(TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRA ORDINARY

PART-1-SECTION-1)

GOVERNMENT OF INDIA

MINISTRY OF COMMERCE & INDUSTRY

DEPARTMENT OF COMMERCE

PUBLIC NOTICE NO. 52 (RE- 02)/ 2002-2007

NEW DELHI : DATED : 05/12/2002.

Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.

2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of Foreign Trade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.

3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure “A” to this Public Notice shall be made.

4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-

CHEMICALS AND ALLIED PRODUCTS

After the existing entry at Sr.No.A-3109, new entries at Sr. No. A-3110 to A-3117 shall be added as per Annexure ”B” to this Public Notice.

ENGINEERING PRODUCTS

After the existing entry at Sr.No.C-1825, new entries at Sr.No.C-1826 to C-1841 shall be added as per Annexure ”C” to this Public Notice.

-:2:-

PLASTICS GOODS

After the existing entry at Sr.No.H-512, new entries at Sr. No. H-513 to H-516 shall be added as per Annexure ”D” to this Public Notice.

SPORTS GOODS

After the existing entry at Sr.No.I-41, new entries at Sr. No. I-42 to I-47 shall be added as per Annexure ”E” to this Public Notice.

This issues in public interest.

( L. MANSINGH )

DIRECTOR GENERAL OF FOREIGN TRADE

(R. C. SAINI)

DIRECTOR GENERAL OF FOREIGN TRADE

FOR DIRECTOR GENERAL OF FOREIGN TRADE

:3:-

Annexure “A” to the

Public Notice No. 52

Dated: 05/12/2002

AMENDMENTS/CORRECTIONS

Sr.

No.

Page

No.

Reference Amendments/Corrections
1 2 3 4
1. 147 Chemicals & Allied Products

Sr.No.A1062

The norm covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
A1062 1 Hydroxyethylidene 1:1 Di Phosphoric Acid 60% 1 kg 1. Phosphorous Trichloride

OR

Yellow Phosphorous

Chlorine

2. Acetic Acid Galcial

0.828 kg

0.189 kg

0.654 kg

0.182 kg

2. 156 Chemicals & Allied Products

Sr.No.A1204

The description of import item at Sr. No. 1, (without any change in quantity) shall be amended to read as under:-

“Phenol”

3. 159 Chemicals & Allied Products

Sr.No.A1242

The description of import item at Sr. No. 1, (without any change in quantity) shall be amended to read as under:-

“Denatured Ethyl Alcohol”

4. 169 Chemicals & Allied Products

Sr.No.A1385

The description of export item shall be amended to read as under:-

“Methyl Amino Propyl Amine / 3 Methyl Amino Propyl Amine”

-:4:-

5. 172 Chemicals & Allied Products

Sr.No.A1419

1. The description of export item shall be corrected to read as under:-

“N- (1, 3 Dimethyl Butyl)-N- Phenyl-P- Phenylene Diamine”

2. The description of import item at Sr. No. 1 (without any change in quantity) shall be amended to read as under:-

“Para Amino Diphenyl Amine”

6. 177 Chemicals & Allied Products

Sr.No.A1476

The description of import item Ethyl Alcohol appearing at Sr. No. 2, (without any change in quantity) shall be amended to read as:-

“Denatured Ethyl Alcohol”

7. 191 Chemicals & Allied Products

Sr.No.A1598

The description of export item shall be corrected by the following:-

“Amino Trimethylene Phosphonic Acid (50%strength)”

8. 269 Chemicals & Allied Products

Sr.No.A2111

The description of import item at Sr. No. 1, (without any change in quantity) shall be amended to read as:-

“Refined Naphthalene”

9. 289-290 Chemicals & Allied Products

Sr.No.A2263

The description of import item at Sr. No. 13, (with quantity) shall be amended to read as under:-

“Isopropyl Alcohol/ – 12.37 kg/kg

Ethyl Acetate/Absolute

Alcohol”

10. 312 Chemicals & Allied Products

Sr.No.A2439

The description of import item at Sr. No. 1(a), (without any change in quantity) shall be amended to read as:-

“Denatured Ethyl Alcohol”

-:5:-

11. 332 Chemicals & Allied Products

Sr.No.A2605

The description of export product shall be amended to read as under:-

“Imazethapyr 5% SR (Pursuit 50A)”

12. 340 Chemicals & Allied Products

Sr.No.A2686

The norm covered by this entry shall be re-stored by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
A2686 Dimethyl Amine Hydrochloride 1 kg 1. Methanol 0.868 kg
13. 342 Chemicals & Allied Products

Sr.No.A2699

The description of import item at Sr. No. 1, shall be amended to read as:-

“Refined Naphthalene”

14. 345 Chemicals & Allied Products

Sr.No.A2724

The norm covered by this entry shall be deleted.
15. 367 Chemicals & Allied Products

Sr.No.A2905

The description of export item shall be amended to read as under:-

“2,6 Di-tertiary Butyl Paracresol (Butylated Hydroxy Toluene)”

16. 22 Chemicals & Allied Products

Sr.No.A3095 (notified vide Public Notice No. 46 Dated:06/11/2002)

The description of export item shall be amended to read as under:-

“Sterile Ceftazidime/ Ceftazidime Pentahydrate USP”

-:6:-

17. 479 Engineering Product

Sr.No.C2

The description of import item at Sr. No. 1(a), (with quantity) shall be substituted by the following:-

“OR

1a) Aluminium Ingot/ – 1.04 kg

T Bars/Sows/Billets

OR

a) Aluminium Scrap – 1.05 kg

18. 481-482 Engineering Product

Sr.No.C22

The norm covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
C22 Table, Kitchen & other house hold articles made of aluminium including anodized with or without handle irrespective of what material handle are made of (other than those covered under SION at C-1749 1 kg 1. Aluminium Scrap

2. Aluminium Ingot

3. Aluminium Sheet/ Coils

4. Aluminium Circle

1.22 kg/kg content of Aluminium in export product

1.18 kg/kg content of Aluminium in export product

1.15 kg/kg content of Aluminium in export product

1.07 kg/kg content of Aluminium in export product

-:7:-

19. 541 Engineering Product

Sr.No.C303, C304, C305, C306 & C307

The norms covered by these entries shall be deleted.
20. 572-576 Engineering Product

Sr.No.C446

After the description of import item at Sr. No. 96, the following additional import items (with quantity) shall be added:-

“97.Sensors – Net to net

98.linear Transducer – net to net

/VDO Pressure

Transducer

99. Thrust Ball Bearing – Net to net

Spherical Roller

Bearings, Bush

Bearing, Wheel Flange

Rollers etc.

100.Various Switches – Net to net

such as Rotary

101.Drive such as – Net to net

Converters

102.Non Alloy Round – 1.05 kg/kg

Stock/ Bar content in

Export

Product

103.Steel Pipe – 1.02 kg/kg

content in

Export

Product

104.Hydraulic Cylinder – Net to net

105.Band Heters – Net to net

106.Various Types of – Net to net

Seal Kits

107.PVC Tubing – 1.02 kg/kg

content in

Export

Product

-:8:-

      108.Water Filter-cum- – Net to net

Regulator Assy

109.Cam Follower/ – Net to net

Roller

110.Thread Guide – Net to net

111.S.S. Filter Belts – Net to net

112.Coil – Net to net

113.Encoder/Encoder – Net to net

Cables

114.Flow Meter – Net to net

115.Servo Valve – Net to net

Assembly/ Actuator

116.Various machined – Net to net

Mechanical Parts

117.Control Panels – Net to net

118.Extruder Screw – Net to net

119.Extruder Barrel – Net to net

120.Air Compressor – Net to net

121.Filter Elements/ – Net to net

Suction Filters

122.Pressure Gauge/ – Net to net

Indicator/Oil Gauge

123.’O’ Rings – Net to net

124.Thermo Meters/Bi – Net to net

Metal Thermo Meter

125.Terminal Blocks – Net to net

126.Hose Union – Net to net

127.Universal Elbow/ – Net to net

Joint

128.Accumulator – Net to net

129.Scrapper – Net to net

130.Programmer – Net to net

131.High/Low Pressure – Net to net

Elements

132.MMC Units – Net to net

133.Motor Protection – Net to net

Controller

134.Programmable Logic – Net to net

Controller

-:9:-

21. 579-580 Engineering Product

Sr.No.C459

The description of export item shall be amended to read as under:-

“Alloy Steel (other than Stainless Steel and High speed steel), Bars and Rods (Including Rounds, Flats, Hexagons, Octagon, Wire Rods etc.) Angles, Shapes and sections (including Special Profiles) Plate / Sheets / Strips / Wide Coils / Blooms / Billets / Srabs / Ingots containing 2% or more alloying elements.”

22. 585 Engineering Product

Sr.No.C469

The description of export item shall be amended to read as under:-

“Cold Rolled Galvanised Colour Coated Non-Alloy Steel Sheets / Hoopand Strips / wide coils having zinc coating of 180 gm per Sq.m @ 40 Sq.M per litre Primer, 20 Sq.M per litre as Top Coat and 25 Sq. Mtr. Per litr. as Backer given in Engineering Table 1”

23. 585-586 Engineering Product

Sr.No.C470

The description of export item shall be amended to read as under:-

“Cold Rolled Full Hard / Cold Rolled Close Annealed (without skin passed/ temper passed) Non-Alloy/ Alloy Steel (excluding Stainless Steel ) Sheets/ Hoops & Strips / Wide Coils”

24. 586 Engineering Product

Sr.No.C471

The description of export item shall be amended to read as under:-

“Cold Rolled Close annealed (CRCA) Skin passed / Temper passed (Including Half Hard, Quarter Hard) Non-Alloy / Alloy Steel (excluding Stainless Steel) Sheets/ Hoop & Strips / Wide Coils”

-:10:-

25. 601-603 Engineering Product

Sr.No.C511

The description of export item shall be amended to read as under:-

“Non-alloy / Alloy / Stainless Steel bars and Rods (including Rounds, Flats, Hexagon, Octagon, Wire Rod, Cold twisted deformed bars, thermo-mechanically treated reinforcing bars etc.) Angles, Shapes and sections (including Beams, Joists, Channels Special profiles etc.), Plates / Sheets /Strips/ Wide coil / Blooms / Billets/ Srabs and Ingots”

26. 614-616 Engineering Product

Sr.No.C525

The description of export item shall be amended to read as under:-

“Stainless Steel bars and Rods (including Rounds, Flats Hexagons, Otagons, wire rods, etc.) Angles, Shapes and sections (including beams, Joists, Channels, special profiles, etc.), Plates / Sheets / Strips/ wide coils/ Blooms/ Billets/ Srabs/ Ingots in any condition/ finish whether cast, hot rolled/ cold rolled, forged or cold finished/ cold drawn”

27. 617 Engineering Product

Sr.No.C527

1. the description of import item at Sr. No. 7(a) (without any change in quantity) shall be amended to read as under:-

“7(a). Used / New Plastic / Steel Bobbins / Spools”

2. In the Note No. 1, the words appearing as “below 1 mm only” shall be substituted by the following:-

“below 1.6 mm only”

-:11:-

28. 626 Engineering Product

Sr.No.C601

The description of import item at Sr. No. 1, shall be amended (without any change in quantity) to read as under:-

“Cold Rolled Non-alloy Steel Sheet/Strip/Wire Coils (prime seconds / defectives)”

29. 657 Engineering Product

Sr.No.C829

The Note No. 1, below this entry shall be added:-

“Note: 1. Import of handle may also be allowed on net to net basis with accountability clause where the product is exported alongwith the handle”

30. 838 Engineering Product

Sr.No.C1630

The norm covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
C1630 Galvanised Steel Flexible Tube / Pipe (conduit) with PVC coating 1 kg 1. Low carbon MS defective coils/ Sheets

2. Zinc

3. PVC compound (granules)

1 kg/kg content in the export product

0.025 kg content in the export product

1.05 kg/kg content in the export ptoduct

-:12:-

31. 841 Engineering Product

Sr.No.C1645

The description of import items shall be amended (with quantity) to read as under:-

1. For Export item No. 1

i) Gear Box – 1 No

ii) Front Axle – 1 No.

iii)View for Oil Level – 1 No.

iv ) Plug – 1 No.

v) Distributor Valve – Net to net

and handle

0. For Export Item No. 2

i) Gear Box – 1 No

ii) Front Axle – 1 No.

iii)View for Oil Level – 1 No.

iv ) Plug – 1 No.

v) Distributor Valve – Net to net

and Handle

0. For Export Item No. 3

i) Gear Box – 1 No

ii) Front Axle – 1 No.

iii)View for Oil Level – 1 No.

iv ) Plug – 1 No.

v) Distributor Valve – Net to net

and Handle

vi) Hyd. Motor – 1 No.

vii)Control Valve – 1 No.”

32. 861 Engineering Product

Sr.No.C1698

In the description of import item at Sr. No. 1, the following alternative import items (with quantity) shall be added:-

“OR

“1(a) Aluminium Ingot – 1.10 kg/kg

content in

the export

product

1(b) Relevant alloying – 1.10 kg/kg

elements such as content in

silicon metal, the export

manganese metal, product

magnesium metal etc.”

-:13:-

33. 23 Engineering Product

Sr.No.C1780 (as amended vide Public Notice No.20 Dated:01.07.2002)

The norm covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
C1780 Magnet Retrieving 1 No. 1. Permanent Magnet Strontium Ferrite Grade in demagnetized condition as Component in relevant dimensions

OR

Permanent Magnet

Strontium Ferrite

Grade in demagnetized

condition as Raw

Material

Net to net

1.02 kg/kg content of Magnet in the export product

34. 23 Engineering Product

Sr.No.C1781 (as amended vide Public Notice No.20 Dated:01.07.2002)

The norm covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
C1781 Magnetic Tray 1 No. 1. Permanent Magnet Strontium Ferrite Grade in demagnetized condition as Component in relevant dimensions Net to net

-:14:-

      OR

Permanent Magnet

Strontium Ferrite

Grade in demagnetized

condition as Raw

Material

1.02 kg/kg content of Magnet in the export product
35. 25 Engineering Product

Sr.No.C1786 (amended vide Public Notice No.20 Dated:01.07.2002)

The norm covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
C1786 Steel Rolls for Cold Rolling Mill (2-Hi, 4-Hi, 6-Hi) 1 kg 1. Alloy Tool Steel Round Bar conforming to AISI D3/D2 1.40 kg.
36. v of HBP (VOL-II)

PART-II

GENERAL NOTE FOR FUEL In the “General Note for Fuel” the description of the product group against Sr. No. 9 shall be amended to read as under:-

“9. Non-ferrous basic metals (including down-stream products of aluminium)”

37. 1 (Corrected vide Public Notice No.36 Dated:17/09/2002 ) The word “Raw” appearing in the subject heading and in the first paragraph of the said Public Notice shall be deleted.

-:15:-

Annexure “B” to the

Public Notice No. 52

Dated: 05/12/2002

CHEMICALS AND ALLIED PRODUCTS

Sr.No. Export Item Qty. Import Item Qty. Allowed
A3110 Para Hydroxy Benzo Phenone 1 kg 1. Benzoyl Chloride

2. Phenol

3. Aluminium Chloride (Anhydrous)

4. Dichloro Ethane (Ethylene Dichloride)

5. Caustic Soda Flakes

6. Methanol

1.220 kg

0.940 kg

1.682 kg

4.4 kg

2.00 kg

9.00 kg

A3111 Nipacide C1 15 (Containing Chloro Methyl Isothiozolinone content 1.4% min.) 1 kg 1. Chloro Methyl Isothiozolinone (10.2%) 0.138 kg
A3112 Timber Touch (1-(2,2,6-Trimethyl Cyclohexyl)-Hexan-3-o1) 1 kg 1. Citral (min. Purity 95%)

2. Methyl Propyl Ketone

1.865 kg

1.500 kg

A3113 Ortho Cresol 1 kg 1. Phenol

2. Methanol

0.915 kg

0.312 kg

A3114 Phenyl-Alpha (2 Pyridyl) Acetone Nitrile 1 kg 1. 2 Chloro Pyridine

2. Sodium Hydride

0.78 kg

0.18 kg

A3115 Synthetic tanning agent Ammonium Salt of Phenol, Cresol Sulfonic Acid, Polymerized with urea and formaldehyde (Active content 40.5-41%) 1 kg 1. Phenol

2. Cresol

0.132 kg

0.070 kg

-:16:-

A3116 Venetian Glass Beads Loose, Glass Beads in Strings, Bracelets, Rosaries, Necklaces 1 kg 1. Glass Beads/

Metal Beads

OR

Block Glass /Plain

Glass Rods/

Millifeori Glass

Rods/ Venetian

Glass Rods

1.05 kg/kg content of export

1.03 kg/kg content of export

1.20 kg/kg content of export

 
      2. Metal Locks

3. Metal Findings

4. PVC Coated Steel Wire

1.03 kg/kg content of export

1.03 kg/kg content of export

1.05 kg/kg content of export

 
A3117 Wax Crayons – Containing Paraffin wax not less than 24% and Stearic Acid not less than 74% 1 kg 1. Paraffin Wax

2. Stearic Acid

3. Organic Pigments

0.252 kg

0.740 kg

0.021 kg

-:17:-

Annexure “C” to the

Public Notice No. 52

Dated: 05/12/2002

ENGINEERING PRODUCTS

Sr.No. Export Item Qty. Import Item Qty. Allowed
C1826 LPG Storage Bullets / Tanks 1 No. 1. B.Q. Plates 1.05 kg/kg content in export product
C1827 Kerosene Wick Stove and its parts 1 No. 1. CRCA Non Alloy Steel Sheet

2. Nickel Anode

3. Paper Board for corrugated boxes

1.10 kg/kg content in the export product

0.97% of the weight of components to be nickel plated

As per Packing Policy

C1828 Radiators for transformer made of stainless steel 1 No. 1. Stainless Steel Sheet/Coils 1.05 kg/kg content in the export product
Note : In the case of coated / painted radiator, whether internally or externally coated, relevant coating / painting material may be allowed on actual requirement basis upto to 4% of the FOB value of exports

-:18:-

C1829 Evaporative Air Cooler 1 No. 1. ABS

2. PVC Compound

3. Nitrile Rubber compound

4. Relevant Gear Motor/ Swing Motor

5. Relevant main Motor

6. Relevant Pump Motor

7. Adhesive

8. Cellulose impregnated corrugated paper cartons

1.05 kg/ kg content in the export product

1.05 kg/ kg content in the export product

1.05 kg/ kg content in the export product

1 No.

1 No.

Net to net

Cif value restricted to 1% of the FOB value

1 kg/ kg content in the export product

C1830 Hot Rolled Non-alloy Steel Strips/Srit Coils in pickled and oiled condition 1 kg 1. Hot Rolled Non-alloy Steel Wide Coils in un-pickled and un-oiled condition 1.02 kg
C1831 Aluminium Pressure Cooker 1 No. 1. Aluminium Alloy circles (commercial grade) 1.03 kg/kg content in the export product

-:19:-

C1832 Chrome / Nickle Plated Wire Wheel for all types of card 1 No. 1. HR Sheet for Rim

2. Billets for shell

3. Wire for spokes

4. Nipple wire

5. Nickel

6. Sealant

7. Brightener

8. Plating Chemicals

1.19 kg/kg in the export product

2.5 kg/ kg in the export product

1.07 kg/kg in the export product

1.42 kg/kg in the export product

0.03 kg/No. of the export product

0.03 kg/No. of the export product

0.15 kg/No. of export product

cif value limited upto 3% of the FOB value

C1833 Silane Treated Glass Fabric / Cloth 1 kg 1. Glass Fibre / Glass Filament Yarn

2. Polyvinyl Alcohol

3. Silane

1.10 kg

0.02 kg

0.003 kg

C1834 Telephone Cable of relevant size (pairs) having copper conductor – 0.5 mm dia 1 Km As per Engineering Table No. 9(1)

-:20:-

C1835 Telephone Cable of relevant size (pairs) having copper conductor – 0.65 mm dia 1 Km As per Engineering Table No. 9(2)
C1836 Telephone Cable of relevant size (pairs) having copper conductor – 0.90 mm dia 1 Km As per Engineering Table No. 9(3)
C1837 D. C. Motors 1 No. 1. Relevant Cold Rolled Steel Sheet/ Strip/Wide Coil

2. CRNGO Steel Sheet/ Strip/ Wide Coil

3. Trivolthrem/ Triflixel (Nomex / Polyester Film/ Nomex)

4. Copper Wire (Square) Bar/Rod

5. M.S. Plate

6. Forging

7. Brass Brush Holder

8. Nomex Aramid Paper

9. Bearings 6230 C3/ NU / 230 ECJ/C3

10. Resigiss Banding Tape

11. Name Plates

1.37 kg/kg content in the export product

1.60 kg/kg content in the export product

1 kg/ kg content in the export product

1.05 kg/ kg content in the export product

1.05 kg/kg content in the export product

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

-:21:-

C1838 Master Cylinder Assy. 1 No. 1. Aluminium Alloy Ingot

2. Circlip

3. Seal

4. ‘O’ Ring

5. Plug Protective

6. Plug Protective

7. Plunger Primary

8. Seal

9. Pin

10. Poppet

11. Seal

12. Secondary Plunger

13. Sreeve

14. Spring

15. Seal

16. Spring

17. Retainer

1.12 kg/kg content of Aluminium Alloy in export product

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

C1839 Steel trunks (in CKD and SKD condition), with accessories/ fittings/ hardwares, such as, hasps, staples, corners, handles, Srips, Knobs fittings side flaps and flats 1 kg 1. Carbon Steel / Mild Steel / all seconds grades/ defectives/ cuttings/ prime sheets/ coils/ strips

OR

1. Tin plate waste/ waste

2. Bronze powder

1.25 kg/kg content in the export product

1.25 kg/kg content in the export product

0.070 kg/kg of export product

-:22:-

      3. Suitcase locks, metal fittings including combination locks Net to net with accountability in the export product
C1840 Marsh Geophone Strings consisting of 12 SM-24 Basic Elements 1 No. 1. Basic Element SM-24 12 Nos.
C1841 Marsh Geophone Strings consisting of 12 SM-24 Basic Elements (LD) 1 No. 2. Basic Element SM-24 12 Nos.

 -:23:-

ENGINEERING TABLE – 9 (1)

EXPORT ITEM – TELEPHONE CABLE (LENGTH – ONE KM.) OF RELEVANT SIZE(PAIRS) HAVING COPPER CONDUCTOR – 0.50 MM DIA

Cable size (Pairs)
1200
1000
900
800
600
400
300
200
150
100
70
50
30
20
10
5
Copper conductor Dia(mm)
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
IMPORT ITEMS (WITH QUANTITIES IN Kgs.)
1.Copper
4231.756
3526.463
3173.817
2821.17
2115.878
1410.585
1057.939
705.2926
528.9694
352.6463
246.8524
176.3231
105.7939
70.52926
35.26463
17.63231
2.HDPE
2416.178
2013.482
1812.134
1610.786
1208.089
805.3928
604.0446
402.6964
302.0223
201.3482
140.9437
100.6741
60.40446
40.26964
20.13482
10.06741
3.Filling Jelly
1328.083
1357.929
1187.493
933.1449
720.2243
433.8454
313.3903
284.8938
166.7236
151.3079
98.86314
92.36556
51.88066
56.48608
24.53371
10.83703
4.Flooding jelly
42.95541
40.67055
38.38569
35.41537
30.84564
24.79076
21.36346
18.45026
15.30858
13.2522
10.96734
9.824908
7.540046
6.96883
4.798211
3.341611
5.Poly Foil stock
22.32395
21.13175
19.93955
18.38969
16.00529
12.84596
11.05766
9.537604
7.898328
6.825348
5.633147
5.037047
3.844847
3.546796
2.414206
1.654178
6.Al Foil stock
129.767
122.8368
115.9067
106.8975
93.03721
74.67232
64.2771
55.44117
45.91222
39.67509
32.74494
29.27987
22.34972
20.61718
14.03355
9.615578
7.LDPE
727.1546
690.3367
653.5187
521.7104
457.8926
343.1433
298.9618
238.2735
201.1488
159.5445
134.9992
122.7265
98.18122
92.04489
68.72685
34.5782

-:24:-

ENGINEERING TABLE – 9 (2)

EXPORT ITEM – TELEPHONE CABLE (LENGTH – ONE KM.) OF RELEVANT SIZE(PAIRS) HAVING COPPER

CONDUCTOR – 0.65 MM DIA

Cable size (Pairs)
900
600
400
200
100
70
20
10
Copper conductor Dia(mm)
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
IMPORT ITEMS (WITH QUANTITIES IN Kgs.)
1.Copper
5363.75
3575.833
2383.889
1191.944
595.9722
417.1806
119.1944
59.59722
2.HDPE
2319.531
1546.354
1030.903
515.4514
257.7257
180.408
51.54514
25.77257
3.Filling 4.Jelly
1970.915
1205.986
707.5148
468.8895
279.7171
164.2673
24.78362
8.025579
5.Flooding Jelly
46.38271
37.24326
29.70321
22.27741
16.45101
13.2522
6.397615
4.341239
6.Poly Foil stock
24.11225
19.34345
15.40919
11.53454
8.494428
6.825348
3.248746
2.175766
7.Al Foil stock
140.1622
112.4416
89.57214
67.04916
49.37729
39.67509
18.88465
12.64752
8.LDPE
782.3816
635.1097
441.9382
338.2343
214.6487
159.5445
85.90856
56.33147

-:25:-

ENGINEERING TABLE – 9 (3)

EXPORT ITEM – TELEPHONE CABLE (LENGTH – ONE KM.) OF RELEVANT SIZE(PAIRS)

HAVING COPPER CONDUCTOR – 0.90 MM DIA

Cable size (Pairs)
20
50
30
70
100
200
Copper conductor Dia(mm)
0.9
0.9
0.9
0.9
0.9
0.9
IMPORT ITEMS (WITH QUANTITIES IN Kgs.)
1.Copper
228.5148
571.287
342.7722
799.8018
1142.574
2285.148
2.HDPE
137.4537
343.6343
206.1806
481.088
687.2685
1374.537
3.Filling 4.Jelly
131.6723
260.6243
181.2253
371.0402
510.1027
2494.791
5.Flooding jelly
11.53856
17.25071
13.82342
20.44952
24.21954
42.95541
6.Poly Foil stock
5.931197
8.911699
7.123398
10.58078
12.54791
22.32395
7.Al Foil stock
34.47748
51.80284
41.40762
61.50505
72.93979
129.767
8.LDPE
141.1355
202.4988
165.6808
261.8984
335.7798
727.1546

-:26:-

Annexure “D” to the

Public Notice No. 52

Dated: 05/12/2002

PLASTIC PRODUCTS

H513 HDPE Telecom Duct 1 kg 1. HDPE Resin

2. Silicore

3. Colour Master Batch

4. White Master batch

5. Cord Strap

6. Buckles

7. Polyester Strap

8. Printing Ink

9. Solvent for Ink

1.003 kg

0.037 kg

0.009 kg

0.001 kg

As per packing policy

As per packing policy

As per packing policy

0.04 gms

0.05 gms

H514 Thermoplastic Polyurethane Grade Desmopan 585 U-101 1 MT 1. Polyester Polyol 225 B

2. 1,4 Butane-Diol

3. MDI (Desmodur TPPU 0118 FUSED)

4. Stabaxol

5. Vinyzene S. B. –1 PS

6. Desmopan KA 8551

7. Nacol 18-94

8. Adipic Acid

475.2 kg

160.8 kg

310.20 kg

2.7 kg

2.7 kg

10.00 kg

2.45 kg

109.4 kg

-:27:-

H515 Low Density Polyethylene (LDPE) 1 MT 1. Ethylene

2. Oleamide (Crodamide)

3. Force Feed Lub Oil

4. LPG

5. Propylene

1025 kgs

0.50 kg

1.60 kg

3.5 kg

10 kgs

H516 Hot Melt Adhesive / thermosetting Glue containing 51 + 1% EVA Copolymer, 26 +1% Tackifier and 23 + 1% paraffin/ Sasol Wax 1 kg 1. EVA Copolymer

2. Relevant Tackifier Resin/ Petroleum Hydrocarbon Resin

3. Relevant Paraffin Wax/ Sasol Wax

0.53 kg

0.27 kg

0.24 kg

-:28:-

Annexure “E” to the

Public Notice No. 52

Dated: 05/12/2002

SPORTS GOODS

Sr.No. Export Item Qty. Import Item Qty. Allowed
I42 Cricket Bat size – Full/ Men, Length 22 inch; Breadth 4.2 inch 1 No. 1. Willow cleft Length – 27.5 – 28.5 inch; Breadth – 4-6/8-5 inch; thickness – 1-5/8-1-6/8 inch 1.03 No.
I43 Cricket Bat size – Harrow – Length 21.4 inch; Breadth 4.1 inch 1 No. 1. Willow cleft length – 26-27 inch; Breadth – 4-1/2-4-3/4 inch; Thickness – 1-1/4-1-1/2 inch 1.03 No.
I44 Cricket Bat size 6 of length 21.0 inch; Breadth 4.0 inch 1 No. 1. Willow cleft Length – 26-27 inch; Breadth – 4-1/2 – 4-3/4 inch; Thickness – 1-1/4-1-1/2 inch 1.03 No.
I45 Cricket Bat size 5 of Length 20.4 inch; Breadth 3.7 inch 1 No. 1. Willow cleft length – 26 – 27 inch; Breadth – 4-1/2 – 4-3/4 inch; thickness – 1-1/4 – 1-1/2 inch 1.03 No.
I46 Cricket Bat size 4 of Length 19.4 inch; Breadth 3.6 inch   1. Willow cleft length – 26-27 inch; Breadth – 4-1/2 – 4-3/4 inch; Thickness – 1-1/4-1-1/2 inch 1.03 No.

-:29:-

I47 Cricket Bat size 3 of Length 18.4 inch; Breadth 3.5 inch 1 No. 1. Willow cleft Length – 26-27 inch; Breadth – 4-1/2-4-3/4 inch; Thickness 1-1/4-1-1/2 inch 1.03 No.

Note (common to all sizes of Cricket Bats):-

The cane for handle of cricket bat with a diameter varying from 10 mm to 25 mm may also be imported subject to the condition that the weight of cane is 450 gm (+/-10%). Appropriate handle shall be required in export product.

More Under DGFT

Posted Under

Category : DGFT (3786)
Tags : DGFT Notifications (3707)

Leave a Reply

Your email address will not be published. Required fields are marked *

Featured Posts