(TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY

PART-1-SECTION-1)

GOVERNMENT OF INDIA

MINISTRY OF COMMERCE & INDUSTRY

DEPARTMENT OF COMMERCE

PUBLIC NOTICE NO. 50 (RE- 03)/ 2002-2007

NEW DELHI : DATED : 16/02/2004.

Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.

2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of Foreign Trade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.

3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure “A” to this Public Notice shall be made.

4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-

CHEMICALS AND ALLIED PRODUCTS

After the existing entry at Sr. No.A-3289, new entries at Sr. No. A-3290 to A-3300 shall be added as per Annexure ”B” to this Public Notice.

-:2:-

ENGINEERING PRODUCTS

After the existing entry at Sr.No.C-1935, new entries at Sr.No.C-1936 to C-1948 shall be added as per Annexure “C” to this Public Notice.

FOOD PRODUCTS

After the existing entry at Sr.No.E-112, new entry at Sr.No.E-113 to E-114 shall be added as per Annexure “D” to this Public Notice.

TEXTILE PRODUCTS

After the existing entry at Sr.No.J-357, new entry at Sr.No.J-358 shall be added as per Annexure “E” to this Public Notice.

MISCELLANEOUS PRODUCTS

After the existing entry at Sr.No.K-160, new entries at Sr.No. K-161 to K-163 shall be added as per Annexure “F” to this Public Notice.

5. This issues in public interest.

( L. MANSINGH )

DIRECTOR GENERAL OF FOREIGN TRADE

-:3:-

Annexure “A” to the

Public Notice No. 50

Dated: 16/02/2004

AMENDMENTS/CORRECTIONS

Sr.

No.

Page

No.

Reference Amendments/Corrections
1 2 3 4
1. 157 Chemical & Allied Product

Sr.No.A1215

The norm covered by this entry shall be substituted by the following:-
         
Sr.No. Export Item Qty. Import Item Qty. Allowed
  A1215 N-Oxydiethylene Benzothiazole Sulfernamide (Min. 96%) 1 kg 1.2 Mercapto Benzothiazole

OR

i) Aniline

ii) Carbon Disulphide

iii) Sulphur

2. Morpholine

3. Caustic Soda (Sodium

Hydroxide 100%)

4. Sodium Sulphite

5. Iso Propyl Alcohol

0.717 Kg

0.543 Kg

0.52 Kg

0.20 Kg

0.42 Kg

0.28 Kg

0.040 Kg

0.112 Kg

 
               
2. 161 Chemicals & Allied Products

Sr.No.A1267

The description of import item at Sr. No. 1, (with quantity) shall be amended to read as under:-

“1. Gum Turpentine Oil – 1.42 kg”

(Alpha Pinene)

3. 161 Chemicals & Allied Products

Sr.No.A1268

The description of import item at Sr. No. 1, (with quantity) shall be amended to read as under:-

“1. Gum Turpentine Oil – 1.561 kg”

-:4:-

4. 168 Chemicals & Allied Products

Sr.No.A1368

The description of import item at Sr. No. 1, (with quantity) shall be amended to read as under:-

“1. Alpha Pinene – 1.54 kg”

(Gum Turpentine Oil )

5. 172 Chemical & Allied Product

Sr.No.A1423

The norm covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
A1423 N-Cyclohexyl 2- Benzothiaxole Sulphenamide – Min. 95% (CBS) 1 kg 1.2 Mercapto

Benzothiazole

OR

i.) Aniline

ii) Carbon Disulphide

iii) Sulphur

2. Cyclohexylamine

3. Hydrogen peroxide

(50%)

4.Sodium Hydroxide (100%)

0.645 Kg

0.51 Kg

0.49 Kg

0.2 Kg

0.425 Kg

0.3 Kg

0.23 Kg

                 
6. 249 Chemicals & Allied Products

Sr.No.A1944

1. The description of import item at Sr. No. 1, (with quantity) shall be amended to read as under:-

“1. Cumene – 1.3 kg/kg”

2. After the import item at Sr. No. 2, the following additional import item (with quantity) shall be added:-

“3. Catalyst (of 5% Palladium – 50 mg/kg

on Carbon)

4. Furnace Oil – 0.8 lit/kg”

-:5:-

7. 7 Chemicals & Allied Products

Sr.No.A2010 (notified vide

Public Notice No. 27 Dated:06.10.2003)

The description of import item at Sr. No.9 (without any change in quantity) shall be amended to read as under:-

“Dimethyl Sulphoxide / Dimethyl Formamide”

8. 262 Chemical & Allied Product

Sr.No.A2059

The norm covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
A2059 Metamitron Tech. 98% Min. 1 kg 1. Oxalic Acid

2. Thionyl Chloride

3. Hydrazine Hydrate (80%)

4. Aluminium Chloride Anhydrous (Min. Purity 99.5%)

5. Ethyl Acetate

6. Ethyl Alcohol, denatured

7. Benzene

2.40 kg

1.77 kg

1.25 kg

1.90 kg

1.03 kg

2.53 kg

1.04 kg

9. 304 Chemicals & Allied Products

Sr.No.A2370

The description of export item shall be amended to read as under:-

“Meta Tolyl Isocyanate (MTI)”

-:6:-

10. 19 Chemicals & Allied Products

Sr.No.A3247 (notified vide

Public Notice No. 27 Dated:06.10.2003)

The description of import item at Sr. No.8 (without any change in quantity) shall be amended to read as under:-

“Methanol/ Iso Propyl Alcohol”

11. 572-576 Engineering Product

Sr.No.C446

The description of export item shall be amended to read as under:-

“Plastic Extrusion Plants & Machineries and Allied Equipment: Rigid PVC & HDPE Pipe Plant, Bag Maker Machine, Film Plants such as PP/HM/HDPE/ LD/LLD/PVC Film Plant, Tape Plant, LD Foam film Plant, Extrusion Plant, Single Screw Plant, Mixer, Cooler, PVC Wire & Cable/Spring coating plant with/without caterpillar, Single spindle, torque motor winder with/without dies, three layer plant, waste recycling plant, twin screw pipe plant, pipe corrugator plant, pelletising plant, box strapping, monofilament, fabrilating plant, casing & caping plant, profile making plant, reprocessing/lamination/Vented Extrusion Plant”

12. 652 Engineering Product

Sr.No.C791

1. After the import item at Sr. No. 4, the following additional import item (with quantity) shall be added:-

“5. Billet Radiusing Inserts

6. BTA Heads”

2. The following note is added to below the existing norms:-

“Import of item 5 & 6 together is restricted to a maximum value of 3% of total FOB value”

-:7:-

13. 652 Engineering Product

Sr.No.C794

The quantity permissible in respect of import items at Sr. Nos. 2, 3, 4 & 5 taken together will be “restricted to 4% FOB value of exports” the above correction is made in the norm.
14. 677-680 Engineering Product

Sr.No.C960

The norm covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
C960 Above 95 cc & upto 175 cc 4 Stroke Motorcycle in CKD/ SKD/ CBU Condition 1 No. 1. Cold Rolled Steel Sheets/Strips/Coils in Thickness Between 0.5 Mm to 3.0 Mm.

2. Cold Rolled Coated Steel Sheets/Strips/ Coils in Thickness Betweeen 0.8 Mm to 1.0 Mm.

3. Hot Rolled Steel Sheets/Strips/Coils in Thickness Between 3.0 Mm to 5.0 Mm.

4. Commercial Grade Aluminium Purity Min.99%.

5. Silicon.

6. Copper Cathodes/Wire Bars/Rods.

7. Natural Rubber.

8. Nickel.

9. Polyol.

10. Isocyanate.

11. Butyl Rubber.

12. Relevant Synthetic Rubber (NBR / PBR).

13. Carbon Black.

14. Polyvinyl Chloride (Pvc) Granules.

42.50 kg

5.03 kg

5.891 kg

11.762 kg

1.529 kg

0.263 kg

0.240 kg

0.314 kg

480.00 gm

336.00 gm

453.00 gm

145.75 gm

516.78 gm

801.15 gm

-:8:-

      15. Polypropylene Granules.

16. High Density Polyethylene Granules.

17. Rexine.

18. Paints.

19. Air Filter

20. Auto Light Set

21. Battery.

22. Bearing Race Set.

23. Bearing Set.

24. Boss.

25. Brake Cam Set.

26. Bushing Set.

27. Camshaft Valve.

28. Carburetor Assembly.

29. Catalytic Converter.

30. Chain and Sprocke Set.

31. Change Drum Assembly.

32. Charging Regulator Assembly.

33. Clutch Asly Components.

34. Control Cable Set.

35. Control Lever and Housing Set.

36. Crankshaft Assembly.

37. Cylinder Liner.

38. Decal Set.

39. Disc Brake Components.

40. Filter

583.80 gm

180.60 gm

0.67 Sq.mtr.

3.40 Litre

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

-:9:-

      41. Fork Shift Set.

42. Front Fork.

43. Front Hub Axle.

44. Fuel Tap Assembly.

45. Gear Balancer Wt.

46. Gear Set.

47. Guide Chain/Stopper.

48. Guide Valve.

49. Hardwares.

50. Harness.

51. Horn.

52. Housing Assembly Control.

53. Ignition Coil.

54. Ignitor.

55. Kick Lever Assembly.

56. Kick Shaft Assembly.

57. Lock/Key Set.

58. Magneto.

59. Needle Roller Bearing Set.

60. Nipple Spoke (1 Set = 72 Nos.)

61. Oil Pump Assembly.

62. Oil Seal.

63. Piston Asly (Piston, Rings, Pin).

64. Push Rod.

65. Rear Hub Axle.

66. Rear Shock Absorber (1 Set = 2 Nos.)

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

-:10:-

      67. Rear View Mirror Set (1 Set Of 2 Nos.)

68. Regulator Voltage Assembly.

69. Relay

70. Retainer

71. Retainer Valve Spring.

72. Rocker Arm.

73. Scr, Diodes and other Electronics Components.

74. Screw.

75. Shaft Transmission Input.

76. Shaft Transmission Output.

77. Shift Rod.

78. Spark Plug.

79. Speedometer Assembly.

80. Spoke (1 Set = 36 Nos.)

81. Spring Engine Valve.

82. Starter Clutch Components.

83. Starter Motor.

84. Steel Frame.

85. Suppressor Cap.

86. Tank Cap Assembly.

87. Tyres Set.

88. Valve Intake & Exhaust.

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

-:11:-

      89. Valve Seat (1Set = 2 Nos.).

90. Hot Dies Steel Blocks, High Speed Steel, Inserts, Cutting Tools, Grinding Stones, Adhesives and Sealants, Steel shots

Net to net

Upto 5% of FOB Value of export

15. 699 – 702 Engineering Product

Sr.No.C1033

The norm covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
C1033 Three Wheeler Drive Away Chassis/Freight Carrier Powered by Petrol Engine of 125 cc to 300 CC in CBU/SKD/CKD Condition 1 No. 1. Cold Rolled(Prime) Steel Sheets/Strips/ Coils

2. Coated(Prime) Steel Sheets/Strips/Coils

3. Hot Rolled (Prime) Steel Sheets/Strips/ Coils

4. Alloy Steel Wire

5. Aluminium Alloy Ingots

1.20 kg/kg content in the export product

1.16 kg/kg content in the export product

1.13 kg/kg content in the export product

1.07 kg/kg content in the export product

1.04 kg/kg content in the export product

-:12:-

      6. Seamless Steel Tubes

7. Super Enamelled/ Enamelled Copper Wire

8. Natural Rubber

9. PVC/Artificial Leather Cloth

10. Polyol

11. Isocyanate

12. Butyl Rubber

13. Relevant Synthetic Rubber (NBR/ SBR/ PBR)

14. Carbon Black

15. Poly Vinyl Chloride (PVC) Granules

1.02 kg/kg content in the export product

1.01 kg/kg content in the export product

1.05 kg/kg content in the export product

1.05 Sq.mtr/ Sq.mtr content in the export product

1.05 kg/kg content in the export product

1.05 kg/kg content in the export product

1.05 kg/kg content in the export product

1.05 kg/kg content in the export product

0.40 kg

1.05 kg/kg content in the export product

-:13:-

      16. Polypropylene Granules

17. Paints

18. Nylon Granules

19. Main Shaft Assembly

20. Crank Shaft Assembly

21. Relevant set of gears-1 set each

22. Front Shock Absorber

23. Cylinder Block

24. Carburettor

25. Piston Assembly

26. Bearing (FAG 98305.C3) or Equivalent

27. Bearing (SKF 6204) or Equivalent

28. Bearing (SKF 6301) or Equivalent

29. Bearing (SKF 1203) or Equivalent

30. Bearing (FAG 98205) or Equivalent

31. Bearing (SKF 6004) or Equivalent

32. Bearing (SKF 1838002) or Equivalent Needle bush

1.05 kg/kg content in the export product

1% of the FOB value

1.05 kg/kg content in the export product

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

-:14:-

      33. Speedometer Complete

34. Control Cable Set

35. Rear View Mirror Set

36. Wiring Harness set

37. High Tension Coil

38. Solid State AC Flasher Assembly

39. Auto Switches Set

40. Rotor

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

      41. Automotive lights with bulbs

42. Magnet container assembly /rotor

43. Lock assembly

44. Spark Plug

45. Horn

46. Tool Kit Set

47. Needle Bush

48. Hub Pin Set (1 Set = 2 Nos.)

49. Diodes

50. SCR and other Electronic Components

51. Chain

52. Battery

53. Splined Shaft

54. Hand Brake Drive Complete

55. Chain Adjuster/ Tensioner

56. Terminal Board

57. Ring Nut-Right

58. Lamination Pack Coil

59. Idler

60. Set of Sprocket

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

-:15:-

      61. Complete Clutch Cover shaft

62. Bush with Teeth

63. Trunion

64. Set of Bearing Races

65. Cam

66. Engine Gear

67. Reverse Control Gear

68. Idler Gear Assembly

69. Condenser

70. Wheel Axle Assembly

71. Differential Assembly

72. Brake Lever Assembly

73. Brake System and parts thereof

74. Wiper Motor

75. Upper Attachment

76. Wiper Blade Assembly

77. Wind Shield Glass

78. Torsion Bar

79. Anti Vibration Mounts

80. Catalytic Converter

81. Clutch Gears Cross

82. Clutch Assembly and Parts thereof

83. CNG Cylinder

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

-:16:-

      84. CNG/LPG KIT (excluding Cylinder)

85. Cones

86. Crankcase

87. Crankcase Cover

88. Cross

89. Cylinder Head Casting

90. Fan Cowl

91. Flexible Coupling/ Flange

92. HUB(set of 2)

93. Isolator Vibration

94. Lever GR Stop Control

95. Lever Group for Max Controlling

96. Oil Plug Assembly

97. Regulating Lever Assembly

98. Reverse Motion Shaft

99. Rod Control lever Sub-Assly

100. Screw

101. Set of Rings

102. Set of Seals

103. Set of Spacers

104. Spark Advance Regulator Assly

105. Starter Motor

106. Starting Ring Gear

107. Tappet Cup

108. Thrust Bearing Group

109. Tyre (set of 4 Nos)

110. Valve for Piston Cooling

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

-:17:-

      111. Valve of set

112. Torsion Bar Bearing Assembly

113. Wheel Cylinder

114. Upper Pin

115. Lower Pin

116. Hot Die Steel Blocks

117. High Speed Steel

118. Cutting Tools

119. Inserts

120. Steel Shots

121. Adhesives and Sealants

122. Grinding Stone

Net to net

Net to net

Net to net

Net to net

Net to net

CIF value of item Nos. 116 to 122 taken together restricted to 5% of FOB value

16. 718 – 720 Engineering Product

Sr.No.C1076

The norm covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
C1076 Front/Rear Engine Auto Rickshaw in CKD/ SKD/CBU Condition (125 CC to 200 CC) 1 Nos. 1. Cold Rolled (Prime) Steel Sheets/ Strips/ Coils Defective/ Steel Sheets/ Strips Coils

2. Hot Rolled(Prime) Steel Sheets/Strips Coils

3. Aluminium Alloy Ingots

4. Seamless Steel Tubes

1.20 Kg/Kg content in the export product

1.13 Kg/Kg content in the export product

1.07 Kg/Kg content in the export product

1.02 Kg/Kg content in the export product

-:18:-

      5. Super Enamelled/ Enamelled Copper Wire

6. Natural Rubber

7. Plywood

8. Polyol

9. Isocynate

10. Butyl Rubber

11. Relevant Synthetic Rubber (NBR/ SBR/PBR)

12. Carbon Black

13. Poly Vinyl Chloride (PVC) Granules

14. Polypropylene Granules

1.01 Kg/Kg content in the export product

1.05 Kg/Kg content in the export product

1.05 Sq.Mtr/ Sq.Mtr content in the export product

1.05 Kg/Kg content in the export product

1.05 Kg/Kg content in the export product

1.05 Kg/Kg content in the export product

1.05 Kg/Kg content in the export product

0.40 kg

1.05 Kg/Kg content in the export product

1.05 Kg/Kg content in the export product

-:19:-

      15. Paints

16. PVC/Artificial Leather Cloth

17. Nylon Granules

18. Main Shaft Assembly

19. Crank Shaft Assembly

20. Relevant set of gears – 1 set each

21. Front Shock Absorber

22. Rear Shock Absorber set

23. Cylinder Block

24. Carburettor

25. Piston Assembly

26. Relevant Set of Bearings – 1 set

27. Speedometer

28. Control Cable Set

29. Rear View Mirror Set

30. Wiring Harness set

31. Front Suspension Spring

32. Rear Suspension Spring (1 Set = 2 Nos.)

33. High Tension Coil

34. Solid State AC Flasher Assembly

1% of FOB value

1.05 Sq.Mtr/ Sq.Mtr content in the export product

1.05 Kg/Kg content in the export product

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

-:20:-

      35. Auto Switches Set

36. Rotor

37. Starting Tube

38. Automotive lights with bulbs-1 set.

39. Clutch Bush

40. Wheel Axle Assembly

41. Magnet container assembly/Rotor

42. Lock Assembly

43. Set of Gears

44. Spark Plug

45. Petrol lock Complete

46. Horn

47. Tool Kit Complete

48. Needle Bush (1 Set = 3 Nos.)

49. Silicon Diode Assembly

50. Battery

51. Differential Assembly

52. Pivot Pin Assembly

53. Capacitor

54. Starter Gear

55. Front Brake Drum Assembly

56. Wiper Motor

57. Rear Wheel Axle Assembly

58. Wiper Assembly

59. Complete clutch control shaft

60. Lever Sector Complete

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

-:21:-

      61. Spindle

62. Slider and slider block

63. Propeller Shaft Assembly

64. Trailing Arm Assembly Right & Left (1 Set = 2 Nos.)

65. Side Glass (1 Set= 2 Nos.)

66. Manifold

67. Coir (1 Set = 2 Nos.)

68. Hydraulic Brake Assembly

69. Windshield

70. Starter Motor – 1 No.

71. Cylinder Head Casting – 1No.

72. Flexible Coupling/ Flange-2 Nos.

73. Valve Set-1No.

74. Hub (set of 2) -1 Set

75. Reverse Motion Shaft-1 No.

76. Set of rings-1 Set

77. Set of Seals-1 Set

78. Cones-2 Nos.

79. Starting Ring Gear-1 No.

80. Rod Control Lever Sub-Assy-1 No.

81. Lever Group for Max Controlling-1 No.

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

-:22:-

      82. Regulating Lever Assly-1 No.

83. Lever GR Stop Control-1 No.

84. Spark Advance Regulator Assly.- 1 No.

85. Clutch Gears Cross-1 No.

86. Set of Spacers-1 Set

87. Valve for Piston cooling-1 No.

88. Screw-1 No.

89. Oil Plug Assly-1 No.

90. Anti Vibration Mounts-3 Nos.

91. Cross-1 No.

92. Catalytic Converter-1 No.

93. CNG Cylinder-1 No.

94. CNG/ LPG Kit (Excluding Cylinder)- 1 Set

95. Tyre (Set of 4 nos.)- 1 Set

96. Crankcase-1 No.

97. Crankcase cover-1 No.

98. Isolator Vibration-3 No.

99. Fan Cowl – 1 No.

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

-:23:-

17. 721-724 Engineering Product

Sr.No.C1081

The norm covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
C1081 Above 100cc & upto 175cc Scooter in CKD/ SKD/ CBU Condition 1 No. 1. CRCA Steel Sheets/Strips/Coils.

 

2. Terne/ Zinc Coated Steel Sheets/ Strips/Coils

3. Hot Rolled Steel Sheets/Strips/Coils.

 

4. Seamless Carbon/ Alloy Steel Tubes.

 

OR

Steering Column Assembly.

5. Aluminium Alloy Ingots.

 

6. Super Enamelled/ Enamelled Copper Wire

 

1.30 Kg./Kg. content in the export product

1.20 Kg./Kg. content in the export product

1.20 Kg./Kg. content in the export product

1.05 Kg./Kg. content in the export product

1 No.

1.10 Kg./Kg. content in the export product

1.01 Kg./Kg. content in the export product

-:24:-

      7. Natural Rubber.

 

 

8. Polyol.

 

 

9. Isocyanate.

 

 

10. Butyl Rubber.

 

 

11. Relevant Synthetic Rubber (NBR/ PBR/ SBR)

12. Carbon Black.

13. Nylon Granules.

 

14. Abs Plastic Granules.

 

15. Polypropylene Granules.

 

16. Polyvinyl Chloride (Pvc) Granules

1.05 Kg./Kg. content in the export product

1.05 Kg./Kg. content in the export product

1.05 Kg./Kg. content in the export product

1.05 Kg./Kg. content in the export product

1.05 Kg./Kg. content in the export product

0.1007 gm

1.05 Kg./Kg. content in the export product

1.05 Kg./Kg. content in the export product

1.05 Kg./Kg. content in the export product

1.05 Kg./Kg. content in the export product

-:25:-

      17. PVC/ PU Leather Cloth.

 

18. Paints.

19. Polycarbonate Moulding Powder.

20. Primer

21. Clear Acrylic (Lacquer)

22. 1 K Primer

23. Clear 1K/2K (Lacquer)

24. Desmodur-Pa50/Suprasec 2082.

25. Auto Lamps & Bulbs.

26. Auto Lubricating System (Mix Gear Asly).

27. Battery.

28. Bearing Set.

29. Belt Drive.

30. Brake Drums.

31. Brake Hose Asly.

32. Brake Shoe Set

33. Bush.

34. Carburetor Assembly.

35. Catalytic Converter

36. Clutch Asly

37. Control Cable Assembly.

38. Crankshaft Assembly.

39. Cross.

40. Cylinder Block

1.05 Kg./Kg. content in the export product

1.20 Litre

700.00 gm

1.00 Litre

0.83 Litre

0.40 Litre

0.40 Litre

100.00 gm

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

-:26:-

      41. Disc Brake & Caliper Asly.

42. Drive/Mainshaft Assembly.

43. Electronic Components (Thyristors, Terminals, Capacitor, Diodes, Traicm Resistors, Scr.

44. Front/Rear Blinker.

45. Front Brake Lever.

46. Gasket Set.

47. Gear Shifter Asly.

48. Hand Grips.

49. Horn.

50. Ignition Coil.

51. Inner Movement Assembly/Speedometer Complete

52. Lock & Key Set.

53. Magneto.

54. Master Cyl Asly.

55. Mirrors.

56. Module for Buzzer.

57. Needle Bearing Set.

58. Petrol Cock.

59. Pin, Socket Double Lance Type.

60. Pinion with free Wheel

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

-:27:-

      61. Piston Asly (Piston, Rings, Pin, Circlip).

62. Regulator, Flasher, Beeper, Etc.

63. Reinforcement Plate.

64. Selector Spider.

65. Set of Gears.

66. Set of Oil Seal.

67. Shaft for Free Wheel.

68. Shock Absorber.

69. Single Gear Control System.

70. Spark Plug.

71. Starter Motor.

72. Stickers and Labels.

73. Switches.

74. Tensioner Asly.

75. Tool Kit.

76. Tyres.

77. Valve Air Control.

78. Windshield Beading.

79. Wiring Harness.

80. Hot Dies Steel Blocks, High Speed Steel, Inserts, Cutting Tools, Grinding Stones, Adhesives and Sealants, Steel Shots.

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Upto 5% of FOB value of export

-:28:-

18. 741 Engineering Product

Sr.No.C1175

The description of import item at Sr. No.1, (without any change in quantity) shall be corrected to read as under:-

“Copper tubes Refrigeration quality – Dia ¼” to ½”.”

19. 862 Engineering Product

Sr.No.C1702

The description of export item shall be amended to read as under:-

“Silver Contacts/Silver Alloyed contacts or Wire/Silver Profile contacts/Silver Bimetal Contacts/ Silver Bimetal Profiles / Sheet Contacts/ Silver Contacts on Carrier/ Silver Alloyed Contacts on Carrier/Non-Ferrous Metal contacts”

20. 870 – 872 Engineering Product

Sr.No.C1743

RAW MATERIAL:

After import item at Sr. No. 3, the following additional import items (with quantity) shall be added:-

“4. Butyl Rubber – 1.05 kg/kg

content in the

export product

5. Isocyanate – 1.05 kg/kg

content in the

export product

6. Natural Rubber – 1.05 kg/kg

content in the

export product

7. Polyol – 1.05 kg/kg

content in the

export product

8. Relevant Synthetic – 1.05 kg/kg

Rubber (NBR/ content in the

PBR) export product

9. Relevant Paints – 6.05 Ltrs for

one number of

export product”

-:29:-

21. 16 GENERAL NOTES FOR FOOD PRODUCTS (Notified vide Public Notice No. 27 Dated:06/10/2003) The general note at Sr. No. 2 for Food products shall be substituted by the following:-

“Note:2.The import of Cloves, Cinnamon, Cassia & Clove buds under Advance Licences shall be allowed for the export products as mentioned at Sr. Nos. E-54, E-55, E-56 & E-114 only. Advance Licences for import of Cloves, Cinnamon, Cassia & Clove buds shall be issued with prior import condition.”

22. 20 Plastic Products

Sr.No.H-523 (amended vide Public Notice No. 61 Dated:03.02.2003)

The description of export item shall be amended to read as under:-

“Synthetic Organic Tanning substance consisting of Methacrylic Acid & Acrylonitrile Copolymer Aqueous Solution with solids 20+/-1%”

23. 1067 Textile Products

Sr. No. J-8

The description of export item shall be amended to read as under:-

“Acrylic Shawls/ Mufflers/ Scarves”

-:30:-

24. 17 Textile Products

Sr. No. J-301 (Notified vide Public Notice No. 06 Dated:08.05.2003)

The norms covered by this entry shall be substituted by the following:-
Sr.No. Export Item Qty. Import Item Qty. Allowed
J-301 Industrial Workwear made out of: Polyester Cotton Blended High Visibility Dyed Fabric with Reflective Band/Polyester High Visibility Dyed Fabric with Reflective Band. 1 Pc    
a) Boiler Suit

b) Jacket

c) Pant

d) Bib Pant

  a) Relevant Fabric

b) Relevant Reflective Band

a) Relevant Fabric

b) Relevant Reflective Band

a) Relevant Fabric

b) Relevant Reflective Band

a) Relevant Fabric

b) Relevant Reflective Band

4.05 sq. mtr

5cm or 6 cm width X length upto 7mtr.

2.48 sq.mtr.

5cm or 6 cm width X length upto 4.6 mtr

1.687 sq.mtr.

5cm or 6 cm width X length upto 2.4 mtr.

2.30 sq. mtr.

5cm or 6 cm width X length upto 3.6 mtr.

-:31:-

  e) Gilet Waist Coat

f) Short Coat

  a) Relevant Fabric

b) Relevant Reflective Band

a) Relevant Fabric

b) Relevant Reflective Band

1.16 sq. mtr.

5cm or 6 cm width X length upto 2.85 mtr.

2.70 sq.mtr.

5cm or 6 cm width X length upto 4.6 mtr.

Note: The import of reflective band is subject to actual user condition only.

-:32:-

Annexure “B” to the

Public Notice No. 50

Dated: 16/02/2004

CHEMICALS AND ALLIED PRODUCTS

Sr.No. Export Item Qty. Import Item Qty. Allowed
A3290 Para Cresyl Phenyl Acetate 1 kg 1. Para Cresol 0.531 kgm.
A3291 Tri-n-butyl Amine 1 kg 1. n-Butanol 1.268 kg
A3292 Octyl Methoxycinnamate 1 kg 1. Para Anisic Aldehyde

2. Ethyl Acetate

3. Sodium methoxide

4. 2 Ethyl Hexanol

5. Methane Sulphonic Acid

0.600 kg.

0.417 kg.

0.256kg.

0.600 kg

0.133 kg.

  A3293 2-Chloropyridine 1 kg 1. Pyridine

2. Caustic Soda

1.00 kg.

1.40 kg.

 
  A3294 2 Amino-5-Methyl Pyridine 1 kg 1. Sodium Metal

2. Beta Picoline

3. Ammonia

0.900 Kg

2.500 Kg

0.900 Kg

 
  A3295 2 Amino-4-Methyl Pyridine 1 kg 1. Gamma Picoline

OR

a) Denatured Ethyl Alcohol

b) Alumina Silica Catalyst

2. Sodium Metal

3. Ammonia

1.000 Kg

4.253 Kg

0.049 kg

0.495 Kg

0.490 Kg

 
                     

-:33:-

A3296 Ferrous Sulphate + Folic Acid + Zinc Sulphate Monohydrate Time Released Pellets

Each 460 mg of Pellets will contain:

1. Dried Ferrous Sulphate –150 mg

2. Folic acid – 0.50mg

3. Zinc Sulphate Monohydrate -61.8mg

1 kg 1. Dried Ferrous Sulphate

2. Hydroxy Propyl Methyl Cellulose Phthalate

3. Isopropyl Alcohol

0.3333 kg

0.21 kg

1.76 kg

A3297 Diclofenac Sodium Time Released Pellets

Each 300 mg of Pellets contains Diclofenec Sodium 100 mg

1 kg 1. Diclofenac Sodium

2. Hydroxy Propyl Methyl Cellulose Phthalate

3. Isopropyl Alcohol

0.34 kg

0.12 kg

1.41 kg

A3298 Fluorescent Pigment (Yellow HTPA) (Polyester Matrix content 95%) 1 kg 1. Melamine

2. Optical Brightner

3. Solvent Dyes

0.100 kg

0.001 kg

0.029 kg

A3299 Fluorescent Pigment (Magenta HTPA) (Polyester Matrix content 95%) 1 kg 1. Melamine

2. Optical Brightner

3. Basic Dyes

0.100 kg

0.001 kg

0.066 kg

A3300 Fluorescent Pigment (Violet HTPA) (Polyester Matrix content 95%) 1 kg 1. Melamine

2. Optical Brightner

3. Basic Dyes

0.100 kg

0.001 kg

0.0108 kg

-:34:-

Annexure “C” to the

Public Notice No. 50

Dated: 16/02/2004

ENGINEERING PRODUCTS

Sr.No. Export Item Qty. Import Item Qty. Allowed
C1936 Ferro Titanium Cored Wire 1 kg (powder content) Ferro Titanium Powder (Ti-65-72%)

2.CRCA Non-alloy Steel Strips

1.003 Kg./Kg. content in export product

1.008 Kg./Kg. content in export product

C1937 Ballpoint Pen Tips made of brass 1 million number (190Kg.) 1. Round Brass Wire.

2. Tungsten Carbide Balls

3.Cutting Tools, Drill Oil & Chemical

340 Kg

1.02 Million No. (1.02 Kg.)

2% of FOB value

C1938 Plastic Assembly Fitted with Cross Flow Fan, Mounting Bracket, Stepper Motor and Motor 1 No. 1. ABS.

2. ABS/AS-30% GF Fiber

3. Motor HHF-27 BG 83

3. Stepper Motor MP-35A.

5. Rubber Hub 60 x 20L

6. Shaft Dia 6 x 35mm L

7. Plastic Bush Dia 6mm.

8. Balance Weights (3 mm/ 5mm/12mm).

9. Drain Hose 19mm x 720mm

6.72 Kg

896 gm

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

Net to net

C1939 Galvanised Steel Tape (10mm -40mm width) 1 kg 1. Non Alloy Steel Wide Coils.

2. Zinc.

1.07 Kg./Kg. content in export product

As per Engg. Table No.3

-:35:-

C1940 (i) Spring Brake Chamber Type-24/30 L/s (With two Diaphragms) Long Stroke

(ii) Spring Brake Chamber Type-24/30 S/S (With two Diaphragms)

(iii) Spring Brake Chamber Type-30/30 S/S (With two Diaphragms)

1 No. 1. Diaphragms

2. Nol-Alloy HR/ CR Coil

3. Aluminium unwrought or Plate/ Sheet/Strips MS Bar/ Rods

4. MS Bar/ Rods, Spring wire/ Rod/ Bar

Net to net

1.26 Kg/Kg content in the export product

1.12 Kg/Kg content in the export product

1.10 Kg/Kg content in the export product

C1941 Tapping Adaptor WES (Size 1) 1 No. 1. Alloy steel rounds/ bars

2. Torque drive

3. Plate springs

3.39 Kg/kg content in the export product

Net to net

Net to net

C1942 Tapping Adaptor WES (Size 2) 1 No. 1. Alloy steel rounds/ bars

2. Torque drive

3. Plate springs

3.25 Kg/kg content in the export product

Net to net

Net to net

C1943 Tapping Adaptor WEN (Size 1) 1 No. 1. Alloy steel rounds/ bars 3.50 Kg/kg content in the export product
C1944 Tapping Adaptor WE (Size 1) 1 No. 1. Alloy steel rounds/ bars 2.87 Kg/kg content in the export product
C1945 Tapping Adaptor WE (Size 2) 1 No. 1. Alloy steel rounds/ bars 2.59 Kg/kg content in the export product

-:36:-

C1946 Reversible Tapping Chucks TA 12 1 No. 1. Alloy steel rounds/ bars

2. Circlip

3. Deep groove ball bearing

4. Shoulder Sleeve bearing

5. Shim

2.83 Kg/kg content in the export product

Net to net

Net to net

Net to net

Net to net

C1947 Reversible Tapping Chucks TA 20 1 No. 1. Alloy steel rounds/ bars

2. Deep groove ball bearing

3. Shoulder Sleeve bearing

4. Shim

5. Disc./Retaining ring

2.47 Kg/kg content in the export product

Net to net

Net to net

Net to net

Net to net

C1948 Adaptor Sub-assembly WEN 101 BG 1 No. 1. Alloy steel rounds/ bars 2.68 Kg/kg content in the export product

-:37:-

Annexure “D” to the

Public Notice No. 50

Dated: 16/02/2004

FOOD PRODUCTS

Sr.No. Export Item Qty. Import Item Qty. Allowed
E-113 Processed filtered Honey 1 kg 1. Raw Honey (unprocessed, unfiltered) 1.05 Kg.
E-114 Oleoresin Clove 1 kg 1. Clove buds 4.76 Kg.

-:38:-

Annexure “E” to the

Public Notice No. 50

Dated: 16/02/2004

TEXTILE PRODUCTS

Sr.No. Export Item Qty. Import Item Qty. Allowed
J-358 Dipped Nylon fabrics made out of N6/N66 yarn of 210D-1680D 1 kg 1. Grey Nylon Fabric made out of N6/N66 yarn of 210D-1680D

OR

N6/N66 Multi

filament yarn of

210D-1680D

2. D.Vinyl pyridine latex (41% DRC)

3. Resorcinol

4. Formaldehyde (37% Dry)

0.919kg. per kg. of resultant product

0.951 kg. per kg. of resultant product

0.133 kg per kg. of resultant product

0.0147 kg. per kg. of resultant product

0.0076 kg. per kg. of resultant product

-:39:-

Annexure “F” to the

Public Notice No. 50

Dated: 16/02/2004

MISCELLANEOUS PRODUCTS

Sr.No. Export Item Qty. Import Item Qty. Allowed
K-161 Jute fabric 1 kg 1. Evoral FLT

2. Verdicker

3. Afrotin ZNK

0.141 Kg

0.0049 Kg

0.028 Kg

K-162 Jute Hessian Bags 1 kg 1. Evoral FLT

2. Verdicker

3. Afrotin ZNK

0.12 Kg

0.0042 Kg

0.024 Kg

K-163 Carpet Backing Cloth 1 kg 1. Jute Yarn 1.05 Kgs.

*****

More Under DGFT

Posted Under

Category : DGFT (3501)
Tags : DGFT Notifications (3444)

Leave a Reply

Your email address will not be published. Required fields are marked *