(TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY PART-1-SECTION-1)
GOVERNMENT OF INDIA
MINISTRY OF COMMERCE & INDUSTRY
DEPARTMENT OF COMMERCE
PUBLIC NOTICE NO. 38 (RE-2001)/1997-2002
NEW DELHI: DATED: 01/11/2000.
Attention is invited to Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time.
2. In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended.
3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/ corrections at appropriate places as mentioned in Annexure “A” to this Public Notice shall be made.
4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-
CHEMICALS AND ALLIED PRODUCTS
After the existing entry at Sr.No.A-2475, the new entries from Sr.No.A-2476 to A-2482 shall be added as per Annexure ”B” to this Public Notice.
ENGINEERING PRODUCTS
After the existing entry at Sr.No.C-1548, the new entries from Sr.No.C-1549 to A-1574 shall be added as per Annexure ”C” to this Public Notice.
FOOD PRODUCTS
After the existing entry at Sr.No.E-80, the new entry Sr.No.E-81 shall be added as per Annexure ”D” to this Public Notice.
PLASTIC PRODUCTS
After the existing entry at Sr.No.H-421, the new entries Sr.No.H-422 to H-423 shall be added as per Annexure ”E” to this Public Notice.
TEXTILE PRODUCTS
After the existing entry at Sr.No.J-331, the new entries from Sr.No.J-332 to J-333 shall be added as per Annexure ”F” to this Public Notice.
5. This issues in public interest.
Sd/-
(N.L. LAKHANPAL)
DIRECTOR GENERAL OF FOREIGN TRADE
(S.L. GUPTA)
DIRECTOR GENERAL OF FOREIGN TRADE
FOR DIRECTOR GENERAL OF FOREIGN TRADE
Annexure “A” to the Public Notice No.38 Dated: 01/11/2000
AMENDMENTS/CORRECTIONS
| Sr.
No. |
Page
No. |
Reference | Amendments/Corrections |
| 1 | 2 | 3 | 4 |
| 1. | 35 | Chemicals & Allied Products
Sr.No.A175 |
The description of import item at Sr. No. 1 shall be amended to read as under:-
“Propiophenone”. |
| 2. | 46 | Chemicals & Allied Products
Sr.No.A264 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A264 | Ibuprofen (Neopentyl Glycol route) | 1 kg | 1. Isobutyl Benzene
2. Propionic Acid OR 2. a) 2-Chloro propionic Acid b) Thionyl Chloride OR 2. 2-Chloropropionyl Chloride 3. Neopentyl Glycol 4. Methylene Chloride/ Ethylene Dichloride/ Methanol |
0.952 kg
0.897 kg 0.897 kg 1.07 kg 0.923 kg 0.89 kg 1.00 kg |
| 3. | 46 | Chemicals & Allied Products
Sr.No.A265 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A265 | Ibuprofen (Nickel Sodium Cyanide Route) | 1 kg | 1. Isobutyl Benzene
2. Acetyl Chloride 3. Sodium Cyanide 4. Tetra Butyl Ammonium Bromide 5. Nickel Metal 6. Isopropyl Alcohol/ Methanol/ Methylene Chloride |
0.952 kg
0.875 kg 0.809 kg 0.071 kg 0.042 kg 1.00 kg |
| 4. | 46 | Chemicals & Allied Products
Sr.No.A266 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A266 | Ibuprofen (Sodium Metal Route) | 1 kg | 1. Isobutyl Benzene
2. Acetyl Chloride OR Acetic Acid 3. Sodium Metal 4. a) Monochloro Acetic Acid b) Isopropyl Alcohol OR 4. Isopropyl Chloro Acetate 5. Isopropyl Alcohol/ Acetone |
0.952 kg
0.714 kg 0.952 kg 0.285 kg 1.25 kg 0.952 kg 1.80 kg 1.00 kg |
| 5. | 161 | Chemicals & Allied Products
Sr.No.A1250 |
The description of export item shall be amended to read as under:-
“Liner Alkyl Benzene Sulphonic Acid”. |
| 6. | 201 | Chemicals & Allied Products
Sr.No.A1637 |
The quantity of import item at Sr. No. 1 shall be amended to read as under:-
“0.952 kg”. |
| 7. | 217-218 | Chemicals & Allied Products
Sr.No.A1701 |
The following Note 2 shall be added below this norm:-
“Note: 2. Within the total quantity of Natural/ Synthetic Rubber (SBR 1502/ 1712) at Sr. No. 1 of the SION, PBR shall be allowed upto 0.170 kg”. |
| 8. | 263 | Chemicals & Allied Products
Sr.No.A1969 |
The quantity of import item at Sr. No. 1 shall be amended to read as under:-
“0.816 kg”. |
| 9. | 269 | Chemicals & Allied Products
Sr.No.A2016 |
The norm covered by this entry shall be deleted. |
| 10. | 269 | Chemicals & Allied Products
Sr.No.A2017 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2017 | Cefradine | 1 kg | 1. 7-ADCA
OR Raw materials for 7-ADCA as per Sr. No. A-35 2. Hexamethyl Disilazane |
0.715 kg
0.198 kg |
| 3. Trimethyl Chlorosilane
OR Trimethyl Guanidine 4. a) D(-) Dihydro Phenyl Glycine Base b) Methyl Aceto Acetate OR 4.D(-) Dihydro Phenyl Glycine Dane salt 5.Ethyl Chloroformate OR 5. a) 2,6 Lutidine b) Pivalyl Chloride 6. DMF Acetone 7. Activated Carbon |
0.25 kg
0.706 kg 0.615 kg 1.06 kg 0.425 kg 0.03 kg 0.417 kg 2.85 kg 0.032 kg |
| 11. | 270-271 | Chemicals & Allied Products
Sr.No.A2024 |
After import item at Sr. No. 8 the following items (with quantity) shall be added:-
“9. Dimethyl Carbonate – 2.25 kg 10. 2, Acetonitrile – 1.62 kg”. |
| 12. | 278 | Chemicals & Allied Products
Sr.No.A2090 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2090 | Benzyl Cyanides | 1 kg | 1. Benzyl Chloride
OR Toluene 2. Sodium Cyanide 3. Soda Ash 4. Triethyl Amine |
1.253 kg
1.06 kg 0.485 kg 0.019 kg 1.012 kg |
| 13. | 288 | Chemicals & Allied Products
Sr.No.A2155 |
The norms covered by this entry shall be deleted. |
| 14. | 291-292 | Chemicals & Allied Products
Sr.No.A2182 |
The description of import item at Sr. No. 7 (with quantity) shall be amended to read as under:-
“7. Ethyl Acetate – 4.50 kg OR Methyl Isobutyl – 3.754 kg”. Ketone (MIBK) |
| 15. | 296 | Chemicals & Allied Products
Sr.No.A2211 |
The description of import item at Sr. No. 1 (without any change in quantity) shall be amended to read as under:-
“1. Caustic Soda – 0.467 kg OR Soda ash” |
| 16. | 297 | Chemicals & Allied Products
Sr.No.A2217 |
The description of export item shall be amended to read as under:-
“Choline Di-Chloride (2-Chloroethyl Trimethyl Ammonium Chloride)”. |
| 17. | 302 | Chemicals & Allied Products
Sr.No.A2260 |
1. The description of export item shall be amended to read as under:-
“Cephradine Arginine Sterile” 2. The description of import item at Sr. No. 4 (without any change in quantity) shall be amended to read as under:- “L-Arginine (Pyrogen Free)”. |
| 18. | 311 | Chemicals & Allied Products
Sr.No.A2319 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2319 | Patent Blue V C. I. No. 42051 (Dye Content 89%) | 1 kg | 1. Meta Hydroxy Benzaldehyde | 0.435 kg |
| 19. | 314 | Chemicals & Allied Products
Sr.No.A2339 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2339 | Patent Blue V C. I. No. 42051 (Dye Content 89%) | kg | 1.Meta Hydroxy Benzaldehyde | 0.435 kg |
| 20. | 314 | Chemicals & Allied Products
Sr.No.A2340 |
After import item at Sr. No. 2 the following item (with quantity) shall be added:-
“3. Twitchel Oil – 0.02 kg/kg of export product”. |
| 21. | 318 | Chemicals & Allied Products
Sr.No.A2373 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2373 | Sterile Ceftriaxone Sodium | 1 kg | 1. 7-ACA
2. 2,5-Dihydro-2- Methyl-3- Mercapto-5-oxo-6-Hydroxy 1,2,4-Triazine (TAA) 3. Boron Trifluoride Gas |
0.668 kg
0.36 kg 0.611 kg |
| 4. Mercapto Benzothiazole-YL-2- (2-Amino-4-Thiazole) Methoxy Imino Acetate (MAEM)
OR 4. (i) 2-(2-Amino- thiuazole-4-YL- Methoxyimino Acetic Acid Anhydrous (MIATA) (ii) Thio Bis Benzo Thiazole (PERKACIT) (iii) Triphenyl Phosphine (iv) Triethyl Amine (v) Methylene Chloride 5. Triethyl Amine 6. Acetonitrile/ Dimethyl Acetamide 7. Tetrahydro Furan 8. Acetone 9. Methylene Chloride 10. Sodium Ethyl Hexanoate 11. Activated Carbon |
0.81 kg
0.57 kg 1.16 kg 0.87 kg 0.28 kg 4.00 kg 0.514 kg 2.60 kg 1.23 kg 11.50 kg 2.00 kg 0.684 kg 0.100 kg |
| 22. | 13 | Chemicals & Allied Products
Sr.No.A 2450 Introduced vide Public Notice No. 32 dt. 01.09.2000) |
The description of export item shall be amended to read as under:-
“Roxarasone USP (3-Nitro-4- Hydroxyphenylarsonic Acid)”. |
| 23. | 390-391 | Electronics Products
Sr.No.B-131 |
(i). The description of export item shall be amended to read as under:-
“Telephone Instrument (Push Button Telephone) including CKD/SKD thereof ”. (ii). At the end of this entry the following Note shall be added:- “Note:Various parts of Telephone instrument when exported in CKD/SKD condition should however be covered under single shipping bill evidencing export of complete telephone instrument”. |
| 24. | 463 | Engineering Product
Sr.No.C252 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C252 | Paper covered Rectangular/ round Copper conductors | 1 kg | 1. Continuous Cast Copper Rods/ Bars/ Cathodes (EC Grade)
2. Insulating Kraft Paper |
1.02 kg/kg content in the export product
1.02 kg/kg content in the export product |
| 25. | 498 | Engineering Product
Sr.No.C362 |
(i). The description of export item shall be corrected to read as under:-
“Casing Pipes of OD 114.30 mm to 508 mm equivalent to 2-3/8” OD to 4-1/2” OD”. (ii) The description of import item at Sr. No. 1 (without any change in quantity) shall be corrected to read as:- “1. Plain End Seamless Pipes of relevant Dia”. |
| (iii)After import item at Sr. No. 3 the following item (with quantity) shall be added:-
“4. Cross Overs – Net to Net with accountability in the export product upto a maximum of 5 Nos.”. |
| 26. | 498 | Engineering Product
Sr.No.C366 |
(i).The description of export item shall be corrected to read as under:-
“Drill Pipes of OD 60.325 to 168.275 mm OD equivalent to 2-3/8” OD to 6-5/8” OD”. (ii) The description of import item at Sr. No. 1 (without any change in quantity) shall be corrected to read as:- “1. Plain End Seamless Pipes of relevant Dia”. |
| 27. | 505 | Engineering Product
Sr.No.C391 |
(i).The description of export item shall be corrected to read as under:-
“Production tubing of OD 60.325 mm to 114.3 mm OD equivalent to 2-3/8” OD to 4-1/2” OD”. (ii) The description of import item at Sr. No. 1 (without any change in quantity) shall be corrected to read as:- “1. Plain End Seamless Pipes of relevant Dia”. |
| (iii)After import item at Sr. No. 4 the following item (with quantity) shall be added:-
“5. Cross Overs – Net to Net with accountability in the export product upto a maximum of 5 Nos.”. |
| 28. | 641 | Engineering Product
Sr.No.C978 |
1. The description of import item at Sr. No. 1 (without any change in quantity) shall be amended to read as under:-
“1. Phenol Formaldehyde Resin”. |
| 29. | 642 | Engineering Product
Sr.No.C981 |
1. The description of import item at Sr. No. 1 (without any change in quantity) shall be amended to read as under:-
“1. Phenol Formaldehyde Resin”. |
| 30. | 642 | Engineering Product
Sr.No.C982 |
1. The description of import item at Sr. No. 1 (without any change in quantity) shall be amended to read as under:-
“1. Phenol Formaldehyde Resin”. |
| 31. | 740 | Engineering Product
Sr.No.C1408 |
(i).The description of export item shall be corrected to read as under:-
“Steel Cable Drum in various sizes”. (ii).The description of import at Sr. No. 1 (without any change in quantity) shall be amended to read as under:- “CRCA Non Alloy Steel Sheet/Coil”. (iii).The description of import item at Sr. No.2 (without any change in quantity) shall be amended to read as under:- “2. HR Non Alloy Steel Sheet/Coil”. |
| 32. | 740 | Engineering Product
Sr.No.C1409 |
The quantity of export item shall be corrected to read as under:-
“1000 Kgs” |
| 33. | 6 | Food Product
Sr.No.E-11 as amended vide Public Notice No. 25 dt. 01/08/2000 |
The norm covered by this entry shall be substituted by the following:- |
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| E-11 | Chutneys/condiments paste/ Vegetables/ pickles packed in OTS cans/ Glass containers/ packed in relevant packing material | 1 kg | 1. Tin plate (OTS quality)
OR Relevant Tin Containers OR Relevant Glass Containers OR Relevant packing materials namely LDPE/HDPE/ PP Granules 2. OTS cans/Tin Corrugated Board other than Ivory Board |
1.10 kg/kg weight of tin packing in the export product
Net +1% wastage Net +1% wastage Net to net with 1% wastage 1.05 kg/kg weight of the relevant packing material Net +1% wastage |
| 34. | 6 | Textile Product
Sr.No.J21 as amended vide Public Notice No. 25 dt. 01/08/2000 |
After import item at Sr. No. 2 the following import item (with quantity) shall be added:-
“3. Raw Cotton – 1.26 kg/kg content in export product”. |
Annexure “B” to the Public Notice No.38 Dated: 01/11/2000
CHEMICALS AND ALLIED PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2476 | Betamethasone 17 valerate | 1 kg | 1. 9,11 Epoxide
2. Butyl Ortho Valerate 3. Charcoal 4. Potassium Hydroxide 5. Acetone 6. Ethyl Acetate 7. Methylene Chloride |
1.10 kg
0.96 kg 0.10 kg 3.71 kg 1.13 kg 2.50 kg 3.52 kg |
| A2477 | DL-Naproxen | 1 kg | 1. Beta Naphtohol
2. Methanol 3. Acetyl Chloride 4. Nitromethane 5. Potassium Hydroxide 6. 2-Butanol 7. Hydroxyl Amine CH1 8. EDC 9. Toulene |
2.50 kg
6.00 kg 1.38 kg 0.96 kg 1.73 kg 3.07 kg 1.03 kg 1.97 kg 1.64 kg |
| A2478 | Rubber Backed/ Embedded Coir Mat, Matting/ Rugs/Carpets | 1 kg | 1. Natural Rubber/ Synthetic Rubber (SBR-1502/1712)
2. Neoprene Rubber 3. Zinc Oxide 4. Carbon Black 5. Antioxident/ Accelerator/ Retarder/ Peptisizer |
0.655 kg of Rubber compound in the export product
0.025 kg 0.212 kg 0.170 kg 0.010 kg |
| 6. Misc. Chemicals : (Microcry-stallin wax Pigment and softners Sulphur- Stearic acid solvents, Plasticizers- Synthetic resins, bounding/ coupling agents activators & fillers, dip chemicals (excluding resorcinol) mould release agents tackiffiers and catalysts and syloff. | 0.042 kg | |||
| Note: For import of item at Sr. No. (1) above the applicant shall furnish bifurcated quantities of Natural Rubber and Synthetic Rubber (SBR-1502/1712) in a ratio which does not exceed 0.655 kg rubber Compound for the export of 1 kg of resultant product. The exporter shall also get the consumption of similar ratio certified in the Shipping Bill of Export. | ||||
| A2479 | Toluene Di Isocyanate(TDI) | 1 kg | 1. Toluene
2. Palladium Chloride Catalyst |
0.668 kg
5.54 grams |
| A2480 | Meta Nitro Benzoyl Chloride | 1 kg | 1. Meta Nitro Benzoic Acid | 1 kg |
| A2481 | Para Nitro Benzoyl Chloride | 1 kg | 1. Para Nitro Benzoic
Acid |
0.948 kg |
| A2482 | Zinc Dust | 1 kg | 1. Zinc | 1.02 kg |
Annexure “C” to the Public Notice No.38 Dated: 01/11/2000
ENGINEERING PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty Allowed | ||
| C1549 | Pressure Cooker made of Aluminium Body & Stainless Steel (AISI 304 Grade) Lid | 1 kg | 1. Aluminium Circles, commercial grade
2. Non magnetic Stainless Steel Sheets/ Coils AISI 304 grade 1/1.25 MM thick |
1.07 kg/kg
content in the export product 1.25 kg/kg content in the export product |
||
| C1550 | Carbon Steel (MS) Fabricated Tower Packings | 1 MT | 1. CRCA Carbon Steel (MS) Sheets/ Strips | 1.02 MT per MT of export product. | ||
| C1551 | Floppy Diskettes Loaded with software (including information/data) | 1 No. | 1.Blank Floppy of Diskettes of relevant specification (including size) | 1 No. | ||
| C1552 | Battery type HBL-SZ45 22.5V. 45 AH (Silver Oxide zinc air craft Batteries) | 1 No. | 1. Silver Ingots/ sheets
OR Used life expired silver oxide zinc aircraft batteries 15 STS S 45 B or ABL/HBL SZ 45 2. Zinc Oxide 3. Nylon Moulding granules/ powder 4. Cellophane (C-19/350 P00) Regenerated Cellulose film 5. Grade-169-02 paper rolls/ filter reels |
4.7527 kgs.
1.41 Nos. 3.81 kgs. 4.000 kgs. 1.05 kgs. 8.200SQM |
||
| 6. Metregrip 303 LV epoxy Adhesive acticator
7. Metregrip 303 LV epoxy Adhesive base |
0.040 Ltrs.
0.40 Ltrs. |
|||||
| C1553 | Battery type NCSP B 25150 (Nickel Cadmium Batteries) 24 Volts. 25AH | 1 No. | 1. Nickel fibremat fibrex
OR Nickel Powder 2. Nylon Moulding granules type Zytel 151 NC 010 3. Nonwoven Separator (Viledon)FS 2115 4. Nickel Powder type 255/287/210 5. Celegard 3400 film 6. Battery Connectors 7. Metregrip 303 LV epoxy Adhesive acticator 8. Metregrip 303 LV epoxy Adhesive base |
27.05 Sq.ft.
3.12 kgs. 3.70 kgs. 12.40 Sq/ Mtrs. 2.64 kgs. 6.20 Sq.Mtr. 1 No. 0.52 Ltrs. 0.52 Ltrs. |
||
| C1554 | Shock Absorbers for two wheelers/three wheelers | 1 No. | 1. Bump Stop (Hexagon RSI) | 1 No. | ||
| Note: The import of components shall be permitted on net to net basis without any wastage with accountability clause. | ||||||
| C1555 | Strut with Spring Assembly for Van | 1 No. | 1. Reverse DU Bush
2. Rod Seal 20 MM 3. Bushing 20 MM |
1 No.
1 No. 1 No. |
||
| Note: The import of components shall be permitted on net to net basis without any wastage with accountability clause. | ||||||
| C1556 | Shock Absorbers (Gas filled) for Multi Utility vehicle (MUV) | 1 No. | 1. Piston Rod Seal | 1 No. | ||
| Note: The import of components shall be permitted on net to net basis without any wastage with accountability clause. | ||||||
| C1557 | Shock Absorbers for Cars/Jeep-conventional | 1 No. | 1. M. L. Seal | 1 No. | ||
| Note: The import of components shall be permitted on net to net basis without any wastage with accountability clause. | ||||||
| C1558 | Circuit Breakers Upto & including 200KVA | 1 No. | 1. Copper wire Rods/ cathodes
2. Copper Strips 3. Plain Copper stranded Flex round (Braided Copper) 4. Aluminium Sheets/ Ingots 5. CRCA Sheets |
1.01 kg/kg content in the export product
1 kg/kg content in the export product 1 kg/kg content in the export product 1.01 kg/kg content in the export product 1.01 kg/kg content in the export product |
||
| 6. Thermostat Metals
7. Electrical Contact Buttons/ Square Buttons/ Round Buttons 8. Fasteners/Tab Nuts 9. Extension Springs 10.Secondary Latch Spring 11.Contact Arm Springs |
Net to net
Net to net Net to net Net to net Net to net Net to net |
|||||
| Note: The import of components shall be permitted on net to net basis with accountability clause and the type, technical specifications (including part No., if any), etc., of the components sought for import should conform to those utilised in the manufacture of the resultant product, which should be reflected in the export documents (shipping bills) also. | ||||||
| C1559 | 12 Fiber Optical Fibre Armoured Cable Cable outer Dia: 13.8 MM +/- 1 MM 171 kg/km +/-5% Consisting of two PBT Tube of 2.8 mm OD | 1000 MTR=1 KM | 1. Single Mode Optical Fibre 250 micron (Natural Colour)
2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer & Chrome Plated 9. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) |
12.60 km
8.30 kg 0.17 kg 0.13 kg 5.74 kg 33.60SQ.MTR 90.74 kg 56.62 kg 2.91 kg |
||
| 10. Water Swellable Yarn
11. F.R.P. Rod (2MM) 12. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 13. Hot Foil Marking Tape White/Black |
2.69 kg
1.05 KM 1.08 kg 1.05 KM |
|||||
| C1560 | 24 Fiber Optical Fibre Armoured Cable Cable outer Dia: 14 MM +/- 1 MM 173 kg/km +/-5% Consisting of two PBT Tube of 2.8 mm OD | 1000 MTR=1 KM | 1. Single Mode Optical Fibre 250 micron (Natural Colour)
2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer & Chrome Plated 9. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 10. Water Swellable Yarn 11. F.R.P. Rod (2MM) |
25.20 km
8.30 kg 0.17 kg 0.25 kg 5.74 kg 36.75SQ.MTR 91.94 kg 56.62 kg 2.91 kg 2.69 kg. 1.05 KM |
||
| 12. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play
13. Hot Foil Marking Tape White/Black |
1.08 kg
1.05 KM |
|||||
| C1561 | 48 Fiber Optical Fibre Armoured Cable Cable outer Dia: 14 MM +/- 1 MM 177 kg/km +/-5% Consisting of four PBT Tube of 2.8 mm OD | 1000 MTR=1 KM | 1. Single Mode Optical Fibre 250 micron (Natural Colour)
2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer & Chrome Plated 9. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 10. Water Swellable Yarn 11. F.R.P. Rod (2MM) |
50.40 km
16.59 kg 0.33 kg 0.50 kg 11.48 kg 36.75SQ.MTR 79.52 kg 56.62 kg 2.91 kg 2.69 kg. 1.05 KM |
||
| 12. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play
13. Hot Foil Marking Tape White/Black |
1.08 kg
1.05 KM |
|||||
| C1562 | 72 Fiber Optical Fibre Armoured Cable Cable outer Dia: 14.8 MM +/- 1 MM 212 kg/km +/-5% Consisting of six PBT Tube of 2.8 mm OD | 1000 MTR=1 KM | 1. Single Mode Optical Fibre 250 micron (Natural Colour)
2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer & Chrome Plated 9. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 10. Water Swellable Yarn 11. F.R.P. Rod (2MM) |
75.60 km
24.89 kg 0.50 kg 0.75 kg 17.22 kg 39.90SQ.MTR 82.54 kg 64.71 kg 2.91 kg 4.03 kg. 1.05 KM |
||
| 12. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play
13. Hot Foil Marking Tape White/Black |
1.08 kg
1.05 KM |
|||||
| C1563 | 96 Fiber Optical Fibre Armoured Cable Cable outer Dia: 16.3 MM +/- 1 MM 258 kg/km +/-5% Consisting of eight PBT Tubes of 2.8 mm OD | 1000 MTR=1 KM | 1. Single Mode Optical Fibre 250 micron (Natural Colour)
2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer & Chrome Plated 9. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 10. Water Swellable Yarn 11. F.R.P. Rod (2MM) |
100.8 km
33.10 kg 0.66 kg 1.01 kg 22.96 kg 44.10SQ.MTR 102.15 kg 74.42 kg 2.91 kg 6.05 kg. 1.05 KM |
||
| 12. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play
13. Hot Foil Marking Tape White/Black |
1.08 kg
1.05 KM |
|||||
| C1564 | 144 Fiber Optical Fibre Armoured Cable Cable outer Dia: 19.2 MM +/- 1 MM 348 kg/km +/-5% Consisting of 12 PBT Tube of 2.8 mm OD | 1000 MTR=1 KM | 1. Single Mode Optical Fibre 250 micron (Natural Colour)
2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer & Chrome Plated 9. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 10. Water Swellable Yarn 11. F.R.P. Rod (2MM) |
151.2 km
49.78 kg 1.00 kg 1.52 kg 34.44 kg 60.90SQ.MTR 141.71 kg 93.83 kg 2.91 kg 7.39 kg. 1.05 KM |
| 12. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play
13. Hot Foil Marking Tape White/Black |
1.08 kg
1.05 KM |
| C1565 | 216 Fiber Optical Fibre Armoured Cable Cable outer Dia: 20.2 MM +/- 1 MM 411 kg/km +/-5% Consisting of nine PBT Tube of 4 mm OD | 1000 MTR=1 KM | 1. Single Mode Optical Fibre 250 micron (Natural Colour)
2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer & Chrome Plated 9. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 10. Water Swellable Yarn 11. F.R.P. Rod (3MM) |
226.8 km
68.06 kg 1.36 kg 2.28 kg 58.11 kg 69.30SQ.MTR 132.79 kg 119.71 kg 2.91 kg 7.39 kg. 1.05 KM |
| 12. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play
13. Hot Foil Marking Tape White/Black |
1.08 kg
1.05 KM |
| C1566 | 288 Fiber Optical Fibre Armoured Cable Cable outer Dia: 24.6 MM +/- 1 MM 577 kg/km +/-5% Consisting of 12 PBT Tube of 4 mm OD | 1000 MTR=1 KM | 1. Single Mode Optical Fibre 250 micron (Natural Colour)
2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer & Chrome Plated 9. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 10. Water Swellable Yarn 11. F.R.P. Rod (3MM) |
302.4 km
90.74 kg 1.81 kg 3.04 kg 77.48 kg 84 SQ.MTR 234.33 kg 135.89 kg 2.91 kg 14.78 kg. 1.05 KM |
| 12. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play
13. Hot Foil Marking Tape White/Black |
1.08 kg
1.05 KM |
| C1567 | 18 Fiber Optical Fibre unarmoured Cable Cable outer Dia: 11.2 MM +/- 1 MM 95 kg/km +/-5% Consisting of 3 PBT Tube of 2.8 mm OD | 1000 MTR=1 KM | 1. Single Mode Optical Fibre 250 micron (Natural Colour)
2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 9. Water Swellable Yarn 10. F.R.P. Rod (2MM) |
18.90 km
12.44 kg 0.25 kg 0.19 kg 8.61 kg 33.60SQ.MTR 61.05 kg 3.63 kg 2.02 kg. 1.05 KM |
| 11. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play
12. Hot Foil Marking Tape White/Black |
0.72 kg
1.05 KM |
| C1568 | 36 Fiber Optical Fibre unarmoured Cable Cable outer Dia: 11.2 MM +/- 1 MM 97 kg/km +/-5% Consisting of 3 PBT Tube of 2.8 mm OD | 1000 MTR=1 KM | 1. Single Mode Optical Fibre 250 micron (Natural Colour)
2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 9. Water Swellable Yarn 10. F.R.P. Rod (2MM) |
37.8 km
12.44 kg 0.25 kg 0.38 kg 8.61 kg 33.60SQ.MTR 61.05 kg 3.63 kg 2.02 kg. 1.05 KM |
| 11. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play
12. Hot Foil Marking Tape White/Black |
0.72 kg
1.05 KM |
| C1569 | 48 Fiber Optical Fibre unarmoured Cable Cable outer Dia: 11.2 MM +/- 1 MM 103 kg/km +/-5% Consisting of 4 PBT Tube of 2.8 mm OD | 1000 MTR=1 KM | 1. Single Mode Optical Fibre 250 micron (Natural Colour)
2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 9. Water Swellable Yarn 10. F.R.P. Rod (2MM) |
50.4 km
16.59 kg 0.33 kg 0.50 kg 11.48 kg 36.75SQ.MTR 54.85 kg 1.05 kg 1.05 kg. 1.05 KM |
| 11. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play
12. Hot Foil Marking Tape White/Black |
0.72 kg
1.05 KM |
| C1570 | 72 Fiber Optical Fibre unarmoured Cable Cable outer Dia: 12.2 MM +/- 1 MM 127 kg/km +/-5% Consisting of 6 PBT Tube of 2.8 mm OD | 1000 MTR=1 KM | 1. Single Mode Optical Fibre 250 micron (Natural Colour)
2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 9. Water Swellable Yarn 10. F.R.P. Rod (2MM) |
75.6 km
24.89 kg 0.50 kg 0.75 kg 17.22 kg 39.90SQ.MTR 57.66 kg 2.91 kg 1.05 kg. 1.05 KM |
| 11. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play
12. Hot Foil Marking Tape White/Black |
0.72 kg
1.05 KM |
| C1571 | 120 Fiber Optical Fibre unarmoured Cable Cable outer Dia: 16.6 MM +/- 1 MM 206 kg/km +/-5% Consisting of 10 PBT Tube of 2.8 mm OD | 1000 MTR=1 KM | 1. Single Mode Optical Fibre 250 micron (Natural Colour)
2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 9. Water Swellable Yarn 10. F.R.P. Rod (2MM) |
126.00 km
41.48 kg 0.83 kg 1.05 kg 28.70 kg 50.40SQ.MTR 106.57 kg 1.45 kg 6.05 kg. 1.05 KM |
| 11. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play
12. Hot Foil Marking Tape White/Black |
0.72 kg
1.05 KM |
| C1572 | 216 Fiber Optical Fibre unarmoured Cable Cable outer Dia: 19 MM +/- 1 MM 301 kg/km +/-5% Consisting of 9 PBT Tube of 4 mm OD | 1000 MTR=1 KM | 1. Single Mode Optical Fibre 250 micron (Natural Colour)
2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 9. Water Swellable Yarn 10. F.R.P. Rod (3MM) |
226.8 km
68.06 kg 1.05 kg 2.28 kg 58.11 kg 60.90SQ.MTR 134.68 kg 1.05 kg 12.77 kg. 1.05 KM |
| 11. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play
12. Hot Foil Marking Tape White/Black |
0.72 kg
1.05 KM |
| C1573 | 288 Fiber Optical Fibre unarmoured Cable Cable outer Dia: 22.8 MM +/- 1 MM 412 kg/km +/-5% Consisting of 12 PBT Tube of 4 mm OD | 1000 MTR=1 KM | 1. Single Mode Optical Fibre 250 micron (Natural Colour)
2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 9. Water Swellable Yarn 10. F.R.P. Rod (3MM) |
302.4 km
90.74 kg 1.81 kg 3.04 kg 77.48 kg 69.00SQ.MTR 201.87 kg 1.45 kg 12.77 kg. 1.05 KM |
| 11. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play
12. Hot Foil Marking Tape White/Black |
0.72 kg
1.05 KM |
|||
| C1574 | Bicycle Tube valve made of Brass | 1 kg | 1. Brass Scrap | 1.20 kg per kg. of export product |
Annexure “D” to the Public Notice No.38 Dated: 01/11/2000
FOOD PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty Allowed |
| E81 | Psyllium Husk/ powder/ Isabgol Husk/ powder | 1 MT | 1. Methyl Bromide
2. Ethylene Oxide 3. HDP/LDP/PP 4. Card Board/ Kraft Paper other than ivory board and white board |
250 gms
50 gms 1.05 kg/kg weight of relevant packing 1.1 kg/kg weight of relevant packing |
Annexure “E” to the Public Notice No.38 Dated: 01/11/2000
PLASTIC PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty Allowed |
| H422 | Nylon-6 Dipped Tyre Cord Fabric | 1 MT | 1. Nylon-6 Yarn
2. VP Latex |
1.02 MT/MT
40 kg/MT |
| H423 | PVDC coated PVC film (containing 0.900 kg PVC film and 0.100 kg PVDC coating) | 1 kg | 1. PVC Film
OR 1. a) PVC Resin b) Epoxidised Soyabean Oil c) PVC Stabilizer d) Pigment e) PVC processing aid f) PVC Impact modifier g) Lubricant 2. Coating materials 2. a) PVDC aqueous dispersion (Total solids 55+/- 2%) b)Aqueous dispersion of vinylidene chloride) (Total Solid content 60+/- 1%) a) Aqueous dispersion Vinylidenns chloride – |
0.990 kg
0.8217 kg 0.0545 kg 0.0297 kg 0.0049 kg 0.0158 kg 0.1010 kg 0.0119 kg 0.0204 kg 0.1447 kg 0.0217 kg |
| Methacrylate
Copolymer (Total Solid Content 55+/- 1%) OR 2. a) Primer – PVDC dispersions in ethyl acetate (Total solid content 50 +/-2%) b) Hardner – PVDC dispersions in ethyl acetate (Total solid content 75 +/-2%) c) Aqueous dispersion Vinylidene chloride- Methacrylate Copolymer (Total Solid Content 55 +/- 1%) d) Ethyl acetate solvent |
0.0224 kg
0.1158 kg 0.0217 kg 0.0400 kg |
|||
| Note: 1. In case of variation in the weight of PVC film, the qty of items of import at S. No. 1 or 1 (a to g) shall be worked out adopting the following:
A x B/C Where A = Quantity allowed for 0.900 kg of PVC film. B = Weight of PVC film in one kg of export product. C = 0.900 Note: 2. Increase of variation in the weight of PVDC coating in the export product, the quantity of inputs at S. No. 2 (a to c) and 2 (a to d) shall be worked out by adopting the following: D X E /F Where D = quantity allowed for 0.100 kg PVC coating E = Weight of PVDC coating in the export product F = 0.100 Note: 3. In case of variation in the solid content of solid content at S. No. 2 quantity shall be worked out on pro-rata basis. |
||||
Annexure “F” to the Public Notice No.38 Dated: 01/11/2000
TEXTILE PRODUCTS
| Sr.No. | Export Item | Qty. | Import Item | Qty Allowed |
| J332 | Ladies wrap skirt | 1 No. | 1. Fabrics to be used in the garment | 1.5 sq. mtr. |
| J333 | Ladies Chemise | 1 No. | 1. Fabrics to be used in the garment | 1.50 sq. mtr. |
