Bricks/ Shapes and/or Ramming Mass, Castables and Mortars
10
383
Alumina Carbon/ Slide Gate Plate Refractory and Attachments
10
384
Alumina Fused Cast Refractories
10
385
Chrome Magnesite Bricks and Shapes and/or Ramming Mass, Castables and Mortars
11
14000/MT
386
Coal based Direct Reduced Iron (Briquetted Iron/ Sponge Iron)
5
387
Cold Rolled (including Full Hard/Half Hard/Annealed and/or Skin Passed/Temper Passed) Non-Alloy/Alloy Steel (excluding Stainless Steel) Sheets/Hoops and Strips/Wide-Coils, including CRCA
12
DEPB Rate corrected to read as 20% w.e.f. 1/4/2003 till 9.2.2004. Thereafter DEPB rate will be 12%
388
Iron Ore pellets (from Limonite Ore)
4
389
Iron Ore Pellets. (from Haematite Ore)
4
390
Stainless Steel Ingots, Semis (Blooms/Billets/Slabs) Bars and Rods (including Rounds, Flats, Hexagons, Octagons, Wire rods, Cold twisted deformed bars, Thermo-Mechanically Treated Reinforcing Bars) Angles, Shapes and Sections (including Beams, Joints, Channels, Special Profiles), Plates/HR Sheets/Hoops and Strips (including Skelp)/Wide Coil
11
391
Pig Iron/Hot Metal
6
392
Alumina Carbon Continuous Casting Refractories and/or Mortars
10
393
2″ Bungs with or without Washer/Gasket
10
394
2″ Flanges with or without Washer/Gasket
10
395
Bolt Axle made of mild Steel
9
396
Boulevard Clamp made of Steel
11
397
Box Girders for Bridges
9
398
Clevis
11
Rs. 40/Kg.
399A
Hoe Blade
8
399B
Hoe Eye
8
400
Articles manufactured out of GP Sheets not elsewhere specified
9
Rs.30/Kg.
401
Articles manufactured out of Tin Plate prime quality not elsewhere specified
8
402
Postcap
8
403
Rectangular tops made of Electrolytic tin plate fitted with screw neck & handle and bottoms
8
404
Round tops/ ends (bottoms) of containers made of tin plate
8
405
Rubber Wheel made of mild steel
13
406
Mild Steel Scrool
13
407
Vertical Arm made of mild steel
13
Rs.25/Kg.
408
Y Arm Made of mild Steel
13
Rs.25/Kg.
409
Slitting cutters made of mild steel
5
410
Forged Crank Shaft
10
411
Front Axle Beam – Forging
10
412
Forged Crank Shaft Fully Machined (Made Of Alloy/ Non-Alloy Steel)
10
413
Front Axle Beam – Fully Machined
10
414
MS Window, Doors, Ventilators, Grate, Grille, fabricated, frames and Components/ parts thereof
11
Rs.25/Kg.
415
Non Alloy Steel Flanges/ Couplings / Tees/ Elbows
9
416
Seamless Stainless Steel Tubes (Cold Finished)
11
Rs.250/Kg.
417 A
Fully Threaded Rod made of non-alloy steel/ mild steel(Galvanised/Ungalvanised)
12
Rs.20/Kg.
417 B
Fully Threaded Rod made of Alloy Steel including Stainless Steel
12
Rs.90/Kg.
418
PTFE Cables
9
419
Silica Bricks/Shapes For B.F Stoves
9
420
Silica Bricks/Shapes For Coke Ovens
9
421
Silica Mortar
2
422
Stainless steel flanges/ couplings / Tees/ Elbows
11
423
Bicycle Chains
6
424
Manganese Steel Cast Articles (Rough/machined)
9
425
Non Alloy Steel Castings Rough/Machined
7
426
Spheroidal Graphite/ Malleable/ Ductile Iron Castings (Rough/machined)
7
427
Copper Bonded Grounding Rods
9
428
Bearing Races
2
429
Carbon/Non Alloy Steel Seamless Pipes/ Tube (Cold Finish or otherwise)
10
430
Alloy Steel Seamless Pipes/ Tube (Cold Finish or otherwise)
11
Rs.55/Kg.
431
Fabricated Steel Hardware/ Structure/Articles not elsewhere specified Made out of MS HR Plates/ Sheets/ Coils/Strips
7
432
Industrial Roller Chain / Motorcycles including Moped Chain/ Automotive Timing Chains ( all types including spares )
6
433
Industrial Valves (cast or forged body)
4
434
MS Bucket Handles Duly Nickel Plated
8
435
Perforated Construction Stakes (Round/ Flat/ Square)
7
436
Printed Lug Cap With Internal Coating Lined With PVC Compound
4
437
Steel Hinges – Bar Type
7
Rs.20/Kg.
438
Zinc Plated (Galvanised) Steel Lock Nuts (Blanked/Punched) from H.R.Coil/ Sheet
9
Rs.150/Kg.
439
Automotive Water Pump
4
440
Clutch Cover Assembly
4
441
Clutch Plate/Disc Assembly/Driven plate
4
442
Spline Hubs for clutch plate
4
443
Top Link Assembly for Tractors (Consisting of Tommy Bar, Replacement Ball, Replacement end, Centre Tube and Locking Collar) Galvanised
6
444
Tractor Parts – Ratchet Jack Assembly
7
445
Brass Wire
9
446
Stainless Steel rough/machined castings
10
447
Aluminium Foil Commercial Grade Embossed/Non Embossed, Cut to Shape, Pre-formed, with/without Coating, with/without Printing, with/without Reinforcing Material
7
448
Aluminium Foil Paper backed
8
449
Aluminium Foil Plastic Coated/ Laminated
7
450
Aluminium Foil – Synthetic Resin/ Lacquer Coated Printed
7
451
Aluminium Foil – Synthetic Resin/ Lacquer Coated
7
452
9 KV 5 KVA Conventional Surge Arrester Distribution Type With Mounting Breenet And Insulators
10
453
Non-Alloy Ground/ Earthing Rods (Galvanised)
10
454
Stainless Steel Cable Ties made of SS.316 Grade
2
455
Alloy Steel Castings (Rough/Machined)
7
456
Galvanised Steel Wire Strand
9
457
Anchor Bolt With Nut
7
458
Ferro Vanadium
9
459
Magnesium Ferro Silicon
11
460
Cable Ties made of Stainless Steel
2
461
Pilfer proof caps/ Seals –Plain/printed with EP Liner
8
462
Pole Line Hardware fittings and Accessories (Galvanised)
10
463
Carbon steel submerged arc welded pipes as per API grade or ASIM grade or equivalent or hot formed steel bends as per API, ASTM grade or equivalent degree: 0-180 degree
11
Rs.27000/MT
464
Machined /Cold rolled/Cold Formed ring for bearing races, CV cages
9
465
CRCA butt hinges
4
466
CRCA hinges electric brass plated
4
467
CRCA hinges self colour
4
468
CRCA hinges zinc plated
4
469
TEE Hinges (painted/ zinc plated) made of steel
4
470
Transformer (copper wound) above 100 KVA upto and including 400 KVA 3 phased, oil cooled.
9
471
Transformer (copper wound) above 400 KVA upto and including 1600 KVA 3 phased, oil cooled.
9
472
Transformer (copper wound) upto and including 100 KVA 3 phased, oil cooled.
9
473
Carbon steel submerged Arc welded pipes with 3 layer polyethylene coating of 2 mm thickness and having coating weight of 2.75 kgs +/- 5% per Sq.Mtr.
10
Rs.34000/MT
474
Carbon steel submerged Arc welded pipes with 3 layer polyethylene coating of 2.5 mm thickness and having coating weight of 3.15 kgs +/- 5% per Sq.Mtr.
10
Rs.34000/MT
475
Carbon steel submerged Arc welded pipes with 3 layer polyethylene coating of 3 mm thickness and having coating weight of 3.60 kgs +/- 5% per Sq.Mtr.
10
Rs.34000/MT
476
Carbon steel submerged Arc welded pipes with 3 layer polyethylene coating of 3.5 mm thickness and having coating weight of 4.2 kgs +/- 5% per Sq.Mtr.
10
Rs.34000/MT
477
Electrical measuring instrument type: moving iron moving coil dynamo meter bymetallic reed type, namely volt meter, ammeter, frequency meter, watt meter, multimeters, insulation testers, maximum demand indictor power, factor meter
8
478
Electric door bell
8
479
Steel tapes/rules (1 meter to 50 meters)
4
480
Ceramic coated steel pipes with or without coupling
9
481
Cryogenic tanks for liquified gases
6
482
Stainless steel welded and cold drawn tubes/pipes Dia below 450 mm NB
7
483
Hi-chrome casting composition: chromium 30-32%, molybdenum 2.5-3.5%, silicon 1.5 – 2.5%, Carbon 1.5 – 2.5% balance Iron
7
484
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Lead based white Metal Alloy GL-14/SAE-14
3
485
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium Tin Alloy GA-17G/A-17X
3
486
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Alloy GS-30/KS-30/F-14/SAE/ 48/SL
3
487
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Lead based white Metal Alloy GL-15/F-23/L-200/G-24/SAE-15
3
488
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Alloy GS-10/L S-10/G-46/SAE-797/SY/F-100/F-59
3
489
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper Lead Alloy of GS-23/L.S-23/G-48/SAE-799/SX/F-250/F-7
3
490
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Tin Alloy GS-25/KS-25/SAE-49/SP
3
491
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Alloy SL/KS/30/GS/30/F-14/SAE48/SP/KS 25/GS 25/G 41/F 770-780/H 24/F112/SAE 49/SY/F 100/HF 2/LS/F-770/SL/KS 30/GS 30/F-14
3
492
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Alloy F-770/SL/KS30/ GS30/F-14
3
493
Deleted
494
Deleted
495
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium based F-820/F-157/TR-20/GA 20/A 20/G 74/SAE 783/AS 15/GA 17G/A 17X/A6/GA 6/A300/G73/SAE 770-780
3
496
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium Tin BASED ALLOY GA 6/ A6/G 73A 300/SAE 770/ AS11
3
497
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed High Tin Alloy F-780/SP /H24/ GS25 /KS 25/G-41/SAE-49
3
498
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based AlloyF100/SY/HF2/ LS10 /gs10/Glyco-46/SAE/792
3
499
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Alloy F-250/SX/HF 16 orH-116/LS-23/GS-23/ Glyco-48/SAE-792
3
500
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium based Alloy AS-15/F-820/F-157/GA-20/A-20/G-74/TR-20/SAE-783
3
501
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium based Alloy AS-11/GA-6/A-6/G-73/A-300/SAE-770
3
502
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Tin based white metal Alloy L-2/GL-12/W-90/ G-32/B-100/SAE-12
3
503
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Lead Based White Metal Alloy GM-155/GL-13/L-100/F-99/SAE-13
3
504
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium Tin Alloy F-820 or F-157/TR-20/GA-20/A-20/G-74/SAE-783/AS-15/GA-17G/A-17X
3
505
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium Tin Alloy AL-6
3
506
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium Lead Alloy F-66/AL-6M
3
507
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Tin based Babbit Alloy to F-1/GL-12/W-90/G-38/B-100/SAE-12/L-2
3
508
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Lead based Babbit Alloy to F-23/L-200/ GL-13/L-100/F-99/SAE-13/GM-155
3
509
Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Cast Copper based Alloy to F-112/F-77/F-770/G-41
3
510
Metallurgical coke
2
511
Chain wheel
10
512
Multispeed free wheel
8
513
Welded steel pipe
7
514
Bronze impellers for inter stream/ Thrustream pumps all types
3
515
Taper roller bearing
5
516
Sheet metal parts of sewing machine namely Shuttle Race Ring, Shuttle Driven, Face Plate Complete, Slide Plate, Tension for plate, Bobbin Case, Bobbin Winder Complete , Lifter, Thread Take Off Lever
5
517
Cast iron parts for sewing machine namely TT Cam, Shuttle Race complete, Claim Stop Motion, Crank, Needle Clamp, Feed Regulator, Feed Fork, Feed Driven Rock Shaft Crank and Feed Lifting Rock Shaft
1
518
Miscellaneous parts of sewing machine namely Roller for Regulator, Pressure Bar Thumb Screw, Pressure Foot, Feed Cam, Needle Bar Bushing, Linked Body, Stud for Link, Arm Shaft, Head Hinges, Pitman with Rod, Stand Fitting, Pitman Crank with fitting, Shuttle Hook, Centre Small Screw with Nut, Needle Plate, Pressure Bar, Screw and Nut for Feed Fork, Needle Bar, Screw and Nut for C.C Rod, Shuttle Race top spring, O/S Rock shaft
9
Rs. 60/Kg.
519
Domestic Sewing machine with standard accessories/ embroidery sewing machine/ Industrial sewing machine/ overlocking sewing machine with or without cover
3
520
Portable bag closure machine
4
521
Submersible pumps
11
.
522
Non alloy steel forged (machined) hammers upto 10 kgs piece wt. without handle or with handle made of steel /wood/ rubber gripped steel pipe.
8
523
Chain wheel and Crank set
9
524
Triple chainwheel and crank set
9
525
Multi Cylinder Fuel injection Pumps for Diesel Engines
8
526
Single Phase Motor
4
527
Automotive Oil filters/fuel filter/Spin on filters/oil or fuel filter assembly/canister-lub oil filter/air filter
4
528
Aluminium Alloy Billets
3
529
Identifiable ready to use machined parts/components made wholly or predominantly of carbon steel/Non Alloy Steel (not less than 90% by weight) manufactured through forging process, not elsewhere specified.
6
530
Identifiable ready to use machined parts/components made wholly or predominantly of Alloy steel/Stainless Steel (not less than 90% by weight) manufactured through forging process, not elsewhere specified.
6
531
Identifiable ready to use machined parts/components made wholly or predominantly of Iron (not less than 90% by weight) manufactured through Casting process, not elsewhere specified.
5
532
Identifiable ready to use machined parts/components made wholly or predominantly of Carbon steel/Non Alloy Steel (not less than 90% by weight) manufactured through Casting process, not elsewhere specified.
4
533
Identifiable ready to use machined parts/components made wholly or predominantly of Alloy steel(0ther than Stainless Steel) (not less than 90% by weight) manufactured through Casting process, not elsewhere specified.
4
534
Identifiable ready to use machined parts/components made wholly or predominantly of Stainless Steel (not less than 90% by weight) manufactured through casting process, not elsewhere specified.
7
535
Brake Drums made of Alloy Cast Iron
10
536
Single Phase Transformers (Copper Wound) Active Parts of Single Phase Transformers, above 100 KVA, upto and including 1000 KVA.
7
537
Single Phase Transformers (Copper Wound) Active Parts of Single Phase Transformers, above 25 KVA, upto and including 100 KVA.
7
538
Single Phase Transformers (Copper Wound) Active Parts of Single Phase Transformers, upto and including 25 KVA.
7
539
Single Phase Transformers (Copper Wound) Active Parts of Single Phase Transformers, above 1000 KVA, upto and including 4000 KVA.
7
540
Nut and Shaft Assembly for Automobile
5
541
Paper Punches
5
542
Truck & Trailer Wheels
11
543A
(a) Carbon Steel Forged Flanges
10
543B
(b) Alloy Steel including Stainless Steel Forged Flanges
10
544
Electrode holder mainly made of copper or brass
6
545
Staples/ Staples in strips made of wholly galvanised steel wire
6
546
Disc Horn
10
547
Stainless Steel casseroles
4
548
Handle Bar Switch
9
549
Grip for Handle Bar
6
550
Frame and Field Assembly for Automobile Starter Motor upto 1.5 KW
12
551
Rear Axle Housing Assembly for LCV/HCV
10
552
Constant Temperature Baths
4
553
Electric Lamp Caps (Aluminium) / GLS Caps B 22 D and E 27/27 – 1000 pcs
5
554
Earth Moving Wheel having diameter not less than 25″
11
555
Sewing Machine Part – shuttle hook – Mild steel
8
556
Cold Rolled Alloy / Non Alloy Steel Hardened and Tempered Saw Blades
2
557
Electrical Wiring Accessories / Components made of Phosphors Bronze
9
558
Textile Machinery Spare Parts – Perforated Nickel Screen
1
559
PCB Routers
3
560
Electrolytic Tin Plate
13
561
Plastic Extrusion Plant and Machinery
7
562
Automotive Locks other than Ignition Locks
8
Rs.700/Kg.
563A
Automobile Ignition Locks for cars
13
Rs.3000/Kg.
563B
Automobile Ignition Locks for two wheelers
11
Rs.525/Kg.
564
Aluminium Oxide Resin Disc
4
Rs.8/Piece
565
Endless coated Zircon Cloth Belts
9
Rs. 330/sq.mt.
566
Non-Cast Hardware Fittings made of Stainless Steel Rod, Grade 304
7
Rs.350/Kg.
567
FTL Caps
8
Rs.350/Kg.
568
Vetrified Grinding Wheel
5
569
PCB Drills made from Solid Tungsten Carbide Blanks/Rods of Dia 0.2 mm-6.5 mm
8
570
Hypodermic Needle Disposable
4
571
Spheroidal Graphite Quality/Steel quality Alloy IC quality/ICDP quality/High Chrome quality Rolls for Rolling Mills.
10
572
Watch Dials made out of Nickel Silver Brass Strip Published
11
Rs.27/Piece
573
Steel Cops/Pirn/Bobbins
10
Rs.56/Kg.
574
Hermetically Sealed Compressor for Air Conditioners using R-22 refrigerant gas having cooling capacity -K Cal3400 +/- 5% /4790+/-5% /5214+/-5% /6350+/-5% per hour
10
Rs.5000/Piece
575
Agricultural Sprinkler mainly made of Brass
3
576
Earth Moving Wheel components—Gutter Band
11
Rs.80/Kg.
577
Earth moving wheel—-Detachable Flange
9
578
Chrome/Nickel Plated wire wheel for all types of car
9
579
Shock Absorber
6
580
Power take offs/clutches
2
581
Shoulder Bolt made out of CHQ alloy steel/Stainless Steel
4
Rs.800/Kg.
582
Dowell Pin made out of CHQ alloy steel/Stainless Steel
8
Rs. 400/Kg.
583
Single Cylinder Pump for Diesel Engine
9
Rs.1150/Kg.
584
Nickel Screen
1
585
All Aliminium Alloy Conductor
9
586
Auto Parts Double Brake Chamber Type 24 L/S
8
Rs.750/No.
587
Auto Parts Brake Chamber Type-16 L/S, Type-20 L/S, Type 24 L/S, Type 30 L/S, Type 30 S/S
8
Rs. 375/No.
588 adhoc
Hermetically Sealed Compressor for Refrigerators & Commercial Refrigeration Applications using eco-friendly gases.
10
Rs. 1200/Pc. valid for 6 months from the date 4.2.04 applicable to M/s. Tecumseh Products (I) Ltd. & M/s. BPL Compressors Ltd., Hyderabad only
589
Textile Machinery Continuous open with Chainless Mercerising Machine
10
Rs.700000/No.
590
Zinc Concentrates
3
591
Tube Forming Rolls
4
592
Diffuser and parts thereof
5

More Under DGFT

Posted Under

Category : DGFT (3499)
Tags : DGFT Notifications (3442)

Leave a Reply

Your email address will not be published. Required fields are marked *